Monday
April 27, 2015

Search: zn(s) 2 hcl(aq) h2(g) zncl2(aq) when 50.0 g of zn reacts completely

Number of results: 7,894

AP Chemistry
what is the number of moles of HCl in 50mL of 1.0M HCl
December 1, 2010 by Sam

science
50 mL 3.0 M HCl(aq) that means hw much HCl . Can anybody ilaborate it
March 8, 2011 by Tumpa

Science
How do you calculate the preparation of 0.1M HCl using 33% HCl?
March 20, 2014 by Raksha

chemistry(check my work)
If 6.01 g of K2SO3 dissolved in 930 mL of water reacts stoichiometrically according to the balanced equation in a reaction solution with a total volume of 990 mL, what is the molarity (M) of KCl produced? K2SO3(aq) + 2 HCl(aq) → SO2(g) + 2KCl(aq) + H2O(l) 6.01gx ...
April 3, 2010 by eng

Chemistry
A mixture of nitrogen gas and hydrogen gas reacts in a closed container to form ammonia gas. The reaction ceases before either reactant is completely consumed. At this stage the container has 3.0 mol each of all three gases; nitrogen, hydrogen and ammonia. How many moles of ...
June 30, 2013 by megs

chemistry
given 2CH3OH+3O2->2CO2+4H2O 1. Calculate number of grams of CH3OH required to react with 34.0L of O2 at STP. 2. How many liters of CO2 at 18 degrees Celcius and 6.94 atm are produced when 3.40 mol of CH3Oh is burned completely. 3. What volume of CO2 is produced if 7.11L of ...
November 13, 2012 by sheila

Chemistry
Zn+ 2HCl -> ZnCL2+h2 what volume of hydrogen at stp is produced when 2.5 of zinc react with an excess of hydrochloric acid
October 1, 2007 by Tyneice

chemistry
Zn is less active than Mg. Write the equations describing what occurs when ou mix: a)Zn with 0.5M magnesium chloride, MgCl2 b)Mg with 0.5M ZnCl2
October 28, 2010 by shannon

Organic Chemistry
how many grams of ZnCl2 are needed to prepare 250 ml of an aqueous solution with an osmolarity equal to 0.300?
March 6, 2012 by Jules

Chemistry
out of these conditions, which would result in fastest reaction? a. 2.0M HCL, powedered CaCO3 chip, 50 degrees celsius b. 6.0M HCL, CaCO3 chip, 25 degrees celsius c. 6.0M HCL, powdered CaCO3, 50 degrees celsius. d. 2.0M HCL, CaCO3 chip, 50 degrees celsius. Im guessing C ...
September 25, 2012 by Shreya

Science
zinc is mixed with Hydrochloric acid to form zinc chloride and hydrogen gas. if 7.3 grams of zinc completely reacts how much hydrogen gas will be created? if you collect the hydrogen over water at 23 degrees celcius and a barometric pressure of 770 mmHg and you recover 2.30 ...
April 16, 2014 by Tylor

Chemistry Balancing Equations
I really need help with balancing these equations: PLEASE HELP!! 1. Sodium Hydrogen Sulfite reacts with hydrochloric acid to produce sulfur dioxide gas, water and sodium chloride 2. Sodium nitrate reacts with hydrochloric acid to produce nitrogen monoxide gas, water sodium ...
March 14, 2011 by Anonymous

Chemistry
We conducted a lab with antacids in class the other day and i'm having trouble doing the calculations. Well we basically took antacid tablets dissolved them in HCl, heated it and then added phenolthalien and then titrated until we saw a pink color. At 41mL we saw the pink and ...
March 15, 2010 by Anonymous

chemistry
A chemist needs a HCl solution with a molarity of less than 0.400 M for an experiment. To find out if a sample of HCl solution can be used in the lab, the chemist performs a titration to neutralize 59.2 mL of the HCl with 45 mL of 0.400 M NaOH. Based on the results, will the ...
January 31, 2014 by Matthew

