Physics

posted by .

how much torque does it take to turn a rotor that is 12" diameter and weights around 200lbs that seats on bearings. a 2" diameter shaft that through the center of the rotor that is on center. don

  • Physics -

    this question makes no sense to me. What in the world does turn a rotor mean? That is not a physics term.

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. physics

    A centrifuge rotor rotating at 7,000 rpm is shut off and is eventually brought uniformly to rest by a frictional torque of 1.30 m·N. If the mass of the rotor is 4.80 kg and it can be approximated as a solid cylinder of radius 0.0710 …
  2. Electricity

    A 3-phase 50Hz, 8 pole induction motor has an effective stator to rotor turns ratio of 4:2, rotor resistance 0.2ohms and rotor standstill reactance 0.3ohms. Calculate the starting torque and maximum torque. At full load the slip is …
  3. phy

    A centrifuge rotor rotating at 13,000 rpm is shut off and is eventually brought uniformly to rest by a frictional torque of 1.30 m·N. If the mass of the rotor is 4.80 kg and it can be approximated as a solid cylinder of radius 0.0710 …
  4. Physics

    The diameters of the main rotor and tail rotor of a single-engine helicopter are 7.59 m and 0.98 m, respectively. The respective rotational speeds are 456 rev/min and 4143 rev/min. Calculate the speeds of the tips of both rotors. main …
  5. Physics

    A centrifuge rotor rotating at 10700 rpm is shut off and is eventually brought uniformly to rest by a frictional torque of 2.48 m * N. 1. If the mass of the rotor is 5.61 kg and it can be approximated as a solid cylinder of radius …
  6. physics

    THe steering wheel of a car has a diameter of 60cm and turns a shaft 4cm in diameter (a) If a 90nt force is needed to turn the wheel, what torque is exerted on the wheel?
  7. Physics

    The diameters of the main rotor and tail rotor of a single-engine helicopter are 7.70 m and 0.99 m, respectively. The respective rotational speeds are 454 rev/min and 4,147 rev/min. Calculate the speeds of the tips of both rotors. …
  8. Physics

    A centrifuge rotor rotating at 11500 is shut off and is eventually brought uniformly to rest by a frictional torque of 1.52 . a.If the mass of the rotor is 6.07 and it can be approximated as a solid cylinder of radius 0.0750 , through …
  9. Physics

    The ultracentrifuge is an important tool for separating and analyzing proteins in biological research. Because of the enormous centripetal accelerations that can be achieved, the apparatus must be carefully balanced so that each sample …
  10. AP Physics

    A centrifuge rotor rotating at 12000 rpm is shut off and is eventually brought to rest by a frictional torque of 1.50 m·N. If the mass of the rotor is 4.80 kg and it can be approximated as a solid cylinder of radius 0.0710 m, through …

More Similar Questions