Saturday
December 3, 2016

# Search: solenoid

Number of results: 140

Physics -Solinoid
Imagine you shoot an electron beam down the center of an ideal solenoid carrying current I. Which of the following will happen? a)magnitude of the field outside the solenoid will increase. B) The magnitude of the field outside the solenoid will decrease. C) The electron beam ...
November 29, 2013 by Anton Help

PHYSICS PLZ
Imagine you shoot an electron beam down the center of an ideal solenoid carrying current I. Which of the following will happen? a)The magnitude of the field outside the solenoid will increase. b)The magnitude of the field outside the solenoid will decrease c)The electron beam ...
December 2, 2013 by RKP

Physic
An aluminum ring of radius 5.00 cm and resistance 2.00 10-4 Ω is placed around the top of a long air-core solenoid with 997 turns per meter and a smaller radius of 3.00 cm, as in the figure below. If the current in the solenoid is increasing at a constant rate of 267 A/s...
March 12, 2013 by John

Physics
An aluminum ring of radius 5.00 cm and resistance 2.00 10-4 Ω is placed around the top of a long air-core solenoid with 997 turns per meter and a smaller radius of 3.00 cm, as in the figure below. If the current in the solenoid is increasing at a constant rate of 267 A/s...
March 12, 2013 by Kyle

Physics
A cirular coil of 27 turns and radius 15.0cm surrounds a long solenoid of radius 4.7cm and 1.00x103 turns per meter. The two are oriented so that the axis of the coil and the axis of the solenoid are parallel and the center of the coil is at the center of the solenoid. The ...
March 11, 2011 by Matt

physics
A long solenoid ( radius = 1.4 cm) has a current of a 0.34 A in its winding. A long wire carrying a current of 18 A is parallel to and 1.2 cm from the axis of the solenoid. What is the magnitude of the resulting magnetic field at a point on the axis of the solenoid? (Hint: ...
October 28, 2010 by mohab

science
You are at the center of a current-carrying solenoid (#1). You are experiencing a magnetic field B1. You replace this solenoid with a different solenoid (#2). The length of this replacement (#2) is double of (#1) with double as many turns of (#1). You will experience a ...
June 7, 2011 by Kathy

physics
You have two cylindrical solenoids, one inside the other, with the two cylinders concentric. The outer solenoid has length ℓouter = 400 mm, radius R outer = 50 mm, and N outer = 2000 windings. The inner solenoid has length ℓinner = 40 mm, radius R inner = 20 mm, ...
October 24, 2015 by alexw

Physics
A 7.00 x 10 -5 H solenoid is constructed by wrapping 66 turns of wire around a cylinder with a cross-sectional area of 6.2 x 10-4 m2. When the solenoid is shortened by squeezing the turns closer together, the inductance increases to 8.40 x 10-5 H. Determine the change in the ...
March 7, 2013 by Anonymous

Physics
A 5.81 10-5 H solenoid is constructed by wrapping 62 turns of wire around a cylinder with a cross-sectional area of 8.20 10-4 m2 When the solenoid is shortened by squeezing the turns closer together, the inductance increases to 8.94 10-5 H. Determine the change in the length ...
March 17, 2013 by Ashley

tough physics question
A 500 turn solenoid with a length of 20 cm and a radius of 1.5 cm carries a current of 2.0 A. A second coil of four turns is wrapped tightly about this solenoid so that it can be considered to have the same radius as the solenoid. Find the following when the current in the ...
March 31, 2008 by Chris Adison

physics
A long, ideal solenoid has a diameter d=12cm and n=1200turns/meter carrying current I=20A. If the current is lowered at 4.33amp/s to zero, what is the magnitude of the induced electric field in V/m at a position 8.2cm from the solenoid's axis (so at a point outside the solenoid)?
April 7, 2014 by dalton

physics HELP
A long, ideal solenoid has a diameter d=12cm and n=1200turns/meter carrying current I=20A. If the current is lowered at 4.33amp/s to zero, what is the magnitude of the induced electric field in V/m at a position 8.2cm from the solenoid's axis (so at a point outside the solenoid)?
April 7, 2014 by dalton

