physics

posted by nick

total normal stresses of 110 and 40 kpa are applied to two planes at right angles in an element of soil. the shear stress acting on those palnes is 20 kpa. what must be the value of the pore pressure in the element if the minor principle stress in the elemnt is to be zero?

Respond to this Question

First Name

Your Answer

Similar Questions

  1. physics

    How much absolute (total) pressure must a submarine withstand at a depth of 120m in the lake. Give answer in kPa. (Use 10m/s^2 for g). h=120m p_water = 1 g/cm^3 = 1000 kg/m^3 p_atmosphere = 101.3kPa P_total = ?
  2. physics

    How much absolute (total) pressure must a submarine withstand at a depth of 120m in the lake. Give answer in kPa. (Use 10m/s^2 for g). h=120m p_water = 1 g/cm^3 = 1000 kg/m^3 p_atmosphere = 101.3kPa P_total = ?
  3. chem

    Nitrogen(75.5 kPa), oxygen (19.2 kPa), carbon dioxide(0.05 kPa) and water vapor(4.3 kPa) are the usual atmospheric components. What is the total atmospheric pressure in kPa?
  4. soil mechanics

    total normal stresses of 110 and 40 kpa are applied to two planes at right angles in an element of soil. the shear stress acting on those palnes is 20 kpa. what must be the value of the pore pressure in the element if the minor principle …
  5. Chemistry

    the vapor pressure of ethanol at its normal boiling point would be 1)80 kPa 2)101.2 kPa 3)273 kPa 4)373 kPa would it be 1 ?
  6. engineering

    A saturated soil sample under CU test was subjected to a confining pressure of 200 kPa with back pressure (pore pressure) of 50 kPa. What would be the value of pore pressure if the confining pressure was raised to 400 kPa without drainage?
  7. soil mechanics

    The following results were obtained from a CU on two samples: Test no. Confining stress (kPa) Deviatoric stress (kPa) Pore pressure (kPa) 1 100 400 -20 2 300 760 60 a) Determine c and ƒÖ for total stress and effective stress condition. …
  8. solid mechanics

    Q.1 The normal stresses at a certain point in a body are 80MPa tension and 50Mpa compression. There are also shear stresses across the plane of tension and compression equal to 30MPa.Calculate the maximum direct stress and maximum …
  9. physics

    1500 cm^3 of ideal gas at STP is cooled to -20°C and put into a 1000 cm^3 container. What is the final gauge pressure?
  10. physics

    1500 cm3 of ideal gas at STP is cooled to -20°C and put into a 1000 cm3 container. What is the final gauge pressure?

More Similar Questions