Friday
November 28, 2014

Search: how many mL urea solution required to react with Fe3+

Number of results: 25,560

Networking LANs
You have been contracted to build a network for a multimedia development firm that currently uses a 10-Mbps Ethernet network. The company requires a high-bandwidth network for the multimedia team, which constantly views and manipulates large files across the network. The ...
September 29, 2008 by Beth

science
how many ml distilled water is required to prepare 2% sucrose solution from 2% 2liter sucrose solution from 20% sucrose solution?
August 13, 2012 by sefali

Chem
A 0.2181 g sample of KHP required 17.29 mL of sodium hydroxide solution to reach the phenolphthalein end point. Calculate the molarity(M) of the NaOH solution.
October 9, 2012 by Donnie

chemistry
A total of 2.00 \rm mol of a compound is allowed to react with water in a foam coffee cup and the reaction produces 115 g of solution. The reaction caused the temperature of the solution to rise from 21.0 to 24.7 ^\circ \rm C. What is the enthalpy of this reaction? Assume that...
October 2, 2011 by Anonymous

chemistry
Sulfur and chlorine can react together to form S2Cl2. When 1.00g of this sulfur chloride reacted with water, 0.36g of a yellow ppt of sulfur was formed together with a solution contianing a mixture of sulfurous acid, H2SO3, and HCl acid. Use the above data to deduce the ...
April 10, 2013 by hina

chemistry
When magnesium metal and an aqueous solution of hydrochloric acid combine, they produce an aqueous solution of magnesium chloride and hydrogen gas. Using the equation, Mg (s) + 2HCl (aq) → MgCl2 (aq) + H2 (g), if 48.6 g of Mg and 150.0 g of HCl are allowed to react, ...
July 8, 2014 by Kyra

chemistry
A home swimming pool is disinfected by the daily addition of 0.50 gal (1 gal = 3.785 L) of a "chlorine" solution–NaOCl in NaOH(aq). To maintain the proper acidity in the pool, the NaOH(aq) in the "chlorine" solution must be neutralized. By experiment it is found that about 220...
October 9, 2012 by joe

Chemistry
A 5.00-mL sample of an H3 PO4 solution of unknown concentration is titrated with a 0.1003 M NaOH solution. A volume of 6.55 mL of the NaOH solution was required to reach the endpoint. What is the concentration of the unknown H3 PO4 solution?
March 11, 2013 by Amee

chemistry
if you react magnesium solution and lead powder together is there a temperature change?
January 9, 2011 by Beth

Chemistry
What is the molarity of a 37.50 mL sample of HNO3 solution that will completely react with a 23.70 of .0100 M NaOH?
June 7, 2011 by Chirag

Chemistry
How many milliliters of 0.277 M AgNO3 solution are needed to react completely with 47.1 mL of 0.278 M NaCl solution? How many grams of AgCl will be formed? The reaction is NaCl(aq) + AgNO3(aq) → AgCl(s) + NaNO3(aq)
November 1, 2011 by Lynn

Chemistry
the following acid—base neutralization reaction HNO3 (aq)+ KOH (aq) --KNO3(aq) + H2O (I) What is the molarity (M) of an HNO3 solution if 50.0ml is needed to react with 25.0ml of 0.150M KOH solution?
October 20, 2012 by Tasha

Chemistry
A 11.0-mL sample of an unknown H3PO4 solution requires 116mL of 0.140 KOH to completely react with the H3PO4. What was the concentration of the unknown H3PO4 solution (answer in M). H3PO4(aq) + 3KOH(aq) --> 3H2O(l) + K3PO4(aq)
July 23, 2014 by April

Chemistry
Hi, i'm really desperate! could anyone please help me with this question, I'm stumped. 'A buffer is prepared by mixing a 100.omL of a 0.100 M NH3 solution with a 0.200M solution of NH4CL solution and making the total volume up to 1.000L of water. What is the volume of NH4Cl ...
December 11, 2012 by emily

chemistry
An aqueous solution of nitric acid is standardized by titration with a 0.121 M solution of calcium hydroxide. If 24.5 mL of base are required to neutralize 15.4 mL of the acid, what is the molarity of the nitric acid solution?
October 9, 2014 by arch

chemistry
A 0.0875 M solution of aqueous ammonia was titrated with a solution of sulphuric acid. If 25.00 mL of the ammonia solution required 30.66 mL of the acid to reach the end-point, calculate the molarity of the acid. NH3(aq) + H2SO4(aq) ¨ (NH4)2SO4(aq)
January 10, 2008 by caleb

chemistry
if 36.23mL of a standard 0.1959M NaOh solution is required to neutralize 25.00mL of H2SO4. what is the Molarity of the acid solution, balance the equation. Please help with calculation. Thank you for your help.
September 1, 2012 by kate- Please help

chemistry
how many liters of ammonia are required to react with 1 mole of oxygen gas at 850 degrees centigrade and 5 atm in order to produce nitrogen monoxide and water vapor at the same conditions
December 8, 2012 by amanda

