Saturday
August 30, 2014

Search: Calculate the molarity of a solution of sodium hydroxide, NaOH, if 23.64 mL of this solution is needed to netralize 0.5632 g of potassium hydrogen phthalate

Number of results: 40,114

chemistry
Aspirin tablet, mass of tablet= 0.4149 g concentration of iron III salicylate complex = 3.997E-4, What is the concentration of ASA in the original solution? What is the mass of ASA in the original solution? The procedure was as follows: accurately weigh by difference a tablet ...
November 20, 2012 by Emma

chemistry
Aspirin tablet, mass of tablet= 0.4149 g concentration of iron III salicylate complex = 3.997E-4, What is the concentration of ASA in the original solution? What is the mass of ASA in the original solution? The procedure was as follows: accurately weigh by difference a tablet ...
November 20, 2012 by Emma

Chemistry
If you have 200 ml of a 0.1M solution of acetic acid (pka=4.75), 1. How many ml of a solution of 1.O M NaOH would you need to adjust the pH to 5.2? "Chemistry - DrBob222, Wednesday, June 29, 2011 at 8:41pm 200 mL x 0.1M = 20 mmoles. 1. ............HAc + OH^- ==> Ac^- H2O ...
June 30, 2011 by Brayden--help Dr. Bob

chemistry
How many moles of sodium hydroxide are produced when 0.155 mole of sodium reacts with excess water?
February 24, 2012 by Cris

chemistry
the fictitious compound pandemonium carbonate has a ksg=3.091*10^-9 M 3 in water at poor temperature .calculate the solubility of PnCo3 in an aqueous solution of 1.11 M pandemonium sulfate. express your answer in units of molarity.
May 5, 2013 by himani.

Chemistry
A 0.108 M sample of a weak acid is 4.16% ionized in solution. what is the hydroxide concentration of this solution? I know that i set up an ice table. The equation would be weak acid + H20 goes to OH + the acid. What do i do with the 4.16 %? How does that fit into the problem...
April 15, 2009 by Anonymous

Chemistry
when 5.0g of KOH is added to 100mL, of water, the temperature of the solution increases by 3 degrees celsius. Assume the density of the solution to be 1g/mL and specific heat capacity of the solution to be 4.184 J/g K. a. calculate the amount of heat absorbed by the solution. ...
March 27, 2012 by danielle

Chemistry
Calculate pH of a solution by mixing 15.0 mL of .50 M NaOH and 30.0 mL of .50 benzoic acid solution (benzoic acid is monoprotic, its dissociation constant is 6.5 x 10^ -5). I am not sure whether I am supposed to do it by acid-base titration way or to use the formula -log (Ka...
July 28, 2009 by Soojung

Chem again sorry
A solution of sodium chloride in water has a vapor pressure of 18.3 torr at 25C. What is the mole fraction of NaCl in this solution? __________ What would be the vapor pressure of this solution at 45C? The vapor pressure of pure water is 23.8 torr at 25C and 71.9 torr at 45...
November 30, 2008 by Dina

chemistry
Calculate the molarity of the solution produced by mixing (a) 50.0 ml of 0.200 M NaCl and 100.0 ml of 0.100 M NaCl;
July 27, 2010 by Joseph

Chem
A household bleach solution contains 5.25% (by mass) NaClO. How many moles of NaClO are needed to make 1000L of the solution? (density = 1.07g/mL)
March 26, 2010 by Staci

Chemistry
If 18.8mL of 0.800M HCL solution are needed to neutralize 5.00mL of a household ammonia solution, what is the molar concentration of the ammonia? How do I solve this? Thank you.
September 29, 2010 by Erin

Chemistry
A student mixed 15.0 mL of a solution of 0.0200 M ferric chloride FeCl3, with 25.0 mL of water. Calculate the moles of iron ion, Fe +3 in the resulting solution. (I think this is a Dilution problem, but I wasn't really sure how to start it out. Any help would be greatly ...
January 23, 2012 by S

