Sunday
December 21, 2014

Search: Calculate the molarity of a solution made by dissolving .0715 mol Na2SO4 in enough water to form 650mL of solution

Number of results: 71,180

Chem 112
Calculate the pH of a buffer solution prepared by dissolving 0.12 mole of cyanic acid, HCNO and 0.65 mole of sodium cyanate, NaCNO in enough water to make 1.0 liter of solution. [Ka(HCNO) = 2.0 10-4] I know that this question has something to do with turning moles into ...
March 21, 2011 by Bridget

chemistry
What is the percent by mass of 3.55 g NaCl dissolved in 88 g H2O? 2. A solution is made by adding 1.23 moles of KCl to 1000.0 g of water. What is the % by mass of KCl in this solution? 3. If you have 100.0 mL of a 25% aqueous solution of ethanol, what volumes of ethanol and ...
February 10, 2011 by Anonymous

CHEMISTRY
1.) A solution is prepared by dissolving 5.00 g of stannic nitrate in enough water to make 250.0 mL of stock solution. A 15.0 mL aliquot (portion) of this stock solution is then removed and added to 75.0 mL of water. Calculate the concentrations of all ions in the final ...
October 17, 2013 by Anonymous

chemistry
A solution of iron(III) thiocyanate was produced by dissolving 7.98 milligrams solid iron(III) thiocyanate in enough water to produce a 100.00 mL solution. What is the concentration, in molarity, of the solution?
November 6, 2013 by Anonymous

chemistry
A solution is prepared by mixing 5.00 grams of compound Z (molar mass 15.00 g/mol) in 100.0 ml of water. The density of the solution is 1.09 g/ml. Calculate the molarity of the solution
January 27, 2011 by Angela

Chemistry
aqueous sulfurous acid H2SO3 was made by dissolving 0.200 L of sulfur dioxide gas at 19 C and 745 mm Hg in water to yield 500.0 ml of solution. the acid solution required 12.9 ml of sodium hydroxide solution to reach the titration end point. what was the molarity of the sodium...
February 20, 2011 by Sierra

chemistry
What is the percent by mass of 3.55 g NaCl dissolved in 88 g H2O? 2. A solution is made by adding 1.23 moles of KCl to 1000.0 g of water. What is the % by mass of KCl in this solution? 3. If you have 100.0 mL of a 25% aqueous solution of ethanol, what volumes of ethanol and ...
February 10, 2011 by Anonymous

chemistry
What is the percent by mass of 3.55 g NaCl dissolved in 88 g H2O? 2. A solution is made by adding 1.23 moles of KCl to 1000.0 g of water. What is the % by mass of KCl in this solution? 3. If you have 100.0 mL of a 25% aqueous solution of ethanol, what volumes of ethanol and ...
February 10, 2011 by Anonymous

Chemistry
Is my answer in 3 sig fig or 4 sig fig?? A solution is prepared by dissolving 12.80 g of magnesium chlorite in enough water to make 200.0 mL of stock solution. A 25.0 mL aliquot (portion) of this stock solution is then removed and added to 250.0 mL of water. Calculate the ...
October 20, 2013 by Anonymous

ap chemistry
If 4.50 g of (NH4)2SO4 is dissolved in enough water to form 250. mL of solution, what is the molarity of the solution?
September 29, 2010 by mary

Chemistry
An aqueous solution of volume 7 dm3 is obtained by dissolving 5.5 kg of C12H22O11 in enough water. express the concentration in mol/L and mol/Kg
May 10, 2012 by Susan