Chemistry
How many grams of fluorine are required to react with 100g of NaBr in the following reaction: F2 + 2NaBr --> 2NaF + Br2 Also, does this show 1 F2 molecule or 2 F2 molecules and how will i write it with the conversion factors with units?
May 21, 2013 by Timofey

Chemistry
The concentration of a certain sodium hydroxide solution was determined by using the solution to titrate a sample of potassium hydrogen phthalate (abbreviated KHP). KHP is an acid with one acidic hydrogen and a molar mass of 204.22 g/mol. In the titration 34.67 mL of the ...
October 7, 2014 by melbell

Chem 2
calculate the vapor pressure of a solution made by dissolving 61.7g (molar mass= 60.06g/mol) of Urea in 212ml of water at 35C. what is the vapor pressure lowering? the vapor pressure of water at 35c =31.82 mmHg
October 9, 2014 by PleaseHelp

chemistry
25ml of a solution of na2c03 having a specific gravity of 1.25g ml required 32.9ml of a solution of hcl containing 109.5g of the acid per litre for complete neutralization. Calculate the volume of 0.84N heso4 that will be compltetly neutralized by 125g of na2c03 solution The ...
February 17, 2013 by Fai

Intro to LAN technologies
58. You have been contracted to build a network for a multimedia development firm that currently uses a 10-Mbps Ethernet network. The company requires a high-bandwidth network for the multimedia team, which constantly views and manipulates large files across the network. The ...
March 14, 2010 by Sylvia

Chemistry
How many grams of hydrochloric acid are required to react completely with 4.30 grams of zinc? I got 4.80g HCl for the answer but do not know how to do part 2 which is, How many molecules of a gas will be produced? Thanks.
October 21, 2007 by lucy

Chemistry
what volume of oxygen gas measured at 25C and 760 torr is required to react with 1.0L of methane measured under the same conditions of temperature and pressure?
March 24, 2012 by Mitch

Analytical Chemistry
How many milliliters of 0.0560 M EDTA are required to react with 50.0 mL of 0.0170 M Cu^2+? With 50 mL of 0.0170 M Sc^3+? My work so far: (50mL)(0.0170mmol/mL)= 0.85 mmol Cu^2+ I'm not sure how to do the rest. Please help.
March 4, 2013 by Sam

College chemistry
What is the volume in milliliters of 0.1069 M Cr2O72- required to react with 252.4 mL of 0.08013 M Cl- according to the reaction below? 6 Cl-(aq) + Cr2O72-(aq) + 14 H+(aq) ® 3 Cl2(g) + 2 Cr3+(aq) + 7 H2O(l)
October 10, 2014 by madoo

chemistry
A total of 2.00mol of a compound is allowed to react with water in a foam coffee cup and the reaction produces 185g of solution. The reaction caused the temperature of the solution to rise from 21.0 to 24.7C . What is the enthalpy of this reaction? Assume that no heat is lost ...
November 25, 2011 by Yuli

chemistry
In a titration experiment, 22.00mL of a NaOH solution are required to neutralize 24.02 mL of a 0.1094 M HCL solution. what is the molarity of H+ in the HCL solution? (same as the molarity of HCL)
November 9, 2011 by sari

Chemistry
What volume of 0.174 M Na3PO4 solution is necessary to completely react with 89.1 mL of 0.106 M CuCl2?
October 10, 2010 by Anonymous

chemistry
How many moles of Na2CO3 would be needed to react with 750 mL of 0.250 M H2SO4 solution?
April 1, 2011 by Emily

