# physics

posted by .

Three blocks are in contact with each other on a frictionless, horizontal surface, as shown below. A horizontal force is applied to m1. Take m1 = 2.00 kg, m2 = 3.00 kg, m3 = 5.00 kg, and F = 22.0 N
Find the acceleration of the blocks
_______m/s2 (to the right)

(c) Find the resultant force on m1.
_______N (to the right)
Find the resultant force on m2.
_______ N (to the right)
Find the resultant force on m3.
_______ N (to the right)

(d) Find the magnitude of the contact force between m1 and m2.
_______N
Find the magnitude of the contact force between m2 and m3.
_______ N

(e) You are working on a construction project. A coworker is nailing up plasterboard on one side of a light partition, and you are on the opposite side, providing "backing" by leaning against the wall with your back pushing on it. Every blow makes your back sting. The supervisor helps you to put a heavy block of wood between the wall and your back. Using the situation analyzed in parts (b), (c), and (d) as a model, explain how this works to make your job more comfortable.
_______________________________________
___________________________________

• physics -

We will glady critique your work. If you are looking for a place where homework is done for you, this isn't it.

## Similar Questions

1. ### Physics

Three blocks on a frictionless horizontal surface are in contact with each other A force F is applied to block 1 (m1) Draw a free body diagram for each block ok for the diagram is the force F applied horizontal to mass one does this …
2. ### physics

Three blocks are in contact with each other on a frictionless, horizontal surface, as shown below. A horizontal force is applied to m1. Take m1 = 2.00 kg, m2 = 3.00 kg, m3 = 5.00 kg, and F = 22.0 N
3. ### Physics-Mechaincs

A force of 23.52 N pushes and pulls to blocks as shown in the figure below. The vertical contact surfaces between the two blocks are frictionless. The contact between the blocks and the horizontal surface has a coefficient of friction …
4. ### Physics

Three blocks on a frictionless horizontal surface are in contact with each other, as shown below. A force F is applied to block A (mass mA). (a) Draw a free-body diagram for each block. Determine (b) the acceleration of the system …
5. ### Physics

Three blocks rest on a frictionless, horizontal table (see figure below), with m1 = 8 kg and m3 = 20 kg. A horizontal force F = 101 N is applied to block 1, and the acceleration of all three blocks is found to be 3.5 m/s2. Find m2. …
6. ### physics

Three blocks are in contact with each other on a frictionless horizontal surface. A 696 N horizontal force is applied to the block with mass of 4.7 kg as shown in the ﬁgure below. The acceleration of gravity is 9.8 m/s 2 . 4.7 …
7. ### physics

Three blocks are in contact with each other on a frictionless horizontal surface. A 696 N horizontal force is applied to the block with mass of 4.7 kg as shown in the ﬁgure below. The acceleration of gravity is 9.8 m/s 2 . 4.7 …
8. ### physics

Three blocks are in contact with each other on a frictionless horizontal surface. A 696 N horizontal force is applied to the block with mass of 4.7 kg as shown in the ﬁgure below. The acceleration of gravity is 9.8 m/s 2 . 4.7 …
9. ### Physics

Three blocks are in contact with each other on a frictionless horizontal surface. A 417 N horizontal force is applied to the block with mass of 3.7 kg as shown in the ﬁgure below. The acceleration of gravity is 9.8 m/s^2. (the …
10. ### physics

Three blocks on a frictionless horizontal surface are in contact with each other. A force F is applied to block A and the blocks start to slide to the right of their initial position. Determine the acceleration of the system, if m_A …

More Similar Questions