physics
A long, ideal solenoid has a diameter d=12cm and n=1200turns/meter carrying current I=20A. If the current is lowered at 4.33amp/s to zero, what is the magnitude of the induced electric field in V/m at a position 8.2cm from the solenoid's axis (so at a point outside the solenoid)?
April 7, 2014 by gary

physics
A long, ideal solenoid has a diameter d=12cm and n=1200turns/meter carrying current I=20A. If the current is lowered at 4.33amp/s to zero, what is the magnitude of the induced electric field in V/m at a position 2.2cm from the solenoid's axis (so at a point inside the solenoid)?
April 7, 2014 by gary

physics induced voltage
A 500 turn solenoid with a length of 20 cm and a radius of 1.5 cm carries a current of 2.0 A. A second coil of four turns is wrapped tightly about this solenoid so that it can be considered to have the same radius as the solenoid. Find the following when the current in the ...
March 30, 2008 by Chris Adison

physics induced voltage
A 500 turn solenoid with a length of 20 cm and a radius of 1.5 cm carries a current of 2.0 A. A second coil of four turns is wrapped tightly about this solenoid so that it can be considered to have the same radius as the solenoid. Find the following when the current in the ...
March 30, 2008 by Chris Adison

Physics again sorry
A solenoid of 200 loops of wire that cover a length of 0.1 m. The solenoid carries a current of 4.0 A. What is the strength of the magnetic field inside the solenoid? In this instance do I assume that this time r is 200 x 0.1? Or is it still just 0.1 and I ignore the 200?
April 26, 2010 by Jill

Physics
The magnetic field inside a solenoid is 8.617 mT. If this solenoid sits with its central axis perpendicular to a 30 mT magnetic field, what is the magnitude of the torque on the solenoid
October 12, 2008 by Sandhya

Physics
A cirular coil of 19 turns and radius 10.2cm surrounds a long solenoid of radius 2.6cm and 1.00x103 turns per meter. The two are oriented so that the axis of the coil and the axis of the solenoid are parallel and the center of the coil is at the center of the solenoid. If the ...
March 11, 2011 by Matt

Physics
A battery with EMF 6.0 Volts and internal resistance 0.1 ohms is connected by a long wire to a resistor R = 8.0 ohms. The wire goes around a solenoid. The solenoid has 4000 turns per meter and area 25 cm^2. a) If the current in the solenoid is I = 200 Amps and is constant, ...
October 8, 2012 by Anonymous

A solenoid 20 cm long is constructed from 500 loops of wire and carries a current of 5 A as seen the diagram below. A tiny hole is drilled through the diameter of the solenoid in such a way that the current through the solenoid is not disrupted. If an electron flies through ...
April 1, 2015 by help please!

Physics
A long solenoid ( radius = 1.8 cm) has a current of a 0.33 A in its winding. A long wire carrying a current of 22 A is parallel to and 1.2 cm from the axis of the solenoid. What is the magnitude of the resulting magnetic field at a point on the axis of the solenoid?
October 6, 2011 by Lina

Physics
A long solenoid ( radius = 1.8 cm) has a current of a 0.33 A in its winding. A long wire carrying a current of 22 A is parallel to and 1.2 cm from the axis of the solenoid. What is the magnitude of the resulting magnetic field at a point on the axis of the solenoid?
October 6, 2011 by Lina

Physics
A long solenoid ( radius = 1.8 cm) has a current of a 0.33 A in its winding. A long wire carrying a current of 22 A is parallel to and 1.2 cm from the axis of the solenoid. What is the magnitude of the resulting magnetic field at a point on the axis of the solenoid?
October 6, 2011 by Lina

Physics
A long solenoid ( radius = 1.8 cm) has a current of a 0.33 A in its winding. A long wire carrying a current of 22 A is parallel to and 1.2 cm from the axis of the solenoid. What is the magnitude of the resulting magnetic field at a point on the axis of the solenoid?
October 6, 2011 by Lina

