Sunday
May 1, 2016

Search: potassium permanganate reacts with oxalic acid h2c204

Number of results: 10,587

Science
The solubility of potassium nitrate is 40 at 30 degree celcius. Calculate the mass of water required to make a saturated solution by dissolving 15 gram of potassium nitrate at that temperature. Could u guys help me to get answer of this question. Plz help me otherwise my marks...
March 29, 2016 by Dniyā

Chemistry
Iron reacts with HCl solution to give H2 gas and Fe2+ ions. Suppose that 5.3 g of iron are to be dissolved in 1.7 M HCl. What is the minimum volume (in mL) of the acid solution required to react with all of the iron?
September 11, 2011 by Dave

Chemistry
Iron reacts with HCl solution to give H2 gas and Fe2+ ions. Suppose that 6.5 g of iron are to be dissolved in 1.4 M HCl. What is the minimum volume (in mL) of the acid solution required to react with all of the iron?
September 12, 2011 by BillyBob

chemistry
Iron reacts with HCl solution to give H2 gas and Fe2+ ions. Suppose that 5.4 g of iron are to be dissolved in 1.1 M HCl. What is the minimum volume (in mL) of the acid solution required to react with all of the iron?
September 13, 2011 by Carolina

CHEMISTRY
Silver reacts with nitric acid to form nitrogen monoxide, silver nitrate and water. Calculate the volume of nitrogen monoxide gas (@STP) that can be produced from the reaction of 5.00g of silver?
October 7, 2013 by Pip

Chemistry
Iron reacts with HCl solution to give H2 gas and Fe2+ ions. Suppose that 3.6 g of iron are to be dissolved in 1.2 M HCl. What is the minimum volume (in mL) of the acid solution required to react with all of the iron?
October 1, 2014 by Lester

Chemistry
Solid sodium carbonate reacts with hydrochloric acid to give sodium chloride,carbon dioxide and water. When writing the ionic equation, do I need to write Na2CO3(s)or do I write CO32-(aq) on the left hand side of the equation?
April 7, 2009 by candy

Chemistry
This lab is ruining me. isopentyl acetate is a blend of isopentanol, acetic acid, and sulfuric acid. How can products be determined from this information? ethyl acetate is ethyl alcohol, acetic acid and sulfuric acid. Octyl Acetate is n-octanol, concentrated acetic acid and ...
January 13, 2010 by Aidan

chemistry
what effect would each of the errors decribed below have on the concentration of potassium hydrogen phthalate... 1) so of the solids potassium hydrogen phthalate will spilled when transfering into the beaker... 2) not enough water was added to bring the volume up to the mark
March 13, 2011 by peter

Chemisrty
if electricity of sufficient voltage is passed into a solution of potassium iodide in water, a reaction takes place in which elemental hydrogen gas and elemental iodine are produced, leaving a solution of potassium hydroxide. what is the unbalanced equation?
March 20, 2016 by Mandy

chemistry
Am doing a lab report on the determination of the product of a redox reaction: the reaction of bromate and hydroxylammonium ions. here is the lab Experiment: In this experiment you will determine the equation of a redox reaction by the use of experimental data. This is a ...
October 26, 2010 by khela

chemistry
Hi there, ok, my question stated "Use information from acid/base table and the value of Kw t ocalulate the base ionization constant, Kb, of the following bases: a)hypochlorite ion b) nitrite ion c) benzoate ion I looked at my acid/base table but it only gives values for ...
April 8, 2008 by Jay

chemistry
what would be observed when combining an aqueous mixture of: potassium carbonate and hydrochloric acid, zinc chloride and silver nitrate, magnesium chloride and sodium hydroxide, ammonium nitrate and sodium hydroxide?
February 28, 2016 by sarah

Chemistry
Iron 3 hydroxide reacts with acetic acid to form iron 3 acetate and water. If 45.4g of water are formed,what mass of iron 3 acetate will be produced? Fe(OH)3+3HC2H3O2--->Fe(C2H3O2)+3H2O 45.4H2O( ? Fe(C2H3O)) ---------------------------------------- ( ? H2O)
January 18, 2015 by G

pcc
A volume of 40.0mL of aqueous potassium hydroxide (KOH) was titrated against a standard solution of sulfuric acid (H2SO4). What was the molarity of the KOH solution if 21.7mL of 1.50 M H2SO4 was needed? The equation is 2KOH(aq)+H2SO4(aq)→K2SO4(aq)+2H2O(l)
July 15, 2013 by jose

