# One 3.2 kg paint bucket is hanging by a massless cord from another 3.2 kg paint bucket, also hanging by a massless cord, as shown in Fig. 4-44. Figure 4-44

83,663 results

**Physics**

One 3.30 kg paint bucket is hanging by a massless cord from another 3.30 kg paint bucket, also hanging by a massless cord, as shown in figure below. If the two buckets are pulled upward with an acceleration of 1.57 m/s by the upper cord, calculate the tension in the lower cord...

**Physics**

One 2.5 kg paint bucket is hanging by a massless cord from another 2.5 kg paint bucket, also hanging by a massless cord, as shown in Fig. 4-44. (a) If the buckets are at rest, what is the tension in each cord? (lower cord)________ N (upper cord)________ N (b) If the two ...

**physics help plz**

One 3.5 kg paint bucket is hanging by a massless cord from another 3.5kg paint bucket, also hanging by a massless cord, as shown in the figure . Part a) If the buckets are at rest, what is the tension in lower and higher cord ? Part b)If the two buckets are pulled upward with ...

**Physics**

So I got a question One 3.5-kg paint bucket is hanging by a massless cord from another 3.5-kg pain bucket, aslo hanging by a massless cord if the buckets are at rest, what is the tension in each cord? How do I do this is this just the normal or what I do not understand how you...

**Physics 30**

One 3kg paint bucket is hanging by a massless cord from another 3kg pain bucket, also hanging by a massless cord. a) If the buckets are at rest, what is the tension in each cord? b) If the buckets are pulled upward with an acceleration of 2.6 m/s^2 by the upper cord, calculate...

**Physics**

I posted this question earlier and I still don't get it So I got a question One 3.5-kg paint bucket is hanging by a massless cord from another 3.5-kg pain bucket, aslo hanging by a massless cord if the buckets are at rest, what is the tension in each cord? How do I do this is ...

**Physics**

A block of mass m1 = 6.25 kg on a frictionless plane inclined at angle θ = 30.7° is connected by a cord over a massless, frictionless pulley to a second block of mass m2 = 2.36 kg hanging vertically (Fig. 5-52). (a) What is the acceleration of the hanging block (choose ...

**physics**

A block of mass m1 = 3.08 kg on a friction less plane inclined at angle θ = 32.3° is connected by a cord over a massless, frictionless pulley to a second block of mass m2 = 2.51 kg hanging vertically (see the figure). (a) What is the acceleration of the hanging block (...

**physics**

A block of mass m1 = 3.56 kg on a frictionless plane inclined at angle θ = 34.1° is connected by a cord over a massless, frictionless pulley to a second block of mass m2 = 2.72 kg hanging vertically (see the figure). (a) What is the acceleration of the hanging block (...

**physics**

an initially resting 300g car is dragged along a horizontal frictionless table by a massless cord. The cord is attached to vertically hanging 60g mass by a frictionless massless pulley. If the car starts from rest, determine the time it would take for it to move 20 cm.

**PHY1610-2520**

an initially resting 300g car is dragged along a horizontal frictionless table by a massless cord. The cord is attached to vertically hanging 60g mass by a frictionless massless pulley. If the car starts from rest, determine the time it would take for it to move 20 cm.

**physics**

A 5.50 bucket of water is accelerated upward by a cord of negligible mass whose breaking strength is 77.0 . If the bucket starts from rest, what is the minimum time required to raise the bucket a vertical distance of 14.0 without breaking the cord?

**physics**

A 4.00 bucket of water is accelerated upward by a cord of negligible mass whose breaking strength is 78.0 . If the bucket starts from rest, what is the minimum time required to raise the bucket a vertical distance of 10.0 without breaking the cord?

**physics**

A 5.30kg bucket of water is accelerated upward by a cord of negligible mass whose breaking strength is 76.0N .If the bucket starts from rest, what is the minimum time required to raise the bucket a vertical distance of 14.0m without breaking the cord?

**physics**

A block (mass = 2.9 kg) is hanging from a massless cord that is wrapped around a pulley (moment of inertia = 1.2 x 10-3 kg·m2), as the figure shows. Initially the pulley is prevented from rotating and the block is stationary. Then, the pulley is allowed to rotate as the block...