Chemistry
An aqueous solution of volume 7 dm3 is obtained by dissolving 5.5 kg of C12H22O11 in enough water. express the concentration in mol/L and mol/Kg
May 13, 2012 by Susan

chemistry
What is the molarity of a solution prepared by dissolving 8.5 g NaCl in enough H2O to give 600 ml of solution?
October 27, 2010 by mica

chemistry
A solution is prepared by dissolving 20.2 {\rm mL} of methanol ({\rm{CH}}_3 {\rm{OH}}) in 100.0 {\rm mL} of water at 25 ^\circ {\rm C}. The final volume of the solution is 118 {\rm mL}. The densities of methanol and water at this temperature are 0.782 {\rm g/mL} and 1.00 {\rm ...
July 14, 2012 by aa

chemistry
A 300mL solution was made by dissolving 5.0g of MgCl2 in water. What is its molarity?
October 11, 2014 by Anon

chemisty problem help
Carbon-12 contains 6 protons and 6 neutrons. The radius of the nucleus is approximately 70 pm. Calculate the volume of the nucleus and the volume of the atom. What percentage of the carbon atom's volume is occupied by the nucleus? Can someone tell me how to do this? Volume= 4/...
February 8, 2007 by Tagen

Chemistry
Aqueous sulfurous acid (H2SO3) was made by dissolving .200L of sulfur dioxide gas at 19 degrees C and 745 mmHg in water to yield 500mL of solution. the acid solution required 12mL of sodium hydroxide solution to reach the titration end point. what was the molarity of the ...
October 7, 2010 by Missy*

Chemistry
Determine the molarity (in mol/L) of NO2− ions in solution when 9.77101 g of sodium nitrite is added to enough water to prepare 3.94102 mL of the solution.
March 2, 2011 by Colin

chemistry
A solution is prepared by dissolving 0.5842g of oxalic acid (H2C2O4) in enough water to make 100.0ml of solution. A 10.00ml aliquot (portion) of this solution is then diluted to a final volume of 250.0ml. What is the final molarity of thus prepared oxalic acid solution?
November 18, 2011 by NONO

chemistry
A solution is prepared by dissolving 23.7g of CaCl2 in 375.0g of water. The density of this solution is 1.05g/mL. determine the concentration (molarity) of Cl in solution.
March 14, 2011 by jim

Chemistry
Please help me figure out where I went wrong. HNO3 + KOH -> KNO3 + H2O enthalpy change = -53.4 kJ/mol 55.0 mL of 1.30 mol/L solutions of both reactants, at 21.4C, are mixed in a calorimeter. What is the final temperature of the mixture? Assume the density of both solutions...
February 10, 2013 by A Canadian

college general chem
If 15.0 of is dissolved in enough water to form 270 of solution, what is the molarity of the solution? How many milliliters of 4.4510−2 contain 4.05 of solute
October 3, 2011 by ronie

chem
A solution is prepared by dissolving 16.5 g ammonium sulfate in enough water to make 145.0 mL of stock solution. A 10.50 mL sample of this stock solution is added to 57.70 mL of water. Calculate the concentration of ammonium ions and sulfate ions in the final solution. NH4+
November 3, 2007 by mel

chemistry
A solution is prepared by dissolving 25.0 g of ammonium sulfate in enough water to make 100.0 mL of stock solution. A 10.0 mL sample of this stock solution is added to50.0 mL of water. Calculate the concentration of ammonium ions and sulfate ions in the final solution.
March 1, 2011 by Anonymous

Chemistry
(a) Calculate the molarity of a solution that contains 0.175 mol ZnCl2 in exactly 150 mL of solution. (b) How many moles of HCl are present in 35.0 mL of a 4.50 M solution of nitric acid? (c) How many milliliters of 6.00 MNaOH solution are needed to provide 0.325 mol of NaOH?
October 31, 2011 by Anon

Chemistry II
If 15.0 mL of 1.2e-4 mol/L HI is added to 26.0 mL of 9.2e-4 mol/L HI, what is the pH of the solution? M x L = mols. Calculate mols for solution 1, do the same for solution 2, add mols together and divide by total liters. That will be the new molarity. Then pH = -log(Molarity)
April 24, 2007 by Jayd

