Friday
July 29, 2016

Search: describe how you would prepare 500ml of 0.2m (NaOH) solution from 150ml of 4.0M stock solution of (NaOH). Calculate the dilution factor

Number of results: 101,237

Chemistry
What volume of a 15.0% by mass NaOH solution, which has a density of 1.116 g/mL, should be used to make 4.40 L of an NaOH solution with a pH of 10.5?
March 17, 2013 by Emma

Chemistry
A 50mL solution of NaOH is neutralized by adding 37.5 mL of 0.045 M HCL. What was the original concentration of the NaOH solution?
September 29, 2013 by Julie

Chem.
To standardize a solution of NaOH, one uses a primary standard called potassium hydrogen phthalate (KHP). It is a monoprotic acid. It has a molar mass of 204.33g/mol. Suppose you weigh out .556g of KHP and dissolve it in water. It requires 14.48 mL of NaOH to reach the ...
March 17, 2014 by Anonymous!

Chemistry
What weight of NaOH would be required to prepare 3000ml of a 2.5M solution?
April 21, 2009 by Jessi

chemistry
Why is the 6M NaOH solution diluted before titrating the vinegar sample? How might your results be affected if you used the 6M solution rather than the 0.3M NaOH?
May 4, 2011 by jan

Chemistry
You are given 21.0 mL of a 5.00% solution of NaOH. The solution has a density of 1.02 g/mL. What volume of 0.0895M H2SO4 will you need to completely and exactly react (neutralize) the NaOH?
October 22, 2014 by Kelly

Acids and Bases
NaOH was added to 1.0 L of HI(aq) 0.40 M. Calculate H3O in the solution after the addition of .14 mol of NaOH. Calculate H3O in the solution after the addition of 0.91 mol of NaOH.
March 23, 2011 by Kaitlyn

chemistry
to what volume should you dilute 0.100 L of a 15M NaOH solution to obtain a 1.0 M NaOH solution?
March 26, 2011 by eugene

chemistry
to what volume should you dilute 0.100L of a 15M NaOH solution to obtain a 1.0M NaOH solution
July 10, 2013 by veronica

chem
how to find mass of aspirin if I used 0.2845g of the powder(crushed apririn) with 1mL of 6.0 mol/L of Nacl? Does the dilution(the above chemicals are diluted in a 500mL volumetric flask) matter ,and does adding the HCL/Fe^3+ stock solution in the end matter (1.00 mL of the the...
April 23, 2015 by linda

Chemistry
When 2.25 g of sodium hydroxide (NaOH) was dissolved in 150.00 g of water a value of 11.00oC was obtained for ΔT. 1. Calculate the molarity of the sodium hydroxide solution. 2. Calculate the value (calories) for the heat of solution of 2.25 g of NaOH. 3. Calculate the ...
October 20, 2014 by Kales

Chemistry
What is the molarity of a solution containing 10.g of NaOH in 700.mL of NaOH solution? Express your answer to two significant figures and include the appropriate units.
April 7, 2015 by Chan

chemistry
how do you solve this problem?? how much NaOH (in grams) is needed to prepare 546mL of solution. What is the pOH of the solution?
July 4, 2010 by jin

chemistry
11.During an acid-base titration, 25 mL of NaOH 0.2 M were required to neutralize 20 mL of HCl. Calculate the pH of the solution for each of the following: 12.Before the titration. 13.After adding 24.9 mL of NaOH. 14.At the equivalence point. 15.After adding 25.1 mL of NaOH. ...
May 8, 2013 by Tina

Chem
Calculate the volume of .300 M NaOH needed to prepare a pH=3.50 buffer with 250ml of .075M HF solution. pKa (HF) = 3.15
February 11, 2012 by Will

chemistry
1. When performing this experiment, a student mistakenly used impure KHP to standardize the NaOH solution. If the impurity is neither acidic nor basic, will the percent by mass of acetic acid in the vinegar solution determined by the student be too high or too low? Justify ...
March 23, 2014 by anonymous

