Wednesday
July 23, 2014

Search: calcium carbide can react with water to make acetylene gas according to the following reaction

Number of results: 43,940

Chemestry @
A 27.6ml volume of chlorine gas is collected over water at 23 C and 750 torr. The mass of the gas is 78.4mg. The vapor pressure of water is 21 torr. a)what is the pressure of the chlorine gas? b) what volume does the chlorine gas occupy? c)How many moles of chlorine gas are ...
October 26, 2008 by Please help

Chemistry
1)The following balanced chemical equation represents the reaction of calcium carbonate CaCO3 (s), with hydrochloric acid : CaCo3(s) + 2HCl (aq) -> CaCl2(aq) + CO2(g) + H2O(l) If 155 g of calcium carbonate reacts with 245 g of hydrochloric acid, what mass of calcium ...
December 19, 2012 by Nikki

Chemistry
The label on a 1-pint bottle of mineral water lists the following components. If the density is the same as pure water and you drink 3 bottles of water in one day, how many milligrams of each component will you obtain? calcium 28 ppm
September 5, 2011 by Jennifer

Chemistry
A solution is made by dissolving 10.9 g of calcium chloride, CaCl2,in enough water to make exactly 500 mL of solution. What is the concentration (molarity) of CaCl2 in mol/L?
July 24, 2010 by Shelia

AP Chemistry
Small quantities of hydrogen gas can be prepared in the laboratory by the addition of aqueous hydrochloric acid to metallic zinc. Zn(s)+2HCl(aq) -> ZnCl2(aq)+ H2(g) Typically, the hydrogen gas is bubbled through water for collection and becomes saturated with water vapor. ...
November 3, 2010 by Anonymous

science
The combustion of acetylene in the presence of excess oxygen yields carbon dioxide and water: 2C2H2 (g) + 5O2 (g) 4CO2 (g) + 2H2O (l) The value of So for this reaction is __________ J/K.
August 1, 2010 by lauren

chem
How many moles of water are produced when 1.05 g of oxygen gas reacts with 1.22 g of hydrogen gas to produce water?
March 9, 2008 by megan

Chemistry - Equations
I am a student in the ninth grade and I need help with the following problems because I do not understand how to do them. I appreciate your help and thanks once again. 7. in 2CO(grams) + O2(grams) => 2CO2(grams), what is the ratio of moles of oxygen used to moles of CO2? 9...
January 31, 2008 by Theodore

Chemistry
What mass of lithium (in g) is required to react completely with 57.5mL of N2 gas at STP? Lithium reacts with nitrogen gas according to the following reaction: 6Li(s)+N2(g)→2Li3N(s)
March 19, 2014 by Carter

chemistry
A cook wants to heat 1.10kg of water from 33 C to 100 C. If he uses the combustion of natural gas which is exothermic to heat the water, how much natural gas will he need to burn? Natural gas produces 49.3 kJ/gram.
February 4, 2012 by Katie

Chemistry Balancing Equations
I really need help with balancing these equations: PLEASE HELP!! 1. Sodium Hydrogen Sulfite reacts with hydrochloric acid to produce sulfur dioxide gas, water and sodium chloride 2. Sodium nitrate reacts with hydrochloric acid to produce nitrogen monoxide gas, water sodium ...
March 14, 2011 by Anonymous

science
Propose a method to find the specific heat of sodium which reacts with water Two methods to think about. Use a liquid with which Na doesn't react. OR, use a weighed amount of Na metal to react with water. Measure T of the water before addition of Na and after adding Na. That ...
February 27, 2007 by guru

AP Chem - to Dr. Bob
I don't understand how to even start this problem: A mixture of H2(g), O2(g), and 2 mL of H2O is present in a 0.5 L rigid container at 25 degrees Celsius. The number of moles of H2 and the number of moles of O2 are equal. The total pressure is 1146 mmHg. Vapor pressure of ...
January 23, 2007 by Belinda

Chemistry
A 1.42-g sample of a pure compound, with formula M2SO4, was dissolved in water and treated with an excess of aqueous calcium chloride, resulting in the precipitation of all the sulphate ions as calcium sulphate. The precipitate was collected, dried, and found to weigh 1.36 g. ...
December 13, 2011 by Olivia

