Thursday
February 11, 2016

Search: Calculate the pH of 0.10 M aqueous solution of each of the hydrochloric and acetic acids: Complete the following table.

Number of results: 84,457

chemistry
How much of each solution will you need to mix to obtain 100 120 ml of 20 mM buffer pH 4.0? A. 35 ml sodium acetate + 90 ml acetic acid B. 100 ml sodium acetate + 16 ml acetic acid C. 16 ml sodium acetate + 100 ml acetic acid D. 90 ml sodium acetate + 35 ml acetic acid
September 12, 2014 by saraly

chemistry
A 0.1943g iron ore sample was dissolved in hydrochloric acid and the iron was obtained as Fe 2+ (aq). The iron solution was titrated with Ce 4+ solution according to the balanced chemical reaction shown below.After calculation, it was found that 0.0237 g of iron from the ore ...
October 17, 2010 by matt

chemistry
The quantity of antimony in an ore can be determined by an oxidation-reduction titration with an oxidizing agent. The ore is dissolved in hot, concentrated acid and passed over a reducing agent so that all the antimony is in the form Sb3 (aq). The Sb3 (aq) is completely ...
February 24, 2012 by Katie

Chemistry
Q1. A 0.5 g mixture of Cu2O and CuO contain 0.425 g Cu. What is the mass of CuO in the mixture? Q2. A chemist wants to prepare 0.5 M HCl. The label of a commercial hydrochloric acid shows that S.G. =1.18 and concentration of HCl was 37%. Calculate the volume of commercial ...
October 28, 2014 by Adem Rutger

chemistry
Calculate the hydrogen ion concentration and the pH of each of the following solutions of strong acids. (a) 0.00010 M HCl if you could just explain how to do this that would be great! thanks
March 23, 2009 by lyne

chemistry
Titration was used to determine the molarity of acetic acid in vinegar. A primary standard solution of KHP was used to standardize the NaOH. 1. When performing this experiment, impure KHP was used to standardize the NaOH solution. If the impurity is neither acidic or basic, ...
March 11, 2014 by Sandy

Organic Chemistry
calculate how much of 10% aqueous sodium carbonate would be required to neutralize the solution (This is during the preparation of benzocaine)
April 3, 2012 by Emma

Chemistry
An aqueous KNO3 solution is made using 72.5 grams of KNO3 diluted to a total solution volume of 2.00 liters. If the molarity of the solution is .359 M and the molality of the solution is .354, what is the mass percent of the solution?
February 19, 2012 by Adam

Chemistry
Caprytic acid, also called octanoic acid, is an 8-carbon fatty acid that is used as a sanitizer on dairy equipment that comes in contact with milk. The acid has a molar mass of 144.21 g/mol. An aqueous solution of the sanitizer containing 12.25 g/L has a pH of 2.98. What is ...
January 5, 2014 by Anonymous

chemistry
Concentrated hydrochloric acid is a 38% solution of hcl in water and has a density of 1.18g/ml. How many milliliters of concentrated hydrochloric acid are needed to prepare 500ml of a 1:200 hcl solution? My calculation 500ml x 1:200 =2.5 1:200 means 1gm/200ml 2.5 x 36.5 = 91....
August 9, 2012 by Fai

chemistry
For the following: a)give the reaction type; b)complete and balance the reaction; c)using your answer to part b, determine how much of the other reactant is needed, and how much of each product will be formed, for the given starting amount (below); and d) calculate the percent...
February 18, 2008 by stephen

sceince 2
6. When aqueous solutions of table salt and silver nitrate are mixed, a white solid forms. This solid is ____. (1 point)soluble a precipitate an alloy a solute 7. Stainless steel is an example of a ____ solution. (1 point)liquid-solid solid-liquid solid-solid gas-solid 8. ...
April 17, 2012 by NIKE

chemistry
a 10.0mL vinegar sample was completely neutralized by 22.5mL 0.2M NaOH solution. calculate molarity and % of acetic acid in vinegar. please help
April 26, 2010 by confused

