Chemistry

posted by .

So i had trouble finding the answers to these questions on a lab:

Background: If we were using a burret/flask instead of a pipette and well plates. Before you started, the buret must be rinsed with 1 ml of distilled water and then 1 ml of NaOH solution. The flask would also be rinsed with 1 ml of distilled water and 1 ml of vinegar.

Questions: Based on the background info. above, predict how the calculated molarity of the acid would be affected (too high, too low, or not affected) by the following lab procedures. (then explain your answer)

1.) After rinsing the buret with distilled water, the buret is filled with the standard NaOH solution; the acid is titrated to its equivalence point.

2.) Phenolpthalein changes color around pH of 9 to signal the equivalence point; an indicator that changes color around pH of 5 is used instead.

3.) An air bubble of some size was present in the buret at the end of the experiment (it was pushed in after the lab started.)

thank you!

  • Chemistry -

    See my latest response at the original post.

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. science (chem)

    This pertains to using a pasteur pipette. I have this weird problem when I use a pasteur pipette. I go and draw the liquid into the pipette and as I'm transfering the liquid to another container it sporatically squirts the liquid in …
  2. Chemistry - Titrations

    This is one of those titration labs, maybe you could answer it?
  3. chemistry

    So i had trouble finding the answers to these questions on a lab: Background: If we were using a burret/flask instead of a pipette and well plates. Before you started, the buret must be rinsed with 1 ml of distilled water and then …
  4. AP Chemistry

    So i had trouble finding the answers to these questions on a lab: Background: If we were using a burret/flask instead of a pipette and well plates. Before you started, the buret must be rinsed with 1 ml of distilled water and then …
  5. Chemistry

    Explain how the calculated molarity of the potassium permanganate would be affected by each of the following experimental errors. In each case, you must also state if the calculated molarity is higher or lower than the actual morality. …
  6. Chemistry

    Explain how the calculated molarity of the potassium permanganate would be affected by each of the following experimental errors. In each case, you must also state if the calculated molarity is higher or lower than the actual morality. …
  7. Chemistry

    How would each of the following affect the accuracy of the calculated neutralizing power of antacid (too high, too low, or no effect) a. The titration flask was wet with distilled water when the antacid was added. b. The buret was …
  8. chemistry

    Using the equipment below, explain how to prepare a .00052 HCL solution farom a regent bottle containing .13 HCL using only the equipment below. Note, you may make multiple solutions but you are not allowed to combine columes. for …
  9. chemistry

    Using the equipment below, explain how to prepare a 0.00052M HCl solution from a reagent bottle containing 0.13M HCl using only the equipment listed below. Note, you may make multiple dilutions, but you are not allowed to combine volumes. …
  10. CHM

    rank the following items in order of accuracy when they are used for their intended purpose: volumetric pipet, beaker,erlenmeyer flask,mohr pipet,graduated cylinder,volumetric flask,buret my answer MOHR PIPETTE 1 VOLUMETRIC PIPETTE …

More Similar Questions