Friday
December 19, 2014

Search: Equation for reaction of benzoic acid and sodium hydroxide?

Number of results: 38,599

chemistry
22 ml nitric acid neutralises 20 ml , 0.5 normal sodium hydroxide sollution. calculate weight of nitric acid in 500 ml?
September 8, 2013 by Anonymous

chemistry
which of the following was not one of the products when you titrated the vinegar solution with sodium hydroxide? HC2H3O2+NaOH===>NaC2H3O2+H2O a salt water sodium acetate acetic hydroxide
July 13, 2010 by Anonymous

Chemistry
What is the concentration of an acetic acid solution if 11.2 mL of 1.002 Molarity sodium hydroxide solution is needed to completely neutralize 5.1 mL of the acid?
March 23, 2011 by Bruce

Chemistry
Calculate pH of a solution by mixing 15.0 mL of .50 M NaOH and 30.0 mL of .50 benzoic acid solution (benzoic acid is monoprotic, its dissociation constant is 6.5 x 10^ -5). I am not sure whether I am supposed to do it by acid-base titration way or to use the formula -log (Ka...
July 28, 2009 by Soojung

chemistry
Describe how to prepare a 1M solution of sodium hydroxide from concentrated sodium hydroxide (17.6 M)
February 8, 2010 by Jay

chemistry!
determine the pH of the following mixture. 50.0 mL of 0.0260 M Benzoic acid and 0.626 g of sodium benzoate (assume the final volume is 50.0 mL) please explain the steps
December 15, 2010 by Lori

chemistry
A buffer with a pH of 3.93 contains 0.17 M of sodium benzoate and 0.32 M of benzoic acid. What is the concentration of [H ] in the solution after the addition of 0.054 mol of HCl to a final volume of 1.5 L?
November 4, 2014 by Kira

chemistry
Determine the pH (to two decimal places) of a solution prepared by adding 395 mL of 0.0360 M benzoic acid (C6H5COOH) to 12.5 g of sodium benzoate (NaC6H5COO).
November 29, 2014 by fati

Chemistry
I don't understand ice table at all..can anyone please guide me in how to solve the following question? : The pH of a 0.00250 mol/L solution of benzoic acid is 3.65. Calculate the Ka for the benzoic acid. (This question does not state that the given concentration is an ...
June 15, 2010 by Jessica

chemistry
If an aqueous solution of sulfuric acid (H2SO4) is neutralized by 3.20 mol of sodium hydroxide (NaOH), how many moles of acid were originally present in the solution?
May 10, 2011 by Anonymous

Biochemistry
Explain how to prepare 1L of a buffer at pH 7.4 using 1M hypochlorous acid (Ka = 3.5 x 10-8) and a 1 M NaOH solution. Indicate the volume of hypochlorous acid and sodium hydroxide to use.
March 12, 2013 by Jen

Biochemistry
Explain how to prepare 1L of a buffer at pH 7.4 using 1M hypochlorous acid (Ka = 3.5 x 10-8) and a 1 M NaOH solution. Indicate the volume of hypochlorous acid and sodium hydroxide to use.
March 13, 2013 by Jen

chemistry
What mass in grams of sodium hydroxide is produced if 20.0 g of sodium meal reactts with excess water according to the chemical equation 2 Na(s)+2 H2O(l)=2 NaOH(aq)+H2(g)?
April 23, 2008 by Anonymous

Chemistry
what mass in grams of sodium hydroxide is produced if 20.0g of sodium metal reacts with excess water according ro the chemical equation, Na(s)+H2O4->naoh(aq)+h2(g)
March 10, 2013 by Fatima

Science
Hydrochloric acid and sodium hydroxide are mixed together to form salt and water. During the reaction, the temperature of the solution increases. Which of these best explains why this is considered to be a chemical change? No energy was destroyed. Heat was given off. It ...
August 2, 2011 by Anonymous

chemistry
2. Baking soda is sodium bicarbonate (NaHCO3). When you heat baking soda, it breaks down into sodium carbonate powder (Na2CO3), water vapor, and carbon dioxide. The enthalpy of this reaction is 129 kJ. Write a correct thermochemical equation for this reaction, explain how you ...
May 14, 2012 by dd

chemistry
what is the chemical balance equation for the following: Magnesium metal and hydrochloric acid copper matal and hydroshloric acid potassium hydroxide and acetic acid
January 18, 2012 by Chemistry