Biology
Describe how you would prepare 10 mL each of 2 M, 1.5 M, and 1 M NaCl solutions from a 2 M stock NaCl solution. Describe your actions–exactly what you would do –step-by-step–when preparing this solution. Also show all calculations. Be sure all amounts include units of ...
June 5, 2013 by Maria

chemistry
what is the molarity of a solution prepared by dissolving 2.24 grams of NaOH in enough deionized water to obtain 500.0ml of solution?The molar mass of NaOH is 40.0g
October 30, 2011 by denis

chemistry
what is the molarity of a solution prepared by dissolving 2.24 grams of NaOH in enough deionized water to obtain 500.0ml of solution?The molar mass of NaOH is 40.0g
October 31, 2011 by denis

chemistry
A stock solution was prepared by dissolving exactly 0.4000 g of pure ASA (180.16 g/mol) in 10.00 mL of NaOH and heating the solution to a gentle boil. After cooling to room temperature, the solution was poured into a 250-mL volumetric flask and diluted to the mark with DI ...
January 28, 2010 by Tasha

Chemistry
A solution is prepared by dissolving of pure HC2H3O2 and of NaC2H3O2 in of solution (the final volume). (a) What is the pH of the solution? (b) What would the pH of the solution be if of 0.250 M NaOH were added? (c) What would the pH be if of 0.40 M HCl were added to the ...
February 22, 2015 by Liam

chemistry
what is the new concentration of a NaOH solution that was made from 75 mL of a 5.5 M NaOH solution and diluted it to 250 mL?
June 2, 2011 by lexi

Chemistry
What is Mass % of an aqueous NaOH solution in which molality of NaOH is 16.7m? Density of the solution is 1.4339g/ml
January 13, 2013 by Janet

Chemistry
suppose you added 26.0 ml of 0.01 M NaOH to the solution, what is the molarity of excess NaOH in the mixture? what is the ph of this solution?
November 19, 2014 by Mollie

Chemistry
1.The Volume of oxygen required for the complete combustion of 500ML of ethyne at STP..A)2.00ML B)1.25 C)1.71 D)1.00 2.A Chemical Engineer finds that 250ml CuSO4 reacts with excess NaOH to create 2.37g of precipitate.Calculate the Concentration of copper(II) Sulphate solution...
June 4, 2009 by Alex

chemistry- some help plzz totally lost on this one
Imagine that you are in chemistry lab and need to make 1.00 L of a solution with a pH of 2.70. You have in front of you * 100 mL of 7.00×10−2 M HCl * 100 mL of 5.00×10−2 M NaOH, and * plenty of distilled water. You start to add HCl to a beaker of water when someone...
July 13, 2009 by DrFunk

Chemistry
If you dilute 14.0mL of the stock solution to a final volume of 0.350L , what will be the concentration of the diluted solution? Before it, there was a question: How many milliliters of a stock solution of 5.60 M HNO3 would you have to use to prepare 0.190L of 0.450 M HNO3? ...
September 27, 2014 by Danielle

Chem I
Calculate the concentrations of hydronium and hydroxide ions in a solution prepared by dissolving 0.345g of solid NaOH in enough water to make 225mL of solution. Also calculate the pH and pOH of the solution.
November 15, 2010 by Natalea

Clinical Calculations
What weight of NaOH would be required to prepare 3000 ml of a 2.5M solution?
November 8, 2009 by Tamaka

chemistry
For an experiment, a student needs 1L each of 2M NaOH and 2 M KCl solutions. The NaOH will be prepared from a 12M stock solution, whereas the KCl will be prepared from dry, powder,KCl. Describe the process by which each of the solutions can be prepared. Include: Mention of ...
May 22, 2010 by baby_doll321

chemistry
Calculate the Molarity of the unknown acid if 25.0 mL of the acid reacts with 17.50 mL of 0.14 M NaOH solution. Assume that NaOH and acid react in 1:! ratio. Show your work. (Hint: Find the moles of NaOH from the given molarity and volume. mols of NaOH = mols of acid. Knowing ...
March 16, 2016 by shosho

chemistry
A buffer solution is prepared by mixing 99.0 mL of 0.450 M HF and 55.0 mL of 1.15 M NaF. Determine the pH of the solution after the addition of 0.01 moles NaOH (assume there is no change in volume when the NaOH is added).
March 1, 2014 by Hayla