**math**

A bucket of paint holds 3 1/2 gallons of paint. Marci uses 2/3 of a bucket of paint. How many gallons of paint does she use?

**college physics**

You are on a ladder painting your house. You accidentally drop a bucket of paint weighing 10lb from a height of 17ft. With what speed do the paint and bucket hit the rose bushes below? Would it be different if you dropped your paintbrush weighing 1/2 lb instead? b) what color ...

**Physic**

A block (mass 2.4 kg) is hanging from a massless cord that is wrapped around a pulley -3 2 (moment of inertia of the pulley = 1.3 x 10 kg·m ), as the drawing shows. Initially the pulley is prevented from rotating and the block is stationary. Then, the pulley is allowed to ...

**Physics**

A solid, uniform, frictionless cylindrical reel of mass M = 3.00 kg and radius R = 0.400 m is used to draw water from a well.? A bucket of mass m = 2.00kg is attached to a cord that is wrapped around the cylinder. (a) Find the tension T in the cord and acceleration a of the ...

**Physics**

A string (A) hanging from the ceiling has a 1 kg mass attached to it and hanging below this mass is string (B) with a 2 kg mass attached. Both of the strings are massless. How do I calculate the tension in Cord B? I have tried several times with different snwers. Please help ...

**physics**

A string (A) hanging from the ceiling has a 1 kg mass attached to it and hanging below this mass is string (B) with a 2 kg mass attached. Both of the strings are massless. How do I calculate the tension in Cord B?

**Physics**

A block of mass M1 = 160.0 kg sits on an inclined plane and is connected to a bucket with a massless string over a massless and frictionless pulley. The coefficient of static friction between the block and the plane is ms = 0.52, and the angle between the plane and the ...

**physics**

A block of mass m1=3.70kg on a frictionless plane inclined at angle 30 deg is connected by a cord over a massless, frictionless pulley to a second block mass m2= 2.30kg. What is... a) The magnitude of the acceleration of each block? b) The direction of the acceleration of the ...

**physics**

consider a massless cord attached at both ends to hooks in a ceiling. A 20 kg mass is then suspended from the first cord by a second cors. The angles made by the cord with the ceiling are 40 degrees (left angle) and 25 degrees (right angle). Find the tension in each cord. I ...

**physics**

A mobile is constructed from a thin rod of mass 50 g and length 50 cm. Two hanging masses are positioned at each end of the rod. The mass of one of the hanging masses is 100 g. What must be the mass of the other hanging mass so that the mobile is in static equilibrium with the...

**physics**

A mobile is constructed from a thin rod of mass 50 g and length 50 cm. Two hanging masses are positioned at each end of the rod. The mass of one of the hanging masses is 100 g. What must be the mass of the other hanging mass so that the mobile is in static equilibrium with the...

**Algebra 1**

Buying paint in large quantities is often less expensive. Five 1-gallon buckets cost 25% more than a single 5-gallon bucket. Suppose that a job requires g gallons of paint. For what values of g should a 5-gallon bucket be purchased to minimize cost? Explain.

**physics**

A system has three masses, a 10kg mass is lying on a level surface and is connected on the left to a 6kg mass by a cord passing over a massless,frictionless pulley.And on the right, it is connected to a 9kg mass by a cord also passing over a frictionless,massless pulley. The ...

**Physics**

Consider the diagram of the box and bucket. If the coefficient of static friction is 0.5 and the coefficient of kinetic friction is 0.3, find the maximum mass of the bucket in order for the system to be in static equilibrium. If the block was given a slight nudge to get it ...

**Physics (76)**

the weight of the block on the table is 422 N and that of the hanging block is 185 N. Ignoring all frictional effects and assuming the pulley to be massless, find (a) the acceleration of the two blocks and (b) the tension in the cord.

**physics homework 7 :)**

The weight of the block on the table is 422 N and that of the hanging block is 185 N. Ignoring all frictional effects and assuming the pulley to be massless, find (a) the acceleration of the two blocks and (b) the tension in the cord.

**physics**

consider a massless cord attached at both ends to hooks in a ceiling. A 20 kg mass is then suspended from the first cord by a second cors. The angles made by the cord with the ceiling are 40 degrees (left angle) and 25 degrees (right angle). Find the tension in each cord. I ...

