Friday

July 3, 2015

July 3, 2015

Number of results: 34,901

**Physics**

Someone posted the question below, stating that they knew the answer to part A but needed help with part B. Well even with the answer for A, I can't figure it out! Can you take a step back from the question below to show me the steps for solving part A? I've been working on ...
*October 14, 2008 by Anna*

**Check Answers Quick -Physics**

What causes the centripetal acceleration of an electron in a hydrogen atom? electrical attraction gravity friction <-- tension Question 2. Which of the following terms might a jet pilot use to describe a force that presses him against his seat during a high-speed turn? ...
*December 16, 2013 by Greg*

**AP Calc for Reiny **

You did just fine and your second derivative is correct, if you meant (6y^2 - 4x^2)/(9y^3) except they took it a bit further. notice your numerator is -4x^2 + 6y^2 from the original 2x^2 - 3y^2 = 4 , then 4x^2 - 6y^2 = 8 , and -4x^2 + 6y^2 = -8 to get their -8/9y^3 If you were...
*November 6, 2012 by Sanya *

**AP Calc for Reiny**

You did just fine and your second derivative is correct, if you meant (6y^2 - 4x^2)/(9y^3) except they took it a bit further. notice your numerator is -4x^2 + 6y^2 from the original 2x^2 - 3y^2 = 4 , then 4x^2 - 6y^2 = 8 , and -4x^2 + 6y^2 = -8 to get their -8/9y^3 If you were...
*November 6, 2012 by Sanya *

**Physics help--explosion**

Figure 9-56 shows a two-ended "rocket" that is initially stationary on a frictionless floor, with its center at the origin of an x axis. The rocket consists of a central block C (of mass M = 6.00 kg) and blocks L and R (each of mass m = 2.90 kg) on the left and right sides. ...
*December 2, 2006 by fizzix*

**Physics help**

In Millikan's experiment, an oil drop of radius 1.516 µm and density 0.860 g/cm3 is suspended in chamber C (Figure 22-14) when a downward-pointing electric field of 1.92 105 N/C is applied. Find the charge on the drop, in terms of e. (Include the sign.) Calulate the mass of ...
*February 15, 2007 by Frank*

**physics**

Two point charges are placed on the x axis as follows: Charge q1= +4.00 nC is located at x= 0.200 m, and charge q2= +5.00nC is at x= -0.300 m. What are the magnitude and direction of the net force exerted by these two charges on a negative point charge q3= -0.600 nC placed at ...
*January 21, 2008 by Jen*

**accounting**

Which of the following is not one of the steps to follow when preparing a bank reconciliation statement? A. Compare the amounts of deposits in the bank statement with the amounts shown in your accounting records. B. Compare the amounts of canceled checks with the amounts shown...
*May 30, 2008 by himaat*

**physics**

A string is hanging from the rearview mirror of you car and a ball is at the end of this string. Suppose that you drive around a circular track at fixed speed. Which list below gives all the forces that act on the ball? A) tension and the force of gravity b) tension force of ...
*November 23, 2009 by julia*

**Physics help please**

A crate is dragged 5.0 along a rough floor with a constant velocity by a worker applying a force of 125N to a rope at an angle of 30degrees to the horizontal. Calculate the work done by the tension in the rope, the force of friction, and the net force. I know the work don on ...
*December 5, 2013 by K*

**math**

A right circular cylinder of radius r and height h is inscribed in a right circular cone of radius R and height H, as shown on the right figure. Find the value of r (in terms of R and H) that maximizes the total surface area of the cylinder (including top and bottom). Comment ...
*August 11, 2012 by deel*

**physics**

1. a force of 30n with a direction of 35 degrees northwest acts on point p. Find: a) the northward component on the force b) the westward component of the force Please show work. Thanks!
*June 21, 2011 by Molly*

**English**

Please read the following excerpt from an essay, and answer the question that follows. Biologically, adolescence is marked by hormonal changes that produce secondary sexual characteristics. These include breast development in females and beard growth in males. Psychologically...
*March 23, 2015 by Jesica*

**college physics**

a 1.0 N-weight is hanging at rest as shown. In each case, write in the magnitude of the unknown force. a) chain with a weight of 2.5 N has a 1.0 N hanging weight b) chain with a weight of .5 N has a 1.0 N hanging weight c) stretched elastic band with negligible weight has a 1....
*March 8, 2012 by Amber*