Chemistry
How do I solve these problems You have 2000. g of aqueous NaOH solution. The percent by mass of the solute is 4.25%. How many grams of NaOH are in the solution? If you have 100.0 mL of a 25.0% aqueous solution of ethanol, what volumes of ethanol and water are in the solution?
October 4, 2014 by Lucy

chemistry
Draw the tritration curve for the neutralization of a 100ml sample of 1M solution of HCl with a .6M solution of Naoh point 1: 2 ml NaOH edded point 2: 40 ml NoOH ADDED POINT 3: EQUIVALENCE POINT 4: 80 ML NaOH added
April 3, 2011 by sam

Chemistry
Describe how to prepare an aqueous 100 mL stock solution of 2 M sodium chloride solution.
March 22, 2011 by Brittany

chemistry
how do i calculate the NaOH molarity from a titration of KHP and NaOH after preparing KHP to standardise NaOH. KHP mass was 2.0378g dissoveld in distilled water to fill up a 100ml volumetric flask and only 10ml of this solution was used to in titration
March 22, 2013 by k

Chem
Please tell me if these are right! 1.How many milliliters of 0.215 M NaOH solution are needed to completely neutralize 2.50 ml of 0.825 M H2SO4 solution? I got 19.2 ml 2. A 10.0-ml sample of vinegar which is an aqueous solution of acetic acid HC2G3O2 requires 16.5 ml of 0.500M...
December 6, 2010 by Jessica

chemistry
Calculate the pH from the addition of 10 mL of a 0.10 M NaOH solution to 90 mL of 0.10 M HCl. okay so i understand how to do most of it but i get messed up at one part.. so i made my equation: NaOH + HCl -> H2O + NaCl (strong base, strong acid= complete dissociation) so net...
November 8, 2011 by BOB PLEASE HELP!:)

Chemistry
Phosphate standards used to generate the calibration curve are usually made by first preparing a stock solution of known concentration, then diluting it to the required concentration. First prepare a stock solution that is 1.00 x 10-2 M in phosphate ion. How many g of Na3PO4 ...
September 6, 2010 by Khaalid

AP CHEMISTRY
Calculate [OH-] and pH for the following strong base solution; a solution formed by mixing 10.0 mL of 0.011 M Ba(OH)2 with 28.0 mL of 7.4 10-3 M NaOH working and answer would be appreciated
February 18, 2012 by MARY

math
50gm of a sample of ca(oh)s is dissolved in 50ml of 0.5N hcl solution. The excess of hcl was titrated with 0.3N -naoh. The volume of naoh used was 20cc. Calculate of naoh used was 20cc. Calculate % purity ca(oh)2 Who help me step by step
December 22, 2013 by Fai

institute of health sciences
Chemistry A) determine the mass of sodium hydroxide needed to prepare 100ml of 0.5M standard solution B) describe the procedure used to prepare the standard solution C) use the 100ml stock solution of 0.5M sodium hydroxide to neutralize H2SO4 by volumetric analysis I) ...
November 12, 2015 by trendy

Chemistry
You have 100 mL of a 0.450 M sulfuric acid solution, but you now need to add NaOH to make the solution basic. How much NaOH ( in grams) will you need to add to make the solution have a pH of 13.0? The units are grams of NaOH.
March 29, 2015 by Tessa Lehan

