Sunday

January 25, 2015

January 25, 2015

Number of results: 11,634

**physics**

A pulley rotating in the counterclockwise direction is attached to a mass suspended from a string. The mass causes the pulley's angular velocity to decrease with a constant angular acceleration α = -2.2 rad/s2. If the pulley's initial angular velocity is ω = 5.37 rad...
*November 4, 2010 by aok*

**Physics**

A wind turbine is initially spinning at a constant angular speed. As the wind's strength gradually increases, the turbine experiences a constant angular acceleration of 0.180 rad/s2. After making 2874 revolutions, its angular speed is 139 rad/s. A. What is the initial angular ...
*March 30, 2012 by Natasha*

**physics**

A wind turbine is initially spinning at a constant angular speed. As the wind's strength gradually increases, the turbine experiences a constant angular acceleration 0.170 rad/s2. After making 2870 revolutions, its angular speed is 131 rad/s. (a) What is the initial angular ...
*July 16, 2013 by kyle*

**math**

An ice skater rotating around a vertical axis increases in angular velocityfrom 450degrees/s to 610degrees/s in 2.3 seconds. Find the angular acceleration
*November 4, 2009 by stew*

**physics**

starting from rest grinding stone has constant angular acceleration 20 rad/sec at time = 0.reference axis is AB.what is angular displacement of line AB.
*October 31, 2014 by ali*

**Physics**

An electronic motor is revolving at 2000rpm. After 3sec, it is moving at 150rpm. Determine the angular acceleration. What is angular momentum of the electric motor if the rotational inertia is 18.kg.square meter in initial velocity? In final velocity? What is the average ...
*December 16, 2012 by Bob*

**vector mechanics- dynamics**

The slender bar AB weights 8 kg and moves in the xy plane, with its ends constrained to follow the smooth horizontal and vertical guides as shown in Figure Qi. By assuming the bar AB is initially at rest; a) Calculate the angular acceleration of the bar. b) Determine the new ...
*October 14, 2014 by Farah*

**Physics**

A solid disk with a mass of 100kg and a radius of 0.2m, turns clockwise through an angular displacement 10 rad when starting from rest to attain its maximum angular speed, of 1 revolution every 0.5s. What is the angular acceleration that the wheel experienced in order to ...
*February 20, 2012 by Brittany*

**PHYSICS**

A solid disk with a mass of 100kg and a radius of 0.2m, turns clockwise through an angular displacement 10 rad when starting from rest to attain its maximum angular speed, of 1 revolution every 0.5s. What is the angular acceleration that the wheel experienced in order to ...
*February 20, 2012 by Brittany*

**physics**

The blades of a ceiling fan have a radius of 0.340m and are rotating about a fixed axis with an intial angular velocity of +1.25rad/s2. When the switch on the fan is turned to a higher speed, the blades acire an angular acceleration of +2.55rad/s2. After 0.480s have elapsed ...
*January 21, 2014 by bre*

**physics**

A person is riding a bicycle, the wheels of a bicycle have an angular velocity of +20.5 rad/s. Then, the brakes are applied. In coming to rest, each wheel makes an angular displacement of +12.0 revolutions. (a) How much time does it take for the bike to come to rest? (b) What ...
*November 10, 2010 by sean*

**physics**

A person is riding a bicycle, the wheels of a bicycle have an angular velocity of +24.0 rad/s. Then, the brakes are applied. In coming to rest, each wheel makes an angular displacement of +16.0 revolutions. (a) How much time does it take for the bike to come to rest? s (b) ...
*November 17, 2011 by Taylor*

**Engineering Physics**

which of the following is equal to the angular acceleration of a disk? a)first time derivative of angular position b) second time derivative of angular position
*April 28, 2014 by Ash*

**physics**

A rotating object starts from rest at t = 0 s and has a constant angular acceleration. At a time of t = 7.0 s the object has an angular velocity of ω = 16 rad/s. What is its angular velocity at a time of t = 14 s?
*October 22, 2014 by vik*