chemistry
Im stuck on these few questions that seems to be getting me no where : -Determine the number of mmoles of HCl that did not react with the anatacid. c HCl = 0.1812 c NaOH = 0.1511 volume of HCl added : 75 volume of NaOH added: 29.23,19.58,33.3 - mmoles of HCl neutralized by the...
October 8, 2013 by karen

chemistry
Im stuck on these few questions that seems to be getting me no where : c HCl = 0.1812 c NaOH = 0.1511 volume of HCl added : 75 volume of NaOH added: 29.23,19.58,33.3 -Determine the number of mmoles of HCl that did not react with the anatacid. - mmoles of HCl neutralized by the...
October 8, 2013 by kathy

Chemistry
A 23.596 g sample of aqueous waste leaving a fertilizer manufacturer contains ammonia. The sample is diluted with 79.504 g of water. A 13.803 g aliquot of this solution is then titrated with 0.1098 M HCl. It required 29.02 ml of the HCl solution to reac the methyl red endpoint...
November 14, 2011 by Mike

chemistry
A 23.596 g sample of aqueous waste leaving a fertilizer manufacturer contains ammonia. The sample is diluted with 79.504 g of water. A 13.803 g aliquot of this solution is then titrated with 0.1098 M HCl. It required 29.02 ml of the HCl solution to reac the methyl red endpoint...
November 14, 2011 by Mike

Chemistry
By titration it is found that 76.3Ml of 0.178M of NaOH(aq) is needed to neutralize 25.00mL of HCL(aq). Calculate the concentration of the HCl solution.
April 17, 2013 by Katherine

chem
how many mL of .135M Sr(OH)2 are needed to neutralize 35ml of .157M HCL I know the answer came out to 20.4 ml My only question is how do I convert HCL to Sr(OH)2
September 29, 2013 by Alexandra

Chemistry Check
The Synthesis of hydrogen chloride is written H2+Cl2==>2HCl. 3L of hydrogen are used and all gasses are at STP. The volume of HCL produced in the reaction would be _______ L. would the answer be 5.96? Three liters of H2 yields six liters of HCl, from the balanced equation. ...
January 19, 2007 by Briana

chem
Describe in detail by words how to prepare 200ml of .150M HCl from a 1.00 M HCl stock solution? Need help with this please? i used C1V1=C2V2 and got volume 2 = 33L or 0.33mL. to prepare the solution i need to weigh 1 gram of HCL (from 1.00M HCl stock solution)lets say i put it...
November 27, 2012 by vince11

Chemistry
Na2CO3 reacts with H2SO4 to give respective salt water and carbon dioxide. Calculate the mass of pure salt formed when 300 g of Na2CO3 of 80% purity reacts with H2SO4
March 24, 2013 by Aurab

Chemistry
Sorry DrBob22, I wasn't sure if you saw my last post. But, I am still a little confused. Here's the info: Antacid Brand: Life Concentration of HCl: 0.1845 M Concentration of NaOH: 0.1482 M Trial 1: 1.Mass of Table: 1.2173g 2.Volume of HCl added: 75.0 mL 3.Milliomoles of HCl ...
October 18, 2010 by Akhed-To DrBob222

chem
Which of the following pairs of substances, when mixed in any proportion you wish, can be used to prepare a buffer solution? (Select all that apply.) NaCN and HCN NaCN and NaOH HCN and NaOH HCl and NaCN HCl and NaOH and Which of the following gives a buffer solution when equal...
April 12, 2011 by Rebekah

Chemistry
The problem asked to find the amount (in moles) of reactant left. .223moles FeS and .652moles of HCl FeS+2HCl--> FeCl2+H2S .223molFeS(1moleFeCl2/1moleFeS)=.223moleFeCl2 .652molHCl(1moleFeCl2/2molHCl)=.326moleFeCl2 .223/.326x100=68.4% used HCL 100-68.4=31.6% remaining 31.6%x...
February 25, 2014 by G.C.