Physics
A long solenoid ( radius = 1.8 cm) has a current of a 0.33 A in its winding. A long wire carrying a current of 22 A is parallel to and 1.2 cm from the axis of the solenoid. What is the magnitude of the resulting magnetic field at a point on the axis of the solenoid?
October 6, 2011 by Lina

Physics
A long wire carries a current of 20 A along the directed axis of a long solenoid. The field due to the solenoid is 4 mT. Find the field at a point 3 mm from the solenoid axis.
December 12, 2012 by Maryam

Physics
A long wire carries a current of 20 A along the directed axis of a long solenoid. The field due to the solenoid is 4 mT. Find the field at a point 3 mm from the solenoid axis.
December 12, 2012 by Maryam

Physics
A solenoid is formed by winding 25.3 m of insulated silver wire around a hollow cylinder. The turns are wound as closely as possible without overlapping, and the insulating coat on the wire is negligibly thin. When the solenoid is connected to an ideal (no internal resistance...
March 20, 2014 by Anonymous

The magnetic field strength along the axis (x'ox) of a solenoid is measured ( o being the center of the solenoid). The adjacent graph represent the length: (The graph represents the variation of B (mT) as a function of x (cm). The numbers on the y axis are 1 2 3 and on the x ...
May 18, 2016 by vicky

physics EM
A 59.0 -turn, 4.10-cm-diameter coil with R = 0.530 {\Omega} surrounds a 1.70-cm-diameter solenoid. The solenoid is 21.0 cm long and has 170 turns. The 60 Hz current through the solenoid is I_sol = (.470A)*sin(2*pi*f*t). I guess f is the frequency. Find the value of I_coil, the...
April 7, 2008 by Spencer

Physics
A 550 turn solenoid is 15 cm long. The current in it is 33 A. A 3.0 cm long straight wire cuts through the center of the solenoid, along a diameter. This wire carries a 22 A current downward( and is connected by other wires that don't concern us). What is the force on this ...
March 2, 2008 by jenish

physics
A solenoid has a cross-sectional area of 2.60 10-4 m2, consists of 600 turns per meter, and carries a current of 0.7 A. A 10 turn coil is wrapped tightly around the circumference of the solenoid. The ends of the coil are connected to a 0.8 resistor. Suddenly, a switch is ...
November 4, 2010 by tee

physics
A solenoid has a cross-sectional area of 2.60 10-4 m2, consists of 600 turns per meter, and carries a current of 0.7 A. A 10 turn coil is wrapped tightly around the circumference of the solenoid. The ends of the coil are connected to a 0.8 resistor. Suddenly, a switch is ...
November 4, 2010 by tee

physics
A solenoid has a cross-sectional area of 2.60 10-4 m2, consists of 600 turns per meter, and carries a current of 0.7 A. A 10 turn coil is wrapped tightly around the circumference of the solenoid. The ends of the coil are connected to a 0.8 resistor. Suddenly, a switch is ...
November 4, 2010 by tee

Physics- Solenoid Questions
1) A technician has been given wire that can safely carry 5 A. She has been instructed to construct a solenoid that will have a magnetic field of 0.06 T at its center. After completing some tests of the wire, the technician finds that the tightest safe winding possible with ...
April 1, 2015 by Meli

physics
A 570-turn solenoid is 19cm long. The current in it is 32A . A 2.0cm -long straight wire cuts through the center of the solenoid, along a diameter. This wire carries a 27A current downward (and is connected by other wires that don't concern us). What is the force on this wire ...
April 8, 2013 by bud

physics
A 570-turn solenoid is 19cm long. The current in it is 32A . A 2.0cm -long straight wire cuts through the center of the solenoid, along a diameter. This wire carries a 27A current downward (and is connected by other wires that don't concern us). What is the force on this wire ...
April 8, 2013 by bud

Physics
with this one i'm confused i'm not sure if it's b or d The current in a solenoid is changed from 1.1 A to 4.4 A. By what factor does the magnitude of the magnetic field inside the solenoid increase? 2 4 0.5 0.25 1.1/4.4= 0.25 0r 4.4/1.1= 4
June 9, 2014 by Me and I

