Wednesday
July 23, 2014

Search: CHEMISTRY- boiling point

Number of results: 60,055

chemistry
Which of the following statements about boiling points are true? A. The boiling point of 0.1 m NaF(aq) is lower than the boiling point of 0.1 m methanol(aq). B. The boiling point of a 0.5 m aqueous solution of LiOH is the same as the boiling point of a 0.5 m aqueous solution ...
April 18, 2013 by Anonymous

college chemistry
Comparing the boiling points of: A) C3H8 B) C5H12 C) C2H5OH and identify the folowing statements as either True or False: Dispersion forces only for (A) Boiling point (C) > Boiling point (A) (B) exhibits hydrogen bonding Boiling point (C) < Boiling point (A) (A) exhibits...
November 11, 2010 by Stefanie

Chemistry
Which of the following statements about boiling points are false: A. the boiling point of 0.1 m KF(aq) is lower than the boiling point of 0.1 m ethanol(aq) B. the boiling point of a 0.5 m aqueous solution of NaOH is the same as the boiling point of a 0.5 m aqueous solution of ...
September 8, 2010 by Timothy

Chemistry
What effect does lowering the pressure on the surface of water have on the boiling point? It increases the boiling point It decreases the boiling point the boiling point remains the same
April 28, 2010 by Megan

Chemistry
calculate the freezing and boiling points of each of the following solutions. (a) 0.37 m glucose in ethanol freezing point ______I got -1.2e2 but its wrong_______°C boiling point _________I got 1.1e2 but its wrong:(____°C (b) 15.0 g of decane, C10H22, in 37.9 g CHCl3 freezing ...
March 24, 2011 by Rebekah

Chemistry II
Eugenol, the active ingredient in cloves, has a formula of C10H12O2. What is the boiling point of a solution containing 1.14g of eugenol dissolved in 10.0g of benzene? The boiling point of benzene is 80.1C and the boiling point elevation constant for benzene is 2.53C/m. I got ...
September 27, 2009 by Mandy

chemistry
If im trying to separate alcohol from water by distillation, is it possible if I heat the mixture to 100degreeC so water reaches its boiling point? I mean, is this method only workable if I distill the alcohol which has a lower boiling point first? What happens to alcohol ...
April 22, 2012 by Hae

Chemistry problem
What is the expected freezing point of a 3.50 m aqueous solution of BaCl2 (Kfp=1.86C/m)? What is the boiling point (Kbp=0.512C/m? & which is affected to the greater extent, the boiling point or the freezing point?
November 12, 2009 by Dan

chemistry
A 2.97 g sample of a molecular compound is dissolved in 103 g of tetrachloromethane (carbon tetrachloride). The normal boiling point of the solution is 61.51C, the normal boiling point of CCl4 is 61.2C. The boiling point constant for CCl4 is 4.95 K · kg/mol. What is the ...
December 6, 2011 by Aubrey

chemistry
The alkanes are a homologous series of compounds containing only carbon and hydrogen that have the general formula . Members of this series include butane (), 2,2-dimethylpentane (), hexane (), and heptane (). The boiling points of some members of this homologous series are ...
January 24, 2009 by isthiscorrect

Chemistry
Calculate the boiling points of freezing points of the following solutions in water. a) boiling point of a 2.25m solution of propylene glycol (a non-electrolyte) b)freezing point of a 1.0m solution of potassium iodide c)freezing point of a 1.0m solution of nickel(II) nitrate d...
May 2, 2010 by Ralph

chemistry(Please check)
1) In comparing the phase diagram for water with that of a solution of sugar in water, all of the following decrease except a) the vapor pressure b) the boiling point c) the freezing point d) the triple point I chose the boiling point as the answer. Is this correct? Thank you.
February 10, 2012 by Hannah

heat
At what point will liquid alcohol change to vapor? Boiling Melting Fusing Freezing The boiling point is the point above which the liquid state does not exist. Evaporation can occur from the liquid state at lower temperatures as well, but there will be no "boiling" (rapid ...
August 3, 2005 by alf

chemistry
Why is HF has lower boiling point than CsI, even though HF has hydrogen bond. Does HF have higher boiling point than O2
March 13, 2010 by eng

chemistry
O2, Oxygen, has a boiling point of 90K (-183°C), and nitrogen, N2, has a boiling point of 77K (-196° C). Which is a liquid and which is a gas at 80 K (-193°C)?
July 30, 2013 by Anonymous

chemistry (college final)
How to determine which of the compounds will have the lowest boiling point vs the highest boiling point?
May 1, 2011 by Sarah (C)

