Saturday
August 30, 2014

Search: ethane

Number of results: 148

Sepration chemistry
Mixture of A,B,C if the mole fraction of A is 30 and B is 35 Volume percent calculate the mass and mole fraction of each compnant. given that A is methane, B is ethane, C is propane. use SI unit and English unit.
September 16, 2013 by NONO

Chemistry
Three gases (8.00 of methane,CH4 , 18.0 of ethane,C2H6 , and an unknown amount of propane,C3H8 ) were added to the same 10.0-L container. At 23.0 degress celsius , the total pressure in the container is 3.90 atm. Calculate the partial pressure of each gas in the container.
September 23, 2008 by Sarah

chemistry
A 1-L flask is filled with 1.45 g of argon at 25 degrees C. A sample of ethane vapor is added to the same flask until the total pressure is 1.35 atm. What is the partial pressure of argon in the flask?
December 2, 2010 by Liz

Chemistry
What is the partial pressure (in mm Hg) of neon in a 4.00 L vessel that contains 0.442 mol of methane, 0.414 mol of ethane, and 0.859 mol of neon at a total pressure of 943 mm Hg?
April 22, 2010 by Camarra

Chemistry
A 1L flask is filled with 1.25 g of argon at 25 degrees celcium. A sample of ethane vapor is added to the same flask until the total pressure is 1.45 atm. What is the partial pressure of argon in the flask?
October 5, 2010 by Karen

chemistry
A 1-L flask is filled with 1.25g of argon at 25C . A sample of ethane vapor is added to the same flask until the total pressure is 1.45amt .What is the partial pressure of argon, Par, in the flask?
October 3, 2009 by Monica

Chemistry
A mixture of ethane and ethene occupied 35.5 L at 1.000 bar and 405 K. This mixture reacted completely with 110.3 g of O2 to produce CO2 and H2O. What was the composition of the original mixture? Assume ideal gas behavior Im pretty sure i use dalton's law of partial pressures ...
September 19, 2012 by Drew

chem-- delta H
In your search for fuel to use after the reserves of gasoline dry up, you decided to analyze different compounds (2 hydrocarbons & an alcohol) by combustion. You independently combust methane (CH4), ethane (CH3CH3), and ethanol (CH3CH2OH) at 298 K and 1 atm. What is teh delta ...
October 23, 2013 by Emma

chemistry
when a 8.77g mixture of methane, and ethane is burned in oxygen at constant pressure, 476.6kJ of heat is liberated. What is the percentage by mass of CH4 in the mixture? The standard enthalpies of combustion for CH4 and C2H6 are -890.3kJ/mol and -1569.7kJ/mol, respectively.
November 22, 2010 by Anonymous

Chemistry
How many moles of hydrogen gas are required to react completely with 807 L of ethylene (C2H4) according to the following reaction at 0oC and 1 atm? hydrogen (g) + ethylene (C2H4) (g)---> ethane (C2H6) (g) Should I use the ideal gas law here?
April 25, 2012 by Mohamed

chemistry
a mixture of methane and ethane is stored in a container at 294 mmHg. The gases are burned in air to form co2 and h2o. if the pressure of co2 is 357 mmhg measured at the same temperature and volume as the original mixture, calculate the mole fraction of the gases.
December 4, 2010 by maggie

Chemistry
Organic hydrogenation reactions, in which H2 and an "unsaturated" organic compound combine, are used in the food, fuel, and polymer industries. In the simplest case, ethene (C2H4) and H2 form ethane (C2H6). If 124 kJ is given off per mole of C2H4 reacting, how much heat is ...
October 19, 2010 by Jo

Chemistry
Organic hydrogenation reactions, in which H2 and an "unsaturated" organic compound combine, are used in the food, fuel, and polymer industries. In the simplest case, ethene (C2H4) and H2 form ethane (C2H6). If 124 kJ is given off per mole of C2H4 reacting, how much heat is ...
October 22, 2010 by HELP !