Chemistry
A 0.1873 g sample of a pure, solid acid, H2X was dissolved in water and titrated with 0.1052 M NaOH solution. The balanced equation for the neutralization reaction occurring is H2X(aq) + 2NaOH(aq) ¨ Na2X(aq) + 2H2O(l) If the molar mass of H2X is 85.00 g/mol, calculate the ...
May 11, 2011 by Lauren

Chemistry
An impure sample of (COOH)2 · 2 H2O that has a mass of 2.9 g was dissolved in water and titrated with standard NaOH solution. The titration required 32.4 mL of 0.144 mo- lar NaOH solution. Calculate the percent (COOH)2 · 2 H2O in the sample.
April 1, 2016 by Bella

chemistry
530 mL solution 10% HCl has been spilt onto the bench. It cannot be diluted or washed away. How much of the granular NaOH from the container seen in a must be used to neutralise the acid? [Using NaOH: MM = 40 g/mol] 1. I have NaOH + HCl --> NaCl + H2O. 10% HCI in a 530ml ...
October 2, 2014 by Anonymous

chemistry
what mass of NaOH would be dissolved in 1dm3 of water to obtain 0.5 moles of the NaOH solution
November 3, 2009 by osah felix

Chemistry
A solution of concentrated NaOH is 16.4 M. If the density of the solution is 1.43 g/mL what is the percent by mass NaOH?
May 12, 2016 by Olivia

chemistry
How would you make a 1.0 L of 0.10M NaOH solution of 10.0M NaOH?
April 6, 2011 by Marilyn

Chemistry
You are asked to prepare 500. mL of a 0.150 M acetate buffer at pH 5.00 using only pure acetic acid, 3.00 M NaOH, and water. Calculate the quantities needed for each of the following steps in the buffer preparation. 1. Add acetic acid to ~400 mL of water in a 500 mL beaker. ...
September 28, 2012 by Kw1h

College Chemistry
Calculate the Molarity of the solution that contains 4.00 grams of NaOH in a total volume of 1500.0 mL. [Molar Mass NaOH = 40.00g, 1 Liter = 1000 mL]
November 5, 2010 by stacy

chemistry
calculate the volume of mL of a 1.420 M NaOH solution required to titrate the following solution. 25.00 mL of a 1.500 M H3PO4 solution
October 11, 2011 by TROUBLED

Chemistry
1.0L of aqueous solution in which [H2CO3]=[HCO3^-]=0.10M and has [H^+]=4.2E-7. What is the concentration of [H^+] ofter 0.005 mole of NaOH has been added? H2CO3 ==> H^+ + HCO3^- k1 = (H^+)(HCO3^-)/(H2CO3) I don't know if you are supposed to calculate or to look up k1. ...
August 7, 2007 by Vic

chem
An impure sample of (COOH)2 ·2 H2O that has a mass of 3.4 g was dissolved in water and titrated with standard NaOH solution. The titration required 42.7 mL of 0.156 molar NaOH solution. Calculate the percent (COOH)2 · 2 H2O in the sample. Answer in units of %.
April 3, 2016 by lois

chem
Which of the following pairs of substances, when mixed in any proportion you wish, can be used to prepare a buffer solution? (Select all that apply.) NaCN and HCN NaCN and NaOH HCN and NaOH HCl and NaCN HCl and NaOH I thought it was the middle three because each either has a ...
April 10, 2011 by Rebekah

chemistry
Explain how you would prepare this solution from powdered reagents and whatever glassware you needed: 3.0 L of 1.3 M NaOH
February 12, 2012 by Laura

chemistry
Explain how you would prepare this solution from powdered reagents and whatever glassware you needed: 3.0 L of 1.3 M NaOH
February 12, 2012 by Laura

chemistry
Explain how you would prepare this solution from powdered reagents and whatever glassware you needed: 3.0 L of 1.3 M NaOH
February 12, 2012 by Laura

chemistry
Explain how you would prepare this solution from powdered reagents and whatever glassware you needed: 3.0 L of 1.3 M NaOH
February 12, 2012 by Laura