**Physics please help! check if its correct**

A 3.00 kg stone is tied to a thin, light wire wrapped around the outer edge of the uniform 8.00 kg cylindrical pulley. The inner diameter of the pulley is 60.0 cm, while the outer diameter is 1.00 m. The system is released from rest, and there is no friction at the axle of the...
*February 26, 2012 by Brit*

**physics**

A planet orbits its star in a circular orbit (uniform circular motion) of radius 1.62x10^11 m. The orbital period of the planet around its star is 37.0 years. Determine the following quantities for this orbital motion: Angular acceleration , Tangential acceleration, Radial ...
*November 13, 2011 by sand*

**physics**

A planet orbits its star in a circular orbit (uniform circular motion) of radius 1.62x10^11 m. The orbital period of the planet around its star is 37.0 years. Determine the following quantities for this orbital motion: Angular acceleration , Tangential acceleration, Radial ...
*November 13, 2011 by sand*

**physics**

A planet orbits its star in a circular orbit (uniform circular motion) of radius 1.62x10^11 m. The orbital period of the planet around its star is 37.0 years. Determine the following quantities for this orbital motion: Angular acceleration , Tangential acceleration, Radial ...
*November 14, 2011 by sand*

**physics**

A planet orbits its star in a circular orbit (uniform circular motion) of radius 1.62x10^11 m. The orbital period of the planet around its star is 37.0 years. Determine the following quantities for this orbital motion: Angular acceleration , Tangential acceleration, Radial ...
*November 15, 2011 by sand*

**physics**

A planet orbits its star in a circular orbit (uniform circular motion) of radius 1.62x10^11 m. The orbital period of the planet around its star is 37.0 years. Determine the following quantities for this orbital motion: Angular acceleration , Tangential acceleration, Radial ...
*November 15, 2011 by sand*

**Physics**

Consider a 59-cm-long lawn mower blade rotating about its center at 2990 rpm. (a) Calculate the linear speed of the tip of the blade. (b) If safety regulations require that the blade be stoppable within 3.0 s, what minimum angular acceleration will accomplish this? Assume that...
*June 16, 2012 by Camilla*

**physics**

Search: A person is riding a bicycle, the wheels of a bicycle have an angular velocity of +18.0 rad/s. Then, the brakes are applied. In coming to rest, each wheel makes an angular displacement of +11.0 revolutions. How much time does it take for the bike to come to rest? What ...
*February 25, 2011 by Taylor*

**Physics**

A flywheel of a radius .5 m starts from rest and under goes a uniform angular acceleration of 3 rad/sec2 for a period of 5 seconds. Find the angular velocity of the flywheel at the end of this time? Find the angular displacement (in radians) that the wheel turns through during...
*May 9, 2012 by Mary*

**PHYSICS**

if force acts on body WHOSE ACTION LINE does not Passes through its center of gravity then body will experience A ANGULAR ACCELERATION b linear acceleration C ZERO ACCELERATION D ZERO ACCELERATION
*June 13, 2014 by AYESHA*

**science**

please help...A wheel 1.0m in diameter is rotating about a fixed axis with an initial angular velocity of 2rev.s-1.the angular acceleration is 3rev.s-1. (1)compute the angular velocity after 6s. (2)through what angle has the wheel turned in this time interval? (3)what is the ...
*January 2, 2012 by anonymous*

**physics**

A coin with a diameter of 1.9 cm is dropped on edge onto a horizontal surface. The coin starts out with an initial angular speed of 19 rad/s and rolls in a straight line without slipping. The rotation slows with an angular acceleration of magnitude 2.1 rad/s2. What is the ...
*September 27, 2010 by help*

**physics**

an airplane propeller slows from an initial angular speed of 12.5rev/s to a final angular speed of 5rev/s during the process the propeller rotates through 21 rev. find the angular acceleration of the propeller if in radians per second squared, assuming its constant?
*April 26, 2012 by adan*

**physics**

A person holds a ladder horizontally at its center. Treating the ladder as a uniform rod of length 3.55 m and mass 10.31 Kg, find the torque the person must exert on the ladder to give it an angular acceleration of 0.406 rad/s2. Should I set the given angular acceleration ...
*June 4, 2007 by anne*