chemistry
When a 6.79-g mixture of methane, CH4, and ethane, C2H6, is burned in oxygen at constant pressure, 369 kJ of heat is liberated. What is the percentage by mass of CH4 in the mixture? The standard enthalpies of combustion for CH4 and C2H6 are -890.3 kJ mol-1 and -1569.7 kJ mol-1...
March 1, 2014 by abby

chem 211
Organic hydrogenation reactions, in which H2 and an "unsaturated" organic compound combine, are used in the food, fuel, and polymer industries. In the simplest case, ethene (C2H4) and H2 form ethane (C2H6). If 144 kJ is given off per mole of C2H4 reacting, how much heat is ...
October 18, 2013 by beti

chemistry
What is the major difference between the two-dimensional and three- dimensional models of ethane and methane? When might you choose to use a two-dimensional model rather than a three-dimensional model when representing one of the molecules?
September 30, 2013 by Jessica

Chem
Superscript 15 How many moles of Pb is 9.3 X 1015 atoms of pb? 1 mol of Pb atoms will contain 6.02 x 10^23 atoms of Pb. So 9.3 x 10^15 atoms x (1 mol/6.02 x 10^23 atoms) = ? note how the unit "atoms" cancel leaving mol and that is the unit we want. thanks What is the molar ...
February 6, 2007 by Chris

CHEMISTRY
A 8.90-g sample of ethane, C2H6, is mixed with 18.8 atm of O2 (an excess) in a 1.50 L combustion chamber at 130.0C. The combustion reaction to CO2 and H2O is initiated and the vessel is cooled back to 130.0C. What is the final pressure in the combustion chamber assuming the ...
January 17, 2008 by Matt

Chemistry
a mixture of methane CH4 and ethane C2H6 is stored in a container at 294 mmHg. The gases are burned in air to form CO2 and H2O. If the pressure of CO2 is 346mmHg at the same temp and volume as the original mixture, calculate the ratio of moles of CO2 produced to moles of the ...
March 29, 2011 by Carolyn

Chemistry
a mixture of methane CH4 and ethane C2H6 is stored in a container at 294 mmHg. The gases are burned in air to form CO2 and H2O. If the pressure of CO2 is 346mmHg at the same temp and volume as the original mixture, calculate the ratio of moles of CO2 produced to moles of the ...
March 29, 2011 by Carolyn

chemistry
Given one of the starting materials and end product for each of the following reactions, show all reactants, reaction conditions in brackets (where known) and products. sorry i know this question has been posted already, but i need help. could you explain to me how to do them...
May 2, 2008 by John

Chemistry 30
In addition to alkanes, cracking reactions may also involve alkenes, alkynes and aromatics. For each of the following reactions, draw a structural formula equation. Include all reactants and products: a) but-1-ene --> ethyne + ethane b) 3-methylheptane --> but-2-ene + ...
January 2, 2013 by Iris

chem/plz/check work studying for a final
what is the volume occupied by 16.0g ethane gas (C2H6) at 720 Torr and 18C? V=nRT/P conversion of mol: 16.0g C2H6 X 1mol C2H6/30.07g C2H6= .53mol C2H6 V= .53 mol(0.0821 L*atm/mol*K)(291)K / 720 Torr (1 atm/760Torr) V= 13.5 L
December 16, 2010 by julia

chem/plz/check work studying for a final
what is the volume occupied by 16.0g ethane gas (C2H6) at 720 Torr and 18C? V=nRT/P conversion of mol: 16.0g C2H6 X 1mol C2H6/30.07g C2H6= .53mol C2H6 V= .53 mol(0.0821 L*atm/mol*K)(291)K / 720 Torr (1 atm/760Torr) V= 13.5 L
December 16, 2010 by julia

chemistry
A 79.9-L sample of a gaseous hydrocarbon, measured at 1.00 atm pressure and 25.0C, is burned in excess oxygen, liberating 4.24 10^3 kJ of heat at constant pressure. What is the identity of the hydrocarbon? (R = 0.0821 L atm/(K mol)) Substance Hf (kJ/mol) CO2(g) 393.5 ...
March 30, 2011 by chemistry