Chemistry
What will be the pH of an aqueous solution containing 0.040 mol/L sodium hydroxide?? I got 1.40 or 1.398 I rounded the numbers is my answer right??? If not what's the right answer?? I know I wrote the question again, because on the previous answer I did not understand what u ...
December 23, 2010 by Tarkan

chem
20 ml of 0.1 M Acetic acid and 25 ml of 0.1 M Sodium Acetate are mixed together. then 5ml of 0.1 M of NaOH is added. Find the Ph before the addition of NaOH and after the addition of NaOH??
March 15, 2011 by james bond

chemistry
20 ml of 0.1 M Acetic acid and 25 ml of 0.1 M Sodium Acetate are mixed together. then 5ml of 0.1 M of NaOH is added. Find the Ph before the addition of NaOH and after the addition of NaOH??
March 15, 2011 by james bond

Chemisty
Let's explore the efficiency of chloride ion precipitation in seperating Ag^+ from Pb^2+ in a solution. Suppose that [Pb^2+]= 0.045 mol/L and [Ag^+]= 0.084 mol/L. Calculate the chloride ion concentraion required to just start precipitation of Pb^2+ ion and then calculate the ...
March 4, 2012 by Tanner

chemistry
The mercury cell is still sometimes used in industry to prepare chlorine, Cl2, and caustic soda, NaOH. (a)In the first stage of the process a solution of sodium chloride is electrolysed using a voltage of 4.00V. Chlorine gas is obtained at one of the electrodes. The other ...
March 27, 2010 by Anonymous

Chemistry
If you are using 5.25% (mass/mass) bleach solution and you determine that the density of the bleach solution is 1.08 g/mL, how many moles of sodium hypochlorite are present in a 4.00 mL sample?
January 31, 2012 by Rob

Chemistry
If you are using 5.25% (mass/mass) bleach solution and you determine that the density of the bleach solution is 1.08 g/mL, how many moles of sodium hypochlorite are present in a 4.00 mL sample?
January 31, 2012 by Rob

Chemistry
Phenol (abbreviated HOPh) is a weak acid with a Ka= 1.29 X 10^-10. What is the pH of a mixture made by mixing 100.0 ml of a 0.700 M solution of phenol with 70.0 ml of a 1.00 M solution of NaOH? Help please and please show work... I'm so confused.
May 12, 2009 by Chelsea

science(chem)
I'm making different concentrations of ethanol and I just wanted to check my calculations and method. Making ethanol concentrations of: 0.40% 0.30% 0.20% 0.10% 0.05% To make the 0.40% ethanol from stock solution using 100ml volumetric flask: (xg ethanol)/(100ml) x 100= 0.40% ...
October 1, 2008 by ~christina~

pharmacy tech
Determine the milliliters of water needed to prepare 2 oz of a 10% solution from a 12.5% solution and distilled water.
April 4, 2011 by rob

pharmacy tech
Determine the milliliters of water needed to prepare 2 oz of a 10% solution from a 12.5% solution and distilled water.
April 4, 2011 by rob

CHemistry- For Dr.Bob
Hey Dr.Bob, I asked two days ago a question about a titration lab I had that you answered, but I still have one more question about that lab. Here's the lab summary: For my chemistry of solutions class, we had a titration lab where we titrated NaOH into an HCl + H2O mix. This ...
August 2, 2012 by Robert

Chemistry
Prepare a theoretical titration curve for titration of 25.0 mL of 0.1037 formic acid (HCOOH; pKa = 3.75) solution (diluted to 100 mL volume with deionized water) by 0.0964 M solution of KOH. I have to determine volume of KOH needed to reach equivalence point, the pH of ...
March 5, 2012 by Clint

college algebra (maths 112)
To conduct a new experiment, a scientist needs a 23% salt water solution. How much of a 13% solution must be mixed with 45 quarts of a 32% solution to get the proper solution?
February 24, 2011 by Anonymous

chem.
A 10.0 mL of vinegar, an aqueous solution of acetic acid (HC2H3O2), is titrated with .5062M NaOH, and 16.58mL is required to reach the equivalence point. A. What is the molarity of the acetic acid? B. If the density of the vinegar is 1.006 g/cm^3, what is the mass percent of ...
March 7, 2008 by Aditya

math
A pharmacist wishes to mix a solution that is 6% Minocidil. She has on hand 60 ml of a 3% solution and wishes to add some 8% solution to obtain the desired 6% solution. How much 8% solution should she add?
January 17, 2012 by Hali

chemistry
1. Heat can initiate reaction as well as be a product of chemical reactions. Cite the specific sample from the experiment that show heat acting in the manner. 2. Aluminum chloride was a product in step 6. How could you instruct your lab partner to recover it (we are ...
March 9, 2012 by Anonymous

