Tuesday
February 9, 2016

Search: If 5.00mL of 0.1000 M NaOH solution is needed to just neutralize excess acid after 20.00 mL of HCl was added to 1.00 g of an antacid, how many moles of acid can the antacid counteract per gram?

Number of results: 78,230

Chemistry
Citric acid is a tri-protic acid with a Ka1 =8.4x10-4 Ka2=1.8x10-5 and Ka3=4.0x10-6. calculate the pH at the 2nd equivalence point in the titration of 85.5 mL of a .21 M citric acid solution with .25 M NaOH. Calculate the pH, after 25.8 mL of NaOH have been added. Calculate ...
December 9, 2015 by Jill

Chem Webwork help
1. What is the pH when enough 0.10 M Base (in mL) is added to neutralize 8 mL of 0.10 M Acid? Complete the following table. NaOH HC2H3O2 2. What is the pH of the solution created by combining 2.60 mL of the 0.10 M NaOH(aq) with 8.00 mL of the 0.10 M HCl(aq)? with 8.00 mL of ...
July 12, 2010 by Sammy

chemisty
A nitric acid solution is neutralized using sodium hydroxide. How many grams of sodium hydroxide are needed to neutralize 5.50 L of 1.200 M nitric acid solution? HNO3 (aq) + NaOH (aq) → H2O (l) + NaNO3 (aq)
December 1, 2010 by silent

chemistry
How many milliliters of 0.602M hydrochloric acid (HCl(aq)) must be added to 15.00mL of 0.538M sodium hydroxide (NaOH(aq)) to reach the equivalence point? Report your answer to 2 decimal places.
March 28, 2013 by Anonymous

Chemistry
A 205 mg sample of a diprotic acid is dissolved in enough water to make 250.0 ml of solution. The pH of this solution is 2.15. A saturated solution of calcium hydroxide (Ksp= 1.3 x 10-6) is prepared by adding excess calcium hydroxide to water and then removing the undissolved ...
February 25, 2013 by Summer

Chemistry
Find the Molecular weight of unknown acid #5... Mass of acid #5 = 1.200g Volume (acid was mixed in) = 100ml (distilled water) Conectration of NaOH = 0.989 M Aliquot of acid titrated with NaOH = 25ml = 0.025 L Average volume of NaOH from titration = 9.3ml = 0.0093L Molar ratio ...
October 10, 2010 by AishaKay

High school
A 15.00ml of NaoH was titrated to the stoichiometric end point with 17.40ml of 0.23M HCL. What is the molarity of NaoH in the solution?. Calculate the mass of NaoH in 15.00ml solution.[H=1, Cl=35.5, Na=23,O=16].
August 25, 2015 by Favour

chemistry
acid: HCI 0.10 M Base:NaOH O.050 M 3 ml of HCI was used. Calculate the volume of base required to reach the equivalence point of this titration. Somewhere in the finding the solution, i have to use the fact that Moles HCl = moles NaOH. this is what i have so far: Volume of ...
March 3, 2009 by Anonymous

chemistry
A volume of 100mL of 1.00 M HCl solution is titrated with 1.00 M NaOH solution. You added the following quantities of 1.00 M NaOH to the reaction flask. Classify the following conditions based on whether they are before the equivalence point, at the equivalence point, or after...
August 6, 2012 by Anon

Chemistry
You have an unlimited amount of 12M HCl stock solution. You need to neutralize 2.00 grams of NaOH by slowly adding 0.100M HCl solution. How will you prepare the proper amount of hydrochloric acid solution to add to the beaker of sodium hydroxide using a 500 ml volumetric flask.
November 25, 2011 by Shelby

Chemistry
A 0.2800 g sample of an unknown acid requires 28.22 mL of 0.1199 M NaOH for neutralization to a phenolphthalein point. a.) How many moles of OH- are used? b.) How many moles of H+ are found in the acid? c.) What is the calculated equivalent molar mass of the unknown acid? If I...
November 1, 2014 by Jess