Chemistry
The problem asked to find the amount (in moles) of reactant left. .223moles FeS and .652moles of HCl FeS+2HCl--> FeCl2+H2S .223molFeS(1moleFeCl2/1moleFeS)=.223moleFeCl2 .652molHCl(1moleFeCl2/2molHCl)=.326moleFeCl2 .223/.326x100=68.4% used HCL 100-68.4=31.6% remaining 31.6%x...
February 25, 2014 by G.C.

Chemistry
The problem asked to find the amount (in moles) of reactant left. .223moles FeS and .652moles of HCl FeS+2HCl--> FeCl2+H2S .223molFeS(1moleFeCl2/1moleFeS)=.223moleFeCl2 .652molHCl(1moleFeCl2/2molHCl)=.326moleFeCl2 .223/.326x100=68.4% used HCL 100-68.4=31.6% remaining 31.6%x...
February 25, 2014 by G.C.

chemistry
Copper reacts with sulfuric acid according to the following equation: 2H3SO4 + Cu-> CuSO4 + 2H2O + SO2 How many grams of sulfur dioxide are created by this reaction if 14.2 g of copper reacts with 18 g of sulfuric acid?
January 20, 2011 by Maria

chemistry
Copper reacts with sulfuric acid according to the following equation: 2H3SO4 + Cu-> CuSO4 + 2H2O + SO2 How many grams of sulfur dioxide are created by this reaction if 14.2 g of copper reacts with 18 g of sulfuric acid?
January 20, 2011 by Maria

chemistry
Copper reacts with sulfuric acid according to the following equation: 2H3SO4 + Cu-> CuSO4 + 2H2O + SO2 How many grams of sulfur dioxide are created by this reaction if 14.2 g of copper reacts with 18 g of sulfuric acid?
January 20, 2011 by Jazmin

chemistry
472 mL of H2 gas was collected over water when 1.256 g of Zn reacted with excess HCl. The atmospheric pressure during the experiment was 754 mm Hg and the temperature was 26 degrees C. A. Write the balanced chemical equation (I have this) Zn + HCl ---> ZnCl2 + H2 B. What is...
November 19, 2012 by Jeremiah

Chemistry
A sample of magnesium metal reacts with hydrochloric acid solution to produce magnsesium chloride solution and hydrogen gas. a)write a balanced chemical equation for this reaction and include phase designations. The phase designations would be s for solid, aq for aqueous, and ...
October 7, 2010 by Anonymous

Chemistry
A sample of magnesium metal reacts with hydrochloric acid solution to produce magnsesium chloride solution and hydrogen gas. a)write a balanced chemical equation for this reaction and include phase designations. The phase designations would be s for solid, aq for aqueous, and ...
October 7, 2010 by Anonymous

Chemistry
Equal volumes of 0.240 M AgNO3 and 0.140 M ZnCl2 solution are mixed. Calculate the quilibrium concentrations of Ag+, and Zn2+.
April 8, 2011 by jina

chemistry
Earl N. Meyer found that it took 26.54 mL of a 0.0100 M KOH solution to reach the equivalence point for the titration of 25.00 mL of HCL. What is the molarity of the HCL?
June 21, 2010 by Alisha

Chemistry :(
Calculate the molality, % percent composition by weight, and the mole fraction of HCl in an aqueous 12M HCl solution that has a density of 1.20 g?mL Please help :(
January 22, 2013 by Jillian

Chem 121
Use Hess's law and the reactions 1) CH 4(g)+ Cl 2 (g)--->CH 3 CL(g) + HCl (g) 2) CH 3 Cl (g) + Cl 2 (g)---> CH 2 Cl 2 (g) + HCl (g) to determine the enthalpy for the reaction CH4 (g) + 2CH 2 (g)---> CH2 Cl 2 (g) + 2HCl (g)?
March 29, 2011 by Jessica Jones

chemistry
When performing a titration, 23.65 mL of 1.25 M calcium carbonste was used to neutralize 9.68 mL of HCl. What is the concentration of the HCl solution? (Create a balanced equation first)
June 3, 2011 by lexi

chemistry
Aluminum metal generates H2 gas when dropped into 6.00 M HCl. Calculate the mass of H2 that will form from the complete reaction of 0.365 g Al with 8.40 mL of 6.00 M HCl.
January 26, 2012 by annie