CHEMISTRY
If heat of combustion of acetylene C2H2 is -1301.1 kJ/mol then : a) Write balanced thermochemical equation of acetylene combustion b) If 0.25 mol C2H2 reacted according to the previous equation , and what is the emitted energy ? c) how many grams needed to give off 3900 kJ ...
July 14, 2014 by MAD

chemistry
Silicon carbide is one of the hardest materials known. It is often known commercially as carborundum. Silicon carbide is used primarily as an abrasive for sandpaper and is manufactured by heating common sand (silicon dioxide, SiO2) with carbon. - What mass of SiC should result...
February 10, 2013 by may

DR Bob one more
1. calcium carbonate < calcium oxide + carbon dioxide dr. Bob Hydrolic acide + sodium hydroxide < sodium chloride + water this cant be balanced already as assignment says we must balance each one
December 13, 2007 by sam

chemistry
problem 2. a sample of calcium chloride weighs 1.64g. it is dissolved in water and silver nitrate solution added.a precipitate of silver chloride weighing 4.24g was formed.determine the percentage composition of each element. the simple formular of calcium chloride.
October 28, 2009 by yankoua

Gen Chemestry
A 27.6 ml volume of chlorine gas is collected over water at 23 C and 750 torr. The mass of the gas is 78.4 mg. The vapor pressure of water is 21 torr. a) What is the pressure of the chlorine gas? b) How volume does the chlorine gas occupy? c) How many moles of chlorine gas are...
October 25, 2008 by Roth

Chemistry
I would really aprreciate if someone could help me, thank you so much. The white limestone cliffs of Dover, England, contain a large percentage of calcium carbonate(CaCO3). A sample of limestone weighing 84.4g reacts with an excess of hydrochloric acid to form calcium chloride...
July 9, 2007 by Amy

Science
At what tempertures is calcium a solid, liquid, or gas?
December 30, 2008 by Thao

chemistry
if a small piece of sodium is dropped into water,it begins to react, forming hydrogen gas and sodium hydroxide. In the equation, 2Na(s)+2H2O(l) 2NaOH(aq)+H2(g),the sodium hydroxide that is formed is a..
August 5, 2012 by debbie

chemistry
1- A compound is 87.5% nitrogen and 12.5% hydrogen. The molecular weight of the compound is 32 g/mol. Describe the molecule referencing shape, and inter-molecular forces. 2- Gaseous butadiene, C4H6 , reacts with hydrogen gas in the presence of a platinum catalyst to form ...
January 6, 2014 by Katie

chem
Would you expect jewelry made of an alloy of silver and copper to tarnish(react) in an environment where chlorine fumes exist? Why or why not? Im assuming yes because both silver and copper metals react with chlorine gas...I don't know if I am correct in answering so.
March 18, 2009 by danny

CHEMISTRY
how many grams of zinc are required to react with excess acid to make one liter of hydrogen at STP? i have no clue how to go about this i need help Write the balanced equation. Zn + 2HCl ==> ZnCl2 + H2 2. Use PV = nRT to convert 1 L H2 gas to mols OR take the shortcut ...
April 23, 2007 by yellowone

CHEMISTRY
Hydrogen gas and iodine gas react via the equation, H2 + I2 <--> 2HI, and K=76 at 600K. If 0.05 mole of HI is placed in a flask at 600K, what are the equilibrium concentrations of HI, I2, H2? I am very lost at where to even start with this problem
March 18, 2012 by Kristen

chemistry
What is the final temperature of water when 2.70 grams of calcium chloride is dissolved in 25 mls of water at 25.5 Celcius.
October 22, 2012 by Chelsi

Chemistry
What is the precipitate of calcium nitrate, Ca(NO3)2, and sodium chloride, NaCl?? Sodium nitrate and calcium chloride are both soluble in water.
October 29, 2006 by none

chemistry
a 256 mL sample of an unknown gas was collected over water at 23 degrre celsius and 750 mmHg. the gas has a mass of 0.80 grams. what is the molar mass of the gas? (the vapor pressure of water at 23 degree celsius is 21.0 mmHg)
March 19, 2012 by Jesse

Chemistry
0.300 moles of bromine gas (Br2) and 0.500 moles of chlorine gas (Cl2) react to for tribromochlorine (Br3Cl). how many moles of this product will form ?
August 11, 2013 by kate

