Thursday
November 20, 2014

Search: chem lab (webwork)

Number of results: 7,951

chem lab (webwork)
What is the pH of the solution created by combining 1.80 mL of the 0.10 M NaOH(aq) with 8.00 mL of the 0.10 M HCl(aq)? with 8.00 mL of the 0.10 M HC2H3O2(aq)? mL NaOH pH wHCl pH wHC2H3O2 1.80 Complete the table below: What are the pH values if you take into account that the 8....
April 13, 2010 by anonymous

Chem Webwork
Complete the table below: What are the pH values if you take into account that the 8.00 mL of 0.10 M Acid was first diluted with 100 mL of water (like it will be in the experiment you perform in lab)? mL NaOH: 0.70 pH w/ HCl: 2.14 pH w/ HC2H3O2: ??? I got pH w/ HCl, but I can'...
April 25, 2011 by Michelle

chem lab (webwork)
Complete the table below: How much 0.10 M Base (in mL) is required to neutralize 8.00 mL of the 0.10 M acid? Base Acid Base Volume (mL) NaOH HCl NaOH HC2H3O2
April 13, 2010 by need help student

chem lab (webwork)
How much 0.10 M Base (in mL) is required to neutralize 8.00 mL of the 0.10 M acid? Base Acid Base Volume (mL) NaOH HCl NaOH HC2H3O2
April 13, 2010 by anonymous

chem lab (webwork)
What is the pH of the solution created by combining 1.80 mL of the 0.10 M NaOH(aq) with 8.00 mL of the 0.10 M HCl(aq)? with 8.00 mL of the 0.10 M HC2H3O2(aq)? mL NaOH pH wHCl pH wHC2H3O2 1.80 Complete the table below: What are the pH values if you take into account that the 8....
April 15, 2010 by anonymous

Lab in general
I just read my syllabus for lab and I am kind of shocked at what it says. I do know that I have to write out procedures of the lab in my nbk before coming to lab but I just read that it says "You will NOT be allowed to refer to you textbook/handout during the lab period" Is ...
September 3, 2007 by ~christina~

Chem Lab Help
I wanted to know if any one has done the Determination of ASA Content of Tablets Lab Report. I need help doing the post lab questions
December 4, 2012 by Latica

chem lab (webwork)
When a good indicator has been chosen, the pH at which the solution changes color is very close to the point of the titration. Complete the table below: If this "point" for a particular titration occurs at pH x, a good indicator for for the titration would be ______________. ...
April 13, 2010 by need help student

Chem Webwork UCI
Complete the table below: What is the pH of the solution created by combining 0.70 mL of the 0.10 M NaOH(aq) with 8.00 mL of the 0.10 M HCl(aq)? with 8.00 mL of the 0.10 M HC2H3O2(aq)? mL NaOH: 0.70 pH w/ HCl: 1.08 pH wHC2H3O2: 3.23 Complete the table below: What are the pH ...
April 25, 2011 by Michelle

chem lab (webwork)
Which of the following is NOT true of colligative properties? Colligative properties are... A. dependent on the mass of solute present. B. independent of the chemical identity of the solute. C. responsible for lowering the vapor pressure of a solution versus the vapor pressure...
April 3, 2010 by UCI studebt

Chem Webwork help
1. What is the pH when enough 0.10 M Base (in mL) is added to neutralize 8 mL of 0.10 M Acid? Complete the following table. NaOH HC2H3O2 2. What is the pH of the solution created by combining 2.60 mL of the 0.10 M NaOH(aq) with 8.00 mL of the 0.10 M HCl(aq)? with 8.00 mL of ...
July 12, 2010 by Sammy

chem webwork
A. Increasing halogen atom size. B. Decreasing acid strength. C. Shortening of the C-C bond. D. Increasing electronegativity. E. Higher dipole values going from F to Cl to Br. cant paste the spartan stuff... whats the answer?!?!?
July 12, 2010 by Anonymous