Chemistry
Stomach acid is 0.02M HCl. A 330mg antacid tablet is 41% magnesium hydroxide and 36.2% sodium Bicarbonate. What is the volume of acid that can be neutralized by one tablet?
May 21, 2011 by Alex

Chemistry
Stomach acid is 0.02M HCl. A 330mg antacid tablet is 41% magnesium hydroxide and 36.2% sodium Bicarbonate. What is the volume of acid that can be neutralized by one tablet?
May 21, 2011 by Alex

chemisry
Q2. Distinguish between the following- 1. CH3OH and C2H5OH 2. Phenol and methanol 3. 1-Propanol and 2-Methyl-2-propanol 4. Ethenol and 1-propanol 5. Propanol and propanone 6. Acetaldehyde and benzaldehyde 7. Benzaldehyde and benzoic acid 8. Propanoyl Chloride and propanoic ...
July 7, 2013 by neha

chemistry
1L of a buffer composed of acetic acid and sodium acetate has a pH of 4.3. Adding 10mL of 2M sodium hydroxide solution to 100mL of this buffer causes the pH to rise to 4.87. what is the total molarity of the original buffer?
March 10, 2013 by stephanie

Chemistry
I don't really understand how to do this problem, or where to start exactly. Can someone explain to me where to start and how I can solve the problem in a step by step process? Thank you in advance! 1. An acetic acid / sodium acetate buffer solution is also 0.020 M AlCl3. The ...
March 25, 2014 by Aaron

chemistry help !!!!!!!!!!!!!!!!
Benzoic acid react with NH2 group Draw the product of this reaction, name the new functional group produced, state the type of reaction that has occurred, name any other products of the reaction and briefly explain how you arrived at your answer.( one or two sentences.)
January 21, 2013 by john

cheistry
Write a net ionic equation for the overall reaction that occurs when aqueous solutions of hydrosulfuric acid and potassium hydroxide are combined. Assume excess base.
November 17, 2011 by savannah

Organic Chemistry 1
Write an equation for the reaction of sodium bicarbonate with aqueous sulfuric acid to produce carbon dioxide.
March 17, 2010 by Brianna

Chemistry
Calculate the pH of a buffered solution that is 0.100M in C6H5COOH (benzoic acid, Ka = 6.4 x 10-5) and 0.100M in sodium benzoate (NaC6H5COO).
May 5, 2010 by Rachel

Organic Chem/ Aldol Products
Can anyone tell me what the aldol product would be from a reaction of butanal and sodium hydroxide? I also would like to know what the aldol product would be from a reaction of cyclopentanone and sodium hydroxide and the aldol product from a reaction of acetophenone and sodium...
March 7, 2007 by Steve

Chemistry
20 ml of 0.1 M acetic acid was mixed with 25 ml of 0.1 M Sodium Acetate. The pH was measured to be 4.43. 5 ml of 0.1 M Sodium Hydroxide was added to the buffer and the pH was measured to be 4.60. Calculate the pH of the buffer before and after the addition of NaOH.
March 25, 2013 by Annie

Chemistry
Separating a mixture of benzoic acid, acetanilide in dichloromethane An over zealous student decided to conduct this experiment by distilling all the dicholoromethane at the very beginning and then separating the solid residue of benzoic acid and acetanilide by ...
January 23, 2013 by Simone

chemistry
I need to write a balanced equation and indicate the type of reaction phosphoric acid + magnesium hydroxide= magnesium phosphate+ water
July 25, 2012 by Branden

Chemistry
a paste of sodium hydrogen carbonate (sodium bicarbonate) can be used to relieve the pain of an ant bite. The irritant in the ant bite is formic acid (HCOOH), a weak acid. Which is the net ionic equation for the reaction that occurs? I know the reactants are NaHCO3 + HCOOH and...
October 12, 2010 by Logan

chemistry
hi, i am trying to develop a lab where i find the solubility of Sodium acetate. I was wondering in i was in the right path. We are given these three compounds: Acetic acid aka vinegar baking soda (sodium hydrogen carbonate) 0.100mol/l Naoh(aq) 0.100/l HCL(aq) So we are not ...
June 2, 2008 by chemistrybuddy

Chemistry
What is the final product of citric acid combined with sodium hydroxide
March 10, 2008 by Amanda

chemistry
double indicator titration of phosphoric acid with sodium hydroxide
March 11, 2010 by Anonymous