Chemistry
When elemental sulfur,S8,is heated with AgF,a gas forms that contains only sulfur and fluorine. The following tests were done to characterize this gaseous product. *The density of the gas was found to be 0.807g/L at 152mmHg and 35 degrees celsius. *When the gas reacts with ...
November 10, 2009 by rasuka_geo

chem
when a gas is collected over water, is the gas pure? No. It has water vapor in it.
March 19, 2007 by david

chemistry
Write the correct equation for the formation of a white precipitate on mixing together 10 mL each of 1 M calcium chloride, 1 M calcium bromide, 1 M calcium nitrate, 1 M sodium carbonate, 1 M potassium carbonate, and 1 M rubidium carbonate.
March 27, 2012 by liz

Chemistry
Hii! I have a question: So the flame photometer uses a natural gas flame (1800 oC), what if it uses acetylene - nitrous oxide flame which is ~3000 oC, what would happen to the emission intensities? Thanks!
August 16, 2010 by Anonymous

Ap chem
When 80.4 moles of calcium acetate are dissolved in enough water to make 222.2 milliliters of solution, what is the molarity of acetate ions? Answer in units of M I already tried moles/liter and it was wrong
April 1, 2012 by Sarah

Chemistry
Exhibit 8-1 For the following questions, consider the equation below. Zinc will react with a solution of hydrochloric acid to produce hydrogen gas: Zn(s) + 2 HCl(aq) ZnCl2(s) + H2(g) Refer to Exhibit 8-1. How many moles of hydrochloric acid react with one mole of zinc? 1. ...
December 14, 2011 by nan

chemistry
Al2(SO4)3+6KOH-->2Al(OH)3+3K2SO4 a)How many grams of potassium hydroxide are needed to completely react with 870 mg of aluminum sulfate? b)If you want to make 7.00 grams of potassium sulfate, how many grams of aluminum sulfate would you need to react? c)How many grams of ...
April 29, 2013 by ashley

Chemistry
A 108 mL gas sample has a mass of 77.96 mg at a pressure of 1140 mmHg and a temperature of 183 °C. Assume ideal gas behavior and a completely insulated system, and please don’t forget units with your answers. The system is cooled. Calculate the amount of heat that will be ...
March 10, 2014 by keitanako

engineering practise
plz give hazards of cylinder used in gas welding and plz give information about oxy-acetylene welding..
October 22, 2010 by daani

engineering practise
plz give hazards of cylinder used in gas welding and plz give information about oxy-acetylene welding..
October 22, 2010 by daani

Chemistry. Check my answer please!
A 1.994 g sample of gypsum, a hydrated salt of calcium sulfate, CaSO4, is heated at a temp. above 170 C in a crucible until a constant mass is reached. The mass of anhydrous CaSO4 salt is 1.577 g. Calculate the percent by mass of water in the hydrated calcium sulfate salt. ...
November 21, 2008 by Sarah

Science
When elemental sulfur,S8,is heated with AgF,a gas forms that contains only sulfur and fluorine. The following tests were done to characterize this gaseous product. *The density of the gas was found to be 0.807g/L at 152mmHg and 35 degrees celsius. *When the gas reacts with ...
November 10, 2009 by anonymous

chemistry
nitrogen and hydrogen react in the haber process to form ammonia. All substances are in the gas phase. If 0.385atm of nitrogen and 0.792 atm of hydrogen react, what is the partial pressure of ammonia(in mmHg) when this reaction goes 67 complete. The volume and temperature are ...
March 12, 2009 by michele

Science/CHEM
Part 1 Chapt 4 1. You dissolve 157.1 g of ammonium nitrate in a 250 mL volumetric flask and add water to the mark (call this solution A). You take 30 mL of solution A and place it in a 100 mL volumetric flask and add water to the mark (this is solution B). Next you take 50 mL ...
September 28, 2008 by Kelsey

Chemistry 12
15. The concentration of hydroxide ions in a solution of nitric acid 0.2 M is: a. 2 x 10-14 M b. 5 x 10-14 M c. 5 x 10-7 M d. 2 x 10-1 M 16. Aqueous solutions of strong acids and strong bases: a. are good electricity conductors b. make litmus paper become red c. have a pH of 7...
December 3, 2012 by Need Help

