physics

posted by .

A sign is held in position by 3 cables sign weight 215N, what is the tension in each of the 3 cables

  • physics -

    it depends on where the cables are attached, and how.

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. Physics

    A loaded elevator with very worn cables has a total mass of 3000 kg, and the cables can withstand a maximum total tension of 40,000 N. (a) What is the maximum upward acceleration for the elevator if the cables are not to break?
  2. physics

    A loaded elevator with very worn cables has a total mass of 2200kg, and the cables can withstand a maximum tension 28 000N a) what would be the maximum upward acceleration for the elevator if the cables are not to break?
  3. physics

    an electric sign weighing 200 newtons is supported by two slanting cables. each cable is attached to the same point of the sign and makes a 45 degree angle with the horizontal. what is the component of the force exerted by the sign …
  4. physics

    a 20 kg loudspeaker is suspended 2m below a ceiling by two 3m-long cables that angle outward at equal angles. what is the tension in the cables?
  5. physics

    a light fixtures of 80.o N hangs from a verttical chain that is tied to two other cables that are fastened to support. Both the upper cables make an angle of 37.0 with respect to the horizontial. calculate the tension in the left and …
  6. physics

    Two cables suspend a 500 N sign above the hallway. The left cable makes a 40 degree angle with the ceiling and the right cable makes a 50 degree angle with the ceiling. What is the tension in the left and right cables?
  7. physics

    A traffic light weighting 145 newtons hangs from a vertical cable tied to two other cables that are fastened to a support. The upper cables make angles of 31.0 degrees and 57.0 degrees with the horizontal. Find the tension in each …
  8. analytic geometry

    The main cables of a suspension bridge uniformly distribute the weight of the bridge when in the form of a parabola. The main cables of a particular bridge are attached to towers that are 600 ft apart. The cables are attached to towers …
  9. Physics

    In a repair shop a truck engine that has mass 429 kg is held in place by four light cables (Figure 1) . Cable A is horizontal, cables B and D are vertical, and cable C makes an angle of 37.1∘ with a vertical wall. Tension in …
  10. physics

    a student weighing 160 pounds hangs for dear life from a cable tied to two other cables fastened to a support as shown above. the upper cables make angles of 39 and 55 with the horizontal. these upper cables are not as strong as the …

More Similar Questions