Chemistry
What is the molality of a glucose solution prepared by dissolving 18.0g of glucose, C6H12O6 in 125g of water? A)0.000794 B)0.144 C)0.699 D)0.794 Molality is the number of moles of solute per kilogram of solvent. Because the density of water at 25C is about 1 kilogram per ...
April 27, 2007 by CIndy

Chemistry #4
What is the concentration of a solution formed by dissolving 10.0g of ammonium acetate in enough water to form 150.0mL of solution? Could someone please explain and show me how to do this? I have the answer= .865M But I am not sure exactly how?!
December 9, 2013 by Chelsea

Chemistry Check Please! ?Fixed
A solution is prepared by dissolving 3.44 g of sucrose, C12H22O11, in 118 g of water. a) What is the molality of the resulting solution? b) What is the mole fraction of water in this solution? B) moles of h2o=118g/18(g/mol)=6.548 mol moles of c12h22O11= 3.44g/342.3(g/mol)=0....
January 17, 2014 by Kate

Chemistry
What is the molarity of a solution made by dissolving 32.654 g of aluminum sulfate, Al2(SO4)3, in water and diluting with water to 125.0 mL total?
June 9, 2012 by Jamie

Chemistry
What would be the molarity of a solution made by dissolving 126g K3PO4 into 1500 mL of water?
November 8, 2014 by Teresa

Chemistry
A solution is made by dissolving 0.624 mol of nonelectrolyte solute in 795 g of benzene. Calculate the freezing point and boiling point of the solution. Tf=_C Tb=_C
April 29, 2013 by Tanner

Chemistry
A solution is made by dissolving 0.698 mol of nonelectrolyte solute in 777 g of benzene. Calculate the freezing point and boiling point of the solution
October 16, 2013 by Shardai

chemestry
what is the molarity of a solution made by dissolving 3.86 moles of NaCl in 2.50 L of solution?
November 22, 2011 by Anonymous

chemistr
10g of nacl were added to 10ml of water. he resulting solution was diluted to be a final volume of 250ml. Calculate the molarity of the solution. My calculation 10g/58g/mol = 0.173M 0.173M/025L =0.689M Given the density of the solution is 0.9864g/ml. Calculate the molality of ...
December 25, 2012 by Fai

Chemistry
A saturated solution is made by dissolving 0.325 g of a polypeptide (a substance formed by joining together in a chainlike fashion some number of amino acids) in water to give 1.37 L of solution. The solution has an osmotic pressure of 4.13 torr at 28 C. What is the ...
July 14, 2014 by Luke

Chemistry
A solution is made by dissolving 0.100 mol of NaCl in 5.35 mol of water. What is the mass % of NaCl? So far, I have determined molecular weight of NaCl (58.44 g/mol) multiplied by 0.100 mol = 5.844g NaCl, and mw of H2O (18 g/mol) = 96g H20. I thought mass solute/mass solution...
March 26, 2010 by Jon

Chemistry
a 0.250 mol sample of HX is dissolved in enough water to form 655mL of solution. If the pH of the solution is 3.44, what is the Ka of HX.
March 19, 2012 by ken

Chemistry Check Please!
A solution is prepared by dissolving 3.44 g of sucrose, C12H22O11, in 118 g of water. a) What is the molality of the resulting solution? b) What is the mole fraction of water in this solution? B) moles of h2o=118g/18(g/mol)=6.5556 mol moles of c12h22O11= 3.44g/342.3(g/mol)=0....
January 16, 2014 by Kate

Chemistry
A solution is prepared by dissolving 571.6 g of H 2SO4 in enough water to make 1000.0 mL of solution. The solution has a density of 1.3294 g/mL. (molar mass of H2SO4 = 98.08). What is the molar concentration of the solution?
March 24, 2013 by Bill

Chemistry
Calculate the pH of the following buffer solutions: a) a solution made by dissolving 2.733g KH2PO4 and 4.508g K2HPO4 in water to give 250 ml of solution. b)a solution made by mixing 35.00 ml 0.24 M C6H5NH2 with 15.00 ml 0.19 M C6H5NH3CL. The base dissociation constant Kb is 4....
February 8, 2012 by Karie