Science
Acetylene gas c2h2 reaction cac2+2h2o. C2h2+Ca(oh)2 how many moles of cac2 needed to prepare 10.0 g c2h2 please show work and answer soon final question on big test review
February 17, 2014 by Victor

Chemistry
Identify the following chemical equations by type. 1. If an electric discharge produces 500 cm3 of ozone (O3), how many cm3 of oxygen (O2) are required? 3O2(g) ---> 2O3(g) 2. When 2.75 dm3 of O2 react with an excess of glucose (C6H12O2), according to the reaction below, ...
October 24, 2013 by UnName

chemistry
A typical bathtub can hold 106 gallons of water. Calculate the mass of natural gas that would need to be burned to heat the water for a tub of this size from 56 ◦F to 87 ◦F. Assume that the natural gas is pure methane (CH4) and that the products of combustion are ...
October 26, 2013 by maria

Chemistry
A solution contains an unknown amount of dissolved calcium . Addition of 0.112 mole of K3PO4 causes complete precipitation of all the calcium. How many moles of calcium were dissolved in the solution?
May 14, 2011 by Katie

Chemistry
2NaF + CaCl2 CaF2 + 2NaCl An excess of 0.20 M NaF is used to precipitate the calcium ions from a 50.0 mL sample of a calcium chloride solution. What is the concentration of the original calcium chloride solution?
July 10, 2011 by Neha

Physical Science
A chemist is investigating an unknown gas. She observes that it combines with oxygen. It takes two liters of oxygen to fully react with one liter of the unknown gas, and that the resulting volume of gas is also two liters. What does she conclude? A.) The unknown gas is ...
October 17, 2011 by Anonymous

College Chemisty
The pH of water collected in a stormwater run-off downstream from a Union Carbide chemical factory is 4.82. Calculate the H+ ion concentration of rainwater. The problem may start with: pH= -log H+ = 4.82. The answer is 1.5x10 power -5. Again, Can you please show steps for maths.
October 22, 2010 by Elleni

science
you need to prepare 30g of calcium cholride. you have 2m hydrochloric acid and a new container off pure calcium carbonate. Calculate the number of mole of calcium chloride that u need to prepare
June 29, 2013 by marissa

Chemistry
If 111.70 g of iron react with oxygen gas to produce iron (III) oxide, how many moles of oxygen gas will be needed?
April 2, 2011 by Heyyy

chemistry
225 mg sample of diprotic acid is dissolved in enough water to make 250mL solution.the pH of this solution is 2.06. a saturated solution of calcium hydroxide Ksp=1.6E-6 Then the saturated solution of calcium hydroxide is prepared by adding excess calcium hydroxide to pure ...
March 2, 2008 by timmathy

Chemistry
Calcium carbonate, CaCO3(s), decomposes upon heating to give CaO(s) and CO2(g). A sample of CaCO3 is decomposed, and carbon dioxide is collected in a 250 mL flask. After decomposition is complete, the gas has a pressure of 1.3 atm at a temperature of 31℃. How many ...
May 5, 2011 by Veronica

Chemistry
Acetylene(C2H2) torches are used in welding. How much heat (in kJ) evolves when 2.0L of C2H2 (d=1.0967kg/m3) is mixed with a stoichiometric amount of oxygen gas? The combustion reaction is C2H2(g)+52O2(g)→2CO2(g)+H2O(l), ΔH∘=−1299.5kJ
March 24, 2014 by Kelly

chemistry
LP gas burns according to the exothermic reaction: C3H8(g) + 5 O2(g) right arrow 3 CO2(g) + 4 H2O(g) ΔHrxn = −2044 kJ What mass of LP gas is necessary to heat 1.2 L of water from room temperature (25.0C) to boiling (100.0C)? Assume that during heating, 18% of ...
March 30, 2013 by Dr. Phil

chemistry
Zinc combines with hydrochloric acid to form aqueous zinc chloride and hydrogen gas. If 300.0 mL of a 0.150 M solution of HCl is allowed to react with excess zinc, how many moles of hydrogen gas would be produced? Part two: if this reaction happens at STP what volume of ...
March 6, 2012 by Anonymous