**Japanese**

What's the difference between wa and ga? The particle wa indicates that the noun preceding it is the topic of the sentence. In most of the model sentences given, the subject and the topic of each esntecnce coincide; however, the topic may or may not be identical witht the ...
*May 3, 2007 by Ashley*

**physics**

A block of mass 2.50 kg is pushed 2.80 m along a frictionless horizontal table by a constant 12.0 N force directed 25.0° below the horizontal. (a) Determine the work done by the applied force. J (b) Determine the work done by the normal force exerted by the table. J (c) ...
*October 10, 2012 by monic*

**physics**

A block of mass 2.50 kg is pushed 2.80 m along a frictionless horizontal table by a constant 12.0 N force directed 25.0° below the horizontal. (a) Determine the work done by the applied force. J (b) Determine the work done by the normal force exerted by the table. J (c) ...
*October 12, 2012 by monic*

**word problem**

a computer company gives a discount of 10% on a new piece of software.If it makes a 40% profit what percentage does the marked price exceed the cost price
*February 5, 2011 by jeff *

**math**

Jim bought two shirts that were originally marked at $40 each. Once shirt was discounted 20% and the other was discounted 25%. The sales tax was 4.5%. How much did he spend in all?
*March 7, 2011 by Tanesha*

**Physics :(( help please TT**

A source of ions at point O produces a slightly diverging beam with half-angle of divergence α0≪1. In order to collimate (re-focus) the beam, one can apply a uniform magnetic field along the z-axis (see the figure below). If all the ions have the same initial ...
*April 16, 2013 by OIan*

**math (geometry)**

It says: Find the area of a rectangle with length 12 inscribed in a circle with radius 7.5. I know when they're talking about a radius with a figure, they're talking about the length between the center of the circle to a corner of the figure. But that usually works only with a...
*March 16, 2008 by Emily*

**physics**

two girls exeret a force of 30 N and 10 N on a bag in same direction. a dog tugs at bag and drag it in oppsite direction with the force of 5 N. calculate the new force exerted on bag and draw a vector diagram. F= 10+30 = 40 N dog applied force in opposite direction with 5 N ...
*December 21, 2014 by ruby*

**algebra**

Could someone show me how to solve this joint variation problems? Y varies jointly as x and y and inversely as w. Write the appropriate combined variation equation and find z for the given values of x, y and w. z=15 when x equals three, y equals four, and w equals nine, x ...
*December 8, 2008 by Juliette*

**physics**

Two 2.3 kg balls are attached to the ends of a thin rod of negligible mass, 65 cm in length. The rod is free to rotate in a vertical plane about a horizontal axis through its center. With the rod initially horizontal as shown, a 44 gm wad of wet putty drops onto one of the ...
*November 16, 2010 by Putty wad*

**Physics**

30. A truck of mass 2250 kg is used to pull a 330 kg trunk out of an old quarry as shown below. There is 550 N of rolling resistance for the truck. Ignore mass and friction of the pulley. (a) If the trunk is accelerated upward at 2.00 m/s2 what is the minimum amount of ...
*October 19, 2012 by Liz*

**Math 7 - Homework Question Check **

12. Is the figure below a right triangle? On the lines below, explain how you determined your answer. Answer - The figure below is not a right triangle. The reason why it's not a right triangle is because this figure is a acute angle. Acute angle is less than 90 degrees and ...
*April 16, 2012 by Laruen *

**Physics**

As shown in the figure below, cars #1 and #2 are sliding across a horizontal frictionless surface. The cars are equipped with a coupling arrangement similar to the one on railroad cars. Car #1 overtakes car #2 and they have a totally inelastic collision and become coupled ...
*January 12, 2015 by Anonymous*

**Physics**

A man is pulling on a rope with a force of 97 N directed at an angle of 68 degrees to the horizontal. What is the x-component of this force? What is the y-component of this force?
*September 11, 2011 by Milan*

**Trig**

Force 1= 65 pounds , Force 2=90 pounds find the angle between the forces? magnitude of the resultant force= 70lbs
*April 16, 2014 by Anonymous*

