Pysics
posted by Cody .
A small motor runs a lift that raises aload of bricks weighing 836N to a height of 10.7m in 23.2s. assuming that the bricks are lifted with constant speed, what is the minimum power the motor must produce?

Power required =
(Potential Energy Gain)/(time)
= 836*10.7/23.2
The answer will be in Watts.
Respond to this Question
Similar Questions

Physics
(a).A 220kg sleigh is pulled by one horse at constant velocity for 0.90 km on a snowy, horizontal surface, the coefficient of kinetic friction between the sleigh runners and snow is 0.27. What power must the horse deliver to the sleigh … 
Physics
A 900W motor is used to lift 275.51kg of bricks a distance of 30, to the roof of the building. a. If the motor ran for 90s how much work did it do? 
physics  really dnt get this at all
A small electric motor is used to lift a 0.50kilogram mass at constant speed. If the mass is lifted a vertical distance of 1.5 meters in 5.0 seconds, the average power developed by the motor is 
physics
A small motor runs a lift that raises a load of bricks weighing 916 to a height of 12.7 in 28.2 . 
physics
what do you mean by conservative forces?An elevator weighing 400 kg is to lifted up at a constant velocity of 3cm s1,what would be the minimum power of the motor to be used? 
physics
A 10kilow walts electric motor is used to raise a 400kg load of bricks to a height of 60meters.The efficiency of the motor 80%.what is the input energy? 
Physics
An electric motor runs at a constant rotational frequency of 3000 r/min and has the load of 75 Nm and a 5,0 Nm extra load of friction and gear. The efficiency of the motor is 78%. a) What is the input power of the motor? 
Physics
Searches related to a motor lifts an elevator of mass m at constant speed. The power output of the motor is P and there are no frictional losses so that all the power output from the motor goes into lifting the elevator mass. What … 
Physics
A motor lifts an elevator of mass m at constant speed. The power output of the motor is P and there are no frictional losses so that all the power output from the motor goes into lifting the elevator mass. What is the correct expression … 
Physics
An elevator weighing 400kg is to be lifted up at a constant velocity of 0.6m/s for this purpose a motor of required horse power is used. (g=9.8m/s).(a)What is the acceleration of motor in case of upward motion?