AP Chem
A sample of H2 is collected by displacing 145 mL of water. The pressures of the gas and the atmosphere are equalized. The atmospheric pressure is 745 mmHg. The temperature of the water and gas are identical at 26 degrees C. How many moles of H2 have been evolved?
November 4, 2008 by Anna

Chemistry (urgent)
Hi, I have a few chemistry problems that I'm having trouble solving. I put my attempted solutions after the problems in *'s. There was one problem I had no idea how to solve. What concentration of silver chromate (Ksp = 9.0 x 10-12) will dissolve to make a saturated solution ...
April 12, 2010 by Maggie

Chemistry
1.Write a mathematical equation that can be used to calculate the concentration of the HCl solution after the standardization procedure (Titration #1). 2. Using LeChateliers principle, predict whether [OH-] in the calcium hydroxide/0.050 M NaOH solution is expected to be ...
April 16, 2012 by Cassie

Chemistry- partial pressures
A sample of gas collected over water at 42 degrees C occupies a volume of one liter. The wet gas has a pressure of .986 atm. The gas is dried and the dry gas occupies 1.04 L with a pressure of 1.00 atm at 90 degrees C. Using this information, calculate the vapor pressure of ...
January 1, 2007 by Dave

chemistry
For a lab in school we had to mix together sodium carbonate and calcium chloride and had that go through a filter, finally ending with our final product of calcium carbonate (chalk), my question is that we have to do a graph and the graph shows that as the mass of calcium ...
April 12, 2011 by kay

chemistry help !!!!!!!!!!!!!!!!
H2(g)+Cl2(g)=2HCL(g) it is found experimentally that 1 mole of H2 gas react with 1 mole of CL2 gas at constant temperature & pressure , to release 184kJ of heat .what is the enthalpy change for this reaction? ∆H=
January 4, 2013 by john

chemistry
You react 25.0 liters of oxygen gas at STP with 50.0 ml of ethanol liquid. Ethanol has a density of 0.789 g/ml. After actually running the reaction you determined the percent yield was only 78.5%. How many LITERS of CO2 did you make? (Must put CO2 in answer la
May 30, 2014 by Amy

Clinical Chemistry
This one seems like an easy question but I don't know where to start. Please help! In serum, about 55% of total serum calcium is bound. The measurement of ionized (free) calcium with an ISE is 1.10 mM. What is an estimate of the total calcium in this specimen?
April 9, 2013 by Cosette

Chemistry
Aluminum carbide, Al2C3 (s), reacts with water to yield aluminum hydroxide, Al(OH)3 (aq), and methane, CH4 (g). Write the equation for the reaction. How many grams of Al4C3 (s) would be needed to prepare 1.000 L of CH4 (g) measured at STP?
October 1, 2013 by Cris

Chemistry
Use the following answers for questions 1 - 3. (A) F (B) S (C) Mg (D) Ar (E) Mn 3. Forms oxides that are common air pollutants and that yield acidic solution in water I think the answer to this one is B, but why is it B? I see how it would yield an acidic solution, but what ...
April 12, 2007 by Rachel

chem
write a balanced equation for:Gaseous carbon dioxide and liquid water react to produce aqueous glucose (C6H12O6) and oxygen gas. I try but everytime i change the coefficient it makes the other elements unbalanced. the starting formula i got was: CO2(g) + H2O(l) -> C6H12O6(...
November 21, 2010 by hannah

Chemistry
This is a three part problem I need help in figuring out pleaseI n each of the questions below you are going to determine a different type of balanced equation for the same reaction. Make sure your equations have the lowest whole number coefficients possible. Indicate the ...
October 10, 2012 by Melinda

Chemistry
This is a three part problem I need help in figuring out pleaseI n each of the questions below you are going to determine a different type of balanced equation for the same reaction. Make sure your equations have the lowest whole number coefficients possible. Indicate the ...
October 10, 2012 by Melinda

Chemistry
When 0.4300g of NaNO2 is allowed to react with an excess of HSO3NH2, the volume of water is 24.6 degrees celsius and that of the gas is 24.21degress celsius. The atmospheric pressure is 100.72kPa. Calculate the molar volume of N2 at 298.15 K and 100 kPa. You may not use PV=NRT
May 23, 2011 by Codec

