posted by chase

What effect does bending, stress, or machining have on the tendency of iron to corrode? 

Respond to this Question

First Name

Your Answer

Similar Questions

  1. Chem.....

    Methanol, CH3OH, is produced on an industrial scale from carbon monoxide and hydrogen. At the temperatures used, gaseous methanol is formed according to the following thermochemical equation: CO(g)+ 2H2(g) <---> CH3OH(g) H = …
  2. Transfer Pricing

    The per unit cost details are as followers: Machining Finishing Transferred in cost N/A $27 Variable cost $24 9.00 Allocated fixed costs 3.00 13.50 Full cost per unit 27.00 49.50 An external supplier has offered to supply a product …
  3. Chem

    K so this time it is basic concept and I am suppose to guess what happens, so I've written the cause but I have also written my answer to the reaction and effect. so for: A + B <=> C stress: A is increased reaction: forward effect:[A]increased …
  4. physics

    a bimetallic compound strip of brass and iron is 10cm long at 20C. When heated over a Bunsen burner flame the temperature of the brass rises to 800C and the iron to 750C. Calculate the difference in lengths of the iron and brass. (Ignore …
  5. science

    If iron is placed into electrical contact with a more active metal, the iron will not corrode. true or false
  6. chem help!!

    What effect does bending, stress, or machining have on the tendency of iron to corrode?
  7. Chemistry

    Aluminum is more reactive than iron, yet it is used today for a variety of applications in which iron would corrode (cans, rain gutters,etc). The reason for the corrosion durability of aluminum is 1. all aluminum products are treated …
  8. Materials Science

    A 4-point bending test is performed on the same beam, with symmetric loads of 5kN separated by 2m. Draw the bending moment and shear force diagrams for the beam. Then answer the following questions about the shear force V and bending …
  9. Mechanical engineering

    An I section beam of 4m length with end supports is required to carry a point load of 50 KN at its mid pint. The maximum bending stress is limited to 85 MPa, and Modulus of Elasticity of the steel s 200 GPa. Evaluate maximum bending …
  10. material science

    What is the ratio of the maximum axial stress to the maximum bending stress in the inclined cell walls of hexagon honeycombs in terms of t,h ,l, and theta?

More Similar Questions