Chemistry
A volume of 80.0mL of aqueous potassium hydroxide (KOH) was titrated against a standard solution of sulfuric acid (H2SO4). What was the molarity of the KOH solution if 21.7mL of 1.50 M H2SO4 was needed? The equation is 2KOH(aq)+H2SO4(aq)→K2SO4(aq)+2H2O(l)
February 24, 2014 by carley

Chemistry
if you could just help me set them up the would do me some good. Thanx A. In the single reaction of chlorine and potassium bromide, how many grams of potassium chloride can be produced from 200.g each of chlorine and potassium bromide? Identify the limiting reactants. B. In ...
October 29, 2007 by Monte'

Chemistry
Expt #1- Molecular Weight of Unknown Acid Unknown Acid: #2 Mass of Unknown solid acid transferred:0.414g Volume of volumetric flask: 100.00 mL Concentration of NaOH: 0.0989 M Aliqot of acid titrated with NaOH: 25.00 mL Average volume of Naoh from titration: 13.9 mL Here's ...
October 10, 2010 by Rayana

Chemistry
Copper metal reacts with concentrated nitric acid according to the following balanced equation: 3Cu(s) + 8HNO3(aq) 3Cu(NO3)2(s) + 2NO(g) + 4H2O(l) Calculate the mass in grams of the excess reagent remaining after the complete reaction of 4.63 g of Cu with 9.26 g of HNO3. ...
November 6, 2007 by Hector

Chemistry
The solubility of compounds containing the carboxylic acid group can be increased by reaction with a) sulfuric acid b) nitric acid c) sodium hydroxide d) water e) benzoic acid Would it be sodium hydroxide since it is a base?
March 21, 2010 by Kristin

Chemistry (Acids and Bases)
The natural pH of rainwater is 5.6. The acidity of rainwater is caused by the dissolution of (TRUE OR FALSE) boric acid sulfuric acid carbonic acid calcium carbonate calcium oxide nitric acid
March 20, 2011 by Andy

Chemistry-Please help
A solution contains one or more of the following ions: Hg2 2+,Ba2+ ,Fe2+ and . When potassium chloride is added to the solution, a precipitate forms. The precipitate is filtered off and potassium sulfate is added to the remaining solution, producing no precipitate. When ...
October 5, 2009 by Rose

chemistry
What is the chemical equation for: 1. Cyclohexane and Potassium Manganate VII 2. Cyclohexen and Potassium Manganate VII
May 18, 2010 by Abigail

chem090
100.0 g of Potassium Phosphate reacts with 100.0 g of Barium Chloride. Which molecule is completely used up by the reaction? How many grams of the other molecule are left over? When I started with 100.0 g of K3PO4 I got 147.1g of BaCl2. When I started with 100.0g of BaCl2 I ...
April 14, 2014 by Jenny

chemistry
I need to balance hydrolysis equations for the following salts,copper(II) nitrate, sodium tetraborate, sodium bromide, calcium sulfite, potassium sulfate,potassium chloride, sodium acetate, and ammonium bromide.
June 5, 2009 by dan

science
If boiling permanganate eliminates possible reducing agents in a solution, do I still need to do blank titration?
February 5, 2009 by aimee

Chemistry
The question says Sufuric acid reacts with Aluminum hydroxide by double replacement. I have the reactant side I just need the product side because I need to know does aluminium replace Hyrdrogen, really confused see Ms J question above
February 25, 2007 by Beautiful

chemistry
HNO3 (g) + 4H2 (g) NH3 (g) + 3H2O (g)deltaH = -637 kJ Calculate the enthalpy change when one mole of hydrogen reacts and What is the enthalpy change when 10.00 g of ammonia is made to react with excess of steam to form nitric acid and hydrogen gases?
March 8, 2008 by cooper

chemistry
HNO3 (g) + 4H2 (g) ---> NH3 (g) + 3H2O (g) deltaH = -637 kJ Calculate the enthalpy change when one mole of hydrogen reacts; and What is the enthalpy change when 10.00 g of ammonia is made to react with excess of steam to form nitric acid and hydrogen gases?
March 8, 2008 by cooper