AP Chemistry
(a) What is the pH of a 2.0 molar solution of acetic acid. Ka of acetic acid = 1.8 x 105 (b) A buffer solution is prepared by adding 0.10 liter of 2.0 molar acetic acid solution to 0.1 liter of a 1.0 molar sodium hydroxide solution. Compute the hydrogen ion concentration of ...
February 13, 2007 by Dave

chemistry
Prepare 500mL of a 0.200 M acetate buffer at pH 4.90 using only pure acetic acid, 3M NaOH, and water. 1) Add acetic acid to ~400mL of water in a 500 mL beaker. How many grams of acetic acid are needed? 2)Add 3 M NaOH solution until pH is 4.90. What volume of NaOH is needed? (...
September 5, 2011 by Ryn

college
1) You are given solutions of HCl and NaOH and must determine their concentrations. You use 37.0mL of NaOH to titrate 100mL of HCl and 13.6 mL of NaOH to titrate 50.0mL of 0.0782 M H2SO4. Find the unknown concentrations. Molarity of NaOH and molarity of HCL? 2) Sodium ...
October 4, 2010 by Ashley

Chemistry
1) You are given solutions of HCl and NaOH and must determine their concentrations. You use 37.0mL of NaOH to titrate 100mL of HCl and 13.6 mL of NaOH to titrate 50.0mL of 0.0782 M H2SO4. Find the unknown concentrations. Molarity of NaOH and molarity of HCL? 2) Sodium ...
October 4, 2010 by Ashley

Chemistry
Calculate the molarity of the HCl solution if 25.00ml of the acid are required to neutralize 1.00g of each of the following 1) KOH 2)Ca(OH)2 I calculated the molar mass of KOH which was 56.11 Then I took 1.00g/56.11 = 0.0178mol To find out the molarity I did 0.0178/0.025=0....
October 28, 2014 by Sarah

Chimestry
How many moles of HNO(3) are present if 4.20*10^-2 mol of Ba(OH)(2) was needed to neutralize the acid solution?
December 3, 2011 by Carmen

chemistry
How many moles of HNO3 are present if 0.236mol of Ba(OH)2 was needed to neutralize the acid solution?
August 6, 2012 by Anon

Chemistry
How many moles of HNO3 are present if 0.116mol of Ba(OH)2 was needed to neutralize the acid solution?
April 1, 2015 by Mac

biochemistry
The pH of 0.02M solution of a weak acid was measured at 7.6. What is the [OH-] in this solution? B) The Ka for benzoic acid is 6.4 x 10-5M. 150 ml of 0.1 M NaOH is added to 200 ml of 0.1 M benzoic acid, and water is added to give a final volume of 1 L. What is the pH of the ...
September 21, 2012 by Emma

chemistry
Calculate the pH from the addition of 10 mL of a 0.10 M NaOH solution to 90 mL of 0.10 M HCl. okay so i understand how to do most of it but i get messed up at one part.. so i made my equation: NaOH + HCl -> H2O + NaCl (strong base, strong acid= complete dissociation) so net...
November 8, 2011 by BOB PLEASE HELP!:)

Chemistry
10. For the titration of 20.00 mL 0.1000 M lactic acid with 0.1000 M NaOH, calculate the pH: a. before any titrant is added b. 10.00 mL prior to the equivalent point c. at the equivalent point d. 10.00 mL after the equivalence point. Plot the points obtained on a graph of pH ...
June 22, 2014 by Rick

Chemistry
A 20.00 mL sample of a .1000M unknown acid solution is titrated with .1000M NaOH. Given that the acid is diprotic and its pKa's are 1.90 and 6.70 a.) Estimate the pH after 10 mL of base are added b.) estimate the pH after 20 mL of base are added c.) estimate the pH after 30 mL...
March 22, 2015 by lawerence

chemistry
A student mixes 4 reagents together thinking that the solution will neutralize each other . The solutions are mixed together are 50 ml of 0.100 M .hydrochloric acid 100 ml of 0.200 M of nitric acid 500 ml of 0.0100 M calcium hydroxide and 200 ml of 0.100 M of rubidium ...
October 2, 2014 by mathew

chemistry
if the pH of a half-neutralized acid solution is 5.4, how would you find the [H+] of the the solution. There is 1.0 g of L-ascorbic acid which was dissolved in 100 ml of water. That solution was split in two and 50 ml of the solution was titrated with 0.2 M NaOH (13 ml NaOH). ...
April 17, 2008 by tom