Chemistry
An aqueous solution contains 2.6 %NaCl by mass. Calculate the molality of the solution.
August 5, 2010 by ashley

Chemistry
Calculate pH for strong base solution: 1.100 g of KOH in 550.0 mL of solution
February 27, 2012 by Matt D

Chemistry
Calculate the morality of a solution that contains a 4.0 mol of a solute dissolved in 12.0L of solution
March 4, 2013 by Francesca

Chemistry
Calculate the volume of 2.00 M solution of KOH that is required to neutralize 30.0 mL of 1.00 M solution of HNO3.
May 6, 2014 by Chemistry

Chemistry
Calculate the volume of 2.00 M solution of KOH that is required to neutralize 30.0 mL of 1.00 M solution of HNO3.
May 6, 2014 by Tina

chemistry
25ml of a solution of na2c03 having a specific gravity of 1.25g ml required 32.9ml of a solution of hcl containing 109.5g of the acid per litre for complete neutralization. Calculate the volume of 0.84N heso4 that will be compltetly neutralized by 125g of na2c03 solution The ...
February 17, 2013 by Fai

Stoichometry
Solutions of sodium carbonate and silver nitrate react to form solid silver carbonate and a solution of sodium nitrate. A solution containing 0.55 mole of sodium carbonate is mixed with one containing 0.55 mole of silver nitrate. After the reaction is complete, the solutions ...
December 19, 2012 by Nicola

Chemistry
calculate the concentration of sodium benzoate that must be present in a 2.0M solution of benzoic acid (C6H5COOH) to produce a pH of 4.00. THIS IS THE ONLY INFORMATION GIVEN. I CANNOT FIND Kb ANY WHERE IN MY TEXT NOR DOES IT GIVE US A VOLUME. CAN ANYONE HELP?
May 27, 2010 by Lucinda

Chemistry
how do you calculate the mass of sodium ions in a 500ml bag of saline solution concentration 20.0 mmol l-1. A 100ml aliquot is analysed using silver nitrate, the precipitate weighs 0.2866g
June 4, 2012 by Honey

Chem
a blue solution of copper(II) sulfate is mixed with a colerless solution of sodium phosphate and a blue percipitate is formed. Using solubility rules predict the formula of the percipitate
July 6, 2011 by Jessica

Chemestry
Approximately how many mL of 5% BaCl22H2O solution would be required to precipitate all the sulfate if we assume that your samples are pure sodium sulfate? Assume that the density of the barium chloride solution is 1.00 g/mL
April 25, 2014 by Peder

chemistry
What volume of solution would be needed to deliver the stated amount of solute? 237 milligrams of solute from a solution that is 32.0 ppm? answer in liters
April 26, 2012 by toby

chemistry check
What is the sum of the coefficients (including 1) of the following reaction? Sodium sulfate + calcium hydroxide ??? Na2SO4 + Ca (OH)2 --> 2 NaOH + CaSO4 a. 4 b. 5 c. 6 d. 7 e. 9 the sum of coefficients are = 1 + 1 + 2 +1 = 5 Goodness, you add the digits well. Good work. ...
January 30, 2007 by key

chemistry
Calculate the morality of the solution 0.450 mol of Na2S in 1.75 L of solution
November 7, 2011 by Betty

chemistry
Calculate the normality of a 15% H2SO4 (MW=98g/n) solution. The density of the solution is 1.21 g/mL
November 22, 2012 by jhanica

Chemistry
A solution is 3.00M NaCl. The solution density is 1.05 g/mL. Calculate the molality?
February 4, 2014 by Camilo

biology
if a solution has a pH of 4 mix to a solution that has a pH of 9 what will be the pH of the mixed solution? will it be acidic or base? please show me how to calculate it.please i need the answer before tomorrow morning. thank you so much. I had been to other sites but i didn't...
October 20, 2009 by heather

Chem
Consider a solution that contains both C5H5N and C5H5NHNO3. (Kb for pyridine, C5H5N, is 4.0 x 10^-4) (a) Calculate the ratio of [C5H5N]/[C5H5NH+] if the solution has a pH of 4.50. (b) Calculate the ratio of [C5H5N]/[C5H5NH+] if the solution has a pH of 5.00.
April 7, 2009 by Fred