science/ chemistry
Ethane (C2H6) is one of the many products of combustion of iso-octane, an important component of petrol. After release into the atmosphere, it is attacked by the hydroxyl radical, HO, leading to its oxidation in the cycle of reactions when in a NOx-rich environment. Assuming ...
September 14, 2008 by Nicolas

ap chemistry
what does H2 + CH2 form? (what product?) What is CH2? There is a (CH)2 but I don't know of a CH2. Yes, I meant to ask: What product is formed by this reaction: H2 + (CH)2 My original answer is gone but I will repost. (CH)2 is HCtriplebondCH which is acetylene. H2 gas adds ...
October 29, 2006 by sara

Chemistry
Given the reaction 2C2H6 + 7O2 → 4CO2 + 6H2O ∆H = -1416 kJ/mol C2H6 a. How many liters of Carbon Dioxide would be produced if 16.00 L of ethane, (C2H6), were burnt (all at STP)? b. How many liters of water vapor would also be produced? c. How many liters of Oxygen ...
December 16, 2012 by Shenette

chemistry
For the combustion of ethane, beginning with 2.6 mol of CH3CH3, 2CH3CH3(g) + 7O2(g) → 4CO2(g) + 6H2O(g) a. how many moles of O2 are required to completely consume the CH3CH3? 9.1 moles b. how many moles of CO2 are obtained when the CH3CH3 is completely combusted? 5.2 ...
February 13, 2012 by krystal

Chemistry
A mixture of methane (CH4) and ethane (C2H6) of mass 13.43g is completely burned in oxygen. If the total mass of CO2 and H2O produced is 64.84 g, calculate the fraction of CH4 in the mixture. CH4 + C2H6 arrow CO2 + H2O 13.43g 64.84g Would I do 13.43g/16.04g CH4 ?
August 27, 2010 by Amy~

chemistry
The formulas for ethane, ethene and ethyne are C2H6, C2H4, and C2H2 respectively. Rank this chemicals 1,2,3 (highest)in terms of strength of IMF and explain the structures of the three molecules. I rank these three based on the bond length so I got C2H2, C2H4, C2H6. I know the...
October 5, 2012 by Lea

chemistry
what are some examples of covalent bonds and what are some examples of ionic bonds? Electrons are shared in covalent bonds. Electrons are exchanged in ionic bonds. Typical ionic compounds are NaCl, MgCl2, LiI, etc. Typical covalent compounds are CH4, methane; C2H6, ethane; ...
January 29, 2007 by Leeann

Chemistry
Acetylene, C2H2, can be converted to ethane, C2H6, by a process known as hydrogenation. The reaction is: C2H2(g) + 2H2(g) === C2H6(g) Given the following, what is the Kp for the reaction? C2H2(g): 209.2 ΔG˚f (kJ/mol) H2(g): 0 ΔG˚f (kJ/mol) C2H6(g): -32.89...
March 31, 2013 by Ezra

Chemistry
1.) How many grams of 2-propanol are expected from the complete reaction of 672 g of propene? 2.)How many moles of propane are expected from the complete reaction of 82.8 g of propene? 3.)How many grams of propane are expected from the complete reaction of 101 g of propene? 4...
April 5, 2007 by Kira

Chemistry
As I read it, the question provides you with a word description of the production of diesel fuel, gasoline, lighter gases such as ethane and propane, as well as some of the refinery operations such as cracking. Your job is to take this word description and write an equation ...
April 30, 2007 by DrBob222

Chemistry
Hi, this is a reply to the question I asked earlier. I asked about the classification and functional group of an organic compound. It has bonds between H-C-C-H. Off of each Carbon is single bonds of Hydrogen above and below. making a total of 6 Hydrogens and two carbons. They ...
May 3, 2010 by Julia

