Chemistry

posted by .

I have a 2.5g sample in 12.5ml solution.I'm supposed to do a spike into this solution with the sample.If my standard concentration is 2000ppm, how much of this solution should I use such that I get 200ppm spike in sample?

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. Chemistry

    A teacher prepares a saturated NaCli solution at 55 Degree C. What is the % by mass 9m/m0 of this solution?
  2. chemistry

    Hey, I am having a real hard time getting the answers to the problems. Any help would be greatly aprreciated! 1. When 11 mL of a solution containing 2.9 M AlBr3 is diluted to 33 mL, a dilute solution is formed. What is the Br- concentration …
  3. chemistry

    Online chemistry lab preparing standards help?
  4. Chemistry

    A sample of solid Ca(OH)2 is stirred in water at 30°C until the solution contains as much dissolved Ca(OH)2 as it can hold. A 100.-mL sample of this solution is withdrawn and titrated with 5.00 X 10^-2 M HBr. It requires 48.8 mL of …
  5. chemistry

    A 150.0-mL sample of Solution A is diluted to a total volume of 423 mL to form Solution B. If the concentration of Solution A was originally 20.0 mg/L, what is the concentration (in mg/L) of Solution B?
  6. Physics

    A worker drives a 0.460 kg spike into a rail tie with a 2.16 kg sledgehammer. The hammer hits the spike with a speed of 64.5 m/s. If one third of the hammer’s kinetic en- ergy is converted to the internal energy of the hammer and …
  7. chemistry

    You need to determine the concentration of a sulfuric acid solution by titration with a standard sodium hydroxide solution. You have a 0.1896 M standard solution. You take a 25.00 mL sample of the original acid solution and dilute …
  8. analytical chemistry

    Any help is greatly appreciated 5mL of a solution A (unknown concentration) was transferred into sic 25mL volumetric flask. The following volumes of a standard solution of A with with a concentration 75ppm were added to the flask: …
  9. analytical chemistry

    DrBob222, it is me again. Continue the question 5mL of a solution A (unknown concentration) was transferred into sic 25mL volumetric flask. The following volumes of a standard solution of A with with a concentration 75ppm were added …
  10. Chemistry

    The spectrophometer was used to measure the absorbance of each of a series of [FeSa]+ solutions. A standard curve was construnceted by plotting the absorbance vs. concentration (M). The slope and y-intercept were found to be 1496 M-1 …

More Similar Questions