Chemistry
A solution is made by dissolving 0.526 mol of nonelectrolyte solute in 831 g of benzene. Calculate the freezing point and boiling point of the solution. Constants may be found here.
February 21, 2012 by Heather

Chemistry
A buffer solution is prepared by dissolving 0.400 mol of CH3COOH and 0.200 mol of CH3COONa in 1.00 L of water. 1.00 mL of 10.0 M HCl is added to a 100 mL portion of this solution. What is the final pH of the resulting solution? Ka of CH3COOH = 1.8 x 105
June 26, 2011 by Kendra

Chemistry
A buffer solution is prepared by dissolving 0.400 mol of CH3COOH and 0.200 mol of CH3COONa in 1.00 L of water. 1.00 mL of 10.0 M HCl is added to a 100 mL portion of this solution. What is the final pH of the resulting solution? Ka of CH3COOH = 1.8 x 105
June 26, 2011 by Sandy

please help meDr.Bob
I would appreciate very much If you guys could show me how to approach this problem. A solution is prepared by dissolving 10.8g of ammonium sulfate in enough water to make 100.0mL of stock solution. A 10.00mL sample of this stock solution is added to 50.00mL of water. ...
September 23, 2007 by claudia

Chemistry
What is the molarity of H2SO4 in a solution prepared by adding 15.0 mL of 6.0 Molarity H2S04 to enough water to make 100.0 mL of solution?
October 5, 2011 by Andrea

chemistry
you dissolve 6.55g of potassium nitrate in enough water to make a 250ml solution. if you add 1.25 l of additional water to this solution.what is the molarity of this new solution.
April 22, 2012 by cateye

chem
A solution is prepared by dissolving 25 grams of sodium sulfate in enough water to give a total volume of 500. mL. The molar mass of sodium sulfate is 142 grams per mole. What is the molarity of the solution?
November 14, 2012 by jennifer

chemistry
We add excess NaCl solution (58.44 g/mol) to 56 mL of a solution of silver nitrate (AgNO3 169.88 g/mol), to form insoluble solid AgCl. When it has been dried and weighed, the mass of AgCl (143.32 g/mol) is found to be 1.25 grams. What is the molarity of the original AgNO3 ...
September 19, 2012 by cheri

Chemistry(Please Check)
You dissolve 6.55 g of potassium nitrate in enough water to make a 250. ML solution. 1.What is the molarity of this solution?answer:0.0262 2.If you took out 15.0 mL of this solution, how many moles of potassium nitrate would you have?answer:0.393 3. What is the percent (m/v) ...
April 23, 2012 by cateye

chemistry
A solution is made by adding 5.0 g Na2CO3 * 10H2O to enough water to make a 500 mL solution. what is the molarity. I have: M=mol solute/liter solution = (5/286)/.5 = .035M 286 is what i got for the molar mass of Na2CO3 * 10H2O Is that correct?? I think it is, but the next ...
May 3, 2010 by Maggie

science
Calculate the molarity of each solution. a) 1.0 mol KCl in 750 mL of solution b) 0.50 mol MgCl2 in 1.5 L of solution
March 24, 2011 by Ali

Food Analysis
1.If 0.5l of 5M solution of CU(NO3) is diluted to a volume of 0.80l by adding water, what is the molarity of the resulting diluted solution? 2.How many ml of water will be required to dilute 11ml of 0.45Macid solution to a molarity of 0.1M? 3.Calculate the weight CuSO4.5H2O ...
March 8, 2011 by Sarah

chemistry
Calculate the molarity of a solution prepared by dissolving 25.0 g NaCl in 1.0 L solution.
April 6, 2011 by Marilyn

chemistry
If 5.20 g of HCl is added to enough distilled water to form 3.00 L of solution, what is the molarity of the solution? [Use molecular weight: HCl, 36.46 amu]
October 29, 2011 by Chemistry Chick

chemistry
We add excess NaCl solution (58.44 g/mol) to 64 mL of a solution of silver nitrate (AgNO3 169.88 g/mol), to form insoluble solid AgCl. When it has been dried and weighed, the mass of AgCl (143.32 g/mol) is found to be 1.91 grams. What is the molarity of the original AgNO3 ...
September 20, 2010 by Jake

chemistry
Calculate the molarity of a solution by dissolving 40.0 g NaOH in 1.5 L solution.
April 6, 2011 by Marilyn