Chemistry
What volume of 3.0M sodium hydroxide will be needed to neutralize 2.0 L of 1.0M hydrochloric acid?
March 21, 2012 by Laurie

Chemistry
Question: Consider the titration of 30.00 ml of .360 M. H2C6H6O6 (abscorbic acid; K1= 6.8e-5; K2=2.8E-12) solution with .280M NaOH. Note the weak acid, H2C6H6O6, is being titrated with the strong base, sodium hydroxide. the neutralization reaction are: H2C6H6O6 + NaOH goes to ...
April 19, 2009 by Anonymous

Chemistry
Can someone check my answers for me thank you. I have the equation balanced below. 2H2O + K2SO4 --> H2SO4 + 2KOH Ionic equation for the reaction between sulfuric acid and potassium hydroxide. 2H+ + SO4^2- + 2K+ + 2OH- --> 2K+ + SO4^2- + 2H2O Net equation would be: 2H+ + ...
January 13, 2008 by Susie

Chemistry
Suppose you are going to add 450 mL of a 0.10 mol/L hydrochloric acid solution to 250 mL of a 0.2 mol/L sodium hydroxide solution. a)Which one is the limiting reactant? b)What is the theoretical yield of sodium chloride?
December 10, 2011 by Maame

Chemistry II
A total of 30.6 g of potassium hydrogen phthalate is needed to completely neutralize a 500.0 mL solution of sodium hydroxide. What is the molarity of the sodium hydroxide solution?
October 21, 2009 by Mandy

CHEM-102
Calculate the pH of a solution prepared by mixing 10.00mL of 0.50M NaOH and 20.00mL of 0.50M benzoic acid solution. (Benzoic acid is monoprotic; its ionization constant is 6.7x10^-5).
March 27, 2011 by Christian

Chemistry
What volume (mL) of a concentrated solution of sodium hydroxide (2.00 M) must be diluted to 600.0 mL to make a 0.860 M solution of sodium hydroxide? Express your answer to the nearest tenth mL.
March 10, 2010 by Camarra

general chem
what is the mass percent of sodium hydroxide in a solution that is made by dissolving 8 grams of sodium hydroxide in 50 grams of h2o answer
July 7, 2014 by Anonymous

chemistry
predict the order of increasing acidity of the compounds. Give a brief explanation why. Butanoic acid-Nexanoic acid-Benzoic acid-Acetic acid. thx
November 6, 2010 by david

Chemistry
What would you do in order to solve this question: "The enthalpy of combustion for benzoic acid is -3223.6kj/mol. Use the values of the standard enthalpies of formation of liquid water and CO2 to calculate standard enthalpy of formation of benzoic acid."
November 29, 2014 by Kylie

Chemistry
what are the other chemistry forms present in the dichloromethane solution besides the normal neutral forms for benzoic acid and quinine? (benzoic acid,pKa 4.2; quinnie, pKa 8.5)
March 31, 2009 by Nancy

Chemistry
An etheral solution contains benzoic acid, 9-fluorenone, abd ethyl 4-aminobenzoate. Why would benzoic acid and 9-fluorenone not be extracted from this etheral solution by aqueous HCl ?
May 15, 2012 by Samantha

chemistrybuddy
hi, i am trying to develop a lab where i find the solubility of Sodium acetate. I was wondering in i was in the right path. We are given these three compounds: Acetic acid aka vinegar baking soda (sodium hydrogen carbonate) 0.100mol/l Naoh(aq) 0.100/l HCL(aq) So we are not ...
June 2, 2008 by chemistrybuddy

chemistry
hi, i am trying to develop a lab where i find the solubility of Sodium acetate. I was wondering in i was in the right path. We are given these three compounds: Acetic acid aka vinegar baking soda (sodium hydrogen carbonate) 0.100mol/l Naoh(aq) 0.100/l HCL(aq) So we are not ...
June 2, 2008 by chemistrybuddy

ochem
You have a mixture composed of 90% benzoic acid and 10% naphthalene. Benzoic acid has a melting point of 122.4 oC, while naphthalene has a melting point of 80.2 oC. You can say with certainty that the melting point of the mixture will be: A. greater than any of the two melting...
October 5, 2009 by jamees

Organic Chemistry
isopentyl alcohol is reacted with acetic acid to make isopentyl acetate through Fischer esterification. Sulfuric acid is used to assist the reaction. After the reaction, the solution is washed with sodium bicarbonate. What reactions take place during this washing? What gas is ...
July 22, 2008 by chemstudent

