engineering materials

posted by .

can someone help me to find some good source about the topic: stress, strain, young's modulus of elasticity and shearing stress? pls. help me. thanks

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. physics

    Find the strain and stress on a 1.5 inch diameter cylinder which is subjected to a load of 7.8 tons and measures 11.92 inches instead of the original 12 inch length. What is the Modulus of Elasticity for the material?
  2. Physics/Engineering

    1. The problem statement, all variables and given/known data I am using a Vishay strain indicator with it hooked up to a strain gage hooked up 1" away from the wall on the solid beam. The beam is .5" by .5", and it is solid. The beam …
  3. Chemistry

    Answer the following questions by referencing the six stress-strain curves below. (a) Which of the stress-strain curves are for materials that are purely elastic?
  4. mechanics of materials

    an aluminium alloy bar with a Young's modulus of 70GPa is under a tensile stress of 10MPa, Which of thefollowing is the equal to the strain in the bar?
  5. mechanics of materials

    An aluminium alloy bar with a Young's modulus of 70GPa is under a tensile stress of 10MPa, Which of thefollowing is the equal to the strain in the bar?
  6. mechanics of materials

    An aluminium alloy bar with a Young's modulus of 70GPa is under a tensile stress of 10MPa, Which of thefollowing is the equal to the strain in the bar?
  7. Materials Science

    Aluminum is a cubic crystal, with S11=1.59×10−11 m2/N S12=−0.58×10−11 m2/N S44=3.52×10−11 m2/N What are the Young's modulus, Poisson's ratio and shear modulus, corresponding to these values?
  8. Physics

    a wire 100 cm long and 0.2 cm in diameter is suspended from a support. a 10 kg mass is hung from the lower end of the wire. a find the stress b find the strain c young's modulus of elasticity
  9. Supportive Learning Environment

    Which of the following statements is true about stress in young children?
  10. physic - stress and strain

    Sample 1, Original Length 250 mm and 10 mm Diameter, Length after testing 250.23 mm the force used for the test was 15KN Calculate the Stress and Strain for each of the Samples and from this and, assuming the material has remained …

More Similar Questions