**physics **

A merry-go-round starts from rest and accelerates uniformly over 29.0 s to a final angular velocity of 5.35 rev/min. (a) Find the maximum linear speed of a person sitting on the merry-go-round 4.50 m from the center. (b) Find the person's maximum radial acceleration. (c) Find ...
*March 1, 2011 by Anonymous*

**physics**

A merry-go-round starts from rest and accelerates uniformly over 26.0 s to a final angular velocity of 5.50 rev/min. (a) Find the maximum linear speed of a person sitting on the merry-go-round 4.25 m from the center. (b) Find the person's maximum radial acceleration. (c) Find ...
*March 14, 2012 by John*

**physics**

A person is riding a bicycle, and its wheels have an angular velocity of +15.5 rad/s. Then, the brakes are applied and the bike is brought to a uniform stop. During braking, the angular displacement of each wheel is +15.5 revolutions. (a) How much time does it take for the ...
*November 3, 2010 by james*

**Biomechanics **

A diver is trying a new more and is attempting to increase his angular acceleration in order to increase the angular displacement and thus produce more rotations from a standing start on the board the diver accelerates at 950 degree/s/s.what is the angular displacement over 0....
*March 9, 2013 by Vanitha*

**physics**

A tire placed on a balancing machine in a service station starts from rest and turns through 10.8 revolutions in 8.48 s before reaching its final angular speed. Calculate its angular acceleration.
*March 14, 2011 by Emily*

**Physics**

A tire placed on a balancing machine in a service station starts from rest and turns through 4.71 revolutions in 1.29 s before reaching its final angular speed. Calculate its angular acceleration.
*September 30, 2012 by Arthur*

**physics**

A tire placed on a balancing machine in a service station starts from rest and turns through 4.82 revolutions in 1.48 s before reaching its final angular speed. Calculate its angular acceleration.
*October 4, 2012 by Emily *

**physics**

A tire placed on a balancing machine in a service station starts from rest and turns through 4.82 revolutions in 1.48 s before reaching its final angular speed. Calculate its angular acceleration.
*October 4, 2012 by Emily *

**physics**

A tire placed on a balancing machine in a service station starts from rest and turns through 4.82 revolutions in 1.48 s before reaching its final angular speed. Calculate its angular acceleration
*October 7, 2012 by Emily *

**Physics**

A person is riding a bicycle, the wheels of a bicycle have an angular velocity of +18.5 rad/s. Then, the brakes are applied. In coming to rest, each wheel makes an angular displacement of +14.5 revolutions. (a) How much time does it take for the bike to come to rest? 1 s (b) ...
*February 22, 2011 by Lauren*

**science , physics**

A person is riding a bicycle, and its wheels have an angular velocity of +15.5 rad/s. Then, the brakes are applied and the bike is brought to a uniform stop. During braking, the angular displacement of each wheel is +15.5 revolutions. (a) How much time does it take for the ...
*November 3, 2010 by Anonymous*

**physics**

The balance wheel of a watch oscillates with angular amplitude 1.7π rad and period 0.64 s. Find (a) the maximum angular speed of the wheel, (b) the angular speed of the wheel at displacement 1.7π/2 rad, and (c) the magnitude of the angular acceleration at ...
*January 9, 2011 by kylie*

**Physics**

(a) Calculate the linear acceleration of a car, the 0.280 m radius tires of which have an angular acceleration of 15.0 rad/s2. Assume no slippage. (m/s2) (b) How many revolutions do the tires make in 2.50 s if they start from rest? (rev) (c) What is their final angular ...
*June 29, 2014 by Michelle*

**Physics**

A bicycle starts at the origin of a circular track that has a circumference of 126 m and travels at a constant speed a distance s = 38.0 m in a time t = 12s. a)what is the angular displacement (in rad) of the bicycle from its starting position? r=20.1 so theta or angular ...
*April 16, 2007 by Anderson*

**Physics(Please help)**

A dentist causes the bit of a high-speed drill to accelerate from an angular speed of 1.44 x 104 rad/s to an angular speed of 5.05 x 104 rad/s. In the process, the bit turns through 1.77 x 104 rad. Assuming a constant angular acceleration, how long would it take the bit to ...
*June 7, 2012 by Hannah*