Chemistry
Arrange the following aqueous solutions in order of increasing boiling point, explain your answer: 0.120 m glucose (C6H12O6), 0.05 m LiBr, 0.05 m Zn(NO3)2. Using data the boiling point constants given in the test book, calculate the boiling points of each of the above aqueous ...
February 15, 2013 by m

ap chemistry
How many moles of sodium acetate (NaCH3COO) must be added to 1.000 liter of a 0.500M solution of acetic acid (CH3COOH) to produce a pH of 5.027? The ionization constant of acetic acid is 1.8 10−5. Answer in units of mol
February 4, 2014 by gabriella

chemistry
Please judge my answer: Question: 24 mL of 0.39 mol/L acetic acid is titrated with a standardized 0.33 mol/L KOH solution. Calculate the pH of the solution after 17 mL of the KOH solution has been added. Assume the Ka of acetic acid is 1.8 x 10-5. Answer: The equation for this...
April 15, 2008 by Abigail

Chemistry
If 20ml of glacial acetic acid (pure HC2H3O2) is diluted to 1.5L with water, what is the pH of the resulting solution. The density of glacial acetic acid is 1.08g/ml
August 2, 2010 by Kristen

chemistry
Carbonates react with acids to form a salt, water and carbon dioxide gas. When 25.4 g of calcium carbonate are reacted with sufficient hydrochloric acid, how many grams of calcium chloride will be produced?
April 25, 2012 by Lau ra

Chemistry
Carbonates react with acids to form a salt, water and carbon dioxide gas. When 22.1 g of calcium carbonate are reacted with sufficient hydrochloric acid, how many grams of calcium chloride will be produced?
February 28, 2014 by Doreen

Chemistry
Experimental results for hydrochloric acid (neutralization) are always a little less negative than the usual constant of heat of neutralization for strong acids and bases (-57.35kJ). Suggest reasons for this.
November 17, 2015 by Wex

Some Lab Question (s)
Yes...another calculation problem. Rxn: 1ml isopentyl alcohol + 1.5ml glacial acetic acid + 3 drops sulfuric acid=> isopentyl acetate to calculate the theoretical yield.. I know that the acetic acid is in excess but how would I calculate the theoretical yield? is it just ...
March 8, 2008 by ~christina~

chemistry
If 15.0 mL of a 1.5M HCl solution at 22.5 degrees C is mixed with 25.0mL of a 1.5M NaOH solution at 21.5 degrees C that is in a calorimeter, and the final mixed solution temperature ends up at 28.5 degrees C, 1.)what is the balanced equation for this reaction? 2.) what is the ...
April 13, 2014 by Alison

Chemistry
100 mL 0.1 M sodium acetate solution is mixed with 50 mL 0.1 M acetic acid. If now 0.937 mL of 1 M sodium hydroxide is added to the buffer what is the change in pH? pKa (acetic acid) = 4.76
January 9, 2016 by Jamie

College Chem.
If 20.0 mL of glacial acetic acid (pure HC2H3O2) is diluted to 1.30 L with water, what is the pH of the resulting solution? The density of glacial acetic acid is 1.05 g/mL.
March 8, 2010 by Katherine

Chemistry
What is the hydrogen-ion concentration of a solution that is 0.016M in acetic acid and 0.016M in sodium acetate at 25 Celsius? The Ka for acetic acid is 1.8x10^-5
March 22, 2013 by Viv

Chemistry
To titrate the acetic acid in 10.0 mL of vinegar sample, 25.5mL of 0.5M sodium hydroxide solution is needed. What is the concentration of acetic acid in the vinegar?
April 30, 2015 by Anonymous

Chemisty
Calculate the mass of water in grams that could be produced from the reaction of 10.00mL 0.4122M hydrochloric acid and 35.00mL 0.1738M sodium hydroxide solution. Identify the limiting reactant.
February 28, 2012 by Missy

CHEMistry
A 2.50-g sample of powdered zinc is added to 100.0 mL of a 2.00-M aqueous solution of hydrobromic acid in a calorimeter. The total heat capacity of the calorimeter and solution is 448 J/K. The observed increase in temperature is 21.1 K at a constant pressure of one bar. Using ...
March 27, 2013 by HELP

chemistry
A 2.50-g sample of powdered zinc is added to 100.0 mL of a 2.00-M aqueous solution of hydrobromic acid in a calorimeter. The total heat capacity of the calorimeter and solution is 448 J/C. The observed increase in temperature is 21.1 C at a constant pressure of one atm. ...
October 27, 2013 by brianna