AP Chemistry
In the titration of 77.5 mL of 1.0 M methylamine, CH3NH2 (Kb = 4.4 10-4), with 0.38 M HCl, calculate the pH under the following conditions. (a) after 50.0 mL of 0.38 M HCl has been added (b) at the stoichiometric point
February 7, 2012 by Bill

chemistry
Earl N. Meyer found that it took 26.54 mL of a 0.0100 M KOH solution to reach the equivalence point for the titration of 25.00 mL of HCl. What is the molarity of the HCl?
March 22, 2012 by roger

chem SCC 151
10.0 mL of HCl and a few drops of phenolphthalein indicator. The buret contains 0.110 M NaOH. What was the initial concentration of HCl?
July 15, 2012 by Anonymous

Chemistry
A 0.2299 N acid is prepared by mixing 100 ml of 0.1234 N H2SO4 and 0.3200 N HCl. How much HCl is needed in the preparation of the solution?
January 19, 2014 by Summer

Chemistry (heat flow, simple)
Well I know to calculate heat flow you use, q=ms delta t. for this experiment we mixed naoh with hcl into water. the total mass (volume) of the mixture was 100g the temperature change for naoh was 11.7 degrees C and for hcl it was 11.8 degrees C now im looking to calculate ...
March 12, 2010 by Abdullah

Chemistry
Xe(g) + F2(g) ----uv light---> Xe F2(s) XeF2(g) + 2F2(g) ---catalyst---> XeF6(s) XeF6(s) + H2O(l) ------> Xe O3(s) + 6HF(g) Looking at these three reactions respond the following: a) For each 0.0250 grams of xenon hexaflouride that reacts, what mass of water is ...
January 22, 2012 by Alexandra

Chemistry
Ammonia reacts with oxygen at 120 C to form NO and H20 in a sealed 40-L container. When 34 g of ammonia reacts with 96 g of oxygen, what is the partial pressure of the NO? What is the total pressure?
May 20, 2012 by Erin

Chemistry
A mixture of nitrogen gas and hydrogen gas reacts in a closed container to form ammonia gas. The reaction ceases before either reactant is completely consumed. At this stage the container has 3.0 mol each of all three gases; nitrogen, hydrogen and ammonia. How many moles of ...
June 29, 2013 by Blair

chemistry
Phosphorus pentachloride, PCl5, reacts with water to form phosphoric acid, H3PO4, and hydrochloric acid, HCl. PCl5(s) + 4H2O() → H3PO4(aq) + 5HCl(aq) (a) What mass of PCl5 is needed to react with an excess quantity of H2O to produce 23.5 g of H3PO4? (b) How many ...
November 11, 2013 by Nadz

Chemistry
How many mole of H2 will be produced if 0.500 grams of magnesium is reacted with 10.00mL of 2.0 M HCl? I've concluded the answer is 0.02 moles of H2, but I'm doubting myself a lot because I don't understand the aspects of the balanced chemical equation and how that affects the...
October 22, 2011 by Martin

Chem
HCl -> H+ + Cl- In this scenario would the HCl be a strong acid and the Cl- the base? And do you only use the word conjugate bases when dealing with weak acids? Thanks.
March 2, 2011 by Lena

chemistry
Consider the titration of 88.0 mL of 0.150 M Ba(OH)2 by 0.600 M HCl. Calculate the pH of the resulting solution after the following volumes of HCl have been added. 0.0 ml 12 ml 31 ml 44 ml 88 ml
March 28, 2011 by Sarah

chemistry
Explain how you would prepare the following dilute solutions from the more concentrated ones: a. 200ml of .500M HCL from a 6.00M HCL solution.
April 4, 2011 by cameron