**physics**

if the angular quantities theta omega and angular acceleration were specified in terms of degrees rather than radians how would the kinematics equations for uniformly accelerated rotational motion have to be altered
*February 28, 2011 by luna*

**physics**

After fixing a flat tire on a bicycle you give the wheel a spin. (a) If its initial angular speed was 5.41 rad/s and it rotated 13.7 revolutions before coming to rest, what was its average angular acceleration?
*November 5, 2010 by aok*

**physics, bike**

After fixing a flat tire on a bicycle you give the wheel a spin. Its initial angular speed was 6.50 and it rotated 15.2 revolutions before coming to rest.What was its average angular acceleration?
*January 13, 2011 by john*

**physics**

if the angular quantities theta omega and angular acceleration were specified in terms of degrees rather than radians how would the kinematics equations for uniformly accelerated rotational motion have to be altered
*February 28, 2011 by luna*

**Physics - Angular Momentum**

When the angular momentum changes, the 'change' in the angular momentum vector (ie. dL) is ____. [a.] perpendicular to the torque vector. [b.] parallel to the angular momentum vector. [c.] parallel to the torque vector. .. im confused on this one.. i think it's [A]. am i right...
*April 8, 2007 by COFFEE*

**physics**

A rotating wheel requires 5.00 s to rotate 30.0 revolutions. Its angular velocity at the end of the 5.00 s interval is 100.0 rad/s. What is the constant angular acceleration of the wheel?
*July 6, 2008 by Elisa*

**Physics**

a turntable is designed to acquire an angular velocity of 38.6 rev/s in 0.5 s, starting from rest. Find the average angular acceleration of the turntable during the 0.5 s period.
*November 23, 2010 by Anonymous*

**PHYSICS**

A fan blade is rotating with a constant angular acceleration of +13.7 rad/s2. At what point on the blade, as measured from the axis of rotation, does the magnitude of the tangential acceleration equal that of the acceleration due to gravity?
*October 28, 2010 by JOHN*

**physics**

A fan blade is rotating with a constant angular acceleration of +8.4 rad/s2. At what point on the blade, as measured from the axis of rotation, does the magnitude of the tangential acceleration equal that of the acceleration due to gravity?
*July 16, 2013 by frank*

**physics**

A figure skater is spinning with an angular velocity of +10 rad/s. She then comes to a stop over a brief period of time. During this time, her angular displacement is +5.8 rad. Determine (a) her average angular acceleration and (b) the time during which she comes to rest.
*October 27, 2014 by david*

**Physics HELP!**

A centrifuge in a medical laboratory rotates at an angular speed of 3500 rev/ min. When switched off, it rotates through 41.0 revolutions before coming to rest. (a) Find the angular speed in rad/s. (b) Find the displacement in radians. (c) Find the constant angular ...
*October 26, 2012 by Mel*

**Re: Physics (check)**

Posted by COFFEE on Friday, March 30, 2007 at 4:16am. A sanding disk with rotational inertia 1.1 x 10^-3 kg*m^2 is attached to an electric drill whose motor delivers a torque of 6 Nm about the central axis of the disk. What are the following values about the central axis at ...
*March 31, 2007 by COFFEE*

**Physics(Please help)**

A fan blade is rotating with a constant angular acceleration of +12.4 rad/s2. At what point on the blade, as measured from the axis of rotation, does the magnitude of the tangential acceleration equal that of the acceleration due to gravity? I do not know how to start this.
*June 5, 2012 by Hannah*

**Physics**

As seen from above, a playground carousel is rotating counterclockwise about its center on frictionless bearings. A person standing still on the ground grabs onto one of the bars on the carousel very close to its outer edge and climbs aboard. Thus, this person begins with an ...
*November 3, 2012 by Sam*

**Physics- Elena please help!!!!**

A centrifuge in a medical laboratory rotates at an angular speed of 3500 rev/ min. When switched off, it rotates through 41.0 revolutions before coming to rest. (a) Find the angular speed in rad/s. (b) Find the displacement in radians. (c) Find the constant angular ...
*October 29, 2012 by Tom*