Chemistry
6. Explain how you would prepare this solution from powdered reagents and whatever glassware you needed: 3.0 L of 1.3 M NaOH
November 27, 2013 by Gregory

Chemistry
A student was given 100mL of HCL solution in a 250mL beaker and told that the HCL was 0.11M. The student was also given phenolphthalein indicator and 250 ML of 0.1234 M NaOH. The student first filled a buret with NaOH solution. The student then placed an appropriate volume of ...
November 21, 2013 by Lenny

Chemistry
You have 475 mL of an 0.47 M acetic acid solution. What volume (V) of 1.10 M NaOH solution must you add in order to prepare an acetate buffer of pH = 5.00?
January 19, 2013 by Mark

chem-acid base titrations
If 20.0mL of .2019M HCI requires 39.63mL of a NaOH solution for complete neutralization, what is the concentration of the NaOH solution? how many significant figures are justified in the answer?
April 7, 2008 by natash

chem
Which of the following pairs of substances, when mixed in any proportion you wish, can be used to prepare a buffer solution? (Select all that apply.) NaCN and HCN NaCN and NaOH HCN and NaOH HCl and NaCN HCl and NaOH and Which of the following gives a buffer solution when equal...
April 12, 2011 by Rebekah

chemistry
When 25.0 mL of 1.0 M H2SO4 is added to 50.0 mL of 1.0 M NaOH at 25.0 °C in a calorimeter, the temperature of the aqueous solution increases to 33.9 °C. Assuming the specific heat of the solution is 4.18 J/(g·°C), that its density is 1.00 g/mL, and that the calorimeter itself ...
March 14, 2013 by nobody

Chemistry
1.) Watch the animation, and observe the titration process using a standard 0.100 M sodium hydroxide solution to titrate 50.0 mL of a 0.100 M hydrochloric acid solution. Identify which of the following statements regarding acid-base titrations are correct Drag items A-F to: ...
November 19, 2015 by LuigiR

please help analytical chemistry
50 ml of a .1103M solution of formic acid is titrated with a .2511M NaOH. a) What is the pH before and NaOH is added? b) How many mL of NaOH solution must be added to reach the equivalence pt? c) what is the pH at the equivalence pt of the titration? d) If the titration is ...
April 8, 2013 by Lana

chemistry
50 ml of a .1103M solution of formic acid is titrated with a .2511M NaOH. a) What is the pH before and NaOH is added? b) How many mL of NaOH solution must be added to reach the equivalence pt? c) what is the pH at the equivalence pt of the titration? d) If the titration is ...
April 7, 2013 by Jessica

science
A 0.1 M NaOH solution is used for holder 50, or ml of a 0.100 M solution of acetic acid. Calculate the pH of the solution after the addition of 50.0 ml of sodium hydroxide
May 2, 2016 by Anonymous

College Chem
I need to be able to describe how to prepare 20 mL of a 0.0050 M KIO3 solution from a stock solution with a concentration of 0.020 M.
October 3, 2010 by Kelli

Clinical chemistry
Describe how you can prepare 0.25 molar solution of sodium hydroxide from an 80 percent stock solution in a 500mls beaker
November 9, 2014 by Lowicy

CHEM 136
A sample of 25.00 mL of 0.100 M HNO2(in a flask) is titrated with 0.150 M of NaOH solution at 25 degrees. 1) calculate the volume(Ve) of the NaOH solution needed to completely neutralize the acid in the flask. 2)calculate the pH for (a)the initial acid solution in the flask (b...
November 23, 2010 by Jefferson

chem help w/ Lab
Weight of the mustard package Sample: 3.02 (g) Weight of the mustard package Solution: 33.3 (g) Trial #1 Trial #2 Trial #3 Weight of Mustard Package Solution Delivered (g) : 1.09 .948 .909 Weight of NaOH Solution Delivered (g) : .354 .304 .269 Concentration of NaOH : 7.48e-3 (...
October 17, 2012 by Den