**physics**

The leg and cast in the figure below weigh 260 N, with the center of mass as indicated by the blue arrow in the diagram. The counterbalance w1 weighs 125 N. Determine the weight w2 AND the angle α needed so that no force is exerted on the hip joint by the leg plus cast.
*September 27, 2010 by K*

**physics**

The leg and cast in the figure below weigh 260 N, with the center of mass as indicated by the blue arrow in the diagram. The counterbalance w1 weighs 125 N. Determine the weight w2 AND the angle α needed so that no force is exerted on the hip joint by the leg plus cast.
*September 27, 2010 by K*

**science**

When you first release the contraption and the egg, the force of gravity is pulling on the egg as it going to the ground. Which the force of the air resistance is trying to push up on the egg. The net force of the falling egg is equal to the air resistance. As the speed is ...
*April 13, 2010 by Anonymous*

**Chemistry**

Im having trouble on a question Im not sure what it is they are asking for. A voltaic cell similar to that shown in Figure 20.5 is constructed. One electrode compartment consists of a silver strip placed in a solution of AgNO3, and the other has a iron strip placed in a ...
*May 10, 2011 by Hannah*

**Physics**

Two blocks of masses m1 = 2.00 kg and m2 = 3.70 kg are each released from rest at a height of h = 5.60 m on a frictionless track, as shown in the figure below, and undergo an elastic head-on collision. (Let the positive direction point to the right. Indicate the direction with...
*October 29, 2012 by Jessica*

**Physics**

Two blocks of masses m1 = 2.00 kg and m2 = 3.70 kg are each released from rest at a height of h = 5.60 m on a frictionless track, as shown in the figure below, and undergo an elastic head-on collision. (Let the positive direction point to the right. Indicate the direction with...
*October 29, 2012 by Jessica*

**physics**

The system shown in the figure below consists of a m1 = 5.52-kg block resting on a frictionless horizontal ledge. This block is attached to a string that passes over a pulley, and the other end of the string is attached to a hanging m2 = 2.76-kg block.The pulley is a uniform ...
*March 24, 2013 by Nicole*

**physics**

The system shown in the figure below consists of a m1 = 5.52-kg block resting on a frictionless horizontal ledge. This block is attached to a string that passes over a pulley, and the other end of the string is attached to a hanging m2 = 2.76-kg block.The pulley is a uniform ...
*March 24, 2013 by Nicole*

**physics**

The system shown in the figure below consists of a m1 = 5.52-kg block resting on a frictionless horizontal ledge. This block is attached to a string that passes over a pulley, and the other end of the string is attached to a hanging m2 = 2.76-kg block.The pulley is a uniform ...
*March 24, 2013 by Nicole*

**physics**

The system shown in the figure below consists of a m1 = 5.52-kg block resting on a frictionless horizontal ledge. This block is attached to a string that passes over a pulley, and the other end of the string is attached to a hanging m2 = 2.76-kg block.The pulley is a uniform ...
*March 24, 2013 by Nicole*

**physics**

The system shown in the figure below consists of a m1 = 5.52-kg block resting on a frictionless horizontal ledge. This block is attached to a string that passes over a pulley, and the other end of the string is attached to a hanging m2 = 2.76-kg block.The pulley is a uniform ...
*March 24, 2013 by Nicole*

**physics**

The system shown in the figure below consists of a m1 = 5.52-kg block resting on a frictionless horizontal ledge. This block is attached to a string that passes over a pulley, and the other end of the string is attached to a hanging m2 = 2.76-kg block.The pulley is a uniform ...
*March 24, 2013 by Nicole*

**Economics**

Graph A New Equilibrium: Y axis represents Quantity (hours per semester) 0, 25, 50, 75, 100, 125, 150 X axis represents Price of Tutoring (per hour) 0, 5, 10, 15, 20, 25, 30, 35, 40, 45, $50 Question: Determine the approximately size of market surplus or shortage that would ...
*November 4, 2012 by Sanford*

**calculus**

Find the volume of the solid generated by revolving the region about the given line. The region in the second quadrant bounded above by the curve y = 16 - x2, below by the x-axis, and on the right by the y-axis, about the line x = 1 I have gathered, that washer method is to be...
*April 12, 2013 by Tiffany*