Chemistry
1. What is the percent by mass of a solution that contains 50 grams of solute dissolved in 200 grams of solution? What is the concentration of the same solution in parts per million? 2. What is the percent mass of a solution that contains 75 grams of salt dissolved in 150 ...
March 25, 2011 by Leora

Chemistry
Calculate the concentrations of all species in a 1.41 M Na2SO3 (sodium sulfite) solution. The ionization constants for sulfurous acid are Ka1 = 1.4 102 and Ka2 = 6.3 108. Na^+ = 2.82M SO3^2- = 1.40M HSO3^- = 0.00047M H2SO3 = OH^- = H^+ = I have been able to calculate the ...
October 11, 2012 by Chris

Chemistry
Calculate the concentrations of all species in a 1.41 M Na2SO3 (sodium sulfite) solution. The ionization constants for sulfurous acid are Ka1 = 1.4 102 and Ka2 = 6.3 108. Na^+ = 2.82M SO3^2- = 1.40M HSO3^- = 0.00047M H2SO3 = OH^- = H^+ = I have been able to calculate the ...
October 11, 2012 by Chris

chemistry
calculate the pH of the solution when 25.0ml of 0.0920M HCL is titrated with 0.15ml, 23.0ml, 30.0ml of 0.10M NaOH
January 23, 2013 by nathalie

chemistry
25 mL of nitric acid of an unknown molarity are used. the end point of the titration was reached using the basic solution. what is the molarity of the nitric acid?
December 5, 2011 by

Chemistry
A volume of 29.62 0.05 mL of HNO3 solution was required for complete reaction with 0.8896 0.0008 g of Na2CO3, (FM 105.988 0.001). Find the molarity of the HNO3 and its absolute uncertainty. I have the molarity of HNO3 = 0.5667
August 29, 2012 by Amanda

chemistry
A volume of 29.62 0.05 mL of HNO3 solution was required for complete reaction with 0.8896 0.0008 g of Na2CO3, (FM 105.988 0.001). Find the molarity of the HNO3 and its absolute uncertainty. I have the molarity of HNO3 = 0.5667
August 30, 2012 by Amanda

CHEM
a 250.0ml buffer solution is 0.250M in ascetic acid and 0.250M in sodium acetate. B). What is pH after addition of 0.0050mol of HCl? C). What is pH after addition of 0.0050mol of NaOH?
March 28, 2012 by ALISON

Chemistry/maths
Using the following stock solutions: NaCl, 100mmol KCl, 200mmol CaCl2, 160mmol Glucose, 5mmol Calculate the volumes of each stock solution and the volume of water needed to prepare 100ml of a single solution containing NaCl at 5.0mmol KCl at 2.5mmol CaCl2 at 40mmol Glucose at ...
October 22, 2009 by jess

chemistry
A solution was prepared by dissolving 43.0 of in 225 of water. Calculate the mass percent of in the solution.
October 1, 2010 by help

Chemistry
Normal saline solution is 0.91%w/v. Calculate the concentration of this solution in milligrams per litre (mg/L)
December 14, 2010 by Korina

CHEMISTRY
calculate the ph of resulting solution when 2.50 ml of the 2.60 M acetic acid is diluted to make a 250.0 ml solution
February 13, 2011 by TYLER CHIRECE

CHEMISTRY
calculate the ph of resulting solution when 2.50 ml of the 2.60 M acetic acid is diluted to make a 250.0 ml solution
February 13, 2011 by TYLER CHIRECE