chem
HNO3 (g) + 4H2 (g) ---> NH3 (g) + 3H2O (g) deltaH = -637 kJ Calculate the enthalpy change when one mole of hydrogen reacts; and What is the enthalpy change when 10.00 g of ammonia is made to react with excess of steam to form nitric acid and hydrogen gases?
March 8, 2008 by Anonymous

college
If 0.0900 g of a metal, M, reacts with excess hydrochloric acid to form 5.00*10(exp.)-3 moles of hydrogen gas and a solution of MCl(subscript)3. Calculate the molar mass of metal, M and identify it. The unbalanced equation is: M(s)+ HCl(aq) =>MCl(sub.)3 + H(sub)2.
November 30, 2010 by Alex

chemistry help!
I have a chemistry test tomorrow and I'm trying to study but none of these questions in the book make sense to me:( Help! 1. Commericially available concentrated sulfuric acid is 95% H2SO4 by mass and has a density of 1.84g/mL. How many milliliters of this acid are needed to ...
October 18, 2009 by Maycee

Chemistry
Calculate the volume of 2.503 N HNO3 added to 100 mL of HCl in order to prepare 1.1251 N acid solution from the following data: 58.96 mL NaOH will neutralize 2.521g of potassium tetroxalate and 45.57 mL of HCl will neutralize 53.0 mL of the NaOH solution.
January 21, 2014 by Summer

Chemistry
In this experiment NaOH is standardized to titrate it with vinegar so thtat the percent by mass of the acetic acid can be determined. How does dissolved CO2 in distilled water affect the accuracy of the determination of a NaOH solution's concentration? How is the term acid ...
March 29, 2014 by Sandy

Chemistry
1. How many moles of ammonia NH3 are produced when 0.45 moles of nitrogen N2 reacts? N2 + 3H2 yields 2NH3 2. How many mililiters of water will be produced when 2.05 g of hydrogen reacts? The density of water is 1.00 g/mL ? 2H2 + O2 yields 2H2O 3. What is the limiting reactant ...
March 18, 2015 by Melanie

Chemistry
Phosphoric acid, H3PO4(aq), is a triprotic acid, meaning that one molecule of the acid has three acidic protons. Estimate the pH, and the concentrations of all species in a 0.250 M phosphoric acid solution. [H3PO4] = ? [H2PO4^-] =? [HPO4^2-]=? [PO4^3-]=? [H^+]=? [OH^-]=? pH=?
March 5, 2015 by Anna

Chem
Dissolving 3g of ascorbic acid in 50g of acetic acid lowers the freezing point of acetic acid by 1.33degreesC. What is the molecular mass of ascorbic acid?
May 2, 2012 by james

chemistry
If the acid base reaction HA(aq)+B^-(aq)---> HB(aq)+A^-(aq) <--- has a k = 10^-4,which of the following statements are true & why? (a)HB is a stronger acid than HA (b)HA is a stronger acid than HB (c)HA & HB have same acidity (d)B^- is a stronger base than A^- (e)A^- is ...
January 1, 2010 by chikirshu

chem-acid-base titrations
Acetic acid (HC2H3O2) is an important component of vinegar. A 10.00mL sample of vinegar is titrated with .5052 M NaOH, and 16.88 mL are required to neutralize the acetic acid that is present. a.write a balanced equation for this neutralization reaction b.what is the molarity ...
April 21, 2008 by natash

science
Ions are eletrically charged particles that are formed when certain compounds are dissolved in water. These solutions will conduct eletricity. The swedish scientist Svante Arrhenius coined the term ion (which means wanderer) to explain why solutions of eletrolytes will conduct...
May 1, 2008 by barby

Chemistry
Benzene, C6H6, reacts with nitric acid, HNO3. Two products are formed, one of which is water. The second product has a molar mass of 213 grams. The second product is composed of 33.8% carbon, 1.42% hydrogen, 19.7% nitrogen, and 45.1% oxygen. Write a balanced chemical equation ...
April 17, 2015 by Melissa