**Physics**

In the figure below, assume that the slope is frictionless and that the two blocks are connected by a massless cord. Assume the following: θ1 = 37° θ2 = 45° m1=3kg m2=0.86kg. What is the tension in the cord?.

**Physics**

In the drawing, the weight of the block on the table is 430 N and that of the hanging block is 165 N. Ignore all frictional effects, and assuming the pulley to be massless. (a) Find the acceleration of the two blocks. (b) Find the tension in the cord.

**Physics**

In the drawing, the weight of the block on the table is 384 N and that of the hanging block is 195 N. Ignore all frictional effects, and assuming the pulley to be massless. (a) Find the acceleration of the two blocks. m/s2 (b) Find the tension in the cord.

**Physics**

In the drawing, the weight of the block on the table is 384 N and that of the hanging block is 195 N. Ignore all frictional effects, and assuming the pulley to be massless. (a) Find the acceleration of the two blocks. 1 m/s2 (b) Find the tension in the cord.

**physics**

A bucket of water with a mass of 20.0 kg is being pulled up from a well with a single massless rope. If the tension in the rope is 200 N, calculate the acceleration of the bucket.

**college physics**

In the drawing, the weight of the block on the table is 478 N and that of the hanging block is 195 N. Ignore all frictional effects, and assuming the pulley to be massless. (a) Find the acceleration of the two blocks. (b) Find the tension in the cord.

**physics**

The figure below shows an object of mass M = 1,276 g. It is free to move along a horizontal, frictionless surface. This object is further connected to a second object with a mass of m = 1,362 g by means of a massless string that extends around a massless, frictionless pulley. ...

**Physics**

A 9.00 kg mass is connected by a light cord to a 1.00 kg mass on a smooth surface as shown in the figure. The pulley rotates about a frictionless axle and has a moment of inertia of 0.300 k∙m2 and a radius of 0.500 m. Assuming that the cord does not slip on the pulley, ...

**AP Physics**

A cord runs around two massless, frictionless pulleys; a canister with mass m=20 kg hangs from one pulley; and you exert a force F if you are to lift the cord. a) What must be the magnitude of F if you are to lift the canister at a constant speed? b) To lift the canister by 2 ...

**Physics**

A 26.0 kg block is connected to an empty 1.00 kg bucket by a cord running over a frictionless pulley (Fig. 4-57). The coefficient of static friction between the table and the block is 0.490 and the coefficient of kinetic friction between the table and the block is 0.320. Sand ...

**physics**

An 849 g mass is attached to a pulley and a 9 N weight is attached to a thin massless cord, as shown below. .5 849 g 9 N T What is the tension T? The pulley is massless and frictionless. The acceleration of gravity is 9.8 m/s 2 . Answer in units of N

**Physics-Mechanics**

horizontal surface. The block is connected by a cord passing over a pulley to another block of mass 5.53 kg which hangs in the air, as shown on the following picture. Assume the cord to be light (massless and weightless) and unstretchable and the pulley to have no friction and...

**Physic**

The figure below shows a block of mass m resting on a 20¡ã slope. The block has coefficients of friction ¦Ìs = 0.73 and ¦Ìk = 0.53 with the surface. It is connected via a massless string over a massless, frictionless pulley to a hanging block of mass 2.0 kg.

**Physics C. Mechanics**

A small paint bucket of mas 5.0 kg is attached to a larger bucket of mas 15.0 kg by a light rope of 25 m long. The small bucket is at rest on the ground, and the rope goes up and over a small frictionless pulley and is attached to the larger bucket, which is on a window sill, ...

**physics HELPP!!!!!!!**

A 6.00 kg mass is connected by a light cord to a 1.00 kg mass on a smooth surface as shown in the figure. The pulley rotates about a frictionless axle and has a moment of inertia of 0.400 k∙m2 and a radius of 0.700 m. Assuming that the cord does not slip on the pulley, ...

**physics**

A mass m1 = 10 kg on top of a rough horizontal table surface is connected by a massless cable over a frictionless wheel to a hanging mass m2 = 5 kg, as shown in the previous problem. In m2 falls 1 m from rest in 1.2 seconds, find the co-efficient of kinetic friction between m1...

**physics**

There is a weight on a table, connected by a cord to another weight hanging over a pulley, as shown in the diagram below. The coefficient of kinetic friction for the weight on the table is 0:25. How fast does the hanging weight accelerate?