Chemistry help!!!
Calculate [H3o+] in each aqueous solution at 25*C, and classify each solution as acidic or basic. a. [OH-]= 1.1 x 10^-9M b. [OH-]= 2.9 x 10^-2M c. [OH-]= 6.9 x 10^-12M
March 14, 2011 by sally

chemistry
Calculate the molality of a 1.00% by weight sulfuric acid solution if the density of the solution is 1.0054 g/mL. thanks for your help!
June 3, 2012 by Anonymous

chemistry
150 mL of water is added to 50 mL of the solution produced in question 3. Calculate the new pH of the solution.
October 17, 2013 by Anonymous

chemistry
the experiment is a sequence of Chemical Reactions. Procedure part A preparation fo copper (II) Hydroxide-get a solution of copper(II)nitrate. measure 25ml of solution. to blue solution add 2mL of concertarted NaOH while stirring. Let mixture settle and use litmus paper to ...
September 15, 2010 by Missy

chemistry
26.5 moles of a .2 M aqueous solution of NaOH is required to titrate 50 ml of an aqueous solution of HNO3, what is the concentration of HNO3. I don't want the answer, I want to know how to do it.
March 14, 2011 by Daniel

chemistry
26.5 moles of a .2 M aqueous solution of NaOH is required to titrate 50 ml of an aqueous solution of HNO3, what is the concentration of HNO3. I don't want the answer, I want to know how to do it.
March 14, 2011 by Daniel

Chemistry
A 500.0-mL sodium iodide (NaI) solution was prepared by dissolving 37.7g of solid NaI in water. Chlorine gas was bubbled through a 100.0-mL sample of this solution until the reaction was complete. How many grams of molecular iodine were produced?
November 6, 2009 by L

chemistry
A flask containing 5ml of 3M hcl solution required 14.45ml of 1M NAOH for titration. How many moles of hcl are present in the solution. The density of 3M hcl is 1.05g/ml My calculation 0.005 x 3 = 0.015m 0.01445 x 1 = 0.01445m Who helps me to solve it
September 2, 2012 by Fai

Chemistry
determine the pH of a solution made by mixing 8 ml of 1.10M acetic acid and 2ml 0.9 M sodium acetate solution. pKa for acetic acid CH3COOH is 4.745. Can someone please explain
June 12, 2011 by Max

biology department
Approximately how many mL of 5% BaCl22H2O solution would be required to precipitate all the sulfate if we assume that your samples are pure sodium sulfate? Assume that the density of the barium chloride solution is 1.00 g/mL
May 15, 2013 by negin

chemistry
Hey, I am having a real hard time getting the answers to the problems. Any help would be greatly aprreciated! 1. When 11 mL of a solution containing 2.9 M AlBr3 is diluted to 33 mL, a dilute solution is formed. What is the Br- concentration in 25 mL of the dilute solution? 2. ...
November 7, 2007 by chelsea

Chemistry!
0.0100 Ba(OH)2 is dissolved in water to give 500.0 mL of solution calculate OH- concentration would it be the molarity of Ba(OH)2 (0.0100 / 0.500) multiplied by two because there is twice as much OH??
August 10, 2008 by Sue Ellen

AP Chemistry
An aqueous antifreeze is 40.0% ethylene glycol (C2H6O2) by mass. The density of the solution is 1.05 g/cm3. Calculate the molality, molarity, and mole fraction of the ethylene glycol.
November 28, 2009 by Angel

chemistry please
molarity of a solution containing 5mL of a 3.512 x 10^-5M solution (made from .128g of benzophenone and 50mL of ethanol) and then filled to the 50mL line of ethanol would this be (3.512 x 10^-5)(-.04) ?
February 1, 2009 by john

CHEM!
Okay well I suddenly got confused for a lab I did We took pH meter than we calibrate it. Then we measure the pH of the acetic acid solution, which was used to determine the Ka of the acetic acid using the first method. We made a 1M solution of NaOH which was used to titrate 50...
May 9, 2007 by Linda

Chemistry I
Acetone , C3H6), is the main ingredient of nail polish remover. A solution is made up by adding 35.0 ml of acetone (d=0.790g/ml) to 50.0ml of ethyl alchole, C2H6O (d=0.789 g/ml). summing volumes are additive, calculate (a). the mass percent of acetone in the solution. (b). the...
February 26, 2010 by Tim

science
you need to make a 3.5 Molar solution of Ca(OH)2, however, you only want to make 50ml of this Ca(OH)2 solution. How many grams of Ca(OH)2 will you need to weigh out and add to 50ml of water? Mass=VolumeinLiters*Molarity*Molmass
December 12, 2006 by brittany

math
A solution contains 100 mg/mL of a drug and the recommended dose is 50 mg/Lb once a day. How much solution would be needed for one dose to be administered to a 20 kg patient?
July 21, 2008 by LYNN

chem
A scientist wants to make a solution of potassium phosphate, K3PO4 for a lab experiment. How many grams of K3PO4 will be needed to produce 575ml of a solution that has a concentration of K+ ions of 1.4M.
May 10, 2011 by alex

math
a drug is supplied as a 20 mg/ml solution in a 50 ml vial. you need to make 15 ml of a 10 mg/ml solution. how much concentrate and how much diluent are needed to obtain the desired final volume?
July 9, 2014 by kate