AP Chemistry
Suppose you have added 200.0 mL of a solution containing 0.5000 moles of acetic acid per liter to 100.0 mL of 0.50000 M NaOH. What the is the final pH? The Ka of acetic acid is 1.77 x 10^-5.
March 8, 2015 by Freddy

Chemistry
I am trying to solve a buffer problem. I know I need to use the Henderson-Hasselblach equation but I am not getting the correct answer. The problem is: Propionic acid is a weak monoprotic acid with Ka = 1.310-5 M. NaOH(s) was gradually added to 1.00 L of 1.2910-2 M propionic...
April 2, 2015 by Cara

chemisty
600 mL of an unknown monoprotic acid was titrated with a standard solution of a 1.0 M base. If it took 40.0 mL of the base to neutralize the acid, what was the H+ ion concentration of the acid in moles per Liter?
December 14, 2010 by ana

chemistry
Calculate the pH during the titration of 20.00 mL of 0.1000 M CH3CH2CH2COOH with 0.1000 M NaOH after 26.5 mL of the base have been added. Ka of butanoic acid = 1.54 x 10-5.
October 31, 2010 by karla

chemistry
Calculate the pH during the titration of 20.00 mL of 0.1000 M CH3CH2CH2COOH with 0.1000 M NaOH after 26.5 mL of the base have been added. Ka of butanoic acid = 1.54 x 10-5.
October 31, 2010 by karla

chemistry
You weigh a sample of a monoprotic unknown acid and dissolve it in 50.00 mL of distilled water. Exactly half of this solution is titrated with Sodium Hydroxide to the phenolphthalein end point. The pH of the other half of the original solution is measured with a pH meter. The...
July 30, 2013 by faruk

Chemistry
How many milliliters of a 0.1 Molar NaOH solution is needed to neutralize 1 liter of lemonade containing 25% citric acid?
August 5, 2011 by Katie

Chemistry
A 50.0 mL sample of 0.12 M formic acid, HCOOH, a weak monoprotic acid, is titrated with 0.12 M NaOH. Calculate the pH at the following points in the titration. Ka of HCOOH = 1.8 multiplied by 10-4. What is the pH when 50.0 mL NaOH is added 60.0 mL NaOH is added 70.0 mL NaOH is...
April 3, 2011 by George

Biochemistry
Determine the MAX amount of titrant you will possibly need for your titration. Your unknown solution has been prepared by dissolving btw 0.05-0.09mol of zwitterion form of the amino acid in 1L of ~ 0.1M HCl solution. you will titrate 50mL of that amino acid with 0.5M NaOH. ...
May 18, 2015 by Abba

Biochemistry
Determine the MAX amount of titrant you will possibly need for your titration. Your unknown solution has been prepared by dissolving btw 0.05-0.09mol of zwitterion form of the amino acid in 1L of ~ 0.1M HCl solution. you will titrate 50mL of that amino acid with 0.5M NaOH. ...
May 18, 2015 by Abba

Biochemistry
Determine the MAX amount of titrant you will possibly need for your titration. Your unknown solution has been prepared by dissolving btw 0.05-0.09mol of zwitterion form of the amino acid in 1L of ~ 0.1M HCl solution. you will titrate 50mL of that amino acid with 0.5M NaOH. ...
May 19, 2015 by Abba

chemistry
three student chemists measured 50.0 mL of 1.00 M NaOH in separate Styrofoam "coffee cup" calorimeters ( Part B). Brett added 50.0 mL of 1.10 M HCI to his solution of NaOH; Dale added 45.5 mL of 1.10 m HCL 9 eqaul moles) to his NaOH solution. Lyndsay added 50.0 mL of 1.00 m ...
January 17, 2011 by Daniel

chemistry
a 5.55g sample of a weak acid with ka=1.3*10^-4 was combined with 5.00ml of 6.00 M NAOH and the resulting solution was diluted to 750mL. The measured pH of the solution was 4.25. what is the molor mass of the weak acid. if used the formula pH=kpa+log(base/acid) Ph=3.89+log(6....
November 25, 2010 by help