Chem
Sulfuric acid, H2SO4, reacts with CaF2 according to: CaF2 + H2SO4 ---> CaSO4 + 2 HF What is the minimum amount, in g, of impure H2SO4 (which is 83.5% H2SO4 by mass) that would be required to produce 16.2 g of HF when reacted with excess CaF2 ? Could someone walk me through ...
May 16, 2009 by rory

chemisrty
Q1) A solution of ascorbic acid (C6H8O6, Formula mass = 176 g/mol) is made up by dissolving 80.5 g of ascorbic acid in 210 g of water, and has a density of 1.22 g/mL at 55 oC. Calculate the following: a) the mass percentage of ascorbic acid b) the mole fraction of ascorbic ...
January 16, 2012 by lyan

college
Please explain with complete step by step instructions. #8)One type of lawn fertilizer consists of a mixture of nitrogen, phosphorus and potassium. An 80lb sample contains 8 move lbs of nitrogen and phosphorus than potassium. There is 16lb more potasssium than 5 times the ...
November 23, 2010 by Lee

NEED HELP WITH CHEMISTRY HW
Ascorbic acid (vitamin C) is a diprotic acid having the formula H2C6H6O6. A sample of a vitamin supplement was analyzed by titrating a 0.2894 g sample dissolved in water with 0.0215 M NaOH. A volume of 10.83 mL of the base was required to completely neutralize the ascorbic ...
October 1, 2011 by Anonymous

chemistry
I have two solutions of 0.1 Molar. A solution of magnesium chloride and a solution of potassium chloride. I thought that the 0.1 M solution of magnesium chloride would conduct electricity better than a 0.1 M solution of potassium chloride. I did a lab in my chemistry class but...
May 11, 2011 by charlie

chemistry
When aqueous solutions of potassium carbonate and magnesium nitrate are combined, solid magnesium carbonate and a solution of potassium nitrate are formed. The net ionic equation for this reaction is:
March 3, 2014 by Kay

chemistry
The decomposition of potassium chlorate (KClO3) is used as a source of oxygen in the laboratory. How much potassium chlorate is needed to produce 10.2 mol of oxygen? Answer in units of mol
December 1, 2014 by DEANA

Chemistry please help
How would an HA acid behave in water if it were a strong acid, weak acid, and non-electrolyte?
March 31, 2012 by Robert

chem
Malonic acid and succinic acid each have two different pKa values. Malonic Acid pKas: 2.85 and 5.70. Succinic acid pKas: 4.20 and 5.60. Explain clearly why the first pKa of malonic acid is lower than the first pKa of succinic acid, and why the second pKa of malonic acid is ...
October 16, 2007 by Rossel

chemistry 12
The pH of a certain acid having a concentration of 0.20M was measured. The pH was 2.50. Was this a strong acid or weak acid?
October 13, 2011 by Mike

Physical Science
Suppose you dissolve 40g of potassium nitrate in 100 cm3 of water at 100 C. If half the solution os poured out, how many grams of potassium nitrate will the remaining solution contain?
February 7, 2011 by Matthew

chemistry
Potassium has a lattice energy of -163.8 kcal/mol and a heat of hydration of -155.5 kcal/mol. How much potassium nitrate needs to dissolve in water to absorb 114 kJ of heat?
September 2, 2011 by Lola

chemistry
Potassium has a lattice energy of -163.8 kcal/mol and a heat of hydration of -155.5 kcal/mol. How much potassium nitrate needs to dissolve in water to absorb 114 kJ of heat?
September 2, 2011 by Lola

chemistry
I need help with these questions 1. Calculate the percentage by mass of potassium in potassium sulfate K2 SO4 2. calculate the percentage by mass of nitrogen in ammonium nitrate Nh4 No3
January 25, 2015 by Victoria

chemistry
A student is asked to standardize a solution of barium hydroxide. He weighs out 0.986 g potassium hydrogen phthalate (KHC8H4O4, treat this as a monoprotic acid). It requires 27.8 mL of barium hydroxide to reach the endpoint. A. What is the molarity of the barium hydroxide ...
October 5, 2015 by charlotte

Inorganic chemistry
write a balanced half-reaction for the reduction of permanganate ion, Mn04, to Mn02 in a basic solution
April 11, 2009 by Steve

college Algebra
Please explain with complete step by step instructions. #8)One type of lawn fertilizer consists of a mixture of nitrogen, phosphorus and potassium. An 80lb sample contains 8 move lbs of nitrogen and phosphorus than potassium. There is 16lb more potasssium than 5 times the ...
November 22, 2010 by Lee

AP Chem
A student chemist named Hannah Montana set up an electrical conductivity tester similar to that shown on page 141 and conducted an experiment involving two clear, colorless liquids, identified as solution A and solution B. Solution A and Solution B are both 0.050 M. The ...
October 11, 2010 by dylan