**physics**

7.A turntable reaches an angular speed of 33.3 rpm, in 2.1 s, starting from rest. (a) Assuming the angular acceleration is constant, what is its magnitude? b How many revolutions does the turntable make during this time interval?
*February 22, 2011 by jimmyjonas*

**physics**

Two objects of equal mass are on a turning wheel. Mass 1 is located at the rim of the wheel while mass 2 is located halfway between the rim and the axis of rotation. The wheel is rotating with a non-zero angular acceleration. For each of the following statements select the ...
*March 20, 2012 by Miriam*

**Physics**

Two objects of equal mass are on a turning wheel. Mass 1 is located at the rim of the wheel while mass 2 is located halfway between the rim and the axis of rotation. The wheel is rotating with a non-zero angular acceleration. For each of the following statements select the ...
*March 21, 2012 by Miriam*

**Physics**

A wheel with rotational inertia I is mounted on a fixed, fricitonless axle. The angular speed w of the wheel is inccreased from zero to w_f in a time interval T. 1: What is the average net torque on the wheel during the time interval, T? a) w_f/T b)w_f/T^2 c) Iw_f^2/T d)Iw_f/T...
*March 25, 2007 by Tammy*

**College Physics**

A turntable reaches an angular speed of 33.3 rpm, in 2.0 s, starting from rest. (a) Assuming the angular acceleration is constant, what is its magnitude? (b) How many revolutions does the turntable make during this time interval?
*September 25, 2009 by Megan*

**Physics help please!!!**

The angular speed of digital video discs (DVDs) varies with whether the inner or outer part of the disc is being read. (CDs function in the same way.) Over a 133 min playing time, the angular speed varies from 570 rpm to 1600 rpm. Assuming it to be constant, what is the ...
*February 18, 2012 by john*

**physics**

What is a tire's angular acceleration if the tangential acceleration at a radius of 0.15 m is 9.4 x 10-2 m/s2?
*March 19, 2012 by Anonymous*

**Physics please check**

A rotating door is made from four rectangular glass panes, as shown in the drawing. The mass of each pane is 88 kg. A person pushes on the outer edge of one pane with a force of F = 53 N that is directed perpendicular to the pane. Determine the magnitude of the door's angular ...
*March 26, 2007 by Jim*

**Physics**

A model airplane with a mass of 0.748 kg is tethered by a wire so that it flies in a circle 30.2 m in radius. The airplane engine provides a net thrust of 0.806 N perpendicular to the tethering wire. (b) Find the angular acceleration of the airplane when it is in level flight...
*November 17, 2010 by Anonymous*

**Physics!**

A wheel rotates with a constant angular acceleration of 3.50 rad/s2. The angular speed of the wheel is 2.00 rad/s at t = 0. If the radius of the wheel is doubled, Are the following statements affected? If so, in what way? (Select all that apply.) (1)The angular speed at t = 2....
*December 1, 2009 by Diane M.*

**physics**

pulsar is a rapidly rotating neutron star that emits radio pulses with precise synchronization, there being one such pulse for each rotation of the star. The period of rotation is found by measuring the time between pulses. At present, the pulsar in the central region of the ...
*March 17, 2008 by shelby*

**Physics**

The angular velocity of a wheel is given by w(t) = (2.00 rad/s^2)t + (1.00 rad/s^4)t^3. A. What is the angular displacement of the wheel from time t=0.00s to time t=T? B.What is the angular acceleration of the wheel as a function of time?
*November 23, 2014 by Larry*

**Physics**

The angular velocity of a wheel is given by w(t) = (2.00 rad/s^2)t + (1.00 rad/s^4)t^3. A. What is the angular displacement of the wheel from time t=0.00s to time t=T? B.What is the angular acceleration of the wheel as a function of time?
*November 23, 2014 by Larry*

**Physics **

At t = 0, a wheel rotating about a fixed axis at a constant angular acceleration of –0.40 rad/s^2 has an angular velocity of 1.5 rad/s and an angular position of 2.3 rad. What is the angular position of the wheel at t = 2.0 s? Ans: Theta final=4.5 rad How do you solve step by ...
*March 31, 2010 by Jared*