chemistry
a 5.55g sample of a weak acid with ka=1.3*10^-4 was combined with 5.00ml of 6.00 M NAOH and the resulting solution was diluted to 750mL. The measured pH of the solution was 4.25. what is the molor mass of the weak acid. if used the formula pH=kpa+log(base/acid) Ph=3.89+log(6....
November 25, 2010 by help

chemistry
A chemist needs a HCl solution with a molarity of less than 0.400 M for an experiment. To find out if a sample of HCl solution can be used in the lab, the chemist performs a titration to neutralize 59.2 mL of the HCl with 45 mL of 0.400 M NaOH. Based on the results, will the ...
January 31, 2014 by Matthew

Chemistry
What is the concentration of an acetic acid solution if 11.2 mL of 1.002 Molarity sodium hydroxide solution is needed to completely neutralize 5.1 mL of the acid?
March 23, 2011 by Bruce

Chemistry
A solution buffered at a pH of 5.00 is needed in an experiment. Can we use acetic acid and sodium acetate to make it? If so, how many moles of NaC2H3O2 must be added to a 1.0L of a solution that contains 1.0 mol HC2H3O2 to prepare the buffer. The Ka of acetic acid is 1.8x10^-5...
June 20, 2014 by Veronica

chemistry
You weigh a sample of a monoprotic unknown acid and dissolve it in 50.00 mL of distilled water. Exactly half of this solution is titrated with Sodium Hydroxide to the phenolphthalein end point. The pH of the other half of the original solution is measured with a pH meter. The...
July 30, 2013 by faruk

Chemistry, acids and bases
(a) Find pH and pOH of 1.0 M solution of sodium benzoate, NaC6H5COO. (Ka of benzoic acid is 6.2x10^-5) (b) Calculate pH after 0.205 moles per liter of HCl was added (assume volume does not change (c) Calculate pH after 1.0 moles per liter of HCl was added (assume volume does ...
May 6, 2008 by Marissa

Chemistry
I did an experiment using 20ml of 0.1M acetic acid and added 8ml of 0.1M NaOH. pH obtained after adding NaOH was 5.2. How do i calculate the mols of NaOH that reacted? mols of acetate formed, acetic acid initially present and acetic acid unreacted. Also how do i determine the...
April 7, 2011 by Jude

Chemistry
Hi,may I have your help? I have posted a titration question that I'm trying to solve. The correct answer to the problem is 0.128 M, however,I have arrived at the answer: 0.000128 M. Here's the question: If 38.30 mL of 0.250 M NaOH is used to titrate 25.0 mL of phosphoric acid,...
December 10, 2010 by Cliff

Chemistry
What is the molarity of a nitric acid solution if 43.33 mL of 0.10000 KOH solution is needed to neutralize 20.00 mL of the acid?
January 23, 2013 by Anonymous

College Chemistry
You weigh a sample of a monoprotic unknown acid and dissolve it in 50.00 mL of distilled water. Exactly half of this solution is titrated with Sodium Hydroxide to the phenolphthalein end point. The pH of the other half of the original solution is measured with a pH meter. The...
April 9, 2013 by Kim

chemistry
Calcium carbonate CaCO3 reacts with stomach acid (HCl, hydrochloric acid) according to the following equation: CaCO3(s)+2HCl(aq)->CaCl2(aq)+H2O(l)+CO2(g) Tums, an antacid, contains CaCO3. If Tums is added to 35.0 mL of 0.300 M HCl,how many grams of CO2 gas are produced?
October 8, 2010 by Dana