**Physics**

Vector A has a magnitude of 18 (in some unspecified units) and makes an angle of 25 with the x axis, and a vector B has a length of 24 and makes an angle of 70 with the x axis. Find the components of the vector C in the following: (a) C = A + B Cx = Cy = (b) C = A - B Cx= Cy=
*August 25, 2011 by Logan*

**Physics**

A long wire carries a current of 20 A along the directed axis of a long solenoid. The field due to the solenoid is 4 mT. Find the field at a point 3 mm from the solenoid axis.
*December 12, 2012 by Maryam*

**Physics**

A long wire carries a current of 20 A along the directed axis of a long solenoid. The field due to the solenoid is 4 mT. Find the field at a point 3 mm from the solenoid axis.
*December 12, 2012 by Maryam*

**Parabola ques**

the normal to a parabola y^2=4ax at the point t,where t is not 0 meets the curve again at the point t'.find t' in terms of t.determine a point on the x-axis where the tangent at t' meets the x-axis.
*January 25, 2015 by Shanu*

**Physics**

I got two questions Three blocks on a fricitonless horizontal surface are in contact with each other a force F is applied to block 1 mass m1 Draw a free body diagram for each block ok done the accelration of the system (in terms of m1, m2, and m3) ok done I got a = (m1 + m2 + ...
*July 12, 2009 by Physics*

**mitx**

Consider a flat plate in a supersonic flow at an angle of attack as shown in the figure above, and assume the flow is inviscid. We will learn later in the course that the resulting flow is such that the pressure is uniform on both the upper surface and lower surface of the ...
*September 29, 2013 by Anonymous*

**college level physics**

a 40 kg skier skis down a frictionless slope angled at 10 degrees to the horizontal. Assume the skier moves in the negative direction of an x axis along the slope. A wind force with component Fx acts on the skier. What is Fx is the magnitude of the skier's velocity is (a) ...
*October 19, 2008 by jane*

**Chemistry**

What is the likely source of error from reading a graph where the absorbance (y-axis) versus concentration (x-axis) shows non-deal behaviour. The graph is going in what looks like a line of best fit but then curves off a the end. At the end of the graph there is a curve and it...
*March 27, 2012 by Ellen*

**physics**

A uranium nucleus 238U may stay in one piece for billions of years, but sooner or later it decays into an a particle of mass 6.64×10^−27 kg and 234Th nucleus of mass 3.88 × 10^−25 kg, and the decay process itself is extremely fast(it takes about 10^−20 s). ...
*January 16, 2010 by Anonymous*

**physics**

Lauren was driving north on Hwy 75 with a speed of 46.7 m/s when she heard on a CB that a patrolman was hiding 112.7 m north of where she is. Knowing that the patrolman can start clocking the car in 2.9 seconds, Lauren decided to slow to 27.5 m/s. and immediately pressed on ...
*September 2, 2011 by Jeon*

**Physics**

Paleontologists estimate that if a Tyrannosaurus rex were to trip and fall, it would have experienced an upward normal force of approximately 261,100 N acting on its torso when it hit the ground. Assume the torso has a mass of 3700 kg. Assuming the torso is in free fall for a ...
*January 18, 2010 by Robert C*

**physical science**

An input force of 20 newtons is applied to a lever at a distance of 2 meters from the fulcrum. An object 0.5 m away from the fulcrum (and on the other side) is lifted by the 20-N force. What is the output force? A. 10 N B. 20 N C. 40 N D. 80 N
*June 16, 2015 by tetianna*

**Physics**

Three identical masses of 700 each are placed on the x axis. One mass is at = -100 , one is at the origin, and one is at = 370 . What is the magnitude of the net gravitational force on the mass at the origin due to the other two masses? Take the gravitational constant to be = ...
*February 7, 2013 by Tamar*

**algebra**

Solve. Leave the answers in terms of pi ?. a)Find a polynomial for the sum of the areas of the circles shown in the figure. b)Find the sum of the areas when r = 5 and r = 11.3. this is what I got but I did not do it right. I needed to To write an expression for the sum, i need...
*July 20, 2012 by Anna*

