physics

posted by .

a lever is 5 m long. The distance from the fulcrum to the weight to be lifted is 1 m. If a 3000 N rock is to be lifted, how much force must be excerted on the lever?

  • physics -

    F1*d1=F2*d2

    F1=3000 d1 is 1m
    F2=? d2 is 4m

    solve for F2

  • physics -

    750N

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. Physics

    A lever is 5m long. The distance from fulcrum to the weight to be lifted is 1m. If the worker pushes on the opposite end with 400N, what is the max weight that can be lifted?
  2. Physics

    1-A car is lifted a certain distance in a service station and therefore has potential energy with respect to the floor. If it were lifted twice as high, how much potential energy would it have?
  3. physics

    3. A man lifts various loads with the same lever. The distance of the applied force from the fulcrum is 1.00 m, and the distance from the fulcrum to the load is 0.250 m. What is the mechanical advantage of the lever?
  4. physics

    A man lifts various loads with the same lever. The distance of the applied force from the fulcrum is 1.00 m, and the distance from the fulcrum to the load is 0.250 m. What is the mechanical advantage of the lever?
  5. science

    A man lifts various loads with the same lever. The distance of the applied force from the fulcrum is 1.00 m, and the distance from the fulcrum to the load is 0.250 m. What is the mechanical advantage of the lever?
  6. physics

    A boy exerts a force of 210 N on a lever to raise a 1.25 103 N rock a distance of 12 cm. If the efficiency of the lever is 88.7%, how far did the boy move his end of the lever?
  7. Physics

    A force of 60 N is exerted on one end of a 1.0-m-long lever. The other end of the lever is attached to a rotating rod that is perpendicular to the lever. By pushing down on the end of the lever, you can rotate the rod. If the force …
  8. physics

    A man lifts various loads with the same lever. The distance of the applied force from the fulcrum is 2.00 m and the distance from the fulcrum to the load is 0.500 m. A graph of resistance force vs. effort force is shown. What is the …
  9. physics

    Find the force (in newton) required to lift a mass of 26 kg load with a wheelbarrow (2nd class lever) with the load at 0.75 m from the fulcrum and being lifted at 1.7 m from the fulcrum, assuming ideal conditions.
  10. physical science

    An input force of 20 newtons is applied to a lever at a distance of 2 meters from the fulcrum. An object 0.5 m away from the fulcrum (and on the other side) is lifted by the 20-N force. What is the output force?

More Similar Questions