posted by .

If a wheel turns with a costant rotational speed then: each point on its rim moves with constant roational velocity, each point on its rim moves with constant translational acceleration, the wheel turns with constant translation acceleration, the wheel turns through equal angles in equal times, the angle through which the wheel turns in each second increases as time goes on, the angle through which the wheel turns in each second decreases as time goes on.

I thought if the wheel turns with a constant translational velocity along the rim because of the the equation v=wr. Am I right to think since along the rim will have the same radius as in a wheel.

see below.

## Similar Questions

1. ### Physics

A Ferris wheel with radius 14.0 m is turning about a horizontal axis through its center, as shown in the figure below. The linear speed of a passenger on the rim is constant and equal to 6.60 m/s. What is the magnitude of the passenger's …
2. ### physics

If a wheel turns with a costant rotational speed then: each point on its rim moves with constant roational velocity, each point on its rim moves with constant translational acceleration, the wheel turns with constant translation acceleration, …
3. ### Physics... rotation

A constant force of 40 N is applied tangentially to the rim of a wheel with 20 cm radius. The wheel has a moment of inertia of 30 kg m2. Show that the angular acceleration of the wheel is 0.27 rad s-2
4. ### Physics

A piece of putty is initially located at point A on the rim of a grinding wheel rotating about a horizontal axis. The putty is dislodged from point A when the diameter through A is horizontal. The putty then rises vertically and returns …
5. ### physics

A constant force of 20N is applied tangentially to a string wound on the rim of a 40 cm diameter wheel, initially at rest. (i) How much work does this force do as it turns the wheel through 45„a?
6. ### Physics

A point on the rim of a 0.75 m diameter grinding wheel changes speed at a constant rate from 15 m/s to 21 m/s in 6.2 s. What is the average angular acceleration of the wheel in rad/s^2?
7. ### Physics

A particular Ferris wheel (a rigid wheel rotating in a vertical plane about a horizontal axis) at a local carnival has a radius of 20.0 m and it completes 1 revolution in 9.84 seconds. (a) What is the speed (m/s) of a point on the …
8. ### PHysics

A thin, light wire is wrapped around the rim of a wheel, as shown in the following figure. The wheel rotates without friction about a stationary horizontal axis that passes through the center of the wheel. The wheel is a uniform disk …
9. ### physics

A car is up on a hydraulic at a garage. The wheels are free to rotate, and the drive wheels are rotating with a constant angular velocity. Does a point on the rim of the wheel have (A) a tangential velocity, (B) a tangential acceleration …
10. ### physics

A wheel is spinning with constant angular velocity the ratio of speed of a point on the end of rim to the speed of point halfway between the centre and the end point of rim is:........?

More Similar Questions