CHEMISTRY (WEBWORK)
What is the pH of the solution created by combining 1.20 mL of the 0.10 M NaOH(aq) with 8.00 mL of the 0.10 M HCl(aq)? with 8.00 mL of the 0.10 M HC2H3O2(aq)? mL NaOH pH w/ HCl pH w/ HC2H3O2 1.20 ? ? Complete the table below: What are the pH values if you take into account ...
July 12, 2010 by Anonymous

chem lab
My lab is on Comparison of the B-carotene content of raw and cooked carrots...if you use a single 5.0g piece of carrot, do you expect to extract more or less B-carotene than with the finely cut carrot sample? explain.
May 5, 2008 by natash

chem 121
We did a lab separating out the components of a mixture. One of the lab questions is "The weight of naphthalene was obtained by weighing the collected solid. Was this an accurate weight of the naphthalene present in the original sample?" I don't know how to answer this.
October 17, 2010 by Martha

chem lab
hi im doing a post lab sheet for chem class. and im having a little trouble. i have: temperature 12.6 C -> 285.6 K Time 816 sec but im supposed to find 1/T(K) it looks like my classmate did this: 12.6 x 285.6 = 3598.56 however they gave me the response to group 2 also: and ...
October 16, 2010 by chem

chem lab (webwork)
Which of the following is NOT true of colligative properties? Colligative properties are... A. dependent on the mass of solute present. B. independent of the chemical identity of the solute. C. responsible for lowering the vapor pressure of a solution versus the vapor pressure...
April 5, 2010 by UCI studebt

science(chem)
What is Zimmerman Reagent made of? (I know it is acidic b/c I was told after it burned a hole in my jeans) acid? You must mean Zimmermann-Reinhardt reagent (79 g MnSO4, 100 mL of concentrated H2SO4, and 200 mL of concentrated H3PO4, diluted to 1 L) Zimmerman reagent is equal ...
July 16, 2007 by christina

Chem Lab
I did a chem lab and have to figure out some stuff off of some data I found during the lab Weight of empty crucible and cover: 19.74 g Weight of crucible, cover and hydrated salt: 22.74 g Weight of crucible, cover and hydrated salt after 1st heating: 22.13 g Weight of crucible...
October 8, 2012 by Aliya

Chem Lab
I did a chem lab and have to figure out some stuff off of some data I found during the lab Weight of empty crucible and cover: 19.74 g Weight of crucible, cover and hydrated salt: 22.74 g Weight of crucible, cover and hydrated salt after 1st heating: 22.13 g Weight of crucible...
October 8, 2012 by Aliya

Chem Lab
I don't know how to obtain theoretical yield.
November 2, 2012 by Cris

science
help with the chem lab. the molecular of a volatile liquid.
November 29, 2007 by Bmt

Biology
I really need help with my science lab. I was sick when we did the lab on Thursday and Friday was a snowday so I did not get to get the observations off my peers. My teacher has allowed people one more day and I do not understand this Lab at all. If someone could help me write...
March 5, 2007 by Scott

Microbiology
How can lab practices and safety precautions help reduce hazards in a lab setting? How do you handle blood cultures and pathogenic strains in a lab to minimize contamination?
May 3, 2013 by Sara

Chem
I am doing a lab on enthaply of vaporization of water, I got everything else on the post lab but these two questions, please help. The deltaHvap data from the handbook reference vary with temp. 1) if your data were perfect, but deltaHvap is not constant, how would this show up...
February 13, 2013 by Please please helppppp!!!!!

Chemistry labs in highschool
I was curious to know whether it was standardized practice to have labs for chemistry classes in highschool. I personally have never had labs for chemistry in highschool. In my state we have the Regents. You may or may not have heard of this test, but the reason I mention it ...
August 23, 2007 by ~christina~

chem
help me i hev a lab You need to post a question with details about what yo don't understand.
March 21, 2007 by cool

basic chem lab question
what is the mass of a typical 50 ml glass beaker in grams
September 21, 2008 by al

chem help
im doing a graph for chem lab with excel. my classmate created a graph with these coordinates: X: 3.50 X10^-3 3.14X10^-3 3.28X10^-3 Y: -11.7 -8.96 -9.75 They got R2=0.998 but i got y = -3074.9x R = 0.6291 why is it wrong. im desperate please help! screen shot of my graph: ...
October 23, 2010 by ben

chem
I am having trouble coming up with a lab to determine the pka of salicyclic acid! help1
November 11, 2010 by jmf