Chemistry
In the reaction, K2Cr2O7 +14 HCl ----> 2KCl + 2CrCl3 + 3Cl2 + 7H2O how many moles of HCl act as reducing agent in balanced chemical equation?
April 15, 2013 by Clandestine

science
5.0g of magnesium metal reacted with 1000cm3 of 4.5M HCl solution to produce hydrogen gas. Calculate the amount of HCl left after the reaction
June 29, 2013 by samuel

chemistry
titration of 50ml of 0.25ammonia with 0.5M HCL . a) find the initial PH value b) volume of HCL is required to reach the equivalent poinnt c)the ph at the equivalence point
November 29, 2014 by anne

Chemistry
a 40.0 ml sample of ca(oh)2 was titrated with 0.0704 m hcl. the volume of hcl needed to reach equivalence point was 18.2 ml. what was the concentration of ca2+ present in the original solution?4
April 22, 2015 by Dahnrae

Chemistry
A 0.250g smaple of magnesium-aluminum alloy dissolves completely in an excess of HCl(aq). When the liberated H2(g) is collected over water at 29C at 752torr, the volume is found to be 297mL. The vapor pressure of water at 29C is 30.0torr. What is the mass percentage of ...
October 9, 2011 by Cynthia

chemistry
1.If its molar solubility is designated by x, then which of the following expressions best represents the solubility product for the substance Ag2SO4? a) x2 b) 27x4 c) 4x3 d) 108x5 e) 3x4 2. Consider the equilibrium, 4HCl(g) + O2(g) 2H2O(g) + 2Cl2(g). The equilibrium law ...
August 3, 2011 by tt

Chemistry
a solution of HCL is approximately 0.1M and has to be standardized . 1.234g Na2CO3 are dissolved to make 100ml of solution. 20mL of this solution are titrated with the HCL solution, requiring 31.3mL for the second equivalence point. what is the exact concentration of the HCL ...
January 14, 2015 by Joshua

chemistry
how can i Specify what ions are present in solution upon dissolving each of the following substances in water: ZnCl2, HNO3, (NH4)2SO4,Ca(OH)2
October 4, 2009 by nina

chemistry
calcium oxide reacts with water and with nitric acid. State the formula of the calcium compund when: (i) calcium oxide reacts with water (ii) calcium oxide reacts with nitric acid
October 30, 2011 by anastasia

Chemistry
What is the pH of the solution created by combining 12.30 mL of the 0.10 M NaOH(aq) with 8.00 mL of the 0.10 M HCl(aq)? with 8.00 mL of the 0.10 M HC2H3O2(aq)? mL NaOH:12.30 pH w/ HCl _________ pH w/ HC2H3O2 _________ What are the pH values if you take into account that the 8....
April 29, 2012 by HELP!!

Chemistry
What is the pH of the solution created by combining 12.30 mL of the 0.10 M NaOH(aq) with 8.00 mL of the 0.10 M HCl(aq)? with 8.00 mL of the 0.10 M HC2H3O2(aq)? mL NaOH:12.30 pH w/ HCl _________ pH w/ HC2H3O2 _________ What are the pH values if you take into account that the 8....
April 29, 2012 by HELP!!

Chemistry - bobpursley pls help
Posted by candy on Tuesday, September 21, 2010 at 3:12pm. Yes, my NaOH is granular. Why 7ml of 10M HCl? Do I add 7ml of 10M HCl 1st slowly in ice bath, then slowly adjust the pH to 7 using 10M HCl? Then to dilute to 15ml in a graduated cylinder? Thanks Posted by candy on ...
September 21, 2010 by candy