Chemistry
What mass of solution containing 6.50% sodium sulfate N2SO4 by mass contains 1.50g Na2SO4 Set up a proportion. (g Na2SO4/g solution) = (1.50 g Na2SO4/x g solution). Solve for x. Check my work. how do you fine g solution
February 6, 2008 by Lauren

Chemistry
An aqueous solution with a density of 0.998 g/ml at 20 degrees Celsius is prepared by dissolving 12.8 mL of CH3CH2CH2OH (p=0.803 g/mL) in enough water to make 75.0 mL of solution calculate the percent (w/w), percent (w/v), parts per million, and molality?
October 2, 2011 by Jessica

chemistry
3. If 5.20 g of HCl is added to enough distilled water to form 3.00 L of solution, what is the molarity of the solution? [Use molecular weight: HCl, 36.46 amu] 5.20/36.46= 0.1426 X 3.00=0.428 M IS THIS CORRECT
November 8, 2014 by Anonymous

chem!
A solution was prepared by dissolving 0.163 g of sugar, (C12H22O11 MW = 3423gmol) in 100.00 mL water. What is the molarity of this solution?
April 13, 2009 by eve

Chemistry
One liter of Saline solution is prepared by dissolving 25.0 g NaCl in water. Find the molarity of this solution.
February 20, 2012 by Kristen

chemistry
what is the molarity of a solution prepared by dissolving 1.25g of hcl in water to make 30 centimeter cube of solution
June 18, 2014 by hifsa

chemistry
6.67 mL of 18.0 molar sulfuric acid solution was dissolved in enough water to make 500 mL of solution. The molarity of the diluted solution is
October 31, 2011 by Anonymous

chemistry
a solution is prepared by mixing 1.0 grams of benzen(c6h6) in 100g of water to create a solution total volume of 100ml.calculate the molarity,mass percent,mole fraction and molarity of benzene in the solution
August 26, 2014 by john

Chemistry
can anyone help me with this question A solution is made by dissolving 0.078g of Ca(OH)2 in water to make 100ml of final solution. Calculate the pH of the solution im not sure about how to use the 100ml. thanks -nad You need the 100 ml to determine concentration of OH ion. ...
June 11, 2007 by Nadine

Chemistry
Calculate the pH of a solution made by adding 2.40 g of lithium oxide to enough water to make 1.300 L of solution.
February 28, 2011 by Anonymous

CHEMISTRY
******* Please check. Also check sig figs. Ion Concentrations 1.) A solution is prepared by dissolving 5.00 g of stannic nitrate in enough water to make 250.0 mL of stock solution. A 15.0 mL aliquot (portion) of this stock solution is then removed and added to 75.0 mL of water...
October 25, 2013 by Anonymous

chemistry
The molarity of urea in a solution prepared by dissolving 16 g of urea (MW 60.0g/mol) in 39 g of H2O is ______M. The density of the solution is 1.3 g/ml.
March 9, 2010 by CC

Chemistry
Calculate molarity of HNO3 please help? Calculate molarity of HNO3 prepared by dissolving 22.3 grams of HNO3 in water to make 875 ml of solution... Please help I'm stuck
May 8, 2014 by Alex

chemistry
assume that you have a solution that is 5% (mol) acetone and 95% (mol) water. determine the molarity of this solution. how would you prepare a solution of this concentration in the lab? density of acetone=0.79 g/ml
March 2, 2010 by Jake