Chem Lab
Why should the temperature be kept 48C during distillation? is it because of the melting point?
September 12, 2012 by Justin

Chem
A radiation lab orders 64uCi of P-32. After 42 days the activity of the sample is 8.0uCi. What is the life of P-32? Thanks
October 19, 2011 by Emily

chem lab
If the object was resting on the bottom of the beaker during Archimedes determination what happens to the weight
February 2, 2014 by amy

AP BIOLOGY LAB
I am doing an ap biology lab on plant photosynthesis. It's specifically lab # 4 on plant pigments and photosynthesis and it's on question # 8 on Exercise 4B: Photosynthesis/ The Light Reaction. Identify the function of each of the cuvettes. I already have gone to the lab bench...
November 2, 2008 by Roger

Chemistry
Which of the following is the best definition of Hess' Law? A. Heat evolved in a given process can be expressed as the sum of the heats of several processes that, when added, yield the process of interest. B. The enthalpy of a process is the difference between the enthalpy of ...
May 7, 2007 by Jared

Chem
There was this substance we used in a lab and I'm not quite sure what it is. It was a clearish, flaky, solid. It was brittle and insoluable in water. Does anyone know what it could be?
March 1, 2009 by Lena

chem
Okay so Im doing a lab on preparation of K3[Fe(C2O4)3]*3H2O The final weight I got 2.835g. How can I find the theoretical yield of this? What do I need?
February 13, 2009 by Natash

O-Chem
What is EDTA exactly and why do we use it in lab setting? I researched but having a little hard time understanding the concept. thanks
April 7, 2009 by Matt

science(chem)
I synthesized Nylon in my lab for organic chem. I need help figuring out the theoretical yield so I can compare it to my product that I synthesized. I looked up the reaction online on Google by typing in "Synthesis of adipoyl chloride and nylon 6.6." I clicked on the first ...
February 16, 2008 by ~christina~

chem help asap
Describe how you would prepare 250.0 mL of a 0.500 M solution of NaCl by using apparatus found in a chemistry lab.
May 28, 2009 by brown

Biology Lab gr 12
hi, i did this lab, from this website and I was wondering if anyone could come up with 3 sources of error, and they can't be human error. Thanks! You are saving me! Seeing as I am not allowed to post to the website :(, search on google liver lab with sand, and it is with a ...
February 26, 2008 by INSANELY URGENT

Chem 2 Lab
Calculate the volume of a 0.150 M NaOH solution that will be required to neutralize all of the H+ ions in 0.400 grams of phosphoric acid?
April 25, 2012 by Lacey

Chem Lab
Aspirin synthesis and Analysis: Calculate theoretical yield of ASA? Used 3.5mL of acetic anhydride and 1.5g of salicylic acid.
November 2, 2012 by Cris

Physics Lab
I'm doing a lab on centripetal force but I'm not sure how to make the graphs. If you search for "centripetal force lab" on Google and click "I'm Feeling Lucky" it will take you to the exact lab I'm doing. I'm supposed to graph Fc vs. Vt, Fc vs. Vt^2, and Fc vs. e^Vt, but I don...
December 18, 2008 by Bob

drying agent in chem
Is it advisable or not to leave a solution in drying agent for a few days? ~I did this ..since my chem lab instructor said to but I'm not sure I believe him. He sounded unsure of himself when he answered me. solution: methylene chloride (extracting oil of caraway) drying agent...
October 27, 2007 by ~christina~