Ochem
A student needed to determine the percent composition of a mixture that contained fluorene and benzoic acid. The student took 283 mg of the mixture and used the extraction method to separate the components. Then both compounds were recrystallized and dried. The experiment ...
October 19, 2011 by Lindsay

Chemistry
When acetic acid reacts with sodium hydroxide, what are the two products that are formed?
February 18, 2009 by Eileen

Chemistry
How many mL of .150 M sodium hydroxide is required to neutralize 25 mL of .125 M of phosphoric acid?
March 26, 2012 by Kate

Chem
How many mL of .150 M sodium hydroxide is required to neutralize 25 mL of .125 M of phosphoric acid?
March 26, 2012 by Kate

physical science
what is observed during an experiment of oxalic acid and sodium hydroxide
July 28, 2014 by Anonymous

chemistry
Predict the products and then write the complete balanced chemical equation with states of matter: 1. Sulfuric Acid and sodium hydroxide 2. Aluminum and copper (II) sulfate 3. Silver nitrate and iron (III) chloride 4. Magnesium heated 5. Aluminum oxide
February 8, 2011 by Graham

Chemistry
calculate the concentration of sodium benzoate that must be present in a 2.0M solution of benzoic acid (C6H5COOH) to produce a pH of 4.00. THIS IS THE ONLY INFORMATION GIVEN. I CANNOT FIND Kb ANY WHERE IN MY TEXT NOR DOES IT GIVE US A VOLUME. CAN ANYONE HELP?
May 27, 2010 by Lucinda

Chemistry
An structural isomer of bromobutane (C4H9Br) can be hydrolysed using aqueous sodium hydroxide to produce butanol. This can be represented by the following equation: C4H9Br(l) + OH-(aq)  C4H9OH(l) + Br-(aq) This reaction was investigated experimentally and the following...
April 3, 2012 by turner

chemistry
acetic acid: 0.1 M 30ml hydrochloric acid 0.1 M 5 ml sodium hydroxide 0.1 M 15 ml Buffer + 5ml of: 1.91 ph ph (measured): 4:52 ph HOW DO I CALCULATE PH(CALCULATED)? AND ALSO IT SAYS SHOW YOUR CALCULATION FOR THE PH OF THE BUFFER BEFIRE AND AFTER THE ADDITION OF HCL? COULD YOU ...
July 14, 2012 by fenerbahce

Chemistry
I'm having a hard time with a question predicting the reaction (if any) of 1,2-dichloroethane and sodium iodide, sodium iodate, and sulfuric acid. Any suggestions? Thanks!
November 16, 2010 by Becky

Chemistry
I'm having a hard time with a question predicting the reaction (if any) of 1,2-dichloroethane and sodium iodide, sodium iodate, and sulfuric acid. Any suggestions? Thanks!
November 16, 2010 by Becky

Chemistry h/w
Hi, this is my first lab in 2nd semester of chemistry, and im not sure about my answers in the assignment can someone give it a quick look to check them? this is my phase diagram: tinypic. com/view.php?pic=1605yev&s=7 p.s. ignore the lone red dot its supposed to be 38C.. there...
September 21, 2010 by Jessie

chemistry h/w
Hi, this is my first lab in 2nd semester of chemistry, and im not sure about my answers in the assignment can someone give it a quick look to check them? this is my phase diagram: tinypic. com/view.php?pic=1605yev&s=7 p.s. ignore the lone red dot its supposed to be 38C.. there...
September 21, 2010 by Jessie

Chemistry
The combustion of benzoic acid releases 26.38kJ/g and is often used to calibrate a bomb calorimete. The combustion of 1.045g of benzoic acid caused the temperature of the calorimeter to rise by 5.985 degreeC.Using the same calorimeter, a sample of 0.876g of C8H18 was burned. ...
October 9, 2009 by Sindy

Chemistry
When 2.25 g of sodium hydroxide (NaOH) was dissolved in 150.00 g of water a value of 11.00oC was obtained for ΔT. 1. Calculate the molarity of the sodium hydroxide solution. 2. Calculate the value (calories) for the heat of solution of 2.25 g of NaOH. 3. Calculate the ...
October 20, 2014 by Kales

chemistry
A 0.25 mol/L solution of benzoic acid, KC7H5O2 and antiseptic also used as a food preservative, has a pH of 2.40. Calculate the Ka of benzoic acid at SATP My work: C6H5COOH --> C6H5COO^- + H^+ Ka = (C6H5COO-)(H+)/ C6H5COOH I know my next steps are to use pH = log(H+) to ...
April 7, 2008 by Dustin