chemistry
When varsol and iodine in potassium iodide aqueous solution is mixed, two phases form. What are the colours in each of the 2 phases when 2ml of I2/KI aqueous solution plus 2 ml of varsol are mixed in a test tube? What are the colours in each of the 2 phases when each of the ...
February 15, 2011 by Andrea

chem
When varsol and iodine in potassium iodide aqueous solution is mixed, two phases form. What are the colours in each of the 2 phases when 2ml of I2/KI aqueous solution plus 2 ml of varsol are mixed in a test tube? What are the colours in each of the 2 phases when each of the ...
March 1, 2011 by crystal

chemistry
for an aqueous solution having Calcl2 (2molar) and Mgcl2 (5molal) and specified gravity of solution is 1.145 calculate molality of chloride ion and molality if chloride ion.
May 10, 2013 by riya

General Chemistry
I add 5 drops Potassium Iodide (KI) to 5 drops lead nitrate (PbNO3). The solution is centrifuged and the aqueous layer is discarded. I then add 5 drops of nitric acid (HNO3), 5 drops of hydrogen peroxide and 10 drops of dichloroethane (C2H4Cl2) to the precipitate. The solution...
October 8, 2012 by Kay

ANALYTICAL CHEMISTRY
3. How many moles of HCl are required to make 15.00 mL of an aqueous 2.500 molar HCl solution? How many moles of Cl- are in 1.000 mL of the aqueous 2.500 molar HCl solution mentioned above? How many moles of H+ are in 1.000 mL of the aqueous 2.500 molar HCl solution mentioned ...
May 6, 2012 by JONESTONE

ANALYTICAL CHEMISTRY
3. How many moles of HCl are required to make 15.00 mL of an aqueous 2.500 molar HCl solution? How many moles of Cl- are in 1.000 mL of the aqueous 2.500 molar HCl solution mentioned above? How many moles of H+ are in 1.000 mL of the aqueous 2.500 molar HCl solution mentioned ...
May 6, 2012 by JONESTONE

chemistry
If 15.0 mL of glacial acetic acid (pure HC2H3O2) is diluted to 1.50 L with water, what is the pH of the resulting solution? THe density of glacial acetic acid is 1.05 g/mL
July 16, 2010 by Danielle

Chemistry
How do these react? Some may have no reaction. a. aqueous chromium(III) nitrate plus magnesium metal b. aqueous lithium sulfate plus aqueous barium chloride c. solid lead metal plus aqueous potassium chloride d. aqueous lithium fluoride with aqueous ammonium phosphate
April 4, 2011 by Blaire

chemistry
I need to calculate the Ka of the acetic acid from two titration curves involving acetic acid. Then report the % error in each how do i go about this? what values do i need to know?
May 9, 2008 by Amy

Chemistry
Calculate the pH at the equivalence point of 25.0 mL of a 0.100 M acetic acid, CH3COOH, titrated with a 0.100 M sodium hydroxide, NaOH. Ka of acetic acid is 1x10^-5
April 11, 2010 by Anonymous

Chemistry
Concentrated hydrochloric acid is a 38% solution of HCL in water and has a density of 1.18g/ml. How many milliliters of concentrated hydrochloric acid are needed to prepare 500ml of 1:200 HCL solution? The answer is not 2.12ml My calculation: 1.18g/ml x 1000ml x 0.38/36.5 = 12...
July 29, 2012 by Fai

chemistry
Calculate the approximate pH of a 0.1 M solution of ethanoic acid at 298 K, given that the dissociation constant, Ka, is 1.75 x 10-5 mol/L at 298 K.Ethanoic acid dissociates in aqueous solution as follows: CH3COOH(aq) + H2O H3O+(aq) + CH3COO-(aq)
April 28, 2015 by Emily

Chemistry
A 5.00 mL aliquot of vinegar (acetic acid, FW = 63 g/mol) was diluted and titrated with 0.1104 M NaOH requiring 32.88 mL. If the vinegar has a density of 1.055 g/mL, calculate its acidity as % acetic acid
June 22, 2014 by Rick

chemistry
in an experiment, a 4.000grams sample of aluminum metal is added to a solution containing 5.000grams of dissolved iron chloride. the reaction results in the formation of aluminum chloride and metallic iron. when the reaction is complete, unreacted aluminum remains, and this ...
March 26, 2014 by Anonymous

chemistry
25ml of a solution of na2c03 having a specific gravity of 1.25g ml required 32.9ml of a solution of hcl containing 109.5g of the acid per litre for complete neutralization. Calculate the volume of 0.84N heso4 that will be compltetly neutralized by 125g of na2c03 solution The ...
February 17, 2013 by Fai