**physics**

A block of mass 3.62 kg lies on a frictionless horizontal surface. The block is connected by a cord passing over a pulley to another block of mass 7.8 kg which hangs in the air, as shown. Assume the cord to be light (massless and weightless) and unstretchable and the pulley to...

**phys**

Two blocks of mass m1 = 1.70 kg and m2 = 5.20 kg are connected by a massless cord passing over a frictionless pulley as shown in the figure below, with θ = 41.0°. The coefficient of kinetic friction between block 1 and the horizontal surface is 0.400, and the coefficient...

**physics**

A block of mass 4.44 kg lies on a frictionless horizontal surface. The block is connected by a cord passing over a pulley to another block of mass 6.55kg which hangs in the air , as shown above. Assume the cord to be light (massless and weightless) and unstretchable and the ...

**physics**

There is a weight on a table, connected by a cord to another weight hanging over a pulley, as shown in the diagram below. The coefficient of kinetic friction for the weight on the table is 0:25. How fast does the hanging weight accelerate? Top weight is 12 kg and bottom is 5kg.

**physics**

Workers who wash windows or paint the outside of buildings use an interesting contraption known as a painter's lift. This consists of a harness that the worker wears suspended by a rope. The rope runs through a pulley mounted on the roof of the building and back down to hang ...

**Physics**

A string is tied to a 4.4 kg block and a 120 g hanging bucket. students add 20 g washers one at a time to the bucket. the students are unaware that the coefficient of static friction for the block on the table is 0.42. What is the maximum force of static friction for the block...

**college physics 1**

As part of a fundraiser, the Chancellor has agreed to bungee jump from a crane 45 m above a pool filled with Jello. The plan is for the bungee cord to stop the Chancellor just before his head enters the Jello. Your task is to select a bungee cord that will safely stop the ...

**Physics**

A block of mass M resting on a 21.5° slope is shown. The block has coefficients of friction μs=0.605 and μk=0.344 with the surface. It is connected via a massless string over a massless, frictionless pulley to a hanging block of mass 2.57 kg. What is the minimum ...

**Physics**

A block of mass M resting on a 21.5° slope is shown. The block has coefficients of friction μs=0.605 and μk=0.344 with the surface. It is connected via a massless string over a massless, frictionless pulley to a hanging block of mass 2.57 kg. What is the minimum ...

**Physics**

A block of mass M resting on a 21.5° slope is shown. The block has coefficients of friction μs=0.605 and μk=0.344 with the surface. It is connected via a massless string over a massless, frictionless pulley to a hanging block of mass 2.57 kg. What is the minimum ...

**physics**

Two masses are hanging over a frictionless, massless pulley as shown blocks_pulley_aMass m1 is 5.0 kg and mass m2 is 7.0 kg

**Physics**

A massless string runs around two massless, frictionless pulleys, where one pulley is attached to the ceiling, and the other is suspended with a mass m. An object with mass m = 17 kg hangs from one pulley. A force F is exerted on the free end of the string to lift the object ...

**physics**

A 3 lb bucket containing 40 lb of water is hanging at the end of a 20 ft rope that weighs 4 oz/ft. The other end of the rope is attached to a pulley. How much work is required to wind the length of rope into the pulley, assuming that the rope is wound onto the pulley at a rate...

**Science**

An elastic cord of elastic constant k and length L is hung from point A having a massless block at the other end. A smooth ring of mass M falls from point A. What is the maximum elongation of cord?

**math**

Two blocks sit on a horizontal surface. They are connected to each other by a massless cord. The block on the left has a mass of 5.1 kg and the block on the right has a mass of 3.0 kg. Another massless cord is attached to the block on the right and pulls that block with a ...

**Physics**

Two blocks sit on a horizontal surface. They are connected to each other by a massless cord. The block on the left has a mass of 4.8 kg and the block on the right has a mass of 2.2 kg. Another massless cord is attached to the block on the right and pulls that block with a ...

**physics**

A phone cord is 4.75 m long. The cord has a mass of 0.200 kg. A transverse wave pulse is produced by plucking one end of the taut cord. The pulse makes four trips down and back along the cord in 0.900 s. What is the tension in the cord?