Some Lab Question (s)
Yes...another calculation problem. Rxn: 1ml isopentyl alcohol + 1.5ml glacial acetic acid + 3 drops sulfuric acid=> isopentyl acetate to calculate the theoretical yield.. I know that the acetic acid is in excess but how would I calculate the theoretical yield? is it just ...
March 8, 2008 by ~christina~

chemistry
calculate the molarity of an acetic acid solution if 39.96 mL of the solution is needed to neutralize 136mL of 1.41 M sodium hydroxide. the equation for the reaction is HC2H3O2(aq) + NaOH(aq) > Na+(aq) + C2H3O2(aq) +H2O(aq)
April 29, 2012 by Randy

chemistry
calculate the molarity of an acetic acid solution if 39.96 mL of the solution is needed to neutralize 136mL of 1.41 M sodium hydroxide. the equation for the reaction is HC2H3O2(aq) + NaOH(aq) > Na+(aq) + C2H3O2(aq) +H2O(aq)
April 29, 2012 by Randy

Chemistry
Tartaric acid has two acidic (ionizable) hydrogens. The acid is often present in wines and precipitates from solution as wine ages. A solution containing an unknown concentration of the acid is titrated with NaOH. It requires 22.62 mL of 0.2000 M NaOH solution of titrate both ...
October 10, 2011 by Destiny

Chemistry
During an acid-base titration, 25 mL of NaOH 0.2 M were required to neutralize 20 mL of HCl. Calculate the pH of the solution for each: a) Before titration b) After adding 24.9 mL of NaOH c) At equivalence pt d) After adding 25. 1 mL of NaOH e) The pH of the equivalence pt ...
May 10, 2014 by al

chemistry
So I did a titration lab at school with NaOH and HCl. i have to find: - volume used, NaOH - Moles of NaOH - Moles of HCl -Volume used unknown HCl - Molarity of HCl solution My concentration of NaOH stock solution was 0.100 mol/lL Final buret reading, NaOH: 14.20 ml Initial ...
January 4, 2015 by julie

Chemistry
Na₂CO₃ (s) + 2HCL (ag) → 2NaCl (ag) + CO₂ + H₂O (l) If 4.25g of sodium carbonate is reacted completely with excess hydrochloric acid as 3M HCl, how many mL of HCl would be consumed? Note: Assume 3M HCl contains 3.00 moles of HCl per liter of ...
April 30, 2012 by Shelby

Chemistry
Volume of HCl, mL:26.5mL Volume of NaOH,mL:29.1mL Molarity of NaOH, mol/L:0.1m/L balanced equation: NaOh+HCl-->NaCl+H2O Using the above equation calculate the number of moles of acid required to react with 2.91 moles of base. Please help me I have no idea what to do.
May 28, 2012 by Gaby

Chemistry
For the following acid-base reaction, calculate the mass (in grams) of each acid necessary to completely react with and neutralize 5.00 g of the base. HCl(aq)+ NaOH(aq)->H20(l)+NaCl(aq) Please explain how to do this.
September 16, 2011 by Brittany

Chemistry
25.00 mL of a solution of oxalic acid are titrated with 0.2586 m NaOH (aq). The stoichiometric eend point is reached when 43.42 mL of the solution of base is added. What is the molarity of the oxalic acid solution? Oxalic acid reacts with sodium hydroxide as shown: H2C2O4(aq...
December 1, 2012 by ANONYMOUS

chemistry
Calculate the pH of a [Acid] M aqueous solution of each of the hydrochloric and acetic acids: Acid [Acid] pH HCl 0.10 HC2H3O2 0.10 I know that HCl is just -log(0.10) which is 1, but can't get the pH of HC2H3O2.
May 4, 2008 by Renee

Chemistry
in this experiment you are you will begin by preparing a dilute soultion of sodium hydroxide by taking 50 ml of 3 M NaOh stock solution and diluting it with 250 ml of water. i found that and the answer was .5 but how do i do this b. calculate the number of moles and grams of ...
February 23, 2010 by Chris

Chemistry
My mind is bleeding again. I am trying to figure out the molarity of acetic acid in Vinegar. We used a standard solution of .613 Molars of NaOH. We added 33.75mL of NaOH to completely titrate/neutralize 25mL of Vinegar and we're supposed to be able to figure out the molarity ...
June 22, 2010 by Casey

Chemistry
a volume of 50mL of a standard HCl solution is needed to neutralize 50 mL of 1x10-2 M NaOH. what volume of this HCl solution is needed to neutralize 50 mL of 1x10-2 M Ba(OH)2
May 3, 2010 by Bianca

