Physics

posted by .

A uniform horiztonal beam is attached to a veritcal wall by a frictionless hinge and supported from below at an angle theta = 39 degrees by a brace that is attached to a pin. The bean has a weight of 340 N. Three additional forces keep the beam in equilibrium. The brace applies a force P to the right end of the beam that is directed upward an the angle theta with respect tothe horiztonal. The hinge applies a force to the left end of the beam that has a horizontal component H and a vertical component V. Find the magnitudes of these three forces.

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. physics

    A 24 kg beam is attached to a wall with a hinge and its far end is supported by a cable. The angle between the beam and the cable is 90 degrees and the beam is inclined at an angle of 13.6 degrees with respect to the horizontal. What …
  2. physics

    A uniform 8 m 1500 kg beam is hinged to a wall and supported by a thin cable attached 2 m from the free end of the beam as shown in the figure. The beam is supported at an angle of 30 degrees above the horizontal. a) free diagram b) …
  3. physics

    A 1210 N uniform beam is attached to a vertical wall at one end and is supported by a cable at the other end. A W = 1820 N crate hangs from the far end of the beam. The angle between the beam and the horizontal is 30 degrees upwards …
  4. Phsyics(Please respond)

    A uniform horizontal beam is attached to a vertical wall by a frictionless hinge and supported from below at an angle è = 38o by a brace that is attached to a pin. The beam has a weight of 347 N. Three additional forces keep the beam …
  5. Physics(Please help)

    A uniform horizontal beam is attached to a vertical wall by a frictionless hinge and supported from below at an angle è = 38o by a brace that is attached to a pin. The beam has a weight of 347 N. Three additional forces keep the beam …
  6. Physics(Please, please check)

    A uniform horizontal beam is attached to a vertical wall by a frictionless hinge and supported from below at an angle è = 38o by a brace that is attached to a pin. The beam has a weight of 347 N. Three additional forces keep the beam …
  7. physics

    A uniform, horizontal beam is 5.00m long and has a weight of 200N. The beam is hinged at one end to a wall. A 600N weight is attached to the order end of the beam. The beam is supported by cable at the end opposite the wall. The cable …
  8. physics

    A 9.0 m uniform beam is hinged to a vertical wall and held horizontally by a 5.0 m cable attached to the wall 4.0 m above the hinge, as shown below. The metal of the cable has test strength of 1.00 KN (kilo-Newton), which is the maximum …
  9. physics

    The drawing shows a uniform horizontal beam attached to a vertical wall by a frictionless hinge and supported from below at an angle θ = 38o by a brace that is attached to a pin. The beam has a weight of 346 N. Three additional …
  10. physics

    A uniform beam weighing 1300N is attached to a vertical wall so that it is perfectly horizontal. the beam is 8 m long. A support race is anchored to the wall beneath the beam, making contact with the beam 3 m away from the wall at …

More Similar Questions