Chemistry
calculate the volume of 1.07M phosphoric acid solution necessary to react with 22.9 ml of 0.150M Mg(OH)
May 1, 2013 by Juan

biology
I need to know how egg whites would react when tested in iodine and Benedict's solution.
September 22, 2013 by Em

chemistry
0.5g of fuming h2s04 oleum is diluted with water. This solution is completely neutralized by 26.7ml of 0.4N naoh. Find the percentage of free s03 in the smaple solution. The answer 20.6% Assume that 50ml of 0.01M edta solution were added to 25ml of solution and the excess edta...
March 3, 2013 by Fai

holy school
CaCO3 + H2 SO4 ------> CaSO4 + CO2 + H2 O 200 g of calcium carbonate are added to 4 L of water. a. What is the molarity of the calcium carbonate solution? b. How many moles of hydrogen sulfate would be needed to react with a 25 mL sample of the calcium carbonate solution? c...
March 3, 2013 by mamta

chemistry step for step thank a lot
10L of hard water required 5.6g of lime for removing hardness. Hence temporary hardness in ppm of cac03. The answer 1000 I think ppm= 1mg/1L 10L x 100g/mol cac03 = 1000 Who check it for me step by step Thank all tutors for your help. How many ml of a 0.05M kmno4 solution are ...
July 5, 2014 by ken

Chemistry
How many milimetres of 0.114 M sulphuric acid solution provide the sulfuric acid required to react with the sodium hydroxide in 32.3 ml of 0.122 M NaOH according to the following equation? H2SO4 + 2 NAOH ---> Na2SO4 + 2 H20 A millimeter is a unit of length, not volume. I am...
September 11, 2006 by Cadi Almond

Chemistry
Recently I solved for how many mL of 5% BaCl2.2H20 solution was required to precipitate sodium sulfate. Now the question asks what if the sodium sulfate was potassium sulfate instead. Would the volume required be higher or lowered than the sodium sulfate and why? I got that ...
October 10, 2011 by Mika

chemistry
hello this is ellie again. I need help on this one problem A solution of 0.314M KOH is used to neutralize 10.0mL H3PO4 solution. H3PO4(aq) + 3KOH(aq) → K3PO4(aq) + 3H2O(l) If 29.3mL KOH solution is required to reach the endpoint, what is the molarity of the H3PO4 ...
December 3, 2013 by ellie

Chemistry
In aqueous solution, hydrochloric acid, HCl, and sodium carbonate, Na2CO3 react to produce gaseous carbon dioxide, CO2, water, H2O and sodium chloride, NaCl. A 10.0 g impure sample of Na2CO3 is dissolved completely in water; then treated with 3.00 mol L−1 HCl to evolve ...
June 15, 2014 by Olivia

Chemistry-help me! ASAP
can i ask for the 3D model of ammonium cyanate, picture, formula mass, physical and chemical properties? I could not find the model or diagram on the Web. The properties I gave previously is all I could find. Ammonium cyanate is only absolutely stable below 143K, above that it...
August 29, 2005 by Danielle Stacey

Chemistry
A solution of I2 was standardized with ascorbic acid. Using a .1000 g sample of pure ascorbic acid, 25.32 mL of I2 were required to reach the starch end point. A. What is the molarity of the iodine solution? B. What is the titer of the iodine solution?
November 10, 2010 by Candy

Chemistry
A solution of I2 was standardized with ascorbic acid. Using a .1000 g sample of pure ascorbic acid, 25.32 mL of I2 were required to reach the starch end point. A. What is the molarity of the iodine solution? B. What is the titer of the iodine solution?
November 10, 2010 by Candy

Chemistry
The problem on my homework is: What mass in grams of iron metal is required to react with 2.50 L of .1500 M of sulfuric acid to produce 18.35g of iron (III) sulfate? please help!
May 23, 2010 by Lauren

College Chemistry
how many grams of metallic copper are required to react with the number of moles of Cu2+ , 0.16mol, to form CuCl overall reaction can be taken as: Cu2+(aq) + 2 Cl- (aq) + Cu(s)-->2CuCl(s)
October 7, 2010 by Maggie

math
0.224g sample that contained only bacl2 and kbr required 19.7ml of 0.1M agn03 to react the end point. Calculate the percent of each compound present in the sample
December 21, 2013 by Fai

chemistry(Urgent Please help)
A student is asked to standardize a solution of barium hydroxide. He weighs out 0.945 g potassium hydrogen phthalate (KHC8H4O4, treat this as a monoprotic acid). It requires 33.9 mL of barium hydroxide to reach the endpoint. A. What is the molarity of the barium hydroxide ...
November 20, 2011 by Hannah

Chemistry
A solution contains Cr3+ ion and Mg2+ ion. The addition of 1.00 L of 1.55M NaF solution is required to cause the complete precipitation of these ions as CrF3(s) and MgF2(s). The total mass of the precipitate is 49.9g .Find the mass of Cr3+ in the original solution.
October 1, 2014 by Dee