Chemistry
What will be the pH of: (a)10.0cm3 of an aqueous solution of 0.001mol dm^-3 nitric aicd, HNO3 (aq)? (b)100cm3 of an aqueous solution of 0.001mol dm^-3 nitric aicd, HNO3 (aq)? (c)0.02mol dm^-3 of potassium hydroxide solution, KOH (aq)? For (a) I got 2, (b) 1 and (c) 12.31. I am...
November 17, 2009 by Anonymous

chem
what is a liquid solution and a gaseous solution? Do you intend to ask us to name a liquid solution and a gaseous solution. One example of a liquid solution is vinegar. It is acetic acid in water. That is a solution of two liquids. An example of a gaseous solution is air. ...
May 14, 2007 by revie

chemistry
The pKa for hydrochloric acid is −6.0. What is the concentration of HCl(aq) we would expect to find in a 1 M solution of hydrochloric acid? What pH would we expect? how do you solve this problem?
July 6, 2010 by Jin

Chemistry
20.2 mL of 0.234 M FeCl3 is added to 42.5 mL of 0.453 M NaOH. Iron(III) hydroxide precipitates. NaCl remains in aqueous solution. 1) What mass (in g) of Fe(OH)3 should precipitate (assuming 100% yield)? 2) How many moles of the excess reactant remain after the reaction is ...
November 23, 2010 by Lilly

chemistry
Can Anyone Help Me With This Solubility Problem? An aqueous solution of 1.90 M AgNO3 is slowly added from a buret to an aqueous solution of 0.0100 M Cl- and 0.250 M I-. a) Which ion, Cl- or I-, is the first to precipitate? b) When the second ion begins to precipitate, what is ...
April 21, 2010 by anonymous

chemistry
A chemist must dilute of M aqueous magnesium fluoride solution until the concentration falls to M . He'll do this by adding distilled water to the solution until it reaches a certain final volume. Calculate this final volume, in liters
December 3, 2012 by jay

Chemistry I - University
Suppose 5.87 g of barium acetate is dissolved in 300. mL of a 71.0 m M aqueous solution of sodium chromate. calculate the final molarity of barium cation in the solution. You can assume the volume of the solution doesn't change when the barium acetate is dissolved in it...
September 27, 2015 by Jessica

Acids and Bases
NaOH was added to 1.0 L of HI(aq) 0.40 M. Calculate H3O in the solution after the addition of .14 mol of NaOH. Calculate H3O in the solution after the addition of 0.91 mol of NaOH.
March 23, 2011 by Kaitlyn

chemistry
A student prepares a solution of hydrochloric acid that is approximately 0.1 M and wanted to determine its precise concentration. A 25.00 mL portion of the HCl solution is transferred to a flask, and after a few drops of indicator are added, the HCl solution is titrated with 0...
June 14, 2015 by walter

Chemistry
A 100.0 mL sample of a 0.200 molar aqueous solution of K2CrO4 was added to 100.0 mL of a 0.100 molar aqueous solution of BaCl2. The mixture was stirred and the precipitate was collected, dried carefully, and weighed. How many grams of precipitate should be obtained? The ...
December 1, 2014 by Danielle

chemisrty
1 When chemicals pour on the skin, the laboratory first aid is to ---------------. Apply 1% sodium carbonate Apply 1% boric acid solution Flush the eye with a copious amount of clean lukewarm running water Wash with soap and warm water 2 For cut sustained in the laboratory ...
August 24, 2015 by mikel

Chemistry
What is the % mass of 12 M hydrochloric acid. Density of 12 M hydrochloric acid solution is 1.18 g/mL and the density of water is 1.00 g/mL
February 15, 2013 by m