Chemistry
Hello! I am having a little difficulty answering these two questions on my homework, I was wondering if anyone could please help me out! Thank you! 1) Consider the following balanced chemical equation for the neutralization reaction of calcium hydroxide with hydrochloric acid ...
November 30, 2013 by T.C.

physical science(chemistry change)
Experiment of tiratic oxilic acid wih mass 4,5g and volume of 25ml,nd concentration of 0,05mol.dm.3 against volume of 14ml and 1,79mol.dm3 sodium hydoxide to determine the concentration of sodium hydroxide,,
June 12, 2014 by dineo

chemistry
Consider the Ka values for the following acids: Cyanic acid, HOCN, 3.5 10-4 Formic acid, HCHO2, 1.7 10-4 Lactic acid, HC3H5O3, 1.3 10-4 Propionic acid, HC3H5O2, 1.3 10-5 Benzoic acid, HC7H5O2, 6.3 10-5 Which of the following is the weakest base? is it propanionic i ...
May 26, 2010 by michael

Chemistry III
Assume you dissolve 0.240 g of the weak acid benzoic acid, C6H5CO2H, in enough water to make 1.16 102 mL of solution and then titrate the solution with 0.153 M NaOH. C6H5CO2H(aq) + OH -(aq) C6H5CO2-(aq) + H2O(l) (a) What was the pH of the original benzoic acid solution? (b) ...
March 27, 2012 by Kelly

chemistry
What salt is formed when sodium hydroxide is neutralized by perchloric acid? NaOH + HClO4 -> ?
December 14, 2009 by Home schooled

Chemistry
How many milliliters of 0.250 M sodium hydroxide are needed to titrate 35.0 mL of 0.425 M hydrofluoric acid?
December 1, 2011 by Victoria

chemistry
A solution of sodium hydroxide is 8.20M and has a density of 1.20g/mL. What is the mole fraction of sodium hydroxide in the solution?
December 8, 2011 by Joe

Chemistry
Given the reactant side of the total ionic equation for the neutralization reaction of ammonium hydroxide (NH4OH) with hydrochloric acid (HCl), write the total ionic equation (also known as the complete ionic equation) by entering both the reactant and the product species, ...
January 27, 2014 by Taylor

Chemistry
Calculate the pH at the equivalence point of 25.0 mL of a 0.100 M acetic acid, CH3COOH, titrated with a 0.100 M sodium hydroxide, NaOH. Ka of acetic acid is 1x10^-5
April 11, 2010 by Anonymous

Chemistry
A solution of .12 mol/L of phosphoric acid completely neutralizes .20L of a solution of sodium hydroxide with.a concentration of .15mol/L What is the neutralizing volume of the phosphoric acid?
April 27, 2012 by Kelly

Organic Chem
Write the balanced equation for dibenzalacetone and benzoic acid
October 10, 2011 by Ruth

Chemistry
when benzoic acid and quinine is dissolved to dichlromethane and 2M NaOh, what is the organic layer being formed? (i have sodium benzoate as aqueous layer of the product. is this right?)
April 1, 2009 by Nancy

Chemistry AP
What are the concentrations of benzoic acid and sodium benzoate in a solution that is buffered with a pH of 4.55 and has a freezing point of -2.0 degrees Celsius? (assume complete dissociation and a density of 1.01g/mL for the solution.)
February 5, 2014 by Cj

chemistry
what is the net ionic reaction for coppper(II)chloride and sodium hydroxide?
October 2, 2007 by Avonlea

organic chemistry
in a reaction with 9-fluorenol and sodium hypochlorite (with acetic acid) that is supposed to yield 9-fluorenone, what could be a possible reason for error if the solution of 9-fluorenol, sodium hypochlorite, and acetic acid was heated too high? (around 80 degrees if the ...
February 12, 2009 by Anonymous

Chemistry
I was asked to write up the experiment that we did in class, but i was absent that day, and i really don't know anything about it, could someone plese help me, the title of the experiment says : To obtain a pure sample of benzoic acid form an impure sample by the technique of ...
October 26, 2009 by Wiola

Chemistry
In a reaction between pure acetic acid and sodium bicarbonate, 14.7 grams of sodium bicarbonate was added to 21.0 mL of acetic acid. Which reactant is the limiting reactant in this reaction? Name of limiting reactant (acetic acid or sodium bicarbonate): How many moles of the ...
September 13, 2013 by Kayla