About Chemistry
The vapor pressure of pure water at 25 °C is 23.8 torr. Determine the vapor pressure (torr) of water at 25 °C above a solution prepared by dissolving 35 g of urea (a nonvolatile, non-electrolyte, MW = 60.0 g/mol) in 75 g of water. im not sure about the steps for problems like ...
September 15, 2010 by BEN

chem
methanoic acid react with potassium dichromate to form what? A colorless solution and CO2 is formed as known
November 9, 2008 by david

chemistry
What is the percentage purity of sample if 3.92g of mohr's salt react completely with 50 ml N/10 Kmno4 solution
June 25, 2012 by ketaki

Chemistry
Why would copper (II) sulfate solution react with iron to produce 3 CuSO4(aq) + 2 Fe (s) = 3 Cu (s) + Fe2(SO4)3 (aq)
May 22, 2014 by Victoria

Chem
The following questions refer to the following system: A total of 30.0 mL of a .10M solution of a monophonic acid (Ka = 1.0 x 10 ^-5) is titrated with .20M sodium hydroxide solution. 1) Before the titration begins, the pH of the solution is about A) 2 B) 5 C) 7 D) 9 E) 12 2) ...
April 6, 2014 by Charlie

Chemistry105
1. (a) What is the molarity of a solution prepared by dissolving 4.315 g of NaOH in water to exactly 100 mL in a graduated flask? (Na = 23.0; O = 16.0' H = 1.0 amu).    (b) What volume of the above solution is required to neutralize exactly 25.00 mL of 0.1500 M HCl solution...
December 4, 2012 by Mira

Chemistry
Oxygen gas reacts with powdered aluminum according to the following reaction: 4Al(s)+3 O2(g) --> 2 Al2O3 (s) How many liters of O2 gas, measured at 789 mm Hg and 35 C, are required to completely react with 2.2 mol of Al?
April 16, 2010 by Eileen

Chemistry
You have a stock solution of 5.0 M H2SO4. How many mL of stock solution are required to make 136 mL of 1.6 M H2SO4 solution
April 8, 2013 by Linzy

chemistry
Which of the following solutes dissolved in 1000 g of water would provide a solution with the LOWEST freezing point? A. 0.030 mole urea, CO(NH2)2 B. 0.030 mole acetic acid, CH3COOH C. 0.030 mole ammonium nitrate, NH4NO3 D. 0.030 mole calcium sulfate, CaSO4 E. 0.030 mole barium...
June 20, 2010 by random

Chemistry
A standard solution of FeSCN2+ is prepared by combining 9.00 mL of 0.200 M Fe(NO3)3 w/1.00 mL of 0.0020 M KSCN. The equilibrium concentration of FeSCN2+ ([FeSCN2+]std) for this standard solution is assumed to be M. What permits this assumption? A. The concentration of Fe(NO3)...
June 20, 2011 by Neil

Chemistry
What is the molarity of a 5.00 x 102 ml solution containing 2490 g of KI? How many moles of LiF would be required to produce a 2.5 M solution with a volume of 10.5 L? How many grams of NaI would be used to produce a 2.0 M solution with a volume of 10.00 L? Very confused on ...
March 24, 2014 by Clea

Chemistry
A titration involves titrating 0.4 M NaOH into a solution of 0.2 M H3PO4. a.) Calculate the volume of NaOH that will be required to reach the first equivalence point. b.) Calculate the volume of NaOH required to reach the second equivalence point. Other information: 10 ml ...
February 8, 2014 by Anonymous

Chemistry
Some solid copper(II) sulfate is dissolved in sufficient water to make 100.0 mL of solution. Enough of a sodium hydroxide solution of concentration 0.1500 mol/L is added just to react with all of the first solution, with none left over. This turns out to be a volume of 47.08 ...
February 22, 2011 by OLGA

Physical Science
24. What happens when a solution of nitric acid (HNO3) is added to a solution of potassium hydroxide (KOH)? What are the products? 25. Which of the following compounds can react with H2SO4 to form a salt: NaCl, Ca(OH)2, HF, AlCl3, H2O, Mg(OH)2? Name the salt(s) that would form...
October 15, 2013 by Alexandra

chemistry
An HNO3 solution has a pH of 3.04. What volume of 0.015 M LiOH will be required to titrate 89.0 mL of the HNO3 solution to reach the equivalence point?
January 5, 2012 by Anonymous

chemistry
A 0.115-L sample of an unknown HNO3 solution required 31.1 mL of 0.100 M Ba(OH)2 for complete neutralization. What was the concentration of the HNO3 solution?
July 7, 2012 by Anonymous

