Internetworking Design

posted by .

OSPF lab.
Using a simulator I need to create a four router topology. Using any interfaces of my choice. I am given /24 networks – choose interface addresses from the given network ID.
Configure all routers in OSPF area 0 and make sure you can ping from end-to-end.



Use the following network IDs.
Between R1 and R2 =10.10.10.0/24
Between R2 and R3= 20.20.20.0/24
Between R3 and R4 = 30.30.30.0/24.

I am to show R1's and R4's routing table. How do I do this?

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. IT205

    Write a 1050-1750 word paper in APA format outlining the development of a high-level computer network design for the Bead Bar. Your paper should include the network topology that you think should be used, the network architecture, …
  2. IT 205

    outline the development of a high-level computer network design for the Bead Bar include the network topology that you think should be used, the network architecture, and the advantages and drawbacks that the recommended network would …
  3. network

    You have worked as a network engineer for a few years, but your job at Con-nectSpree is the first opportunity you've had to work for an ISP. You'll be working on the part of ConnectSpree's network that provides customer con-nections …
  4. IT 242

    Design a WAN Develop a plan to set up a wide area network based on the scenario presented in Appendix A. Your plan must include the following: o An overview of the company and its needs o A logical network drawing for Acme to depict …
  5. Network

    Suppose ABC Company have an office in Lahore. It has currently 50 computers. Now, Management is going to buy a new building in front of old building. They want to extend their network between these two buildings with 50 new computers. …
  6. Networking

    I need to design a fully switched network for a 3-story retail building. Management on second floor (36 workstations), Sales on the 1st floor (20 workstations) and warehouse in the basement (35 workstations). My SOW and Network diagrams …
  7. IP address assignment

    Imagine that you are a system administrator for a company, and that the company operates from two locations Phoenix and Boston. Phoenix has 350 hosts and Boston has 2100. Given that the following class C IP addresses have been assigned …
  8. network topology

    what type of home network topology do you utilize?
  9. computer

    You suspect that the failure of a router or of a transmission line connecting routers has left some of your important servers unavailable to clients at your site. How could you narrow down the location of the problem using what you …
  10. Health care tech

    Which of the following are required by networks?

More Similar Questions