Chemistry
In a saturated solution of silver phosphate, the concentration of silver ion is 4.5 x 10^-4 mol/L. The Ksp of silver phosphate would be which of the following? 6.8  10-8 1.0  10-11 1.4  10-14 none of the above 1.5  10-15 In a saturated solution ...
March 12, 2010 by Bobby

chemistry
If you have a solution that is 1.7 M sodium chloride and you have 1 L of that solution, how many moles of sodium chloride do you have?
October 28, 2011 by emily

chemistry(Please Check)
You dissolve 6.55 g of potassium nitrate in enough water to make a 250. mL solution. What is the molarity of this solution ?Answer: 0.0262 Please Check my answer
April 23, 2012 by Wurola

science
What volume of .01M KOH solution is needed to react with 20ml .01M Zn(OH)2 solution
May 19, 2011 by Anthony

Chemistry - Science (Dr. Bob222)
At 25 degree C, a student adds 0.400 g of solid phosphoric acid to a beaker containing 500.0ml of water. After the solid is completely dissolved the student adds 20.0ml of a 0.995M sodium hydroxide. What is the pOH of the solution in the beaker?
April 13, 2014 by Adrik

chemistry
A solution is labeled 0.450 m magnesim nitrate. Calculate the concentration of each ion present in solution.
February 2, 2009 by Nae

Chemistry
Calculate the pH and pOH of a solution prepared by dissolving 0.93 g of HCl in enough water to give 0.40 L of solution.
June 2, 2010 by Jakob

chemistry
need help figure out how to do these problem: 1)Calculate the pH of this solution: 1.55 X 10^-2 M HBr 2)Determine the pH of this solution: pOH = 8.3 thanks
November 30, 2010 by amy

Chemistry
Normal saline solution is 0.91%w/v Calculate thge concentration of this solution in grams per litre????
December 13, 2010 by Korina

chemistry
calculate the % (w/v) for the following solution: 28.0 g of solute is dissolved in 200.0 ml of water to give the solution with a density of 1.10 g/ml
March 6, 2011 by ned

chemistry
A pickling solution is prepared by dissolving 278 g of NaCl in 4-1 L of water. Calculate the osmolarity of the solution
March 8, 2011 by bob

chemistry
Calculate the mass of solute of hydrogen peroxide in a 35% solution if 450 ml of solution is being used
February 22, 2012 by Emmee

JHU
When excess solid Mg(OH)2 is shaken with 1.00 L of 1.2 M NH4Cl solution, the resulting saturated solution has pH = 9.30. Calculate the Ksp of Mg(OH)2
November 30, 2012 by Anzeeel

Chemistry
When excess solid Mg(OH)2 is shaken with 1.00 L of 1.2 M NH4Cl solution, the resulting saturated solution has pH = 9.30. Calculate the Ksp of Mg(OH)2
December 1, 2012 by Anzeel

Chemistry
A 7.83 g sample of NaCl is dissolved in 90.00 mL of ethyl alcohol solution. Calculate the molar concentration of the solution.
December 7, 2012 by Monica

Chemistry
Calculate the molality of 6.00 M H2SO4 solution. The density of the solution is 1.34 g/mL.
May 5, 2010 by Kari

chemistry
The density of 3M solution of NaCl is 1.25 g/mL. Calculate the molality of the solution.
May 10, 2010 by varsha

chemistry
The density of 3M solution of NaCl is 1.25 g/mL. Calculate the molality of the solution.
May 10, 2010 by varsha

chemistry
Calculate the pH of an aqueous solution of 11.5 mg of KOH dissolved in 56 mL of solution.
June 8, 2014 by susan

Pages: <<Prev | 19 | 20 | 21 | 22 | 23 | 24 | 25 | 26 | 27 | 28 | 29 | 30 | 31 | 32 | 33 | Next>>

Search
Members