Chemistry help needed
How do I prepare 90% formic acid from conc. formic acid (98%-100% of density 1.22g/ml)? Please help me check if my calculations are correct. Assuming conc. formic acid is 99%, 0.99 X 1.22 = 1.2078 Add 1.2078 / 9 = 0.1342ml H2O to 1ml of conc. acid to have a solution that is 90...
December 17, 2008 by tricia

chemistry
A piece of an aluminum can was cut into small pieces. Then 0.422 g of the chips from the can was used to prepare potassium alum according to the procedure we used. Calculate the theoretical yield (in g) of potassium alum that could be obtained in the reaction. (Alum MW=474.41 ...
December 2, 2014 by Jim

chemistry
A 0.010 M solution of a weak monoprotic acid has a pH of 3.70. What is the acid-ionization constant, Ka, for this acid? a. 2.0 10-4 b. 2.0 10-5 c. 4.0 10-6 d. 4.0 10-7 e. 4.0 10-8
May 13, 2010 by zacky

Science
A 10 mL sample of tartaric acid (a diprotic acid) is titrated with 20 mL of 1.0 M NaOH. What is the molarity of the acid?
December 29, 2011 by Fahmi

Algebra
A chemist has one solution of 20% acid and another of 50% acid. how many millimeters of each are needed to obtain 30 ml of 30% acid?
March 13, 2015 by TJ

Chemistry
Can the 5% approximation be used to determine the pH of the following solutions? How do I do this question? (A) 0.56 M hypochlorous acid - yes (B) 3.00 M nitrous acid - yes (C) 0.010 formic acid - no
December 15, 2010 by LISA

Chemistry
Item 1 Maleic acid is a carbon-hydrogen-oxygen compound used in dyeing and finishing fabrics and as a preservative of oils and fats. In a combustion analysis, a 1.054-g sample of maleic acid yields 1.599 g of CO2 and 0.327 g of H2O. When 0.609 g of maleic acid is dissolved ...
June 16, 2015 by Samantha

chem
Ok so i looked at it and tried to figure out the conj. base and acid. Are these right? 1) S2-(aq) + HCl(aq) <=>Cl1-(aq) + HS1-(aq) This is what I think it is: Acid = HCl Base = S^2- Conjugate acid =HS^1- Conjugate base = Cl^1- 2) H2O2(aq) + PO43-(aq) <=>HPO42-(aq...
January 29, 2012 by Erik

Chen=mistry
Sodium metal reacts violently with water to form NaOH and release hydrogen gas. Suppose that 3.00 g of Na reacts completely with 3.00 L of water and the final volume of the system is 3 L. What is the molarity M of the NaOH Solution formed by the reaction?
May 1, 2013 by Janet

Chemistry- Acids and Buffers
Cyanic Acid is a weak acid HOCN + H2O <--> H3O+ +OCN- ka= 3.5*10^-4 a) if 2.5ml of 0.01 M cyanic acid solution is added to 25.0 ml of a formis acid buffer with ph = 3.70, what is the ratio of [OCN-]/[HOCN] in the resulting solution? b) determine the pH of a 0.500 M ...
April 9, 2012 by Tasneem

Chemistry
If a rate of 80.0 mL of an aqueous solution of potassium hydroxide concentration of 0.25 mol / L are partially neutralized by 20.0 mL of an aqueous solution of nitric acid concentration of 0.50 mol L. Determine pH of the final solution. kOH + HNO3 -> H2O + KNO3
January 20, 2016 by Mara

Chemistry
Phosphoric acid, H3PO4(aq), is a triprotic acid, meaning that one molecule of the acid has three acidic protons. Estimate the pH, and the concentrations of all species in a 0.100 M phosphoric acid solution. pKa1 = 2.16 pKa2 = 7.21 pKa3 = 12.32 [H3PO4] = ? [H2PO4-] = ? [HPO42...
February 26, 2013 by Nancy

Chemistry
Phosphoric acid, H3PO4(aq), is a triprotic acid, meaning that one molecule of the acid has three acidic protons. Estimate the pH, and the concentrations of all species in a 0.300 M phosphoric acid solution. kPa1: 2.16 kPa2: 7.21 kPa3:12.32 [H3PO4] = ? [H2PO4-] = ? [HPO42...
March 10, 2013 by Paula