PHYSICS
A 29.4 cm long solenoid 1.10 cm in diameter is to produce a field of 0.360 T at its center. How much current should the solenoid carry if it has 1000 turns of the wire?
April 3, 2010 by JOSE

Physics
A 5.0 amp current flows through a 0.20m long solenoid with 1500 loops What are the magnitude and direction of the magnetic field at the centre of the solenoid?
February 2, 2015 by Sandara

physics
Hi! could anyone help me with this question please, I really don't know how to do this at all. Thank you so much. Question:A 330 turn solenoid with a length of 21.0 cm and a radius of 1.40 cm carries a current of 2.10 A. A second coil of four turns is wrapped tightly around ...
March 15, 2010 by Chan

Physics
A long solenoid has 1400 turns per meter of length, and it carries a current of 2.0 A. A small circular coil of wire is placed inside the solenoid with the normal to the coil oriented at an angle of 90.0˚ with respect to the axis of the solenoid. The coil consists of 46 ...
October 19, 2014 by Elle

Physics II
As a new electrical technician, you are designing a large solenoid to produce a uniform magnetic field with a magnitude of 0.170 T near the center of the solenoid. You have enough wire for 3300 circular turns. This solenoid must have a length of 1.70 m and a diameter of 23.0 ...
July 10, 2007 by Tifani

PHYSIC
What current is required in the winding of a long solenoid that has 1000 turns uniformly distributed over a length of 0.4 m, to produce at the center of the solenoid a magnetic field of magnitude 1.0 x 10 -4 T?
September 3, 2011 by KAIT

PHYSIC
What current is required in the winding of a long solenoid that has 1000 turns uniformly distributed over a length of 0.4 m, to produce at the center of the solenoid a magnetic field of magnitude 1.0 x 10 -4 T?
September 3, 2011 by KAIT

Physics
The current flowing in a solenoid that is 20.9 cm long and has a radius of 2.40 cm and 552 turns decreases from 3.51 A to 1.03 A in 0.250 s. Determine the magnitude of the induced electric field inside the solenoid 1.20 cm from its center.
April 4, 2015 by Kayla

Physics
You need to produce a solenoid that has an inductance of 2.51 μH . You construct the solenoid by uniformly winding 1.17 m of thin wire around a tube. How long, in centimeters, should the tube be?
April 28, 2013 by JD

physics
hi can somebody help me with this?? a solenoid of length L and radius R carries a current I in its N turns. what is the total energy stored in the magnetic field within the solenoid? Compute the inductance L using the solenoid formula. You should be able to find the formula in...
August 5, 2007 by spencer

physics 30
A magnet dropped through a vertical solenoid will fall at a rate that is slower than gravity, and will induce an electric current within the solenoid. which physics principle explain these phenomena ?
March 21, 2012 by sarah

Physics
A wire of thickness d = 5 mm is tightly wound 200 times around a cylindrical core to form a solenoid. A current I = 0.1 A is sent through the wire. What is the magnetic field on the axis of the solenoid?
March 5, 2013 by April

Physics - Electromagnetism
An inductor in the form of a solenoid contains 440 turns and is 15.8 cm in length. A uniform rate of decrease of current through the inductor of 0.421 A/s induces an emf of 175 µV. What is the radius of the solenoid?
August 16, 2012 by Robert

Physics
Along solenoid is wound with 500 turns permeter and the current in its windings is increasing at rate of 20A/s .If the cross sectional area of solenoid 5cm^2.what will be the rate change of magnetic flux
April 11, 2016 by Ermias

physics
Problem 25.49 A 1.40-m-diameter MRI solenoid with a length of 2.80 m has a magnetic field of 2.50 T along its axis. Part A - If the current is turned off in a time of 1.2 s, what is the emf in one turn of the solenoid's windings? Express your answer using two significant figures
October 9, 2011 by Paige