Chem
A solution is made by dissolving 26.9 g of NaOH in approximately 450 mL of water in a volumetric flask. The solution becomes quite warm, but after it is allowed to return to room temperature, water is added to total 500 mL of solution. Calculate the pH of the final solution. ...
February 27, 2013 by Anonymous

AP CHEMISTRY
Calculate the pH of a solution made by adding 3.50 g of lithium oxide (Li2O) to enough water to make 1.290 L of solution. (Kw = 1.0 10-14)
February 16, 2012 by Stanley3000

chem
Calculate the pH of a solution made by adding 3.20 g of lithium oxide (Li2O) to enough water to make 1.210 L of solution. (Kw = 1.0 10-14)
March 7, 2013 by sara

CHEMISTRY- molality
a sucrose solution was prepared by dissolving 13.5g sucrose in enough water to make 100ml of solution. the density is 1.050gml. calculate molality
October 9, 2010 by lucy

chemistry
The molarity of urea in a solution prepared by dissolving 16 g of urea (MW = 60.0 g/mol) in 39 g of H2O is __________ M. The density of the solution is 1.3 g/mL. i get 8.9 but the practice test says the answer its 6.3
September 26, 2010 by BenY

chemistry
An aqueous solution is made using 137g of diluted to a total solution volume of 1.30L .Calculate the molarity.molality and mass percent of solution.*assume a density of 1.08g/ml for the solution..
July 28, 2012 by noor

chemistry
calculate the molarity of each of the following solutions. Help!! (a) 0.36 mol of LiNO3 L of solution (b) 70.7 g C2H6O in 2.25 L of solution (c) 11.56 mg KI in 114.2 mL of solution
November 20, 2010 by Stacy

chemistry
a solution is prepared by dissolving 02.50 mole of Ba(OH)2 in enough water to get 4.00 L of solution. What are the OH- and H3O+ molar concentrations?
July 28, 2011 by tara

chemistry
What is the pH of a solution prepared by dissolving 12.2 g of benzoic acid in enough water to produce a 500 mL solution?
May 13, 2012 by Andrea

chemistry
A student is given 3 beakers: Beaker 1- 50.0 ml of a solution produced by dissolving 6.00 grams of a weak monoprotic acid ,HX, in enough water to produce 1 liter of solution. The empirical formula of HX is CH2O. The solution contains 3 drops of phenolphthalein. Beaker 2- A 0....
February 12, 2012 by ashley

CheMistry
A stock solution was prepared by dissolving exactly 0.4000 g of pure ASA (180.16 g/mol) in 10.00 mL of NaOH and heating the solution to a gentle boil. After cooling to room temperature, the solution was poured into a 250-mL volumetric flask and diluted to the mark with DI ...
April 18, 2010 by ChEm

Molarity
Determine the molarity and normality of a solution prepared by dissolving 55 mg of sodium bicarbonate (NaHCO3) in 750 mL of water.
January 14, 2010 by joe

chemistry
Calculate the concentration (in mg/L) of a solution formed by dissolving 5.000 g of solute in enough solvent to make 2.300 L of solution.
September 18, 2011 by alex

CHEMISTRY
Dye of iodine is prepared by dissolving in ethanol , and 1% ( one percent ) of this solution contains 10 g of solute in 1000 g of solution 1) how many grams of solvent is there in the solution ? 2) how many moles of solute ( I2) is there? 3) what is the molality of 1% of this ...
July 12, 2014 by MAD

CHEMISTRY
An ethanol-water solution is prepared by dissolving 10.00 ml ethanol C2H5OH (density=0.789g/ml) in sufficient water to produce 100.00 ml of solution with a density of 0.982g/ml. What is the concentration of ethanol in this solution? Expressed as ml. a.)%volume b.)%mass c.)%m/v...
November 13, 2013 by ADRIAN