**Physics**

A child pushes a merry go-round from rest to a final angular speed of 0.78 rev/s with constant angular acceleration. In doing so, the child pushes the merry-go-round 1.6 revolutions. What is the angular acceleration of the merry go-round? v=d/t .78rev/s = 1.6 rev / t t= 1.6 ...
*February 21, 2012 by Joe*

**Physics**

A rotating wheel requires 8.00 s to rotate 29.0 revolutions. Its angular velocity at the end of the 8.00 s interval is 95.0 rad/s. What is the constant angular acceleration of the wheel? (Do not assume that the wheel starts at rest.)
*November 13, 2012 by Greg*

**Physics**

A cord is wrapped around the rim of a wheel .250 m in radius, and a steady pull of 40.0 N is exerted on the cord. The wheel is mounted on frictionless bearings on a horizontal shaft through its center. The moment of inertia of the wheel about this shaft is 5.00kg*m^2. Compute ...
*March 27, 2007 by Karla*

**Physics**

A flywheel with a diameter of 2.45 m is rotating at an angular speed of 74.1 rev/min. (a) What is the angular speed of the flywheel in radians per second? (b) What is the linear speed of a point on the rim of the flywheel? (c) What constant angular acceleration (in revolutions...
*November 9, 2011 by kyle*

**physics**

A young boy swings a yo-yo horizontally above his head at an angular acceleration of 0.42 rad/s2. If the string is 0.55 m long, what is the tangential acceleration of the yo-yo?
*February 22, 2012 by Anonymous*

**Physics**

A diver performing a double somersault spins at an angular speed of 4.5 π rad/s precisely 0.70s after leaving the platform. Assuming the diver begins with zero initial angular speed and accelerates at a constant rate, what is the diver’s angular acceleration during the ...
*March 28, 2012 by Ethan*

**college physics (inertia)**

As a result of friction, the angular speed of a wheel changes with time according to dθ/dt = ω0 *e^-(σ*t) where ω0 and σ are constants. The angular speed changes from an initial angular speed of 3.08 rad/s to 1.58 rad/s in 3.92 s. a)Determine the ...
*March 30, 2010 by eric*

**college physics (inertia)**

As a result of friction, the angular speed of a wheel changes with time according to dθ/dt = ω0 *e^-(σ*t) where ω0 and σ are constants. The angular speed changes from an initial angular speed of 3.08 rad/s to 1.58 rad/s in 3.92 s. a)Determine the ...
*March 30, 2010 by eric*

**college physics (inertia)**

As a result of friction, the angular speed of a wheel changes with time according to dθ/dt = ω0 *e^-(σ*t) where ω0 and σ are constants. The angular speed changes from an initial angular speed of 3.08 rad/s to 1.58 rad/s in 3.92 s. a)Determine the ...
*March 30, 2010 by eric*

**Physics**

A dentist causes the bit of a high-speed drill to accelerate from an angular speed of 1.20x10^4 rad/s to an angular speed of 3.14x10^4 rad/s. In the process, the bit turns through 1.92x10^4 rad. Assuming a constant angular acceleration, how long would it take the bit to reach ...
*October 23, 2012 by Sam*

**Physics**

A centrifuge takes 100 s to spin up from rest to its final angular speed with constant angular acceleration. If a point located 8.00 cm from the axis of rotation of the centrifuge moves with a speed of 150 m/s when the centrifuge is at full speed, how many revolutions does the...
*June 24, 2012 by Bloom*

**Physics **

A wheel turns through 90.0 revolutions in 15.0 sec. The angular speed at the end of this 15.0 sec period is 10.0 rev/s. Assuming that the angular acceleration is constant, calculate a) the angular speed at the beginning of the 15.0 sec interval, and b) the amount of time that ...
*May 5, 2014 by TP*

**college physics**

The flywheel of a steam engine runs with a constant angular speed of 165 rev/min. When steam is shut off, the friction of the bearings and of the air brings the wheel to rest in 2.30 hrs (a) What is the constant angular acceleration of the wheel, in rev/min2 ? (b) How many ...
*June 8, 2010 by Bami*