Chemistry
1 g of acid was mixed with 120 ml of distilled water and the solution was filtered into a clean dry beaker. A 25 ml aliquot of this solution was titrated with 0.1120 M NaOH. The pH of the acid was recorded to be 4.42. Calculate the initial concentration of the weak acid and ...
March 25, 2013 by Annie

math
For a experiment, Jenna needs to make a dilute solution that is 10 ounces of 40% acid. But Jenna only has solutions that are 30% acid and 70% acid. How many ounces of 70% acid solutions should she use? A. 2.5 ounces B. 5 ounces C. 7.5 ounces D. 8 ounces Not sure if I would ...
April 12, 2015 by vincent

Chemistry-DrBob222
Is HBr an acid? I got mixed up between telling if its a salt or acid, but salts do not have H+ ions, so would it be an acid?
October 12, 2010 by Anonymous

chem
Predict out of which of the following would a dialysis bag be permeable to? Potassium Ions= DNA= Sucrose= No? Starch =No? Sulfate Ion=yes Chloride Ion=yes Protein=No I'm not sure about potassium ions or DNA though.
April 18, 2012 by al

chem/science
A piece of an aluminum can was cut into small pieces. Then 0.422 g of the chips from the can was used to prepare potassium alum according to the procedure we used. Calculate the theoretical yield (in g) of potassium alum that could be obtained in the reaction. (Alum MW=474.41 ...
November 24, 2014 by Caroline

Chemistry-Dr Bob help!!
0.100 M solution of a weak acid, HX, is known to be 15% ionized. The weak acid has a molar mass of 72 g/mol. 1. What is Ka for the weak acid? 2. What is the pH of the buffer prepared by adding 10.0 g of the sodium salt of the acid (NaX) to 100.0 mL of 0.250 M HX
April 4, 2012 by clayton

chemisty
0.100 M solution of a weak acid, HX, is known to be 15% ionized. The weak acid has a molar mass of 72 g/mol. 1. What is Ka for the weak acid? 2. What is the pH of the buffer prepared by adding 10.0 g of the sodium salt of the acid (NaX) to 100.0 mL of 0.250 M HX
April 4, 2012 by Clayton

Chem
1. What is the molarity of a copper(II) dihydroxide [Cu(OH)2] solution if 25.25 mL of the solution is titrated to the equivalence point with 36.18 mL of 0.549 M prussic acid [H(CN)]? 2. What volume of a 0.138 M dihydroxyl base solution is needed to neutralize 28.47 mL of 0.745...
March 29, 2015 by TK

Chemistry
Rank the following solutions in order of increasing acidity. 1 M phenol 1 M boric acid 1 M cyanic acid 1 M formic acid 1 M hydrochloric acid 2. Rank the following solutions in order of increasing basicity. 1 M C3H5O3Na 1 M KF 1 M KOCN 1 M KOCl All I know is that HCl is the ...
October 23, 2011 by Neha

Chemistry
Some drain cleaners contain a mixture of sodium hydroxide and aluminum which reacts with water as follows: 2Al(s)+2 NaOH(aq)+6H2O(l)->2Na[Al(OH)4](aq)+3H2(g) What mass of hydrogen gas can be produced when 5g Al reacts with sufficient NaOH and H2O) according to the above ...
November 1, 2009 by Christina

Chemistry
A 0.60 M solution of a weak acid, HA, has a pH of 3.72. What is the percentage ionization of the acid? What is the value of Ka for the acid?
April 16, 2014 by Anonymous

Chemistry pH
A 0.60 M solution of a weak acid, HA, has a pH of 3.72. What is the percentage ionization of the acid? What is the value of Ka for the acid?
April 17, 2014 by Penny

Chemistry
A 8.71 g sample of an aqueous solution of hydroiodic acid contains an unknown amount of the acid. If 25.0 mL of 0.388 M barium hydroxide are required to neutralize the hydroiodic acid, what is the percent by weight of hydroiodic acid in the mixture? I understand how to solve ...
November 20, 2011 by Hannah

chemistry
Weak Acid 1.) The pH of a 0.060M weak monoprotic acid HA is 3.44. Calculate the Ka of the acid. 2.) The pH of 0.100M solution of weak monoprotic acid HA is 2.85. What is the Ka of the acid?
January 20, 2011 by jaycab

chemistry
Weak Acid 1.) The pH of a 0.060M weak monoprotic acid HA is 3.44. Calculate the Ka of the acid. 2.) The pH of 0.100M solution of weak monoprotic acid HA is 2.85. What is the Ka of the acid?
January 20, 2011 by jaycab