Chemistry
Hello, I need help with calculations for lab. I prepared excess NaOH and HCL solutions (unknown conc., ~0.1M). Then I standardized my NaOH solution by titrating known amounts of KHP (Potassium hydrogen phthalate)with it in the presence of phenolphthalein (indicator turns pink ...
September 20, 2009 by Pavel

ap chemistry!! help!!
some solutes have large heats of solution, and care should be taken in preparing solutions of these substances. The heat evolved when sodium hydroxide dissolves is 44.5 KJ/mol. What is the final temperature of the water, originally at 20.0 degrees Celcius. used to prepare 500....
January 9, 2007 by john

Science
You have a stock solution of 3.5M glucose. You need a working solution of 0.5M glucose in a volume of 400ml. Explain how you make the solution. Also what is the concentration of the dilution solution?
October 15, 2012 by Helper

Chemistry105
1. (a) What is the molarity of a solution prepared by dissolving 4.315 g of NaOH in water to exactly 100 mL in a graduated flask? (Na = 23.0; O = 16.0' H = 1.0 amu).    (b) What volume of the above solution is required to neutralize exactly 25.00 mL of 0.1500 M HCl solution...
December 4, 2012 by Mira

chemistry
Lab: Determining Ka of Acetic Acid Purpose: The purpose of this experiment is to determine the molar concentration of a sample of acetic acid and to calculate its Ka. Materials: phenolphthalein 125 mL Erlenmeyer flask 25 mL pipet and bulb pH metre acetic acid solution burette ...
April 8, 2008 by Nick

chemistry
How do I prepare 2 L 0.1 M Hydrochloric acid from 6 M HCl ? Also how do I prepare .05 M NaOH solution from pellets? Thanks
May 4, 2011 by rosie

Chem
Using the standardized NaOH solution, the student weighs out 0.2550g of a solid unknown acid and finds that 28.50mL of the NaOH solution is required to reach an end point with the acid. Calculate the molar mass of the unknown acid, assuming the acid is diprotic.
April 25, 2014 by Jen

Chem
Using the standardized NaOH solution, the student weighs out 0.2550g of a solid unknown acid and finds that 28.50mL of the NaOH solution is required to reach an end point with the acid. Calculate the molar mass of the unknown acid, assuming the acid is diprotic.
April 25, 2014 by Jen

Chemistry
A 5.00-mL sample of an H3 PO4 solution of unknown concentration is titrated with a 0.1003 M NaOH solution. A volume of 6.55 mL of the NaOH solution was required to reach the endpoint. What is the concentration of the unknown H3 PO4 solution?
March 11, 2013 by Amee

CHEMISTRY
25cm^3 of a solution of NaOH required 28cm^3 of 1.0 mol dm^-3 H2SO4 to neutralise it. a)Write an equation for the reaction. b)How many moles of H2SO4 were needed? c)How many moles of NaOH were thus neutralised? d)How many moles of NaOH are there in 25cm^3 of solution?
October 20, 2013 by Ava

College-Chemistry
NaOH(s)+ H2SO4(aq)=Na2SO4(aq) + H2O(l) Consider the unbalanced equation above.A 0.900 g sample of impure NaOH was dissolved in water and required 37.0 mL of 0.145 M H2SO4 solution to react with the NaOH in the sample. What was the mass percent of NaOH in the sample?
February 26, 2010 by Tiffany

Chemistry
How would you prepare 1000.0ml of 0.600M NaOH solution starting from concentration of 1.000M
October 19, 2012 by Tasha

chemistry
How would you prepare 1000.0ml of 0.600M NaOH solution starting from concentration of 1.000M.
October 20, 2012 by Tasha

Chemistry
500.0mL of 0.220 mol/L HCl(aq) was added to a high quality insulated calorimeter containing 500.0mL of 0.200mol/L NaOH(aq).Both solutions had a density of 1.000g/mL & a specific heat of 4.184 J/g.K. The calorimeter had a heat capacity of 850.0 J/degree C. The temperature of ...
March 23, 2012 by Meenaakshi