Chemistry
If 43.2 mL of 2.46 M HClO4 solution completely reacts with a 75.0 mL sample of a sodium hydroxide solution, what is the molarity of the sodium hydroxide solution? (hint: write the complete balanced rxn)
October 10, 2014 by Diane

Chem
The fizz produced when an alka-seltzer tablet is dissolved in water is due to the reaction between sodium bicarbonate and citric acid: 3NaHCO3 + H3C6H5O7 -> 3CO2 + 3H2O + Na3C6H5O7 In an Experiment 1.00 g of sodium bicarbonate and 1.00g of citric acid are allowed to react? ...
October 20, 2013 by Lu

Chemistry
What volume of 0.5 N nitric acid would be required to completely neutralize 300 ml of 1.0 N sodium hydroxide?
October 6, 2010 by Jeff

Chemistry
What volume of 0.5 N nitric acid would be required to completely neutralize 300 ml of 1.0 N sodium hydroxide?
October 9, 2010 by Sara

chem 101
how many grams of oxalic acid dihydrate to completely neutralize 25ml of 0.12 M of sodium hydroxide
October 18, 2010 by andrew

Chemistry
Calculate the [H+] of a solution obtained by mixing 1 L of hydrochloric acid 1.0 M with 1 litre of sodium hydroxide 0.990 M.
May 11, 2012 by Katie

chemistry
what volume of .025 M hydrochloric acid will neutralize 150 milliliters of .0133 M sodium hydroxide?
January 24, 2013 by jessica

Chemistry
How many mL of 0.976 M sodium hydroxide, NaOH, are necessary to completely neutralize 46 mL of sulfuric acid, H2SO4?
May 28, 2013 by Anonymous

Science
What volume of 0.050M sodium hydroxide is needed to react with 25cm3 of 0.068M ethanoic acid?
November 26, 2014 by Connor

Chemistry
Considering the tube wherein NaOH (1 M) was added to benzoic acid. a) what reaction would occur in the tube? b) write a balance equation that supports your explanation above? c) describe what would happen if u added HCL (6 M) to the same tube?
February 5, 2009 by AMY

Chemistry
A precipitate will be formed when an aqueous carbonic acid soution is added to what other aqueous solution? A. ammonium chloride B. calcium hydroxide C. Sodium Chloride D. Potassium carbonate E. Nitrous acid
June 19, 2010 by Ellie

science
the melting point of pure benzoic acid and pure naphthol are 122.5 and 123 degree Celsius respectively. you are given a pure sample that is known to be either pure benzoic acid or 2- naphthol. describe a procedure you will use to determine the identity of the sample.
August 14, 2014 by inise

school
What is the pH of 0.1 M formic acid solution? Ka=1.7e10-4? What is the pH value of buffer prepared by adding 60 ml of 0.1 M CH3COOH to 40 ml of a solution of 0.1 M CH3COONa? What is the pH value of an acetate buffer (pK=4.76) prepared by adding 20 ml of 1 M HCl to 100 ml of a...
December 11, 2011 by alshammari

CHemistry
a capsule of vitamin C.. a weak acid, is analyzed by titrating it with 0.425 M sodium hydroxide. it is found that 6.20 Ml of base is required to react with capsule weighing 0.628 g. what is the percentage of vitamin C (C6H8O6) in the capsule?( one mole of vitamin C reacts with...
October 22, 2008 by Komal

Chemistrey
Lab exercise 10C Calibrating bomb Calorimeter Before Molar specific enthalpies of reaction can be determined, a bomb calorimeter must be calibrated using primary standard of precisely known molar enthalpy. Complete the analysis of the investigation report. Problem: What is the...
April 4, 2007 by Calorimeter

Chemistry
Which of the following is true about the reaction between sodium bromide and silver sulfate? 1. No reaction 2. Total ionic equation is identical to the net ionic equation 3. Sodium ions and sulfate ions are present in the toal ionic equation but not in the net ionic equation 4...
May 11, 2011 by Gina

CHEMISTRY (HELP)
Which of the following is true about the reaction between sodium bromide and silver sulfate? 1. No reaction 2. Total ionic equation is identical to the net ionic equation 3. Sodium ions and sulfate ions are present in the toal ionic equation but not in the net ionic equation 4...
May 11, 2011 by Gina

Pages: <<Prev | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | Next>>

Search
Members