Chemistry
Washing soda is added to hard water to allow soap to lather. A certain brand of washing soda contains partially hydrated sodium carbonate solid. A 0.300 g sample completely reacts with 20.0 mL of 0.250 M hydrochloric acid. a What mass of sodium carbonate was present? b ...
February 19, 2008 by Lauren

chemistry
N2 + O2 2 NO H = 43.2 kcal Based on the reaction shown, which statement is true? A) 43.2 kcal are consumed when 1.00 g of O2 reacts. B) 43.2 kcal are produced when 1.00 mole of NO is produced. C) 43.2 kcal are consumed when 1.00 g of N2 reacts. D) 43.2 kcal are consumed ...
November 9, 2009 by brandy

CHemistry- For Dr.Bob
Hey Dr.Bob, I asked two days ago a question about a titration lab I had that you answered, but I still have one more question about that lab. Here's the lab summary: For my chemistry of solutions class, we had a titration lab where we titrated NaOH into an HCl + H2O mix. This ...
August 2, 2012 by Robert

Chem
Choose the member of each set that you would expect to be more soluble in water. Explain your answer. Chloroform, CH3Cl, or hydrogen chloride. My gut instinct was HCl, however I'm not sure why [or if] it's more soluble than CH3Cl. Of course HCl is more soluble in water than ...
March 20, 2007 by Tasha

Math
What volume, in ml, of a 60% of HCl acid solution must be added to 100 ml of a 30% HCl solution to make a 36% HCl solution. We need 2 alegabreic (?) equations. The first I can get is: 0.36x - 0.60y = 100ml (this is probably wrong)? Blah. I can't get the other one. -.- VolHCL*....
January 31, 2007 by Ariel

Chemistry
2KMnO4(aq)+16HCl(aq)->2MnCl2(aq)+5Cl2(g)+8H2O(l)+2KCl(aq) A.)the volume of 0.414 M KMnO4 needed to produce 1.66 mol MnCl2 B.) the volume of 2.15 M HCl needed to produce 112 mL of 0.618 M KCl C.)the molarity (M) of the HCl solution when 26.42 mL react with 28.38 mL of 0.398 ...
December 10, 2010 by Anonymous

chemistry
when 12.76mL of HCl of unknown concentration (but less than the base) are reacted with 15mL of 3.254M NaOH, 1.68kJ of heat are released. What is the molarity of the HCl solution?
November 23, 2010 by serena

Chemistry
Can someone please explain me how to do this problem? A 25mL solution of 0.5 M NaOH is titrated until neutralization into a 50mL sample of HCl. What was the concentration of the HCl?
February 24, 2011 by Abigail

chemistry
Aluminum reacts with hydrochloric acid to produce aluminum chloride and hydrogen gas. What mass of hydrochloric acid reacts when 87.7 grams of aluminum dissolves? The equation is 2Al+6HCl=2AlCl3+3H2
January 31, 2012 by Kendall

Chemistry
Sorry DrBob, it's me again! Here's the info: Antacid Brand: Life Concentration of HCl: 0.1845 M Concentration of NaOH: 0.1482 M Trial 1: 1.Mass of Table: 1.2173g 2.Volume of HCl added: 75.0 mL 3.Milliomoles of HCl added:(0.1845M x 75.0mL= 13.84 mmoles 4.Volume of NaOH used: 17...
October 18, 2010 by Akhed-To DrBob222

Chemistry
1. A good indicator will have a(n)____ close to this volume and pH. I think it's endpoint but it's wrong. 2. (part a) What is the pH of the solution created by combining 1.70 mL of the 0.10 M NaOH(aq) with 8.00 mL of the 0.10 M HCl(aq)? with 8.00 mL of the 0.10 M HC2H3O2(aq)? ...
April 28, 2012 by Jody

