Post a New Question

Physics - Can you plz help!

posted by .

a) a flashlamp bulb is marked '2.5V,0.30A' and has to be operated from a dry battery of e.m.f 3.0V for the current p.d. of 2.5V to be produced across it. Why?

b) ow much heat and light energy is produced by a 100W electric lamp in 5 minutes?

c) what is the resistance of a 240V,60W bulb? - In this case I got 960 ohm (am I correct?)

Yes, on c.

I will be happy to critique your work on a, b.

Please stop posting under multiple names. My patience is running thin

  • Physics - Can you plz help! -

    The bulb is rated 10w~220v it means that it can convert 10j of energy into heat and light

Respond to this Question

First Name
School Subject
Your Answer

Similar Questions

  1. Physics - Help!

    All, Please just help me in this, I will need you to please give me the clue-thanks. a flashlamp bulb is marked '2.5V,0.30A' and has to be operated from a dry battery of e.m.f 3.0V for the current p.d. of 2.5V to be produced across …
  2. Physics

    A battery charger is connected to a dead battery and delivers a current of 4.5 A for 6.0 hours, keeping the voltage across the battery terminals at 12 V in the process. How much energy is delivered to the battery?
  3. Physics

    1)A 15.0 resistor and a 20.0 resistor are connector in parallel. A 5.00 resistor is connected in series with this parallel arrangement. The resistors are connected across a 1.00(I think something else is suppose to be after that but …
  4. Physics

    1)A 2.0-V battery is connected in a circuit with an ammeter and an unknown resistor, P. The current is observed to be 0.70 A. What would be the current in the circuit if a 12-V battery replaces the 2.0-V battery?
  5. Physics

    Six light bulbs are connected in parallel to a 9.0 V battery. Each bulb has a resistance of 3.0 ohms. What is the current in each bulb?
  6. physics

    You are in the lab with a 10 V battery. You have a 10 W light bulb and you want to put 1/2 A of current through the light bulb and 5 V across the light bulb. This will allow the light bulb to have a brightness proportional to 2.5 W. …
  7. college physics

    You are in the lab with a 10 V battery. You have a 10 W light bulb and you want to put 0.75 A of current through the light bulb and 7.5 V across the light bulb. This will allow the light bulb to have a brightness proportional to 5.625 …
  8. Physics

    If a bulb of 5ohms is connected across a 12V battery, what is the current flow through the bulb?
  9. Physics

    A 600W flashlamp fitted to a camera is operated by discharging a 10 000 uF capacitor through the lamp. The capacitor is charged initially from a 6V battery. Calculate A) the energy stores in the capacitor when fully charged B) the …
  10. Physics

    I need to understand how to calculate the final 2 steps of this problem. Appreciate any help: For a circuit, consisting of a single battery and two light bulbs in parallel, what is the total resistance of the circuit if each light …

More Similar Questions

Post a New Question