PHYSICS HELP
A long, ideal solenoid has a diameter d=12cm and n=1200turns/meter carrying current I=20A. If the current is lowered at 4.33amp/s to zero, what is the magnitude of the induced electric field in V/m at a position 8.2cm from the solenoid's axis
April 8, 2014 by dan

Physics
A long, ideal solenoid has a diameter d=12cm and n=1200turns/meter carrying current I=20A. If the current is lowered at 4.33amp/s to zero, what is the magnitude of the induced electric field in V/m at a position 8.2cm from the solenoid's axis
April 9, 2014 by gary

Physics
A solenoid is 3.2 m long and has 500 turns per meter. What is the cross-sectional area of this solenoid if it stores 0.32 J of energy when it carries a current of 12 A? So I used L = 2*E / I^2; and then I used A = L*l / (uo * N^2) but my answer isn't coming out right at all. ...
April 14, 2013 by Valerie

Physics
A single-turn square loop of side L is centered on the axis of a long solenoid. In addition, the plane of the square loop is perpendicular to the axis of the solenoid. The solenoid has 1490 turns per meter and a diameter of 6.00 cm, and carries a current of 2.46 A. Find the ...
April 7, 2013 by Valerie

physics
A solenoid is wound with a single layer of insulated copper wire of diameter 2.800 mm and has a diameter 5.000 cm and is 1.500 m long. Assume that the adjacent wires touch and that the insulation thickness negligible. what is the inductance per meter(H/m) for the solenoid near...
February 21, 2010 by Andy

physics
A solenoid is wound with a single layer of insulated copper wire of diameter 2.800 mm and has a diameter 5.000 cm and is 1.500 m long. Assume that the adjacent wires touch and that the insulation thickness is negligible. what is the inductance per meter(H/m) for the solenoid ...
February 21, 2010 by Andy

College Physics
A solenoid is wound with 290 turns per centimeter. An outer layer of insulated wire with 200 turns per centimeter is wound over the solenoid's first layer of wire. When the solenoid is operating, the inner coil carries a current of 10 A and the outer coil carries a current of ...
February 19, 2010 by Lanise

Physics
You need to make a 100 microH inductor on a cylinder that is 5.0 cm long and 1.0 cm in diameter. You plan to wrap four layers of wire around the cylinder. What diameter wire should you use if the coils are tightly wound with no space between them? The wire diameter will be ...
April 13, 2008 by Jill

physics
A 380 turn solenoid of length 32.0 cm and radius 3.10 cm carries a current of 4.80 A. Find the following. (a) the magnetic field strength inside the coil at its midpoint mT (b) the magnetic flux through a circular cross-sectional area of the solenoid at its midpoint T · m2
March 9, 2010 by christiam

Physics
A solenoid with 200 turns and a cross sectional area of 60 cm^2 has a magnetic field of .60 T along its axis. If the field is confined within the solenoid and changes at a rate of .20 T/s, the magnitude of the induced potential difference in the solenoid will be: a) .00020V b...
November 13, 2011 by Jasmine

physics
a) Find the inductance of an ideal solenoid with 300 turns, length 0.5m, and a circular cross section of radius 0.02m. b) A solenoid with = 1000, = 1.0 cm and = 50cm is concentric within a second coil of = 2000, = 2.0 cm, and = 50cm. Find the mutual inductance assuming free ...
January 8, 2011 by fati

Physics
To construct a solenoid, you wrap insulated wire uniformly around a plastic tube 12 cm in diameter and 45 cm in length. You would like a 2.0-A current to produce a 2.1-kG magnetic field inside your solenoid. What is the total length of wire you will need to meet these ...
March 24, 2013 by Valerie

physics
A coil with 210 turns, a radius of 5.2 cm, and a resistance of 11 ohms surrounds a solenoid with 160 turns/cm and a radius of 4.6 cm . The current in the solenoid changes at a constant rate from 0 to 6.4 A in 0.11 s. Calculate the magnitude of the induced current in the coil.
May 19, 2011 by tammy