Chemistry
14.6 mL of hydrochloric acid is completely neutralized by 25.0 mL of 1.40 M sodium hydroxide, what was the hydrochloric acid mass percent (m/m) before the titration? (Density of hydrochloric acid is 1.02 g/cm3)
December 12, 2014 by Laura

chemistry
an aqueous solution of pdcl2 is electrolyzed for 27.4 seconds during this time 0.1064 g of Pd is deposited on the cathode. Calculate the average current used in the electrolysis.
July 13, 2012 by eric

university of the west indies
The pH of a 0.164 M aqueous solution of dimethylamine is 11.98. Write the ionization equation, calculate the values of Kb and pKb and comment on strength of the base....
September 19, 2012 by geeta

chemistry
A compound was found to be composed of the following amounts of elements: 20.00% wt% C, 26.64wt% O, 46.65 wt%N, and 6.71wt%H. A 6.125 grams sample of this compound dissolved in 46.205 grams of water as a solution was found to have a freezing point of -3.260C. The density of ...
April 25, 2013 by lucy

chemistry
What is the pH of an aqueous solution of 0.10 M NaHC(3)H(2)O(4)? Answer: 10.9 What I did: NaHC(3)H(2)O(4) + H(2)O--><-- Na + H(2)C(3)H(3)O(4) + OH H(2)C(3)H(3)O(4) is Malonic acid with a Ka value of 1.5*10^(-3) initial-change-equilibrium (i.c.e) table results: (x^2)/(0....
July 30, 2011 by pH levels

AP chemistry
which of the following aqueous solutions should not form a precipitate with aqueous ba(no3)2?
September 22, 2012 by Anonymous

Chemistry
work out the [OH-], [H+] and pH of the solution formed when 0.500L of 0.250 M hydrochloric acid solution is mixed with 0.500 L of a 0.250 M calcium hydroxide solution.
July 22, 2012 by Megan

chemistry
When chemicals pour on the skin, the laboratory first aid is to ---------------. Apply 1% sodium carbonate Apply 1% boric acid solution Flush the eye with a copious amount of clean lukewarm running water Wash with soap and warm water 2 For cut sustained in the laboratory ...
September 16, 2015 by onyi

chemistry
use the following data, as appropriate, to estimate the molarity of a saturated aqueous solution of Sr(IO3)2. Molarity of a saturated aqueous solution of Sr(IO3)2 Sr(IO3)2(s) delt h kJ/mol=-1019.2 delta G kJ/mol=-855.1 delta S= 234 J mol-1K-1 Sr^2+(aq) delta h= -545.8 kJ/mol ...
December 2, 2012 by Allyx3

chemistry
use the following data, as appropriate, to estimate the molarity of a saturated aqueous solution of Sr(IO3)2. Molarity of a saturated aqueous solution of Sr(IO3)2 Sr(IO3)2(s) delt h kJ/mol=-1019.2 delta G kJ/mol=-855.1 delta S= 234 J mol-1K-1 Sr^2+(aq) delta h= -545.8 kJ/mol ...
December 2, 2012 by Allyx3

Moorpark
Determine the concentration of NO3- in each of the following aqueous solutions. (Assume complete dissociation of each compound.) 0.30 M KNO3, 0.30 M Ca(NO3)2, 0.30 M Cr(NO3)3
November 22, 2015 by Nicole

Chemistry
Calculate the OH- of each aqueous solution aspirin, 5.910−4 M milk of magnesia, 1.510−9 M
June 7, 2010 by Angela

chemistry
an aqueous solution of ammonia has 0.8% NH3 by weight.calculate the NH3 molarity
March 4, 2011 by anna

Chemistry
Calculate [H3O ], [ClO4], and [OH] in an aqueous solution that is 0.130 M in HClO4(aq) at 25 C. [H+]= [ClO4-]= [OH-]=
October 20, 2011 by Sevy

Chemistry
Calculate [H3O ], [ClO4], and [OH] in an aqueous solution that is 0.130 M in HClO4(aq) at 25 C. [H+]= [ClO4-]= [OH-]=
October 20, 2011 by Sevy

chemistry
Assuming the density of a 5% acetic acid solution is 1g/ml, determine the volume of the acetic acid solution necessary to neutralize 25ml of 0.1m naoh also record this calculation on your report My calculation 1g/ml x 1000ml x 0.05/61 = 0.81M 0.81m = 25ml x 0.1 0.81m = 2.5 x= ...
September 9, 2012 by Fai

