physics

posted by .

One end of a light spring with force constant 300 N/m is attached to a vertical wall. A light string is tied to the other end of the horizontal spring. The string changes from horizontal to vertical as it passes over a solid pulley of diameter 6.00 cm. The pulley is free to turn on a fixed smooth axle. The vertical section of the string supports a 400 g object. The string does not slip at its contact with the pulley.

(b) Find the frequency of oscillation if the mass of the pulley is 450 g.


(c) Find the frequency of oscillation if the mass of the pulley is 750 g.

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. physics

    A uniform string fixed at one end passes over a pulley and then is attached to a hanging object. The string is horizontal between the fixed end and the pulley. When you let the hanging object oscillate in the vertical plane, the fundamental …
  2. physics

    In Figure (a), a block of mass m lies on a horizontal frictionless surface and is attached to one end of a horizontal spring (spring constant k) whose other end is fixed. The block is initially at rest at the position where the spring …
  3. physics

    a simple pendulum consists of a bob of mass 1.8 kg attached to a string of length 2.3 m. the pendulum is held at an angle of 30 from the vertical by a light horizontal string attached to a wall, as shown above. calculate the tension …
  4. Physics

    A weight of 4.33 N is suspended by the string fasten at its upper end. A horizontal force is applied to the weight so that the string makes an angle of 30 degrees with the vertical. Find the horizontal force and the tension in the …
  5. physics

    A uniform rigid pole of length L and mass M is to be supported from a vertical wall in a horizontal position, as shown in the figure. The pole is not attached directly to the wall, so the coefficient of static friction, μs, between …
  6. physics

    A uniform rigid pole of length L and mass M is to be supported from a vertical wall in a horizontal position, as shown in the figure. The pole is not attached directly to the wall, so the coefficient of static friction, μs,between …
  7. physics

    A uniform rigid pole of length L and mass M is to be supported from a vertical wall in a horizontal position, as shown in the figure. The pole is not attached directly to the wall, so the coefficient of static friction, μs,between …
  8. Physics

    A 2.5 m rod of mass M= 4. kg is attached to a pivot .8m from the left end so that it can rotate vertically. At the left end of the rod is a small object with mass m=1.5kg. A spring with a spring constant k=90N/m is attached to the …
  9. Physics

    A uniform rigid pole of length L and mass M is to be supported from a vertical wall in a horizontal position, as shown in the figure. The pole is not attached directly to the wall, so the coefficient of static friction, μs,between …
  10. physics

    A spring (spring 1) with a spring constant of 520N/m is attached to a wall and connected to another weaker spring (spring 2) with a spring constant of 270N/m on a horizontal surface. Then an external force of 70N is applied to the …

More Similar Questions