Chemistry Urgent
1) 30cm3 of methane and ethane mixed with 100cm3 of O2 at RTP. Explosion occurs, on cooling 61.5cm3 remained. Find the percentage by volume of each gas in the mixture 2)32cm3 of a mix of CO2, CH4 and H2 mix with 50cm3 of O2 and exploded after cooling to RTP, volume noted is ...
February 10, 2014 by Ava

science
How many times did Earth orbit the sun between 140 CE and 1543 , how do you figure this up???? If you know how many years that is, the earth orbits the sun once a year. I hope this helps. Thanks for asking. How many years is 140 Ce to 1543 ?? We need to know 10 different kinds...
September 5, 2006 by Charlotte

College Chemistry
1. What is the change in internal energy (in J) of a system that absorbs 0.677 kJ of heat from its surroundings and has 0.438 kcal of work done on it? 2. A 30.5 g sample of an alloy at 94.0C is placed into 48.7 g water at 20.3C in an insulated coffee cup. The heat capacity ...
October 20, 2010 by Nevaeh

Chemistry
use the table below to calculate ΔHo reaction: Standard Enthalpies of Formation, ΔH˚fٍ at 298 K Substance - Formula - ΔH˚(kj/mol) Acetylene C2H2(g) 226.7 Ammonia NH3(g) -46.19 Benzene C6H6(l) 49.04 Calcium Carbonate CaCO2(s) -1027.1 Calcium ...
February 8, 2008 by Sam

Chem Help!
I really need help for my homework on how to write the balanced equation for the following reactions. 1) Sodium reacts with iron(lll)oxide to produce sodium oxide and iron. Type of reaction: Balanced Equation: 2) Hydrogen bromide forms from hydrogen and bromine. Type of ...
April 8, 2008 by Lisa

Chemistry
I have realized I don't understand Avagado's number at all My book shows me this diagram instead of just providing a simple formulas that makes no sense at all here is what I have made sense of so far (6.022 x 10^23 atoms/mol)(mass of element) = molecular mass were molecular ...
July 3, 2010 by Kate

AP Chem
use simple structure and bonding models to account for each of the following: A. the bond length between the two carbon atoms is shorter in C2h4 then in c2h6. B.the bond lengths in SO3 are all identical and are shorter than a sufur oxygen single bond. C. the N-O bonds in the ...
January 9, 2007 by Justyna

chemistry: please check answers.
1. How many valence electrons does a carbon atom have? A) 1 B) 2 C) 3 D) 4<<my answer 2. How many double covalent bonds are in an alkane? A) 0<<my answer B) 1 C) 2 D) 3 3. What is the general formula for a straight-chain alkane? A) CnHn B) CnHn+2 C) CnH2n D) CnH2n+...
April 30, 2013 by Anonymous

science - chemistry pH problems
Here is the hint I received on how to solve those tough pH problems I posted earlier: Both of these can be solved using the H-H and doing the algebra. The math itself is hard to type out, but in Q1 the values of [NaA] and [HA] are 0.04805 and 0.15195. In Q2 you will have to ...
October 11, 2006 by ajones51

science - chemistry
Hi everyone, I have been trying to solve these two questions but am having trouble doing so and was wondering if someone could help me out. (1) You wish to make a 0.200 mol/L PIPES buffer (PIPES: 1,4-Piperazine-N,N'-bis(2-ethane-sulfonic acid), C8H18N2O6S2, pKa = 6.80) at a pH...
October 8, 2006 by ajones51

chemistry
Hello, a few questions: Thanks so much! 1. The heat capacities of titanium and water are 0.522 J g-1 K-1 and 4.184 J g-1 K-1, respectively. What is the final temperature of the titanium-water mixture if a 175.0-g sample of titanium, initially at 90.0oC, is added to 50.0 g of ...
March 1, 2014 by abby

Chem
I have a chemistry test that I need help with. My answers have stars by them Can someone please help me with the answers to this test??? Part 1 Matter as Energy & Structure 1. When a pair of electrons is shared between two atoms, a covalent bond is said to have formed. Most...
July 20, 2011 by Winona

Pages: <<Prev | 1 | 2

Search
Members