Chemistry
Question: A volume of 26.00ml of 4.30 M. HCL is mixed with 33.70 ml of 10.80 M H3PO4 s mixture is diluted to 1.00 liter with distilled water. A 50.00 ml portion of this diluted mixture is than titrated with .2200 M. NaOH. a) compute the concentration of phosphoric acid after ...
April 19, 2009 by Eliz

Chemistry - Acid Base Titration
When you complete a acid base titration of NaOH and HCl and how to you find the molarity/concentration of HCl. I used 9 mL of HCl with 50 mL of water. But when solving for concentration, do I use 9 mL or 59 mL (water + HCl)? Also, does the water in the HCl affect the outcome ...
January 31, 2008 by Steve

Gen. Chemistry lab
Trying to find mass percent of acetic acid in 25 drops of .683M NaOH solution are required to neutralize 10 drops of cleaning vinegar. Assume that the density of the cleaning vinegar is the same as the density of regular vinegar which is 1.05 g ml-1 You need to clean up the ...
March 3, 2007 by Toni

College Chemistry - Science
At room temperature (25C), 45 mL of a 0.002 M acid solution reacts with 30 mL of a NaOH (aq) solution (pH = 11.95), determine (through calculations) whether the acid is phosphoric acid (H3PO4), acetic acid (CH3COOH), or carbonic acid (H2CO3).
March 2, 2014 by Anonymous

Algebra
100mL of a solution contains 30 mL of acid; this is called a 30% acid solution because part 30 ---- = ---- = 0.30. whole 100 How many milliliters of acid x would need to be added to the solution to turn it into a 50% solution ? (HInt: Adding acid increases both the volume of ...
October 23, 2013 by Stacey

chem
In the following balanced neutralization reaction equation, how many moles of HCl are required to completely neutralize 0.040 moles of NaOH? HCl + NaOH d NaCl + H2O
February 25, 2014 by michael

chemistry
A sample of solid monoprotic acid with molar mass equal to 169.7 g/mol was titrated with 0.1599 M sodium hydroxide solution. Calculate the mass in grams of acid to be used if the volume of NaOH to be used is 25 mL. Is the solution correct?: moles NaOH = 0.1599 x 0.025=3.998x10...
October 3, 2008 by Erika

Solving Rational Equations
100mL of a solution contains 30 mL of acid; this is called a 30% acid solution because part 30 ---- = ---- = 0.30. whole 100 How many milliliters of acid x would need to be added to the solution to turn it into a 50% solution ? (HInt: Adding acid increases both the volume of ...
October 23, 2013 by Stacey

chemistry
Assuming the density of a 5% acetic acid solution is 1.0 g/mL, determine the volume of the acetic acid solution necessary to neutralize 25.0 mL of 0.10 M NaOH. Record this calculation on your report sheet.
June 29, 2010 by love

CHM
Assuming the density of acetic acid solution is 1.0 g/mL, determine the volume of the acetic acid solution necessary to neutralize 25.0 mL of 0.10 M NaOH. Record this calculation on your report sheet
January 25, 2011 by JACK

organic chemistry
1)Why benzoic acid is soluble in NaOH? 2)Why HCl is insoluble in titration of benzoic acid and NaOH? Benzoic is soluble in a solution of NaOH because the base forms the sodium salt with the acid to form sodium benzoate. The sodium salt is soluble. The second part of your ...
February 21, 2007 by kim

chemistry
assuming the density of a 5% acetic acid solution is 1.0g/ml, determine the volume of the acetic acid solution necessary to neutralize 25.0 ml of 0.10 m NaOH. also record this calculation on your report sheet.
October 22, 2009 by janvi