College Physics
A uniform rod of mass M = 437.0 g and length L = 37.1 cm stands vertically on a horizontal table. It is released from rest to fall. A)Which of the following forces are acting on the rod? B)Calculate the angular speed of the rod as it makes an angle θ = 45 with respect to...
November 3, 2013 by Kimmy

chemistry
Suppose that 50.0 cm3 of 2.00 M hydrochloric acid are added to 4.00 grams of zinc metal. What it the limiting reagent? How many grams of zinc are actually consumed? What is the concentration of the hydrochloric acid solution after the reaction has occurred? What mass of ...
November 8, 2010 by Fania

Chemistry Lab
Using the molarity of fromic acid (HCOOH): 0.1033 Calculate the percent by mass of fromic acid in unknown solution. Assume the density of aqueous fromic acid solution is 1.000 g/mL. Need help setting up this problem. Thank you.
May 16, 2011 by Thao

Chemistry
Calculate the pH of an aqueous solution at 25 degress C that is .41 M in phenol (C6H5OH). Ka for phenol=1.3 x 10^-10.
December 8, 2010 by Natalie

chem
What is the OH^- concentration of an aqueous solution with H^+ concentration of 10^-4M? Calculate the pOH? pls. help thanks
November 29, 2012 by Angel Locsin

Chemistry
Use the Henderson-Hasselbalch equation to calculate the pH of a buffer prepared by adding 10mL of acetic acid to 20mL of 0.10M sodium acetate (Ka= 1.75 x 10^5 for acetic acid). Please showing working out, as am confused as to how to approach this question. Thanks in advance ...
May 9, 2010 by Lois

chemistry half reactions
How do i solve this half reaction with Mg(OH)2(s) --> Mg(s)? Complete and balance the displayed half reaction in basic aqueous solution taking into account the electrons. Mg(OH)2(s) → Mg(s)
November 23, 2010 by Confused

water chemistry
35.0 mL sample of 0.150 M acetic acid (HC2H3O2) (Ka = 1.8 x 10-5) is titrated with 0.150 M NaOH solution. Calculate the pH after 17.5 mL volumes of base have been added
April 12, 2014 by matsobane frans

water chemistry
35.0mL sample of 0.150M acetic acid9HC2H3O2)(Ka=1.8*10-5) is titrated with 0.150M NaOH solution. calculate the pH AFTER 17.5 Ml volumes of base have been added.
April 22, 2014 by mbuyelo

Chem 12
Okay, this is a two-part question and the unit is acids and bases. Ka for NH4 is 5.6 x 10^ -10 Kb for NH3 is 1.8 x 10^ -5 1. Determine the pH of a solution prepared by adding 0.0500 mole of solid ammonium chloride to 100mL of a 0.150 molar solution of ammonia. 2. If 0.0800 ...
March 27, 2007 by Kevin

Chemistry
Calculate the molality of HCl in an aqueous 12M HCl solution that has a density of 1.20g/mL
January 22, 2013 by David

chemistry
Calculate the following quantity: Volume in mL of 21.4 M cobalt(II) chloride solution that must be diluted with water to prepare 17 mL of an 51.5 M solution. Calculate to 0 decimal places and do not include units. Also, do NOT use scientific notation.
September 14, 2014 by Ocsar

AP Chemistry
Write the balanced molecular, complete ionic, and net ionic equations for the reactions that occur when the following are mixed. (Type your answer using the format [NH4]+ for NH4+ and [Ni(CN)4]2- for Ni(CN)42-. Use the lowest possible coefficients.) (a) solid silver hydroxide ...
September 24, 2011 by Rahul

Chem Webwork help
1. What is the pH when enough 0.10 M Base (in mL) is added to neutralize 8 mL of 0.10 M Acid? Complete the following table. NaOH HC2H3O2 2. What is the pH of the solution created by combining 2.60 mL of the 0.10 M NaOH(aq) with 8.00 mL of the 0.10 M HCl(aq)? with 8.00 mL of ...
July 12, 2010 by Sammy

Chemistry
The following questions refer to the following acids and bases. A) Hydrazoic acid HN3 Ka = 1.9 x 10^-5 B) Hydrofluoric acid HF Ka = 6.8 x 10 ^-4 C) Nitrous Acid HNO2 Ka = 4.5 x 10^-4 D) Phenol C6H5OH Ka = 1.3 x 10^-10 E) Aniline C6H5NH2 Ka = 4.3 x 10^-10 1) which compound is ...
April 6, 2014 by Zachary