Chemistry
Suppose that 50.0 mL of 0.25 M CH3NH2(aq) is titrated with 0.35 M HCl(aq). (a) What is the initial pH of the 0.25 M CH3NH2(aq)? (b) What is the pH after the addition of 15.0 mL of 0.35 M HCl(aq)? (c) What volume of 0.35 M HCl(aq) is required to reach halfway to the ...
November 3, 2010 by Dana

science
Which of the following samples will react completely with 20.0 mL of 0.200 M LiOH 10.0ML of 0.100 M HCL 10.0mL of 0.200 M H2SO4 10.0mL of 0.100 M HNO3 20.0mL of 0.200 M H3PO4 20.0mL of 0.100 M HBr How do I do this problem??
September 26, 2009 by Nisha

chemistry
For these problem, I know how to solve it, but I have some issues with the formula. I know that, I need to write down the formula first, and then I need to balance the equation, then I can solve it. So, can anyone please check my formula? You don't have to solve the problem ...
September 10, 2009 by hh

Chemistry
Consider the following equilibrium: NH4Cl(s)--->NH3(g) + HCl(g) Suppose a vessel containing NH4Cl(s), NH3(g) and HCl(g) is at equilibrium. If the volume of vessel is instantaneously doubled while keeping the temp constant when a new equilibrium is reacted, which of the ...
February 10, 2013 by Lisa

chemistry
What is the pH of the solution created by combining 11.50 mL of the 0.10 M NaOH(aq) with 8.00 mL of the 0.10 M HCl(aq)? with 8.00 mL of the 0.10 M HC2H3O2(aq)? What are the pH values for HCl and HC2H302 if you take into account that the 8.00 mL of 0.10 M Acid was first diluted...
May 2, 2008 by Trisha

Chemistry
How many mL of concentrated HCl(aq) (36% HCL by mass, d=1.18g/mL_ are required to produce 12.5 L of a solution with ph = 2.10? First I started with finding out the concentration of [H30+] and for that I got 7.94 x 10^-3 but I don't know how to continue.
June 7, 2011 by K

Chemistry
Is Glucose soluble in HCl, NaOH and NaHCO3 because it's soluble in water? - I put soluble for all because it dissolves in water. Is p-toluidine soluble in HCl, NaOH, and NaHCO3? I put soluble in HCl, insoluble in NaOH and insoluble in NaHCO3. Is benzoic acid soluble in HCl, ...
May 25, 2010 by Alex

Chemistry - Ksp
i did an experiment where we titrated HCl on calcium hydroxide, and now i am confused with the calculations, i do not know if i am correct, so please help me out... Trial One volume of HCl used - 11.20mL concentration of HCl - 0.04mol/L so to get moles of HCl i used M= CV is ...
April 25, 2011 by Farah

Chemistry
I posted before about designing a procedure to determine two unknowns (1 solid, 1 solution). The possible solutions were: NaCl, CaCl2, CuSO4, NaOH,Ba(OH)2, HCl, HNO3, or H2O. The reagents given are: NaOH, HCl, AgNO3, Zn metal, Na2SO4, and H2O. The procedure I've designed so ...
November 11, 2007 by Raj

chemistry
Sodium carbonate reacts with nitric acid according to the following equation: Na2CO3+2HNO3-->2NaNO3+CO2+H2O a. how many moles of Na2CO3 are required to produce 100.0 g of NaNO3? b. if 7.50g of Na2CO3 reacts, how many moles of CO2 are produced?
May 28, 2012 by Kay

chemistry
Calculation of )Hf0 for Mg2+(aq.) 1. Assume the heat capacity of the final solution is 3.92 J K-1 g-1. Using the mass of the HCl solution, calculate qcontents from equation (4.6). Calculate qsystem from equation (4.5). 2. Calculate the moles of Mg2+ produced, nrxn. Be sure to ...
March 25, 2011 by Narash

CHEM
Can you please check my work? I got -4.3KJ/mol If this is not right can you tell me what I am doing wrong? Thank you! Questions. 1.a. Use Hess's Law and the measured mean enthalpy changes for the NaOH-HCl and NH3-HCl reactions to calculate the enthalpy change to be expected ...
November 8, 2013 by Lauren

Chemistry -help
To determine the sodium carbonate content & total alkali in NaOH, the following steps were performed:- 1) 2.0g of NaOH was dissolved in 80ml of CO2 free water. 2) 3 drops of phenolphthalein indicator were added and the solution was titrated with 1M HCl. Colour changed from ...
September 18, 2010 by anne