Chemistry
When 0.4300g of NaNO2 is allowed to react with an excess of HSO3NH2, the volume of water is 24.6 degrees celsius and that of the gas is 24.21degress celsius. The atmospheric pressure is 100.72kPa. Calculate the molar volume of N2 at 298.15 K and 100 kPa. You may not use PV=NRT
May 23, 2011 by Codec

AP Chemistry
A typical bathtub can hold 93 gallons of water. Calculate the mass of natural gas that would need to be burned to heat the water for a tub of this size from 60◦F to 99◦F. Assume that the natural gas is pure methane(CH4) and that the products of combustion are ...
October 11, 2013 by Gabriella

Chemistry
Two more need help figuring out how to do: How many liters of water vapor can be produced when 8.23 liters of oxygen gas reacts with hydrogen gas (H2g + 02g = H20g. How many liters of water vapor can be produced if 108 grams of methane gas are conbusted at 312K and 98 atm. CH4...
July 23, 2011 by Anonymous

eighth grade math
at temperaturesof 100 degrees celsius or higher, water changes to steam (a gas).At temperatures of 0 degrees celsius or lower water changes to ice (a solid) . in between these extremes, water is a liquid. draw number lines showing the tempertures at which the water is: a. a ...
March 17, 2009 by lauren<3

chemistry
The equation for burning C2H2 is 2C2H2(g) + 5O2(g) ⎯→ 4CO2(g) + 2H2O(g) a. If 15.9 L C2H2 react at STP, how many moles of CO2 are produced? (Hint: At STP, 1 mol = 22.41 L for any gas.) b. How many milliliters of CO2 (density = 1.977 g/L) can be made when 59.3 mL O2...
June 2, 2010 by rob

Chemistry
A 0.188g sample of unknown metal, X (s), produced 71.4 ml of hydrogen gas when reacted with HCL according to the equation: X(s)+2HCL(aq)--->XCl2(aq)+H2(g) The gas was collected over water at 23 degrees Celsius. The levels of water inside and outside the gas collecting tube ...
February 10, 2011 by K

chemistry
ammonia (NH3) chemically reacts with oxygen gas (O2) to produce nitric oxide (NO) and water (H2O). What mass of water is produced by the reaction of 1.09g of oxygen gas?
March 8, 2011 by Mal

chemistry
a 500ml sample of oxygen gas at 24 degree celsius was prepared by decomposing a 3% aqueous soution of hydrogen peroxide in the presence of manganese catalyst by the reaction: 2h2o2 = 2 h20 + o2... the oxygen was colletec by displacement of water. the total pressure of gas ...
July 10, 2011 by Elizabeth

Chemistry
Explain why iron corrodes more quickly in seawater than in freshwater. I'm getting conflicting answers from searching on Google; is it because the corrosion of iron is a redox reaction, which involves a transfer of electrons, and therefore this transfer of electrons would be ...
May 7, 2013 by a Canadian

chem repost
write a balanced equation for:Gaseous carbon dioxide and liquid water react to produce aqueous glucose (C6H12O6) and oxygen gas. I try but everytime i change the coefficient it makes the other elements unbalanced. the starting formula i got was: CO2(g) + H2O(l) -> C6H12O6(...
November 21, 2010 by hannah

AP Chemistry
Which action(s) will decrease the equilibrium concentration of a non-reacting gas in water? 1. decreasing the temp. of the water 2. decreasing the volume of water 3. decreasing the pressure of the gas above the liquid a. 1 only b. 2 only c. 3 only d. 1 and 3 e. 1, 2, and 3
April 4, 2008 by Joe

Chemistry
Toxic Carbon monoxide gas is produced when fossil fuels such as gasoline, burn wihtout sufficient oxygen gas. The CO ca eventually be converted to CO2 inthe atmsphere. Automobie cata;yctic converters are desgned to speed up this conversion: How many moles of oxygen gas would ...
March 31, 2011 by Keren

Chem
The molecules water (H2O) and methane (CH4) have similar masses, but methane changes from a gas to a liquid at -161C. Water becomes a gas at 100C. What could account for the differences?
March 5, 2011 by Anonymous

Physic/Chemistry
You react 25.0 liters of oxygen gas at STP with 50.0 ml of ethanol liquid. Ethanol has a density of 0.789 g/ml. After actually running the reaction you determined the percent yield was only 78.5%. How many LITERS of CO2 did you make? (Must put CO2 in answer label)
May 20, 2014 by Bree W.