**physics**

car has tires of radius 25 cm. The car accelerates from rest at a constant rate of 2.0m/s/s find angular acceleration. find angular displacement. how many revolutions is this?
*November 30, 2010 by Anonymous*

**Physics**

A rotating wheel requires 9.00 s to rotate 29.0 revolutions. Its angular velocity at the end of the 9.00 s interval is 98.0 rad/s. What is the constant angular acceleration of the wheel in radians/second squared? (Do not assume that the wheel starts at rest.)
*November 4, 2010 by Annie*

**Physics**

During a tennis serve, a racket is given an angular acceleration of magnitude 155 rad/s2. At the top of the serve, the racket has an angular speed of 13 rad/s. If the distance between the top of the racket and the shoulder is 1.5 m, find the magnitude of the total acceleration...
*March 26, 2008 by Zach*

**Physics Angular Motion**

A wheel with a radius of 1.5m rotates at uniform angular speed. If a point on the rim of the wheel has a centripetal acceleration of 1.2 m/s/s whats the points tangential speed?
*August 4, 2013 by Xian*

**Physics**

Two identical dragsters, starting from rest, accelerate side by side along a straight track. The wheels have identical angular acceleration. The wheels on one of the cars roll without slipping, while the wheels on the other slip during part of the time...
*April 5, 2008 by James*

**PHYSICS--SHM**

PLZ HELP. THANKS. The balance wheel of a watch oscillates with an angular amplitude of rad and a period of 0.220 s. a) Find the maximum angular speed of the wheel. (b) Find the angular speed of the wheel when its displacement is /4 rad. (c) Find the magnitude of the angular ...
*January 27, 2007 by wooh*

**physics**

a wheel starts from rest and rotates with a constant angular acceleration and reaches an angular speed of 12 rad/sec in 3 sec. find the angle through which it rotates in this time.
*May 3, 2011 by diann*

**physics**

As a result of friction, the angular speed of a wheel changes with time according to d(theta)/dt = w0 e^-(aplpha*t) where w0 and alpha are constants. The angular speed changes from an initial angular speed of 4.87 rad/s to 4.27 rad/s in 33.93s. A) Determine the magnitude of ...
*October 26, 2012 by michelle*

**physics**

The flywheel of a steam engine runs with a constant angular speed of 164 rev/min. When steam is shut off, the friction of the bearings and the air brings the wheel to rest in 1.6 h. I figured out the constant angular acceleration=1.71 rev/min2 but im not sure how to find:What ...
*September 27, 2010 by help*

**Tcc**

What are the magnitudes of (a) the angular velocity, (b) the radial acceleration, and (c) the tangential acceleration of a spaceship taking a circular turn of radius 3220 km at a speed of 29000 km/h?
*April 10, 2014 by Lina*

**biomechanics**

What are the directions and magnitudes of joint reaction forces (both horizontal and vertical) and moments of the KNEE (running)? Data you will need are: Mass of participant: 67.2 kg Running direction: anterior Joint: Knee Segment: Lower Leg Knee coordinates (m) y: 4.207, z: 1...
*July 24, 2014 by biomechanics*

**Physics**

After fixing a flat tire on a bicycle you give the wheel a spin. Its initial angular speed was 7.35 rad/s and it rotated 15.0 revolutions before coming to rest. What was the average angular acceleration? For what length of time did the wheel rotate?
*October 23, 2011 by Jackie*

**Physics**

A car starts from rest and accelerates uniformly to a speed of 50km/h in 18s. If the wheels of the car are 70cm in diameter. Calculate; a.The final angular velocity of the wheels b.angular acceleration
*March 22, 2012 by José*

**physics**

The flywheel of a steam engine runs with a constant angular velocity of 220 rev/min. When steam is shut off, the friction of the bearings and of the air stops the wheel in 2.7 h. (a) What is the constant angular acceleration, in revolutions per minute-squared, of the wheel ...
*March 5, 2008 by greg*

**Physics**

A disc of radius 50.0cm is rotating at 120 rpm, and its angular acceleration is 3.00 rad/s^2. Find the magnitudes of the velocity, v, and tangential acceleration, a, of its outer edge.
*October 9, 2009 by Bill*

Pages: <<Prev | 1 | **2** | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | Next>>