Chemistry Lab
In chemistry we are doing a lab that involves crucibles and Mg ribbon, we have three days to complete the lab. Anyways do you think it would be alright to substitute the mass of the crucible we had the first day with the mass of the crucible we had today? We know how much the ...
November 18, 2014 by Anonymous

chem lab
If a sample tube was smudged with a fingerprint when inserted into a spectrometer, what affect would this have on the value of A (absorbance) when you read it? explain.
November 13, 2008 by Mischa

physics
A proper lifetime of a certain particle is 100.0ns. a) How long does it live in the lab frame if it moves at V=0.960c? b) How far does it travel in the lab during that time? c) What is the distance travelled in the lab frame according to an observer moving with this particle.
March 10, 2011 by libby

physics
A proper lifetime of a certain particle is 100.0ns. a) How long does it live in the lab frame if it moves at V=0.960c? b) How far does it travel in the lab during that time? c) What is the distance travelled in the lab frame according to an observer moving with this particle.
March 10, 2011 by libby

chem
This is for my vinegar titration lab: why are samples of vinegar weighed rather than measured ?
June 23, 2011 by Sara

chem
what is the difference between a bunsen burner and a lab burner?
September 18, 2012 by ann

organic chem
organic chemistry lab and why is water the first choice for recrystallization when all factors are equal?
October 11, 2010 by sharon

chem lab
does the voltaic cell(in exp) must be the same with the standard cell that we calculated based on the formula?
January 24, 2012 by Yuni

Chem Urgent Help ?
I have a lab dis monday .. plz someone help .. Lab Title is (( Recrystallization of a Solid )) Pre-Lab Questions.... Explain the purpose of the following in this experiment. a) using hot filtration b) not cooling (chilling) the hot filtered solution immediately c) washing the ...
November 22, 2008 by Juliana

chemistry
Hi I am in AP Chemistry and I did not take regulars chem so I have never done labs before and was wondering If anyone could give me examples on how to do a lab
December 16, 2011 by Nina

Chem-Extraction Lab
Why is dichloromethane not a good choice for re-crystallization of the caffeine? How could you determine that the product you had obtained was caffeine? Thanks!
September 16, 2014 by Nano

CHEMISTRY (WEBWORK)
SPARTAN. Which atom (a, b, c, d, e, f, g, h) in the haloacetic acid below has the maximum electrostatic potential? i cant copy the picture A. a B. b C. c D. d E. e F. f G. g H. h we all know we have the same one... just whats the answer????
July 6, 2010 by Anonymous

Chemistry
Why wouldn't you do this reaction directly in a lab (and would rather use Hess' Law to determine the enthalpy of formation)?: 1/2N2(g) + 2H2(g)+ 1/2Cl2(g) -> NH4Cl(s) I don't think the reactants are that dangerous...? It's still pretty safe to do in a lab, isn't it? Are ...
February 18, 2013 by a Canadian

chem
In the lab, you're handed a test tube with sodium chloride dissolved in water. You add aqueous barium carbonate to the tube. What are your observations? Thanks
January 24, 2008 by lena

Identify the substance
There was a substance I used in a lab for chem class and I`m not too sure what it was. They were tiny white balls about a millimeter in diameter. What would they be?
March 2, 2009 by Lena

Chem Lab Help
You are provided with 5 M solutions of sodium hydroxide and hydrochloric acid for use in this experiment (Separation). How you would have prepared these solutions. Thanks!
October 8, 2014 by Tom

Grade 12 chemistry
For a chem lab, i was given a table that results when pairs of chemical solutions are mixed.For each set of compounds that formed a precipitate, I had to determine the precipitate. I have done that and now one of the questions i have to answer based on the lab: Based on your ...
December 31, 2011 by Teneal

CHEM LAB
What is the Molar Enthalpy of Neutralization in kJ/mol if 5.00 moles of HCl(aq) (acid) neutralized 5.00 moles of NaOH(aq) (base) and released 6649J of heat?
November 5, 2013 by BRANDIE

Chem
I'm doing a vinegar titration lab and i need to know how can my acetic acid in vinegar be affected if a few droops of NaOH solution is not washed down with distilled water
June 23, 2011 by Sara