Chemistry....
Wouldn't it be 3*0.234 instead of 2* 0.234? since....2Al3+ +3SO4 2- ----> Al2(SO4)3 4.) A solution is prepared by dissolving 25.0 g of aluminum sulfate in enough water to make 125.0 mL of stock solution. A 10.0 mL aliquot (portion) of this stock solution is then removed ...
October 25, 2013 by Anonymous

Chemistry
A 2.5% KCl solution is prepared by dissolving enough of the salt to give 181.4 g of solution. What mass (g) of water is required?
April 8, 2013 by Linzy

Chem
I'm having a lot of trouble with a simple problem. I have a 3.0% by man solution of H2O2 in H2O. The density of thr solution is 1.0 g/mL. I need to find the molarity. How do I do this? So far I have: 3.0g H2O2 x 1 mol/34.02 g= .0881 mol I'm not sure where to go or what to do ...
March 23, 2007 by Christopher

Chemistry
What is the molarity of this dichromate solution? A potassium dichromate solution of an unknown molarity was used to titrate a solution of FeSO4 prepared by dissolving a 0.350g of pure iron wire in H2SO4 and reducing the FE3+ produced to FE2+. 36.24 mL of the dichromate ...
December 2, 2012 by ANONYMOUS

Chemistry
A stock solution was prepared by dissolving exactly 0.4000 g of pure ASA (180.16g/mol) in 10.00 mL of NaOH and heating the solution to a gentle boil. After cooling to room temperature, the solution was poured into a 250 ml volumetric flask and diluted to the mark with DI water...
February 3, 2008 by Anonymous

Chemistry
Calculate the molarity of a solution prepared by dissolving 16 g of urea, NH2CONH2, in 39 g of H2O. The density of the solution is 1.3 g/mL. I've tried this question so many times but I keep getting it wrong please help me
September 29, 2013 by danielle

Chemistry
The density of an aqueous solution containing 10% of ethanol (C2H5OH) by mass is 0.984 g/ml. A) Calculate the molality of this solution. B) Calculate its molarity. C) What volume of the solution would contain 0.125 mol of ethanol.
March 17, 2010 by Hilavidpreet

chemistry
What is molarity of solution made by combining 10.0g of NaOH with enough water to reach a total volume of 2.00L?
November 21, 2011 by Sarah

chemistry
A 2.5 g sample of NaOH (Mw = 40.00) was dissolved in water to give a solution of final volume 250 cm3. (i) With reasons, state whether NaOH is a strong or a weak base. Give the conjugate acid of NaOH and decide whether this conjugate acid is acid, alkaline or neutral. (ii) ...
April 21, 2013 by LUx

Chemistry
An aqueous KNO3 solution is made using 73.4g of KNO3 diluted to a total solution volume of 1.86 L. Calculate the molarity of the solution. (Assume a density of 1.05 g/ml for the solution.)
January 29, 2013 by Anna

chemistry
What is the molarity of the following solutions? (a) 2.1 mol KCl in 1.7 L of solution 1 M (b) 1.04 mol H2SO4 in 335 mL of solution 2 M (c) 0.944 mol of ammonia in 215 mL of solution 3 M
February 24, 2011 by Bobby

Chemistry
What is the molality of a solution formed by dissolving 1.95 mol of KCl in 17.0 mol of water (MM of water = 18.02 g/mol), answer in 3 sigfigs?
November 26, 2012 by Jake

Chemistry
A solution is prepared by dissolving 10.0 moles of Na2SO4 solid in 0.500 kg H2O. what is the vapor pressure of the solution at 30 C?
September 5, 2009 by Tammy

chemistry
A stock solution was prepared by dissolving exactly 0.4000 g of pure ASA (180.16 g/mol) in 10.00 mL of NaOH and heating the solution to a gentle boil. After cooling to room temperature, the solution was poured into a 250-mL volumetric flask and diluted to the mark with DI ...
January 28, 2010 by Tasha

Pages: <<Prev | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | Next>>

Search
Members