Chemistry
A 0.110-L sample of an unknown HNO3 solution required 52.1 mL of 0.150 M Ba(OH)2 for complete neutralization. What was the concentration of the HNO3 solution?
November 9, 2013 by Lori

Chemistry
Hello, I need help with calculations for lab. I prepared excess NaOH and HCL solutions (unknown conc., ~0.1M). Then I standardized my NaOH solution by titrating known amounts of KHP (Potassium hydrogen phthalate)with it in the presence of phenolphthalein (indicator turns pink ...
September 20, 2009 by Pavel

chemistry - vapor pressure
the vapor pressure of pure water at 25C is 23.8 torr. determine the vapor pressure (torr) of water at 25 C above a solution prepared by dissolving 35g of urea (a nonvolatile, non-electrolyte, MW = 60.0G/MOL) IN 76G of water. answer:21 i just want to know the steps bc im ...
September 13, 2010 by billy

Chemistry
Exactly 23.6 ml of a 0.131 N HCl solution was required for complete neutralization of 25.0 ml of an NaOH solution.What was normality of the NaOH?
June 25, 2011 by Rajan Khare

chem
What volume of a 8.50M Na2CO3 solution would be required to prepare 220.00mL of a 8.20%w/v Na2CO3 solution?
November 29, 2011 by darren

Chemistry105
A 10.00 mL volume of sulfuric acid required 23.65 mL of NaOH solution for complete neutralization. What is the molarity of the acid solution?
December 18, 2012 by Mira

Math
A chemistry teacher needs 2.5 liters of a sulfuric acid solution that is 20% sulfuric acid and 80% water . He has 2 liters of a 15% sulfuric acid solutionleft over from earlier laboratory exercises. He also has 44 liters of a 50% solution. Let x represent the number of liters ...
May 31, 2011 by Paul

Chemistry
How many milliliters of a 2.5 hydrochloric acid solution would be needed to react completely with 32.0 grams of magnesium metal
June 16, 2011 by Kyle

chemistry
What volume of 0.010M silver nitrate will exactly react with 20ml of 0.0080M socium chloride solution?
January 26, 2013 by bliss

Chemistry, stochiometry2
The no. Of moles of KMnO4 that will be needed to react with one mole of sulphite ion in acidic solution is.......
September 5, 2013 by Aman

AP Chemistry
When hydrochloric acid reacts with magnesium metal, hydrogen gas and aqueous magnesium chloride are produced. What volume of 5.0 M HCI is required to react completely with 3.00 g of magnesium?
November 8, 2009 by Angel

Chemistry
When hydrochloric acid reacts with magnesium metal, hydrogen gas and aqueous magnesium chloride are produced. What volume of 9.0 M HCl is required to react completely with 5.00 g of magnesium?
October 19, 2010 by Mattie

Chemistry
A given solution contained potassium chloride, KCl, and hydrochloric acid. 25 cm3 of it needed 24.80 cm3 of 0.0986 M sodium hydroxide solution to neutralize the acid, and the neutral solution then required 23.55 cm3 of 0.2 M silver nitrate, AgNO3, solution to precipitate all ...
October 6, 2014 by Desirai

Chemistry
A 5.00-mL sample of a sulfuric acid solution of unknown concentration is titrated with a 0.1401 M Sodium Hydroxide solution. A volume of 5.99 mL of the base was required to reach the endpoint. What is the concentration of the unknown acid solution? Write the neutralization ...
June 24, 2013 by Steptim

Chemistry
If 36.00 mL of KMnO4 solution are required to oxidize 25.00mL of 0.02932 M Na2C2O4 solution what is the concentration of KMnO4?
November 2, 2010 by Tilly

Chemistry
Given the following chemical equation: 3 Cu + 8 HNO3 = 3 Cu(NO3)2 + NO + 4 H2O. How many moles of HNO3 are required to react with 6 moles of Cu?
July 14, 2008 by Persia

Chemistry
Vinegar is a dilute solution of acetic acid. In the titration of 5.00 mL of vinegar, 39.75 mL of 0.137 M sodium hydroxide solution was required to neutralize the vinegar to a phenolphthalein end point. Calculate each of the following of the vinegar. (a) the molarity : I got 1....
April 3, 2011 by Mark

chemistry
a 10.0mL sample of an unknown H3PO4 solution requirs 112mL of 0.100 M KOH to completely react with the H3PO4. What was the concentrartion of the unknown H3PO4 solution? H3PO4 + 3KOH -----> 3H2O + K3PO4 Ive seen these problems with one volume but not two volumes Im lost ...
November 3, 2011 by Monique