Chemistry
Phosphoric acid, H3PO4(aq), is a triprotic acid, meaning that one molecule of the acid has three acidic protons. Estimate the pH, and the concentrations of all species in a 0.300 M phosphoric acid solution. pKa1: 2.16 pKa2: 7.21 pKa3: 12.32 Hint: Convert the pKa values to Ka ...
March 9, 2013 by Paula

Science
Which of the following is a nonelectrolyte? a) C3 H8 (propane gas) b) H2 SO (sulfuric acid) c) HCL (hydrochloric acid) d) HNO 3 (nitric acid) e) NaCL (table salt)
May 1, 2008 by Nathaly

chemistry
A 3.555 g sample of a monoprotic acid was dissolved in water. It took 23.32 mL of a 0.875 M NaOH to neutralize the acid. Calculate the molar mass of the acid.
March 21, 2012 by blair

chemistry
A 3.555 g sample of a monoprotic acid was dissolved in water. It took 23.32 mL of a 0.875 M NaOH to neutralize the acid. Calculate the molar mass of the acid.
March 21, 2012 by blair

bio101
Carbon dioxide forms a weak acid called carbonic acid when dissolved in water. How can this be a significant factor in the formation of acid rain?
August 6, 2013 by merry

Physics help
an isolated container holding 5 kg of sulfuric acid is at 60 C. if 2.49x10^5 Joules of energy were transferred out of the acid, what would be the new temp. of the acid?
November 12, 2014 by HELP

Chemistry
What acid and what strong base would react in aqueous solution to produce the following salts in the formula equation? Write the balanced formula equation for each reaction. a) potassium perchlorate b) cesium nitrate c) calcium iodide I don't need just the answers, I'm ...
December 28, 2011 by Steven

Chemistry
Pure ethanoic acid (25.0cm3, CH3COOH), pure ethanol (35.0 cm3, C2H5OH) and pure water (20.0cm3, H2O) were mixed in a sealed flask at room temperature. The flask was placed in a heated water bath and maintained at 323K until equilibrium was established. CH3COOH(aq) + C2H5OH(aq...
May 1, 2012 by Henry

chem
Alka-Seltzer contains the base sodium hydrogen carbonate, NaHCO3, which reacts with hydrochloric acid in the stomach to yield sodium chloride, carbon dioxide, and water. What volume of CO2 gas at 104.5 kPa and 311 K would be formed when 10.0 mL of 1.0 M HCl is mixed ...
April 6, 2015 by vc

Chemistry
Trichloroacetic acid (CCl3CO2H) is a corrosive acid that is used to precipitate proteins. The pH of a 0.050 M solution of trichloroacetic acid is the same as the pH of a 0.040 M HClO4 solution. Calculate Ka for trichloroacetic acid.
November 23, 2011 by Kaleen

Chemistry- Drbob-help
I have placed the answer I got please help. A student makes a solution by dissolving 55.8 grams of potassium hydroxide in 875.0 grams of water. The resulting solution has a density of 1.07 grams per milliliter. 1. What is the volume of this solution? 870mL 2. Calculate the % ...
February 9, 2011 by Paul

chemistry
You want to make an acetic acid/acetate buffer, pH 3.8, with a volume of 250 mL, and a final concentration of ([AcOH] + [AcO-]) = 0.1 M. You may only use acetic acid and sodium acetate (no strong acid or base). How many mL of glacial acetic acid would be needed (d = 1.05 g/mL)?
March 7, 2009 by Anonymous

Chemistry
When 3.00 g potassium carbonate (K2CO3 ) was mixed with 20.0 mL of hydrochloric acid (HCl, 4.0M) in a calorimeter, the temperature raised 3.0 degrees Celsius. B. Calculate the enthalpy change (H) of the reaction for per mole patassium carbonate. Assume the specific ...
April 15, 2012 by Luis

  1. Pages:
  2. <<Prev
  3. 2
  4. 3
  5. 4
  6. 5
  7. 6
  8. 7
  9. 8
  10. 9
  11. 10
  12. 11
  13. 12
  14. 13
  15. 14
  16. 15
  17. 16
  18. Next>>