Chemistry
A 25 mL sample of wine is found to have a concentration of acetic acid of 0.23 M. If this was titrated with a 0.16 M NaOH solution how many mL's of NaOH would be required?
November 27, 2010 by Susan

chemistry
If you made up a solution of NaOH by adding 0.010 mole of solid NaOH to 1.0 liter of distilled water, what would be the concentration of the OH-(aq)?
April 29, 2013 by carli

chem
how do you prepare a solution using the proper lab equipment(both from dry solid and a stock solution) i researched it but all i found was the definition for stock solution any help please!!
February 12, 2009 by lyne

Chemistry
What is the molarity of a NaOH solution if 21.3 mL of the NaOH solution is neutralized by 10.4 mL of 6.10 M H3PO4?
April 20, 2014 by taytay

pharmacy calculations
prepare 500 ml of a 1:5 solution using a 1:10 solution and a 1:4n solution. what quantities will be used of each stock solution to make the 1:5 solution?
August 3, 2012 by cleondra

Chemistry
During an acid-base titration, 25 mL of NaOH 0.2 M were required to neutralize 20 mL of HCl. Calculate the pH of the solution for each: a) Before titration b) After adding 24.9 mL of NaOH c) At equivalence pt d) After adding 25. 1 mL of NaOH e) The pH of the equivalence pt ...
May 10, 2014 by al

chemistry
We have two liters of a buffer solution that is 0.10 M in CH3COOH and 0.10 M in NaCH3COO. How many moles of solid NaOH are to be added to this solution to increase its pH by 5.0 percent? Assume no volume change due to the addition of solid NaOH. I have the starting pH and what...
April 15, 2010 by Bharg

Chemistry (repost)
Which of the following pairs of substances, when mixed in any proportion you wish, can be used to prepare a buffer solution? 1)NaCN and NaOH 2) HCl and NaOH 3) HCN and NaOH 4)HCl and NaCN 5) NaCN and HCN is the answer 1 and 5?? chem - DrBob222, Sunday, April 10, 2011 at 1:28am...
April 10, 2011 by Rachel

Chemistry
.01 mols of a weak acid is dissolved in .1 L of water. That solution is then reacted with .01 mols of NaOH. Would the resulting solution be acidic, basic, or neutral? Why? What reaction equations support the explanation? I think the answer is that the resulting solution would ...
February 12, 2014 by Anonymous

Chemistry
A solution is prepared by dissolving 25.0 g of pure HC2H3O2 and 25.0 g of NaC2H3O2 in 700 mL of solution (the final volume). (a) What is the pH of the solution? (b) What would the pH of the solution be if 65.0 mL of 0.650 M NaOH were added? (c) What would the pH be if 40.0 mL ...
February 21, 2015 by Dean

science
solubility product of Ca(OH)2at 25'C is 4.42*10^-5. A 500ml of saturatee solution of it is mixed with an equal volume of 0.4M NaOH .How muchb Ca(OH)2 PREcipited
April 14, 2016 by Bhupal Guragain

chemistry
A home swimming pool is disinfected by the daily addition of 0.50 gal (1 gal = 3.785 L) of a "chlorine" solution–NaOCl in NaOH(aq). To maintain the proper acidity in the pool, the NaOH(aq) in the "chlorine" solution must be neutralized. By experiment it is found that about 220...
October 9, 2012 by joe

Physical Sciences
I have a project practical investigation to do and I have no idea how to go about with it. The problem is: Calculate the mass of sodium hydroxide used to prepare a 0,5M NaOH solution in a 250ml volumetric flask. Determine the concentration of the acetic acid solution used (...
August 10, 2012 by Cindy

  1. Pages:
  2. <<Prev
  3. 1
  4. 2
  5. 3
  6. 4
  7. 5
  8. 6
  9. 7
  10. 8
  11. 9
  12. 10
  13. 11
  14. 12
  15. 13
  16. 14
  17. 15
  18. Next>>