**algebra**

Solve. Leave the answers in terms of pi ?. a)Find a polynomial for the sum of the areas of the circles shown in the figure. b)Find the sum of the areas when r = 5 and r = 11.3. this is what I got but I did not do it right. I needed to To write an expression for the sum, i need...
*July 21, 2012 by Anna*

**physics**

3. Calculate the magnitude of the force required to cause an anterior dislocation of the glenohumeral joint given that he force has a lever arm of 52 cm, the maximum magnitude of the resistance force is 1080 N and the resistance force has a lever arm of 4.3 cm.
*December 5, 2012 by dmkp*

**physics**

3. Calculate the magnitude of the force required to cause an anterior dislocation of the glenohumeral joint given that he force has a lever arm of 52 cm, the maximum magnitude of the resistance force is 1080 N and the resistance force has a lever arm of 4.3 cm.
*December 5, 2012 by dmkp*

**physics**

Calculate the magnitude of the force required to cause an anterior dislocation of the glenohumeral joint given that he force has a lever arm of 52 cm, the maximum magnitude of the resistance force is 1080 N and the resistance force has a lever arm of 4.3 cm.
*December 7, 2012 by dmkp*

**biomechanics**

Calculate the magnitude of the force required to cause an anterior dislocation of the glenohumeral joint given that he force has a lever arm of 52 cm, the maximum magnitude of the resistance force is 1080 N and the resistance force has a lever arm of 4.3 cm.
*December 12, 2012 by dmkp*

**physics**

3. Calculate the magnitude of the force required to cause an anterior dislocation of the glenohumeral joint given that he force has a lever arm of 52 cm, the maximum magnitude of the resistance force is 1080 N and the resistance force has a lever arm of 4.3 cm.
*February 8, 2015 by kkuh*

**Physics**

A 2.42kg block starts from rest at the top of a 22.9◦ incline and accelerates uniformly down the incline,moving 2.41m in 2.14s. The acceleration of gravity is 9.81m/s2. a) What is the magnitude of the acceleration of the block? Answer in units of m/s2 b) What is the coe...
*October 21, 2012 by Alex*

**Physics**

we have a test coming up and I cannot figure out the practice question. Can somebody please help? Aaron throws a 7.5 kg bowling ball by applying a 45 N force for a time of 0.90seconds. What is the impulse Aaron applies to the ball? What is the ball's speed at the end of this ...
*June 21, 2013 by Amalia*

**Physics **

a 1.0 N-weight is hanging at rest as shown. In each case, write in the magnitude of the unknown force. a) chain with a weight of 2.5 N has a 1.0 N hanging weight b) chain with a weight of .5 N has a 1.0 N hanging weight c) stretched elastic band with negligible weight has a 1....
*March 11, 2012 by Brandon *

**physics**

In the figure below, a constant force of magnitude 82.0 N is applied to a 2.55 kg shoe box at angle = 64.5°, causing the box to move up a frictionless ramp at constant speed. How much work is done on the box by a when the box has moved through vertical distance h = 0.180 m?
*October 14, 2012 by Anonymous*

**physics**

Rotating blade (body force in axial loading) blade is fixed to a rigid rotor of radius R spinning at ω rad/sec around the vertical z-axis. Neglect the effects of gravity. Calculate the peak stress in the blade: σmaxn Calculate the blade elongation: δ Calculate ...
*May 3, 2013 by rka*

**Physics**

Halley’s comet orbits the Sun with a period of 76.2 years. a) Find the semi-major axis of the orbit of Halley’s comet in astronomical units (1 AU is equal to the semi-major axis of the Earth’s orbit Physics - drwls, Thursday, May 5, 2011 at 8:51am There is a simple form of ...
*May 5, 2011 by Reese*

**Physics**

Astrology, that unlikely and vague pseudoscience, makes much of the position of the planets at the moment of one’s birth. The only known force a planet exerts on objects on Earth is gravitational. (a) Calculate the gravitational force exerted on a 4.20 kg baby by the Earth. (b...
*June 8, 2014 by Anonymous*

**Chem**

Please tell me if these are right? A mixture of oxygen and helium is prepared for a scuba diver that will descend to 125 feet below the ocean surface. At that depth the diver breathes a gas mixture that has a total pressure of 8atm. If the particle pressure of the oxygen in ...
*November 29, 2010 by Lindsay*