Chemistry
A student has 100.0 mL of an unknown solution of Vitamin C. She removes 1.00 mL of this solution, dilutes it to 50.0 mL, and titrates this second solution with an iodine solution that is 8.5 × 10-4 M. 6.60 mL of iodine solution is required to reach the endpoint. 1. How many ...
March 12, 2012 by Shelley

chemistry
Calculate the volume of 0.1 molar hydrochloric acide solution required for titration of 20 ml of 0.5 molar sdium carbonat solution till complete reaction
December 21, 2010 by Anonymous

physics
How many grams of KOH are required to neutralized 300ml of 5.0 N HN03 solution? final answer nyan 84 grams kailangan nalang namen ng solution
April 10, 2012 by jhon earl

chemistry
find the mass of sucrose(molecular mass=342)required to be dissolved per 600cm3 solution to prepare a semi molar solution
July 31, 2013 by anonymous

chemistry
2) Suppose you have 5.00g of powdered magnesium metal, 1.00L of 2.00M potassium nitrate solution, and 1.00L of a 2.00M silver nitrate solution. a. Which one of the solutions will react with the magnesium powder?
March 17, 2013 by Anonymous

chemistry
. How many grams of H2SO4 (98.1 g·mol-1) are required to react with 4.0 g NaOH (40.0 g·mol-1) in this neutralization reaction?H2SO4 + 2NaOH  Na2SO4 + 2H2O a. 2.4 g b. 4.9 g c. 9.8 g d. 20 g
December 11, 2011 by anonymous

Chemistry
How many grams of chlorine are required to react completely with 5.00 grams of sodium to produce sodium chloride ? 2na + cl2 → 2nacl
March 29, 2013 by mispa

Stoichiometry
So I have this question it reads Consider the generic chemical reaction How many moles of B are required to completely react with 2A + 3B ==> 3C 1. 6 mol of A 2. 2 mol of A I won't put them all just guide me in the right direction please
October 5, 2011 by Monique

chemistry
#1)hydrochloric acid is a relatively strong acid . imagine that HCl is added to a buffer solution containing the weak acid phosphoric acid and a salt a)will HCl react with weak acid (H3PO4), or will it react with the salt (Na2HPO4)? b)one product of this reaction will be a new...
August 23, 2011 by sandy

organic chemistry
malonic ester with urea gives
January 11, 2013 by navraj

chemistry
0.5 L of a 0.30 M HCl solution is titrated with a solution of 0.6 M KOH. a)What is the pH before addition of KOH? b)What is the total number of moles of acid? c)What is the pH after addition of 125 mL of KOH solution? d)What volume of the KOH solution is required to reach the ...
April 28, 2011 by Joe

Chemistry
Assuming the sample is pure sodium sulfate, how many mL of 5% BaCl2.2H20 solution would be required to precipitate the sulfate. Density of barium shloride solution of 1.00 g/mL.
October 8, 2011 by Mika

difficult chemistry
Calculate the molarity of thiosulfate solution if 0.400mg of Kl03 required 100ml of the thiosulfate solution provided that excess kl and hcl were added. Who helps me
January 12, 2013 by Fai

chemistry
determine the molarity of a 18 ml sample of HCl solution that is required to prepare 30 ml of 2.3 M HCl solution?
February 11, 2011 by linda

chemisty
how many mL of a stock 2.50M HCI solution are required to prepare 25.mL of a 0.15M HCI solution?
November 23, 2014 by latrese

Chemistry
How many mL of a stock 2.50M HCl solution are required to prepare 25.0 mL of a 0.15M HCl solution?
November 23, 2014 by Hannah

chemistry
The solid oxide of generic metal M is added to 75 mL of water and reacts to produce a basic solution that is 0.20 M in the resulting compound. Neutralization of the solution required titration with 27 mL of 0.56 M HCl. How many valence electrons must M have?
March 2, 2013 by ellie

science
1. Which of the following is TRUE regarding this situation: Solution A has a pH of 7.38, and Solution B has a pH of 7.42? a.Solution B is more acidic than Solution A b.The pH of Solution A falls within the homeostatic pH range for extracellular body fluids, but the pH of ...
January 28, 2013 by a

Pages: <<Prev | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | Next>>

Search
Members