geometry

posted by .

if six inscribed, wooden disks are cut from a 36 centimeter by 24 centimeter retangular block of wood, how many square centimeters of wood will not be used?

• geometry -

the highest common factor is 12cm, so that is the diameter. figure the area of the six, and then subtract from total original area.

Similar Questions

1. Science

You are given a wooden block that is 25cm long, 8cm wide and 3cm tall. Also, the block of wood has a mass of 350 grams. What is the density of this block of wood?
2. English

1. Cut long rice cake into 4-5 cm pieces. (How do you read '4-5 cm'?
3. physics

A 3.6 kg wood block is launched up a wooden ramp that is inclined at a 30¡ angle. The block's initial speed is 13 m/s. (Use µk = 0.20 for the coefficient of kinetic friction for wood on wood.) What vertical height does the block …
4. Geometry

Find the area (in square centimeters) of a triangular piece of cloth with a 14-centimeter base and an 18-centimeter height.
5. Geometry

Find the area (in square centimeters) of a triangular piece of cloth with a 14-centimeter base and an 18-centimeter height.
6. Plane and Solid Geometry

A piece of wood whose ends are square was cut from a cylindrical piece of wood which was cut from the same pieces of wood whose ends are squares 10 centimeter by 10 centimeter and length 20 centimeter. Find the volume of wood(smallest …
7. math

Tomas needs to cut a piece of wood for a model airplane he is building. He has four pieces of wood: 5 feet, 4 feet, 6 feet, and 3 feet long. If the length of wood he needs to cut is 11 square root feet long, which piece of wood should …
8. physics

As shown in the diagram, a bullet of mass 7.0 g strikes a block of wood of mass 2.1 kg. The block of wood is suspended by a string of length 2.0 m, forming a pendulum. The bullet lodges in the wood, and together they swing upward a …
9. Math

Thomas needs to cut a piece of wood for a model airplane he is builing. He has four peices of wood: 5 ft, 4 ft, 6 ft, 3 ft long. If the length of wood he needs to cut √11 ft long, which peice of wood should be cut to have the …
10. physics

The coefficient of kinetic friction for wood on wood is o.55. The coefficient of kinetic friction for wood on wood is 0.68. For a 3.5kg wood block being pulled horizontally: a. what is the pull force needed to start the wood block …

More Similar Questions