**Calculus Help!!**

Region R is bounded by the functions f(x) = 2(x-4) + pi, g(x) = cos^-1(x/2 - 3), and the x axis. a. What is the area of the region R? b. Find the volume of the solid generated when region R is rotated about the x axis. c. Find all values c for f(x) and g(x) in the closed ...
*December 21, 2012 by Anonymous*

**Physics**

A motorbike starts from rest at time t=0 and begins to accelerate around a circular track as shown in the figure below. Eventually, at time t=t1 the motorbike reaches the maximum velocity possible without slipping off the track. What's the minimum length in meters the ...
*May 6, 2013 by Mathslover Please help*

**Physics help**

A motorbike starts from rest at time t=0 and begins to accelerate around a circular track as shown in the figure below. Eventually, at time t=t1 the motorbike reaches the maximum velocity possible without slipping off the track. What's the minimum length in meters the ...
*May 8, 2013 by Mathslover Please help*

**math**

A figure is transformed into a new figure by being rotated 180 degrees, translated left 6 units, and dilated by a factor of 4. How are the old and new figures related? a)both congruent and similar b)congruent but not similar c)similar but not congruent d)neither similar and ...
*January 31, 2008 by robert*

**physics**

TV-reception antennas for VHF (channels 2 through 13) are constructed with cross wires supported at their centers, as shown in Figure 23.24. The ideal length for the cross wires is one-half the wavelength to be received, with the more expensive antennas having one for each ...
*May 29, 2012 by Amelia*

**Math-trig**

A stairway runs up the edge of the pyramid. From bottom to top the stairway is 92 m long. The stairway makes an angle of 70° to the base edge, as shown. A line from the middle of one of the base edges to the top of the pyramid makes an angle of elevation of 52° with respect to...
*December 19, 2012 by Anonymous*

**maht,correction**

Find the area of the rectangle shown in the figure. length = radical (3) + radical (5) width = radical (3) + radical (5) My answer: a= 8 + 2 radical (15) or a = 15.75 agree, you seem to be able to do these should i leave it as the radical form or the decimal form which is more...
*March 21, 2007 by jasort20*

**physics**

A tug of war has started over a popular toy. One child pulls with a force of 2.0*10^1 N[W], a second child pulls with a force of 15N[N] and a third child pulls with a force of 4.0*10^1 N [30 S of E] calculate the net force on the toy
*April 5, 2012 by Melissa*

**samoana high school**

phoebe physics pulls a wagon with a force of 80 N. a) what is the net force of friction between the wagon and the ground is 12 N. b) if she uses 80 N to pull the wagon through a med puddle, and the net force on the wagon is 38 N, what friction force asts on the wagon?
*January 12, 2015 by davina*

**physics(URGENT)**

An airliner makes an emergency landing with its nose wheel locked in a position perpendicular to its normal rolling position. The forces acting to stop the airliner arise from friction due to the wheels and from the breaking effort of the engines in reverse thrust mode. The ...
*November 2, 2013 by anonymous*

**FIRST GRADE GRAMMER**

I AM HELPING MY DAUGHTER WITH HER HOMEWORK AND THE TEACHER MARKED HER ANSWERS WRONG. I WANT TO SEE IF SHE IS CORRECT. WHAT WOULD THE 2 ADJECTIVES BE IN (BROOKE, BRUCE AND ELSIE ALL RIDE THE SAME BUS.)
*January 15, 2008 by MEGAN*

**African Amer. Study**

Who led the most forceful strategy in order to bring an end to slavery? I wrote William Lloyd Garrison on my test and my teacher marked it wrong. I need help with this one.
*January 29, 2008 by Mack*

**general chem**

identify the 2 substances whose aqueous solutions have common properties to a marked degree and explain your answer. a) CuS, CuCI2, Na2 S, KCI b) HCI, HC2H3O2, NH4C2H3O2
*September 29, 2010 by amber*

**3rd grade math**

Where did i find word problems specially for number rounding, I also need the methods and answers, because teacher marked compleatly wrong, for what i taught to kid. Can any body help please
*October 12, 2014 by kk*