Chemistry
Diethyl ether has a boiling point of 34.5C, and 1-butanol has a boiling point of 117C. Both of these compounds have the same numbers and types of atoms. Explain the difference in their boiling points. The answer I found was that: only 1-butanol can form hydrogen bonds. But I ...
December 6, 2010 by Sara

Chemistry
The normal boiling point of benzene is 80 degree C and its heat of vaporizations is 30.8 kj/mol. What is its boiling point at the top of Pikes Peak where P=260 mmHg?
April 27, 2011 by Tyler

Chemistry
A 1.90-g sample of a large biomolecule was dissolved in 25.0 g of carbon tetrachloride. The boiling point of this solution was determined to be 77.85°C. Calculate the molar mass of the biomolecule. For carbon tetrachloride, the boiling point constant is 5.03°C · kg/mol, and ...
July 15, 2012 by Tasha

ORGANIC CHEMISTRY 2
Ethanol has boiling of 78.5 while dimethyl ether has boiling point of -24.9;so account for this diffrence in boiling points since they both have the same molecular weight.how can this be explained using diagrams?
July 27, 2011 by ASTHON LEBUHANG

Boiling point
You add 2g of sugar into 23mL of water. Estimate the boiling point. I would say its above 100 since waters boiling point is 100. So maybe 120?
April 29, 2009 by Chopsticks

chemistry
how much energy in calories, will be required to evaporate 125.0ml of ethanol at its boiling point? Density=0.818g/ml boiling point=78.5C heat of vaporization=210 cal/g
January 27, 2010 by Ashley

chemistry
How do the boiling points of 3.0 m C6H12O6 and 3.0 m CaCl2 compare? A. The boiling point of 3.0 m C6H12O6 is higher. B. The boiling point of 3.0 m CaCl2 is higher. C. They are the same. D. The difference cannot be determined from the information given. I think the answer is D...
September 15, 2011 by jasmine

Chemistry
Arrange the following aqueous solutions in order of increasing boiling point, explain your answer: 0.120 m glucose (C6H12O6), 0.05 m LiBr, 0.05 m Zn(NO3)2. Using data the boiling point constants given in the test book, calculate the boiling points of each of the above aqueous ...
February 15, 2013 by m

Chemistry
How much energy (in kilojoules) is required to convert 280mL of diethyl ether at its boiling point from liquid to vapor if its density is 0.7138 g/mL? Its heat of vaporization is +26.5 kJ/mol at its boiling point.
February 16, 2010 by Julie

Chemistry
How much energy, in calories, will be required to evaporate 125.0 mL of ethanol at its boiling point? Given: Density 0.818 g/mL Boiling Point 78.5 C Heat of Vaporization 210 cal/g Any help is appreciated!
January 19, 2011 by Brooke

intro to chem
disolving sucrose, NaCl< and calcium chloried affect the boiling point of frezing point of water. Assuming that you have 0.1m solution of all these 3 compounds: a)rank then in order of decreasing freezing point. b) rank in order of increasing boiling point c)why do the ...
October 27, 2010 by julia

chemistry
Which of the following properties increase with increasing atomic number for fluorine and chlorine? I. melting point of the elements (yes) II. boiling point of the hydrogen halides i'm not sure about II because HF has the highest boiling point but fluorine and chloride fit in ...
December 31, 2010 by d

chemistry
Which of the following properties increase with increasing atomic number for fluorine and chlorine? I. melting point of the elements (yes) II. boiling point of the hydrogen halides i'm not sure about II because HF has the highest boiling point but fluorine and chloride fit in ...
December 31, 2010 by d