General Chemistry
Starting out with 50 mL of 0.20 M NaHCO3, calculate how many mL of 0.50 M NaOH solution to add to make 100 mL of approximately 0.10 M (total) buffer solution with a pH of 10.35. By adding NaOH, some of the NaHCO3 gets converted to the conjugate Na2CO3. This conjugate acid/base...
April 3, 2012 by Lucy

chemistry
A 3.555 g sample of a monoprotic acid was dissolved in water. It took 23.32 mL of a 0.875 M NaOH to neutralize the acid. Calculate the molar mass of the acid.
March 21, 2012 by blair

chemistry
A 3.555 g sample of a monoprotic acid was dissolved in water. It took 23.32 mL of a 0.875 M NaOH to neutralize the acid. Calculate the molar mass of the acid.
March 21, 2012 by blair

chemistry
19 mL of 0.50 mool/L NaOH which is standardized becomes titrated alongside 24 mL of 0.44 mol/L acetic acid. Determine the pH of the solution Please judge my work: Becasue NaOH and acetic acid react in a 1:1 ratio, initital moles of acetic acid =0.0019 L x 0.44M = 0.000836 mols...
April 9, 2008 by Joseph

chem
I have a titration of 30ml of .360 M H2C6H6O6 Its K1 =6.8E-5 K2 =2.8 E-12 With .280 M NaOH. It is a weak acid being titrated by a strong base Its a two step process with the ice table to find the eqpts. Ineed to list the volumes of NaOH needed for the titration as I go. Been ...
July 10, 2011 by ted

AP Chemistry
A buffer solution contains .4mol of formic acid, HCOOH and a .6mol of sodium formate, HCOONa, in 1L of solution. Ka of formic acid is 1.8 x 10^-4. a) calculate pH b) if 100ml of this buffer solution is diluted to a volume of 1L with pure water, the pH does not change. Discuss ...
April 25, 2010 by Jessie

Chem
Using the standardized NaOH solution, the student weighs out 0.2550g of a solid unknown acid and finds that 28.50mL of the NaOH solution is required to reach an end point with the acid. Calculate the molar mass of the unknown acid, assuming the acid is diprotic.
April 25, 2014 by Jen

Chem
Using the standardized NaOH solution, the student weighs out 0.2550g of a solid unknown acid and finds that 28.50mL of the NaOH solution is required to reach an end point with the acid. Calculate the molar mass of the unknown acid, assuming the acid is diprotic.
April 25, 2014 by Jen

chemistry
I am trying to answer a bunch of lab questions about a lab I did and am stuck on finding the morality of the diluted vinegar solution? Can anyone help me? (I hope I gave enough info) Here where the lab procedures that I already went through: Transfer 10mls (Vc)of vinegar to a ...
June 12, 2009 by Gweedo8

Chemistry
Question: Consider the titration of 30.00 ml of .360 M. H2C6H6O6 (abscorbic acid; K1= 6.8e-5; K2=2.8E-12) solution with .280M NaOH. Note the weak acid, H2C6H6O6, is being titrated with the strong base, sodium hydroxide. the neutralization reaction are: H2C6H6O6 + NaOH goes to ...
April 19, 2009 by Anonymous

Dr.Bob the question Ihad reposted (NOT the old one
Yes...another calculation problem. Rxn: 1ml isopentyl alcohol + 1.5ml glacial acetic acid + 3 drops sulfuric acid=> isopentyl acetate to calculate the theoretical yield.. I know that the acetic acid is in excess but how would I calculate the theoretical yield? is it just ...
March 9, 2008 by ~christina~

chemistry
10). What is the molarity of an HCl solution if 42.5 mL of a 0.110 M KOH solution is needed to titrate a 25.0-mL sample of the acid? A) 0.187 M HCl B) 0.587 M HCl C) 0.0647 M HCl D) 5.35 M HCl E) 1.70 M HCl
November 28, 2011 by denis

Acid-Base chem
Which of the following would for a buffer if added to 250.0 mL of .150 M SnF2? a).100 mol HCl b).060 mol HCl c).040 mol HCl d).040 mol NaOH e).040 mol HF I figured I could find out the pH of the solution with HCl/NaOH/HF added, and then find the pH when equal amounts of H+ and...
May 5, 2007 by Taylor

MOLARITY QUESTION
I am trying to answer a bunch of lab questions about a lab I did and am stuck on finding the morality of the diluted vinegar solution? Can anyone help me? (I hope I gave enough info) Here where the lab procedures that I already went through: Transfer 10mls (Vc)of vinegar to a ...
June 12, 2009 by Gweedo8