**physics**

A phone cord is 4.75 m long. The cord has a mass of 0.200 kg. A transverse wave pulse is produced by plucking one end of the taut cord. The pulse makes four trips down and back along the cord in 0.900 s. What is the tension in the cord?

**physics**

A phone cord is 4.25 m long. The cord has a mass of 0.200 kg. A transverse wave pulse is produced by plucking one end of the taut cord. The pulse makes four trips down and back along the cord in 0.780 s. What is the tension in the cord?

**physics**

A phone cord is 3.55 m long. The cord has a mass of 0.200 kg. A transverse wave pulse is produced by plucking one end of the taut cord. The pulse makes four trips down and back along the cord in 0.775 s. What is the tension in the cord?

**physics**

A phone cord is 3.55 m long. The cord has a mass of 0.200 kg. A transverse wave pulse is produced by plucking one end of the taut cord. The pulse makes four trips down and back along the cord in 0.775 s. What is the tension in the cord?

**Physics**

A phone cord is 2.85 m long. The cord has a mass of 0.254 kg. A transverse wave pulse is produced by plucking one end of the taut cord. The pulse makes four trips down and back along the cord in 0.758 s. What is the tension in the cord?

**Physics**

This is the info for the problem: A block of mass M1 = 160.0 kg sits on an inclined plane and is connected to a bucket with a massless string over a massless and frictionless pulley. The coefficient of static friction between the block and the plane is ms = 0.52, and the angle...

**Physics**

There are 2 objects connected with ideal, massless string that is hanging over an ideal (massless and frictionless) pulley. The angled surface is at a 25.0 degree angle. All surfaces are firctionless. A force F1 is applied horizontally as shown to the right on object 2. ...

**Physics mechanics**

A piece of cord 2.5m is connected between two points 2m apart horizontally. A massless pulley is placed on the cord and a force 20N at angle - 80 degrees is applied to it. 1. Show that when the pulley reaches a state of rest, the angle that the positions of the cor make with ...

**Physics**

A daredevil plans to bungee jump from a balloon 52.0 m above the ground. He will use a uniform elastic cord, tied to a harness around his body, to stop his fall at a point 15.0 m above the ground. Model his body as a particle and the cord as having negligible mass and obeying ...

**physics help**

Two 12.0 kg boxes are connected by a massless string that passes over a massless frictionless pulley as shown above. The boxes remain at rest, with the one on the right hanging vertically and the one on the left d = 2.9 m from the bottom of an inclined plane that makes an ...

**physics**

A daredevil plans to bungee jump from a balloon 53.0 m above a carnival midway. He will use a uniform elastic cord, tied to a harness around his body, to stop his fall at a point 10.0 m above the ground. Model his body as a particle and the cord as having negligible mass and ...

**AP physics B**

A phone cord is 3.26 m long. The cord has a mass of 0.224 kg. A transverse wave pulse is produced by plucking one end of the taut cord. The pulse makes four trips down and back along the cord in 0.865 s. What is the tension in the cord? Answer in units of N

**math**

If you have a twelve gallon bucket, a seven gallon bucket, and a six gallon bucket, how can you get exactly nine gallons into one bucket

**Physics**

A window washer pulls herself upward using the bucket-pulley apparatus shown in Fig. 4-42. The mass of the person plus the bucket is 69 kg.How hard must she pull downward to raise herself slowly at constant speed?If she increases this force by 11 percent, what will her ...

**Physics**

A window washer pulls herself upward using the bucket-pulley apparatus shown in Fig. 4-42. The mass of the person plus the bucket is 69 kg.How hard must she pull downward to raise herself slowly at constant speed?If she increases this force by 11 percent, what will her ...

**Physics**

A daredevil plans to bungee jump from a balloon 64.0 m above a carnival midway. He will use a uniform elastic cord, tied to a harness around his body, to stop his fall at a point 10.0 m above the ground. Model his body as a particle and the cord as having negligible mass and ...

**Physics**

Three blocks are located on a horizontal frictionless table. They are connected by a massless cord, as shown in the figure, and pulled to the right. The masses of the three blocks are m1 = 8 kg, m2 = 33 kg, and m3 = 49 kg. The pulling force is equal to T3 = 89 N. What is the ...

**physics**

A small block on a frictionless horizontal surface has a mass of 2.50×10−2 . It is attached to a massless cord passing through a hole in the surface. (See the figure below .) The block is originally revolving at a distance of 0.300 from the hole with an angular speed of...