PHYSICS
A coil with 150 turns , a radius of 5.0 cm , and a resistance of 12 ohms surrounds a solenoid with 230 turns/cm,and a radius of 4.5 cm. The current in the solenoid changes at a constant rate from 0 to 2 A in 0.10 sec. Calculate the magnitude and direction of the induced ...
March 18, 2008 by jenish

physics
A coil with 150 turns , a radius of 5.0 cm , and a resistance of 12 ohms surrounds a solenoid with 230 turns/cm,and a radius of 4.5 cm. The current in the solenoid changes at a constant rate from 0 to 2 A in 0.10 sec. Calculate the magnitude and direction of the induced ...
March 18, 2008 by raks

Physics
A solenoid has N=1760.0 turns, length d=40 cm , and radius b=0.4 cm, (b<<d) . The solenoid is connected via a switch, S1 , to an ideal voltage source with electromotive force ϵ=7 V and a resistor with resistance R=25 Ohm . Assume all the self-inductance in the ...
May 23, 2013 by Anonymous

Physics repost
Suppose you wish to make a solenoid whose self-inductance is 1.2 mH. The inductor is to have a cross-sectional area of 1.2 10-3 m2 and a length of 0.048 m. How many turns of wire are needed? Can you please clarify this for me. When I first post it my reponse was: # turns= # of...
October 9, 2007 by Mary

Physics
A solenoid has N=1760.0 turns, length d=40 cm , and radius b=0.4 cm, (b<<d) . The solenoid is connected via a switch, S1 , to an ideal voltage source with electromotive force ϵ=7 V and a resistor with resistance R=25 Ohm . Assume all the self-inductance in the ...
May 22, 2013 by Anonymous

Physics
A solenoid has N=1568.0 turns, length d=32 cm , and radius b=0.2 cm, (b<<d) . The solenoid is connected via a switch, S1 , to an ideal voltage source with electromotive force ϵ=13 V and a resistor with resistance R=25 Ohm . Assume all the self-inductance in the ...
May 23, 2013 by Annoyingmous

physics
A circular wire is connected to a galvanometer. A solenoid is placed inside the circular wire. The solenoid has 520 turns per meter, a cross-sectional area of 0.007 m^2 and a current charge from 0A to 0.7A in 1.25 ms. The circular wire has a n are of 0.01m^2 and a resistance ...
October 22, 2015 by carolyn

PHYSICS
An electron is initially at rest in, but not on the axis of, a solenoid that is carrying a steady current I directed as shown in the cross section below. The electron is initially at rest on the -x axis. The current in the solenoid is suddenly increaed to 2I. In what direction...
December 15, 2013 by Marc

physics
Compare the total magnetic energy in two solenoids, each with N turns, area A, and current I, but length x and 2x. Denote Ux the total magnetic energy in the solenoid with length x, and U2x the one in the solenoid with length 2x. What is U2x/Ux?
April 12, 2013 by dd

Physics
Advanced electronic techniques utilize microscopic structures. Consider a single-turn solenoid in which the radius and the length of the solenoid are both of the order 10 microns, and a parallel plate capacitor in which the plate separation and the radius of the plates are ...
March 29, 2016 by SomeoneSexy

Physics
An inductor is in the built in the shape of a solenoid of radius 0.20 cm, length 4.0 cm, with 1000 turns. This inductor is connected to a generator supplying an rms voltage of 1.2×〖10〗^(-4) V AC at an angular frequency of 9.0×〖10〗^3 radians/s. (a...
April 25, 2010 by Lee

PHYSICS
An electron is initially at rest in, but not on the axis of, a solenoid that is carrying a steady current I directed as shown in the cross section below (counterclockwise). The electron is initially at rest on the -x axis. The current in the solenoid is suddenly increased to ...
December 17, 2013 by asha

Physics
Two ends of the narrow coil are connected to the terminals of an oscilloscope. The solenoid, which was orginally 40cm long is rapidly extended to 140cm long in 50ms. Assume the solenoid is pulled at uniform speed at both ends.. B=3.02*10-3 T magnetic flux density.Narrow coil ...
May 27, 2013 by Jayy

physics..
Two ends of the narrow coil are connected to the terminals of an oscilloscope. The solenoid, which was orginally 40cm long is rapidly extended to 140cm long in 50ms. Assume the solenoid is pulled at uniform speed at both ends.. B=3.02*10-3 T magnetic flux density.Narrow coil ...
May 27, 2013 by Jayy