PHYSICS
A copper vat is 10 m long at room temperature (20 degrees C). How much longer it is when it contains boiling water at 1 atm pressure? Air in a balloon does 50 J of work while absorbing 70 J of heat. What is its change in internal energy? A bottle containing 3 kg of water at a ...
February 17, 2011 by Matt

Jefferson
Nitric acid and zinc react to form zinc nitrate, ammonium nitrate, and water. 4Zn(s) + 10HNO3(aq)→ 4Zn(NO3)2(aq) + NH4NO3(aq) + 3H2O(l) A. How many atoms of zinc react with 1.49g HNO3? B. Calculate the number of grams of zinc that must react with an excess of HNO3 to ...
January 7, 2013 by Gloria

chemistry
Nitric acid and zinc react to form zinc nitrate, ammonium nitrate, and water. 4Zn(s) + 10HNO3(aq) → 4Zn(NO3)2(aq) + NH4NO3(aq) + 3H2O(l) A. How many atoms of zinc react with 1.49g HNO3? B. Calculate the number of grams of zinc that must react with an excess of HNO3 to ...
January 7, 2013 by Anonymous

chemistry
Calculate the volume of natural gas (methane) required to bring 2.6 L of water to a boil. Assume the initial temperature of the water is 21 C, and the methane is at 1 bar and 25 C. Assume that methane is an ideal gas, the specific heat capacity of water to be constant and ...
December 4, 2011 by Katie

chemistry
Use bond energies to predict the molar enthalpy of combustion of acetylene gas. 2C2H2 + 5O2--> 4CO2 + 2H2O I am confused as to how to do the 2C2H2 in relation to the bonds? how many c-c bonds would there be, or would they be triple bonds?
October 11, 2010 by ben

physics
The diffusion coefficient for calcium ions crossing a biological membrane 10nm thick is 300 micrometers squared/second and the concentration difference of calcium ions across the membrane is 400 mol/m^2 (Molar mass of calcium is 40 kg/mol) Determine the number of moles of ...
March 27, 2010 by Kelly

Chemistry
Acetylene (C2H2) and hydrogen fluoride (HF) react to give difluoroethane: C2H2+2HF->C2H4F2 When 2.3 mol of C2H2 and 12 mol HF are reacted in a 15.4 L flask, what will be the pressure in the flask at 13C when the reaction is complete? I know I'm supposed to find the ...
April 16, 2011 by Dewey

Chemistry
Describe how you would obtain pure crystals of Sodium chloride from a muxture of solid sodium chloride and solid zinc carbonate Step1 Step 2 Step 3 1. Add HCl to react with the carbonate. The products are zinc chloride, CO2, and water. The CO2 leaves as a gas and the water is ...
April 24, 2007 by Ali

science
Which pair of substances would likely neutralize each other? A) lye and amonia B) vinegar and battery acid C) ammonia and calcium carbonate D) distilled water and rain water
October 22, 2010 by Rebecca

College Chem I
Based on the types of bonding in the following compunds, explain why you would expect: 1) calcium chloride (CaCl2) to be soluble in water 2) Ethane (CH3CH3) to be insoluble in water
May 2, 2011 by James

Chemistry
50.00 mL of OOH was diluted to 250.0 mL with deionized water. In the determination of the total cation concentration, 25.00 mL aliquots of the dilute OOH were passed through a cation exchange column and the eluent titrated with an average 27.42 mL of 0.1134 M NaOH. In the ...
January 25, 2012 by Camice

Chemistry
50.00 mL of OOH was diluted to 250.0 mL with deionized water. In the determination of the total cation concentration, 25.00 mL aliquots of the dilute OOH were passed through a cation exchange column and the eluent titrated with an average 27.42 mL of 0.1134 M NaOH. In the ...
January 26, 2012 by Georgia

chemistry
50.00 mL of OOH was diluted to 250.0 mL with deionized water. In the determination of the total cation concentration, 25.00 mL aliquots of the dilute OOH were passed through a cation exchange column and the eluent titrated with an average 27.42 mL of 0.1134 M NaOH. In the ...
January 26, 2012 by Annabelle

Pages: <<Prev | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | Next>>

Search
Members