# Science

posted by .

Infer why the output force exerted by a rake must be less than the input force?

## Similar Questions

1. ### physical science!!!!!!!!

1. Alex pulls on the handle of a claw hammer with a force of 15 N. If the hammer has a mechanical advantage of 5.2, how much force is exerted on a nail in the claw?
2. ### science

A machine has a mechanical advantage of 2. This means its output force is _____. a. 0.5 times greater than the input force b. 2 times smaller than the input force c. 2 times greater than the input force d. 2 times more efficient than …
3. ### Physical Science

In a pulley sytem with 100% effieciency with ten support cables. The input side reels 100 meters of cable. How far dis the output move?
4. ### physics

A hydraulic press has an input cylinder 1 m in diameter and an output cylinder 2 meters in diameter. Assuming 100% efficiency, find the force exerted by the output piston when a force of 10 Newtons is applied to the input piston. pounds …
5. ### Science

What is the mechanical advantage of the pulley system?
6. ### physical science

An input force of 20 newtons is applied to a lever at a distance of 2 meters from the fulcrum. An object 0.5 m away from the fulcrum (and on the other side) is lifted by the 20-N force. What is the output force?
7. ### physics

An hydraulic press has an input cylinder of 2cm diameter and an output cylinder of 6cm diameter. Find the force exerted by the output piston when a force of 20N is applied to the input piston.
8. ### Physics

A hydraulic press has an input cylinder 4.0cm in diameter and an output cylinder 16cm in diameter. (a) Assuming 100 percent efﬁciency, ﬁnd the force exerted by the output piston when a force of 170N is applied to the …
9. ### Computer Science

What is the rule for this function? input 1 output 2 input 2 output 5 Input 3 output 12 Input 4 output 34 Input 5 output 135 Input 6 output 741
10. ### SCIENCE

Barry used a ramp to transport a load to a truck. The ramp made work easier by : 1) reducing the size of the input force 2) reducing the input force to zero 3)changing the distance over, which the input force was exerted 4) reducing …

More Similar Questions