SCIENCE
WHAT IS SOLENOID
February 16, 2012 by SREEVENI

physics
voltage of a solenoid
July 21, 2013 by Anonymous

Physics
1)A wire is carrying a current, i, in the positive y-direction. The wire is located in a uniform magnetic field, B, oriented in such a way that the magnetic force on the wire is maximized. The magnetic force acting on the wire, FB, is in the negative x direction. What is the ...
October 23, 2011 by Jessica

Physics
1)A wire is carrying a current, i, in the positive y-direction. The wire is located in a uniform magnetic field, B, oriented in such a way that the magnetic force on the wire is maximized. The magnetic force acting on the wire, FB, is in the negative x direction. What is the ...
October 23, 2011 by Jessica

Physics
1)A wire is carrying a current, i, in the positive y-direction. The wire is located in a uniform magnetic field, B, oriented in such a way that the magnetic force on the wire is maximized. The magnetic force acting on the wire, FB, is in the negative x direction. What is the ...
October 23, 2011 by Jessica

Physics
1)A wire is carrying a current, i, in the positive y-direction. The wire is located in a uniform magnetic field, B, oriented in such a way that the magnetic force on the wire is maximized. The magnetic force acting on the wire, FB, is in the negative x direction. What is the ...
October 23, 2011 by Jessica

Physics
1)A wire is carrying a current, i, in the positive y-direction. The wire is located in a uniform magnetic field, B, oriented in such a way that the magnetic force on the wire is maximized. The magnetic force acting on the wire, FB, is in the negative x direction. What is the ...
October 23, 2011 by Jessica

Physics
A long wire that carries a current is bent into a solenoid with upward current in the front looking. If the observer could "see" the magnetic field inside this arrangement of solenoid from the right side, how would it appear? a) The observer would "see" a north pole b) The ...
November 14, 2010 by Blake

Physics
can someone explain how a "solenoid" wire works?
May 26, 2008 by Tom

physics
how can a solenoid be used to fire4 small ball?
April 12, 2010 by M. B

physics
what is the importance/significance of calculating the magnetic flux density of a solenoid?
May 22, 2016 by hannah

Physics
You know you should not have bought the "MRI in a Box" kit from the Home Shopping Channel. Its main solenoid is supposed to have a radius of r=0.28 m, a length of L=0.1 m, and 12000 windings. The wire they give you has a resistance of 13 mΩ per meter. With only air ...
October 21, 2015 by Anonymous

Physics
What is the formula to find magnetic field at the centre of the solenoid of hollow iron core??
July 19, 2013 by Anonymous

physics
is increasing the current a valid method to increase the induced voltage when a magnet moves into a solenoid?
May 1, 2012 by hannah

Science
Which of the following would increase the magnetic field around a wire? A. solenoid B. insulator C. conductor D. resistor
April 22, 2014 by Anonymous

Physics
The current in a very long, tightly wound solenoid with radius a and n turns per munit length varies in time according to the equation i(t)=Ct^2, where the current i is in amps and the time t is in seconds, and C is constant with appropriate units. Concentric with the solenoid...
November 13, 2011 by Jasmine

Physics
The current in a very long, tightly wound solenoid with radius a and n turns per munit length varies in time according to the equation i(t)=Ct^2, where the current i is in amps and the time t is in seconds, and C is constant with appropriate units. Concentric with the solenoid...
November 13, 2011 by Jasmine

Physics
The current in a very long, tightly wound solenoid with radius a and n turns per munit length varies in time according to the equation i(t)=Ct^2, where the current i is in amps and the time t is in seconds, and C is constant with appropriate units. Concentric with the solenoid...
November 13, 2011 by Jasmine

1. Pages:
2. 1
3. 2
4. Next>>