Chemistry
Sorry DrBob, it's me again! Here's the info: Antacid Brand: Life Concentration of HCl: 0.1845 M Concentration of NaOH: 0.1482 M Trial 1: 1.Mass of Table: 1.2173g 2.Volume of HCl added: 75.0 mL 3.Milliomoles of HCl added:(0.1845M x 75.0mL= 13.84 mmoles 4.Volume of NaOH used: 17...
October 19, 2010 by Akhed-To DrBob222

Chemistry
Find the enthalpy of combustion of magnesium using Hess' law given the following data (assume that exactly 100.0 mL of HCl was used in each trial and that HCl is in excess) Magnesium/HCl reaction: Grams of Mg= 0.244g Initial temp= 32.2 degrees celsius Final temp= 21.3 degrees ...
July 21, 2014 by Liz

chemistry
dry gaseous hcl contained in volume of 1L at STP is dissolved in 200ml of 0.5M barium hydroxide soltion. How many mol of 0.5M hcl would be needed to neutralise the resulting solution?
April 2, 2012 by mob

CHEMISTRY HELP !!!!
NH4CL , ZNCL2 , KAL(SO4)2 FIND THE FOLLOWING NET IONIC EQUATION FOR HYDROLYSIS EXPRESSION FOR EQUILIBRIUM CONSTANT (KA OR KB) VALUE THANK YOU SO MUCH!!!
April 10, 2014 by TANYA

CHEMISTRY
A 2.800-g mineral sample was analyzed for its calcium carbonate, CaCO3, content by titrating it with hydrochloric acid (the reaction products are calcium chloride, carbon dioxide, and water). The sample required 28.48 mL of a 0.1505 M HCl solution to react completely. ...
November 28, 2010 by Anonymous

SI Chemistry
hydrogen chloride gas reacts with oxygen gas to yield chlorine gas and water vapor in an equilibrium reaction. an experiment was performed in a closed vessel starting with a mixture of 0.50 M HCl and 0.050 M O2. the amount of chlorine was monitored until no change was observed...
November 30, 2011 by Cody

Biology
Which of the following statements about the compound HCl is true? *The physical and chemical properties of HCl are different from those of H2 and Cl2. *Only the physical properties of HCl are different from those of H2 and Cl2. *Only the chemical properties of HCl are ...
August 15, 2013 by Cassie

Chemistry
Imagine that you are in chemistry lab and need to make 1.00 L of a solution with a pH of 2.70. You have in front of you * 100 mL of 6.0010−2 M HCl, * 100 mL of 5.0010−2 M NaOH, and plenty of distilled water. You start to add HCl to a beaker of water when someone ...
July 9, 2009 by Saira

chemistry
given the following electronegativities Na=0.9, H=2.1, Cl=3.0 which of the following statements is true? H2,Cl2, and HCl are polar covalent molecules NaCl is a polar covalent compound and HCl is an ionic compound HCl is a nonpolar covalent compound and Cl2 is a polar covalent ...
February 23, 2014 by Dee Dee

Chemistry
To a mixture of NaCl and Na2CO3 with a mass of 1.300 g was added 55.00 mL of 0.243 M HCl (an excess of HCl). The mixture was warmed to expel all of the CO2 and then the unreacted HCl was titrated with 0.100 M NaOH. The titration required 7.40 mL of the NaOH solution. What was ...
December 1, 2014 by Gabe

Chemistry
COMPLETION AND BALANCING OF EQUATIONS Complete and balance the following equations: 1. ZnCl2 + AgNO3
March 7, 2007 by Muhammad Ahsan KHan

  1. Pages:
  2. <<Prev
  3. 1
  4. 2
  5. 3
  6. 4
  7. 5
  8. 6
  9. 7
  10. 8
  11. 9
  12. 10
  13. 11
  14. 12
  15. 13
  16. 14
  17. 15
  18. Next>>

Members