# physics

posted by .

1.)Water flows from a 2 cm diameter pipe, at a speed of 0.35m/sec. How long will it take to fill a 10 liter container?

2.)A horizontal segment of pipe tapers from a cross-sectional area of 50 cm^2 to 0.5 cm^2. The pressure at the larger end of the pipe is 1.2x 10^5 Pa and the speed is 0.04m/sec. What is the pressure at the narrow end of the segment?

• physics -

duplicate post

## Similar Questions

1. ### Physics

A horizontal segment of pipe tapers from a cross sectional area of 50 cm2 to 0.5 cm2. The pressure at the larger end of the pipe is 1.34 105 Pa and the speed is 0.038 m/s. What is the pressure at the narrow end of the segment?
2. ### physics

1.) Water flows from a 2 cm diameter pipe, at a speed of 0.35m/sec. How long will it take to fill a 10 liter container?
3. ### physics

1.) Water flows from a 2 cm diameter pipe, at a speed of 0.35m/sec. How long will it take to fill a 10 liter container?
4. ### physics

1.)Water flows from a 2 cm diameter pipe, at a speed of 0.35m/sec. How long will it take to fill a 10 liter container?
5. ### physics

Water flows steadily from an open tank into a pipe. The elevation of the top of the tank is 10.2 m, and the elevation at the pipe is 3.90 m. The initial cross-sectional area of the pipe is 6.40×10^−2 m; and at where the water …
6. ### phys

Water flows steadily from an open tank into a pipe as shown in the figure. The elevation of the top of the tank is 12.3 m, and the elevation at the pipe is 3.80 m. The initial cross-sectional area of the pipe (at point 2) is 5.60×10−2 …
7. ### physics

A horizontal segment of pipe tapers from a cross sectional area of 50 cm2 to 0.5 cm2. The pressure at the larger end of the pipe is 1.26 105 Pa and the speed is 0.029 m/s. What is the pressure at the narrow end of the segment?
8. ### Physics

A horizontal segment of pipe tapers from a cross sectional area of 50.0 cm^ 2 to 0.500 cm^2. The pressure at the larger end of the pipe is 1.20x 10^5 Pa, and the speed is 0.040 m/s. what is the pressure at the narrow end of the segment?
9. ### physics, buoyance

Water flows at a rate of 25L/min through a horizontal 8.0-cm-diameter pipe under a pressure of 5.7Pa . At one point, calcium deposits reduce the cross-sectional area of the pipe to 40cm2 . Part A What is the pressure at this point?
10. ### math

Water flows through a pipe with the inner diameter of 20cm at a speed of 1m/s. How long does it take for the water flowing out from the pipe to fill a cylindrical tank with the base radius of 0.8m and the height of 0.5m?

More Similar Questions