Chem Lab
What is the Molar Enthalpy of Neutralization (Hn) in kJ/mol if 5.00 moles of HCl(aq) (acid) neutralized 5.00 moles of NaOH(aq) (base) and released 2033 J of heat?
November 17, 2013 by brittany sheats

chem lab
set C: AgNO3(aq), Ba(NO3)2 (aq), HCI(aq), H2SO4(aq), NaOH(aq) what preliminary test results are you looking for to identify conclusively your unknown solutions as set C? Explain.
March 25, 2008 by natash

Organic Chem
I had posted this question yesterday morning at 4:58am. Any possibility someone can help? I just completed a lab called "Acid-Catalyzed Dehydration of an Alcohol: Synthesis of 2-Octenes." I started with 2-octanol and the lab instructions said the product had the possibility of...
July 15, 2011 by Carol

Physics
what can be the source of error in lab of forces equilibrium,force board lab?
September 26, 2013 by Riana

Physics
what can be the source of error in lab of forces equilibrium,force board lab?
September 26, 2013 by Riana

phsyics
hi, has anyone done the lab on 1.2 lab : constant velocity? it's about ticker tape. thanks
March 11, 2009 by ashley

Biology Lab
What tense do you use when writing a discussion in a formal lab?
October 30, 2009 by Moi

science
Has anyone written up a Lab for the Sponge Capsule lab? I am trying to do a graph
September 9, 2012 by Gen

Lab
When doing a virtual lab everything is exact, but why would they still ask for absolute and relative errors?
June 21, 2011 by Diana

CHEM ABSTRACT
I need to write an abstract for my chemistry lab for identifying an unknown acid, is there a generic list of what to do for an abstract? because mine are always to long
April 4, 2014 by Amber

Chem
In the |Molecular Geometry Lab 1. List three ways in which models used in this experiment are inaccurate representations of orbitals? 2.explain why the ClF3 molecule is not a trigonal planar molecule?
November 2, 2010 by Leon

Chem Lab
Suggest another possible oxidising agent and reducing agent that can be used to replace potassium permanganate & iron (II) ammonium sulphate haxahydrate in experiment Redox Titration
February 9, 2012 by Wei AZ

Advice...about chemistry degree Dr.Bob
Based on the question topic posted by Britney below titled:In your opinion (your answer to this reminded me of something) (I posted the same thing there but I thought it was improper to piggyback on that post so I posted this under a new topic) I don't know where to start but ...
March 25, 2008 by ~christina~

chemistry
I did a lab on pressure and depth today. This lab was to simply submerge a plastic tube into a large graduated cynlinder to find the relationship between the two. I found that as the depth increases, so does the pressure. One of the questions I'm stuck on for part of my lab ...
January 11, 2010 by CL

science(chem)
Can someone tell me if this objective for my lab report sounds alright? The objective of this multistep lab was to ultimately synthesize 4-bromo-2-chloro-6-iodoaniline through the intermediate formation of acetanilide, 4-bromoacetanilide, 4-bromo-2-chloroacetanilide, and 4-...
April 14, 2008 by ~christina~

Physics
I just did a lab on potential difference/voltage, resistance, and current. What would be good title for my lab? Thank You.
April 8, 2008 by Tom

physics
I did a lab on the potential difference and how it relates to the number of batteries connected. What would be a good title for my lab?
April 15, 2008 by Tom

Organic Chem Lab
Assume your unknown ketone is 2-pentanone. What is the molar mass of your 2,4-dinitrophenylhydrazone product? I don't need or even want the answer, I just need an explanation of how to start working the problem. Thanks!
July 2, 2011 by Sarah

Chem
I have a question on a post lab that asks what would happen if you mix potassium bromide and Br2 (aq)? Wouldn't the answer be nothing, since yiu are just adding more of one of the elements to the conpound?
November 18, 2013 by Stacy

Honors Chemistry
We did a lab in class on Friday where we stuck a metal loop in various chemicals and stuck it in the flame of a Bunsen burner and we observed the flame's colors as the different metals went in. For every lab we do, we have to write a writeup which involves a graph. How could I...
September 20, 2009 by Emily

algebra
My science class is pretty small. There are just 18 students in the class. My teacher, Mr. Burnett, has an unusual system for picking lab partners. He has given each student a number from 1 to 18, and on lab days, he pulls two numbers out of a bag to match people up. During ...
November 1, 2011 by Linda