Chemistry
DrBob222, I don't know how to solve this problem either. And yes, this is the question for this problem. I even double check it. Please help. Chloroform (CHCL3) has a normal boiling point of 61 'C and an enthalpy of vaporization of 29.24 kJ/mol. What is the value of delta Gvap...
April 30, 2013 by Chloe

Chemistry
Cocaine is a non-electrolyte that has a molecular weight of 303.4 g/mole. How many grams must be dissolved in 25.0 mL of Chloroform (density = 1.484 g/mL) to raise its boiling point to 65.5 Celsius? The boiling point of pure Chloroform is 61.2 Celsius. Kb Chloroform = 3.62 ...
February 26, 2012 by Alyssa

Chemistry
A solvent has a molar mass of 37.2 g/mol and a normal boiling point of 111.2 oC. The boiling point elevation constant, K b , for this solvent is 1.58 oC/m. If 18.7 g of a nonelectrolyte having a molar mass of 20.5 g/mol are mixed with 170.0 g of the solvent, what is the ...
February 14, 2013 by John

Chemistry
Arrange the compounds in order of increasing boiling point. A) CH4 B)CH3CH3 C) CH3CH2Cl D) CH3CH2OH **I know High Intermolecular force = High boiling point!** My question is if A, B & C are dipole-dipole, and D is hydrogen bonding.. how can i determine from A, B & C which is ...
July 2, 2011 by Tc

Chemistry
The molal boiling-point constant for water is 0.51 degrees C/molal. The boiling point of a 1.00 molal solution of Ca(NO3)2 should be increased by: A.) exactly 1.53 or B.) Somewhat less than 1.53 This is how I worked the problem: Ca(NO3)2 dislocates into 3 mole particles. ...
February 21, 2013 by Marcus

Chemistry
How does dissolving a solute affect the boiling point or freezing point of the solution? What about the solution's vapor pressure? Read about Raoult's Law, freezing point depression and boiling point elevation.
March 6, 2007 by John

Chemistry
Oxygen has a boiling point of 90K, and nitrogen has boiling point of 77K. Which is a liquid and which is a gas at 80K? I tried to look into the phase diagrams, but I still don't understand. Can somebody please help and explain to me??? THANKS A LOT!!!
July 10, 2011 by Cynthia

chemistry grade 11
A molecule of CHCl3 (chloroform), has the same shape as a molecule of carbon tetrahydride, CH4. But carbon tetrahydride’s boiling point is -164º C and chloroform’s boiling point is 62 ºC. Explain the difference between the boiling points of the two substances. please help !! ...
September 21, 2012 by leah

chemistry
A molecule of CHCl3 (chloroform), has the same shape as a molecule of carbon tetrahydride, CH4. But carbon tetrahydride’s boiling point is -164º C and chloroform’s boiling point is 62 ºC. Explain the difference between the boiling points of the two substances. can u give a ...
September 21, 2012 by Anonymous

Chemistry II
Eugenol, the active ingredient in cloves, has a formula of C10H12O2. What is the boiling point of a solution containing 1.14g of eugenol dissolved in 10.0g of benzene? The boiling point of benzene is 80.1C and the boiling point elevation constant for benzene is 2.53C/m. I got...
September 28, 2009 by Mandy

chemistry
If a solution has a lot of particles, is it going to have a low or high boiling point? For instance, would NaCl have a higher or lower boiling point than C12H22O11, based on the amount of particles it has (NaCl has more than C12H22O11)? Are you thinking of solutions with ...
April 19, 2007 by Grace

chemistry
Compute the boiling point elevation of a salt water solution that contains 2.60 g of NaCl dissolved in 121 ml of water. Enter the number of degrees celsius that the boiling point will be elevated.
December 10, 2010 by chaddhar