**Physics**

A 2.9-kg 12-cm-radius cylinder, initially at rest, is free to rotate about the axis of the cylinder. A rope of negligible mass is wrapped around it and pulled with a force of 20 N. (a) Find the magnitude of the torque exerted by the rope. (b) Find the angular acceleration of ...
*November 9, 2011 by Kayla*

**Physics gravity**

A thin spherical shell has a radius of 2.4 m and a mass of 410 kg, and its center is located at the origin of a coordinate system. Another spherical shell with a radius of 1 m and mass 135 kg is inside the larger shell with its center at 0.6 m on the x axis. What is the ...
*April 8, 2013 by Chel*

**Math...Help.Thx**

20. READING: The number of pages P a student can read varies directly with the amount of time T in minutes spent reading. The student can read 90 pages in 60 minutes. Write an equation that relates P and T. PREDICT the number of pages the student can read if 90 minutes is ...
*September 9, 2014 by Jake*

**PRE-CALC HELP **

A communications tower is located at the top of a steep hill, as shown. The angle of inclination of the hill is 58°. A guy wire is to be attached to the top of the tower and to the ground, 150 m downhill from the base of the tower. The angle α in the figure is determined ...
*November 8, 2013 by JOHN *

**Physics**

Block A of mass 4.0 kg is on a horizontal, frictionless tabletop and is placed against a spring of negligible mass and spring constant 650 N m. The other end of the spring is attached to a wall. The block is pushed toward the wall until the spring has been compressed a ...
*September 19, 2010 by Joe*

**Physics Help Please!!!!**

A car is at rest on a horizontal road. What is the value of the frictional force? Explain your answer. A bison stands at rest on the horizontal ground. What is the value of the frictional force? Explain. The normal force always has a direction perpendicular to the surface that...
*October 9, 2014 by Tom*

**economics**

I really have to figure out the answers to these questions and i dont know where to start. I dont know how to draw the marginal benefit and marginal cost curves for this question. a.Sketch a marginal benefit and marginal cost diagram, with “billions of units of security per ...
*September 15, 2006 by G*

**magnetism **

In earlier learning sequences we described how a static magnetic field cannot change the speed (and therefore kinetic energy) of a free charged particle. A changing magnetic field can, and this is one way particle beams are accelerated. Consider free protons following a ...
*December 3, 2013 by manu*

**eletromagnets**

In earlier learning sequences we described how a static magnetic field cannot change the speed (and therefore kinetic energy) of a free charged particle. A changing magnetic field can, and this is one way particle beams are accelerated. Consider free protons following a ...
*December 5, 2013 by BJ*

**physics**

In earlier learning sequences we described how a static magnetic field cannot change the speed (and therefore kinetic energy) of a free charged particle. A changing magnetic field can, and this is one way particle beams are accelerated. Consider free protons following a ...
*December 5, 2013 by J.O*

**physics**

A uranium nucleus 238U may stay in one piece for billions of years, but sooner or later it decays into an a particle of mass 6.64×10−27 kg and 234Th nucleus of mass 3.88 × 10−25 kg, and the decay process itself is extremely fast(it takes about 10−20 s). ...
*January 16, 2010 by Anonymous*

**physics**

A man is pulling on a rope with a force of 88N directed t an angle or 20 degrees to the horizontal. What is the x component of this force? What is the Y component of this force? Answer in units of N This is what i did, but i dont know if its right: x: cos(20)88=82.69 N y: tan(...
*July 2, 2011 by alexa*

**Physics**

A 100kg trolley is being pushed up a rough 30Â° incline by a constant force. The friction force between the incline and the trolley is 110N. (a) Determine thd value of the constant force that will move the trolley up the incline at a constant velocity of 5m/s. (b) Find the ...
*September 7, 2014 by Slavh*

**physics**

The two masses in the Atwood's machine shown in the figure are initially at rest at the same height. After they are released, the large mass, , falls through a height and hits the floor, and the small mass, , rises through a height . Find the speed of the masses just before ...
*July 1, 2010 by meera*

**Physics**

Halley’s comet orbits the Sun with a period of 76.2 years. a) Find the semi-major axis of the orbit of Halley’s comet in astronomical units (1 AU is equal to the semi-major axis of the Earth’s orbit Physics - drwls, Thursday, May 5, 2011 at 8:51am There is a simple form of ...
*May 5, 2011 by Reese*