**math question grade 8!!**

shelby wants to paint the walls and ceiling of a rectangular room. (height:2.6cm, width:4.8cm, length:6.8cm) type of paint size of paint can cost wall paint 4L $24.95 1L $7.99 ceiling paint 4L $32.95 (one litre of paint covers 9.5 m) a) what is the least amount of paint shelby...

**math**

how do you measure and get 4 gallons of water only having an unmarked 5 gallon bucket and an unmarked 3 gallon bucket and a large container of water ok this is simple, u just have to think out of the bucket...heh.. so here goes fill the 5 gallon bucket to full and pour water ...

**Physics 1**

A mass m1 = 4.9 kg rests on a frictionless table and connected by a massless string over a massless pulley to another mass m2 = 4.7 kg which hangs freely from the string. When released, the hanging mass falls a distance d = 0.8 m.

**Math**

You begin to fill a bucket with water at 9 am. Each minute you double the amount of water in the bucket. If it takes you 1 hour to fill the bucket, at what time is the bucket one-quarter full?

**Physics**

Three blocks are located on a horizontal frictionless table. They are connected by a massless cord, as shown in the figure, and pulled to the right. The masses of the three blocks are m1 = 38 kg, m2 = 37 kg, and m3 = 17 kg. a.) The pulling force is equal to T3 = 45 N. What is ...

**physics**

) A cord has two sections with linear densities of and Fig. 15–34. An incident wave, given by where x is in meters and in seconds, travels along the lighter cord. (a) What is the wavelength on the lighter section of the cord? (b) What is the tension in the cord? (c) What is ...

**physics**

A 28.0 block is connected to an empty 2.20 bucket by a cord running over a frictionless pulley. The coefficient of static friction between the table and the block is 0.44 and the coefficient of kinetic friction between the table and the block is 0.35. Sand is gradually added ...

**Physics**

A 28.0kg block is connected to an empty 1.80kg bucket by a cord running over a frictionless pulley. The coefficient of static friction between the table and the block is 0.41 and the coefficient of kinetic friction between the table and the block is 0.35. Sand is gradually ...

**Physical Science**

A 28.0kg block is connected to an empty 1.80kg bucket by a cord running over a frictionless pulley. The coefficient of static friction between the table and the block is 0.41 and the coefficient of kinetic friction between the table and the block is 0.35. Sand is gradually ...

**Physics**

Yocelyn is lifting a 10.0 kg bucket from a well. She wants the bucket to accelerate to the top of the well at 2.0m/s^2. How much force does she need to apply to the bucket through the rope in order to accelerate the bucket up to the surface?

**physics**

The device called an At-woods machine.if m2 is greatr than m1 an assumng th pulley to be frictionless and massless.1.how far will m2 fall in th time T aftr the system is released? 2.what is th tension in the cord that connect two massess? 3. If m1=5kg and m2=3kg,what is the ...

**physics**

The device called an At-woods machine.if m2 is greatr than m1 an assumng th pulley to be frictionless and massless.1.how far will m2 fall in th time T aftr the system is released? 2.what is th tension in the cord that connect two massess? 3. If m1=5kg and m2=3kg,what is the ...

**Physics, Science**

A 26 kg block is connected to an empty 1 kg bucket by a cord running over a frictionless pulley. The coefficient of static friction between the table and the block is 0.435 and the coefficient of kinetic friction between the table and the block is 0.320. Sand is gradually ...

**Physics**

A block of mass 5.53 kg lies on a frictionless horizontal surface. The block is connected by a cord passing a. over a pulley to another block of mass 2.25 kg which hangs in the air. Assume the cord to be light (massless and weightless) and unstretchable and the the pulley to ...

**physics**

Three blocks are located on a horizontal table. The coefficient of kinetic friction between the blocks and the table is 0.276. They are connected by a massless cord, as shown in the figure below, and pulled to the right. The masses of the three blocks are = 9.0 kg, = 0.5 kg, ...

**Physics**

A 26.0 kg block is connected to an empty 1.00 kg bucket by a cord running over a frictionless pulley. The coefficient of static friction between the table and the block is 0.490 and the coefficient of kinetic friction between the table and the block is 0.320. Sand is gradually...