Chemistry (Titration Curves)
Which of the following Acid+Base titration combinations would have a buffering region in their plot? 1)Strong Acid+Strong base (HCl+NaOH) 2)Weak acid and strong base (Acetic+NaOH) 3)Strong Acid and weak base (HCl+NH3) 4)Weak Acid and weak base (Acetic+NH3) In all cases, there ...
May 8, 2011 by Anonymous

chemistry
0.1 mol of an organic acid is added to 600 ml of 0.5M KOH solution. The resulting basic solution can be neutralized by 200 ml of 0.5 M HCl solution. Which acid is ot?
April 1, 2015 by lalala

Chemistry
A buffer contains 5.00 M acetic acid and 5.00 M acetate anion. Gaseous HCl (0.010 mole) is added to 1.00 L of this buffer solution (the total volume does not change). For this buffer solution, the initial pH is_______and the final pH after the addition of the HCl gas is_______...
May 2, 2010 by Ivana

Math - Alg
How much pure acid must be added to a 30% acid solution to make a 60L solution which is 50% acid? This was the answer I got from Reiny. amount of pure acid to be added -- x L 1(x) + .3(60-x) = .5(60) 10x + 3(60-x) = 5(60) 10x + 180 - 3x = 300 7x = 120 x = 120/7 or appr 17.14 L...
February 8, 2014 by Brittany Jones

CHEMISTRY
A student needed to standardize a solution of NaOH which was approximately 0.125 M. The student carefully prepared the titration setup, but after 25 mL of NaOH was added, what was the pH of solution if initially flask contains 25 mL of 0.250 M HCl solution?
October 17, 2010 by Maria

chemistry
A student needed to standardize a solution of NaOH which was approximately 0.125 M. The student carefully prepared the titration setup, but after 25 mL of NaOH was added, what was the pH of solution if initially flask contains 25 mL of 0.250 M HCl solution?
October 17, 2010 by Cindy

chem--need help, please!!!
Ka for benzoic acid, C6H5COOH, 6.5x10^-5. Calculate the pH of solution after addition of 10.0, 20.0, 30.0, and 40.0 mL of 0.10 M NaOH to 40.0 mL of 0.10 M Benzoic acid. PLEASE CHECK MY ANSWER!!!!! My answer is: Moles acid = 0.040 L x 0.10 M = 0.0040 Moles base = 0.010 L x 0.10...
October 20, 2010 by Andy

Chemistry
In this experiment NaOH is standardized to find out the percent by mass of the acetic acid in a sample of vinegar. A student had not allowed the NaOH pellets to dissolve completely before standardizing it with KHP, but when the student refilled the buret with NaOH to titrate ...
March 29, 2014 by Sandy

Chemistry
Will the 90-100 mL of distilled water added to the acid solution (10.00 mL) significantly change the moles of H3O+ in the 1.00 M HCl solution? Why or why not?
October 5, 2013 by Ash

chemistry
For each of the following acid-base reactions, calculate how many grams of each acid are necessary to completely react with and neutralize 2.1g of the base. 1) HCl(aq)+NaOH(aq)-->H2O(l)+NaCl(aq) 2) 2HNO3(aq)+Ca(OH)2(aq)-->2H20(l)+Ca(NO3)2(aq) 3) H2SO4(aq)+2KOH(aq)-->...
November 11, 2010 by rachel

Chemisty
Consider the reaction of sulfuric acid, H2SO4, with sodium hydroxide, NaOH. H2SO4(aq) + 2 NaOH(aq) -> 2H2O(l) + Na2SO4(aq). Suppose a beaker contains 35.0mL of 0.175M H2SO4. How many moles of NaOH are needed to react completely with sulfuric acid? Thank you
October 22, 2014 by Mandy

  1. Pages:
  2. <<Prev
  3. 1
  4. 2
  5. 3
  6. 4
  7. 5
  8. 6
  9. 7
  10. 8
  11. 9
  12. 10
  13. 11
  14. 12
  15. 13
  16. 14
  17. 15
  18. Next>>