Chem 2068 lab
Once I have the molarity for KHP which is 0.0027 M, and i add 14.48 mL of NaOH to the solution, what is the concentration of NaOH in the solution.
October 18, 2010 by Car

Chem Lab
Can the NH3/NH4Cl system be sued to prepare a buffer of a pH 9.5? why or why not? Can it prepare a buffer of pH 5? There were two buffers, 0.2 M and 0.1M.
April 11, 2012 by Logan

chem
what effect would using fsr too much water to dissolve salt in water have on the results of a sand salt lab
October 18, 2011 by Anonymouse

Chem Pre-Lab HELP!
Write the complete and net ionic equations for the following reactions. Be sure to indicate the states of the reaction products. 1) AgNO3(aq) + NaCl(aq) ----> 2) CaCl2(aq) + Na2SO4(aq) ----> 3) Pb(ClO4)2(aq) + NaOH(ag) ----> 4) (NH4)2SO4(aq) + BaCl2(aq) ---->
February 23, 2010 by Macey

Chem- Ideal Gas Law
Carbon dioxide can be made in the lab by the reaction of hydrochloric acid with calcium carbonate. How many milliliters of dry CO2 at 20.0 C and 745 torr can be prepared from a mixture of 30.6 g of CaCO3 and 279 mL of 0.250 M HCl?
April 2, 2014 by Anonymous

chem
A scientist wants to make a solution of potassium phosphate, K3PO4 for a lab experiment. How many grams of K3PO4 will be needed to produce 575ml of a solution that has a concentration of K+ ions of 1.4M.
May 10, 2011 by alex

chemistry
i have to write lab report based on my determination of chemical formula & in lab we did experiment & found out the formula was cucl2*2h2o, in my lab report i have to start with mole to mole ratio how can i start writing that?
May 29, 2013 by Niki

Chemistry
1. Imagine that you work at a company that prepares chemical solutions. You are asked to label a solution to sell to different customers. One customer is a hospital, another is a chemistry lab at a university, and a third is a physics lab at a university. You added 900 kg of ...
September 10, 2014 by SMS

chemistry
Outline a separation scheme for isolating pure isopentyl acetate from the reaction mixture. ( post lab question for the Banana oil lab)
July 9, 2013 by chelsea

chem lab
when setting up their experiment, a student discovered that the solution in their flask turned bright pink upon adding 2 drops of the indicator, even before beginning the titration. what do you suspect was the mistake that the student made?
April 7, 2008 by natash

calculus
Follow this link please! It is an interactive question that I just cannot figure out webwork.math.nau.edu/webwork2/CFisher_136/Continuity/3/?user=aed73&effectiveUser=aed73&key=KwyySMKGHvKe32dogu0ViC6rI90u7iI9&displayMode=jsMath&showOldAnswers=1
September 16, 2011 by Aly

Chem 204 Lab
Dr. S. N. Too ran the above reaction using 10.00 g of 1,5-pentanediol and 7.00 g of HCl. He obtained 9.23 g of 1,5-dichloropentane. What was his per cent yield? HO(CH2)5OH + 2 HCl --------> Cl(CH2)5Cl + 2 H2O
September 12, 2012 by Justin

Organic Chem Lab
If I have separate solutions of the compounds benzoic acid and benzaldehyde, and they are spotted on an alumina gel TLC plate and run using CH2Cl2 as the eluant, which compound will have the higher Rf value? Explain.
October 11, 2009 by Sarah

organic chem
extraction lab: suppose that aqueous and organic (diethyl ether) layers were not mixed thouroughly predict the effect that this would have on the results in your answer, consider melting point temperature of benzophenone thx
June 16, 2010 by jay

chem lab
Calculate the theoretical pH after 2.50 mL and 9.50 mL of NaOH has been added in both the titration of HCl and of HC2H3O2. Indicate if the volume of NaOH is before or after the equivalence point. i dont know where to start.
May 10, 2011 by Anonymous

Pages: 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | Next>>

Search
Members