Chemistry II
For the titration of 50.00 mL of 0.106 M NH3 with 0.225 M HCl, calculate (A) the initial pH and when the pH neutralization is (B) 25.0% complete (C) 50.0% complete (D) 100.0% complete
March 4, 2012 by Rosi

Stupid Chemistry
Ok, blonde moment here, Kb is the same as Ka but just for bases and Ka is for acids correct? right. Ka is the ionization constant for acids, Kb is the ionization constant for bases. BUT, we can change one into the other this way. KaKb = Kw. So if you are given a Ka but you ...
August 4, 2007 by Taasha

Chemistry
An aqueous solution contains 2.0 % NaCl by mass. (1) Calculate the molality (NOT molarity!) of the solution. (2) Calculate the mole fraction of the solution. I know how to solve both but the problem is missing one other compound/element. I know that molality is moles per kg of...
January 26, 2010 by .

chemistry
this is a lab i am working on and this is what is says: Solution A is mixed with water to produce solutions of varying concentration. These altered concentrations of solution A is added to a set amount of solution B and the reaction times are noted when the solutions are mixed...
January 5, 2012 by Arnold

chemistry
) Calculate the amount of unreacted aqueous ethanoic acid (CH3COOH(aq)) in the sample taken for titration with aqueous potassium hydroxide(KOH(aq)). Clearly show the steps in your calculation. (1 mark) (v) Hence calculate the amount of aqueous ethanoic acid CH3COOH(aq)) in the...
June 18, 2014 by jsame

Chemistry
Okay, so I have to find the percent of water in each solution, but it involves different reagents and I'm not sure how to figure it out. Here's one example: Add all together - 4 mL water 2 mL of 0.01 M aqueous NaOH 2 mL acetone 2 mL 0.1 M alkyl halide in acetone How do I ...
February 9, 2012 by Sam

Chemistry
A total charge of 96.5 kC is passed through an electrolytic cell. Determine the quantity of substance produced in each of the following cases. (a) the mass (in grams) of silver metal from a silver nitrate solution (b) the volume (in liters at 273 K and 1.00 atm) of chlorine ...
June 21, 2013 by Sara

Chemistry - check answers
1) Which of the following sets is arranged according to increasing base strength? A) F-, OH-, Cl- B) F-, Cl-, OH- C) OH-, F-, Cl- D) OH-, Cl-, F- E) Cl-, F-, OH- (my answer) 2) What is the pH of a solution formed by adding 4.3 x 10^-5 moles of KOH in 1 L of water? A) 4.3 x 10...
April 30, 2014 by Amanda

chemistry
Zinc combines with hydrochloric acid to form aqueous zinc chloride and hydrogen gas. If 300.0 mL of a 0.150 M solution of HCl is allowed to react with excess zinc, how many moles of hydrogen gas would be produced? Part two: if this reaction happens at STP what volume of ...
March 6, 2012 by Anonymous

Gen cmehistry
Calculate the hydroxide ion concentration in an aqueous solution that contains 3.50 x 10-3 M in hydronium ion.
April 21, 2010 by asasas

chemistry
hi, I am trying to find the solubility of Sodium Acetate by using 0.100 mol Hydroxide(base) and 0.837 mol acetic acid( vinegar). The theoretical solubility of sodium acetate is 82.3g/100ml at 25C. Doing calculations we would want NAOH concentration of 10.47mol/l to react with ...
June 3, 2008 by john

chemistry
Which of the following is a weak electrolyte in aqueous solution? a. H2SO3 b. HNO3 c. HBr d. HClO4 e. NaOH
March 23, 2010 by zacky

Chemistry - General, Hess's Law
In an experiment, 11.6g of a salt was dissolved in 100.0ml of water contained in the above calorimeter, all at an initial tmperature of 24.5 degrees Celsius. After dissolution was complete, the temperatur was 31.8C. The specific heat of the solution is 3.63J/gxC and the ...
July 24, 2009 by Sahar

  1. Pages:
  2. <<Prev
  3. 1
  4. 2
  5. 3
  6. 4
  7. 5
  8. 6
  9. 7
  10. 8
  11. 9
  12. 10
  13. 11
  14. 12
  15. 13
  16. 14
  17. 15
  18. Next>>