Chemistry
In a mountainous location, the boiling point of pure water is found to be 95°C. How many grams of sodium chloride must be added to 9 kg of water to bring the boiling point back to 101°C? Assume that i = 2.
January 27, 2013 by flame

chemistry
A 2.00 g sample of a particular compound was dissolved in 15.0 g of carbon tetrachloride. The boiling point of this solution was determined to be 77.85ºC. For pure CCl4, TB = 76.50ºC and KB = 5.03°C·kg/mol Calculate the boiling point elevation, ΔTB, for this solution.
May 4, 2014 by sarah

ap chemistry
A 4.47 g sample of a molecular compound is dissolved in 96 g of tetrachloromethane. The normal boiling point of the solution is 61.51 degrees celcius, the normal boiling point for CCl4 is 61.2 degrees celsius. The boiling point constant for CCl4 is 4.95K*kg/mol. What is the ...
October 30, 2012 by emily

chemistry
What is the expected freezing point of a 3.50 m (m standing for molality)aqueous solution of BaCl2(Kfp= 1.86 degrees Celsius/m)? What is the expected boiling point(Kbp= 0.512 degrees Celsius/m)? which is effected to the greater extent, the boiling point or freezing point? ...
April 7, 2013 by Patricia

Chemistry
Can someone pls help me!! You decide to establish a new temperature scale on which the melting point of ammonia (-77.75 C ) is 0 A, and the boiling point of ammonia (-33.35 C ) is 200 A. What would be the boiling point of water in A ? What would be the temperature of absolute ...
February 2, 2013 by Greg

A.P. CHEMISTRY
How many grams of methanol are needed to raise the boiling point of 250 mL of water by 2.7C. The boiling point elevation constant for water = 0.512 C/m. Assume water to have a density of 1g/mL)
March 4, 2010 by mary

Chemistry
Could you help me with this question: A molecule of chloroform, CHCl3, has the same shape as a molecule of methane CH4. However, methane's boiling point is -164 degrees celcius ans chloroform's boiling point is 62 degrees celcius. Explain the difference between the two boiling...
March 2, 2009 by Sabrina

Chemistry hw
Assuming 100% dissociation, calculate the freezing point and boiling point of 3.13 m SnCl4(aq). Tf=? Tb=? My work: SnCl4 with 100% dissociation gives a van't hoff factor of 5, 1Sn 4+ ion and 4 Cl- ions deltaT = i x Kf x m for freezing point = 5 x 0.51C/m x 3.13m = deltaTf ...
February 19, 2012 by Akle

chemistry
The boiling point of water at 735mmHg is 99.073C. What mass of NaCl should be added to 3.11kg water to increase the boiling point to 100.000C. Kb for water = 0.510K kg mol-1.
October 11, 2010 by Gina

Chemistry
Some physical properties of water are shown below. freezing point 0.00°C boiling point 100.00°C Kf 1.86°C/m Kb 0.512°C/m A 16.0 g sample of a compound known to contain 3 ion species is dissolved in 100. g of water. The boiling point of the solution is 103.6°C. What is the ...
September 9, 2010 by Tiffany

Chemistry
You decide to establish a new temperature scale on which the melting point of ammonia (-77.75 C ) is 0 A, and the boiling point of ammonia (-33.35 C ) is 200 A. What would be the boiling point of water in A ? What would be the temperature of absolute zero in A ?
February 2, 2013 by Greg

chemistry
The boiling point of water at 735 mmHg is 99.07C. What percent by mass of NaCl should be present in a water soln to raise the boiling point to 100.0C? [Kb for water is 0.512 C kg solvent (mol solute )-1]
August 30, 2011 by Holly

chemistry
You remember Dr. Laude saying something about how adding salt to water increases the boiling point. If you have 1 cup (8 fl. oz. = 250 mL = 250 g) of H2O, how much NaCl should you add in order to raise the boiling point to 105C?
February 9, 2011 by jalyn

some science
a filter tip or a cigarette acts as both a filter and a condenser. which of the following cannot be removed, assuming the filter tip is 100% efficient? a. carbon monoxide, boiling point -191 degrees. b. nicotine, boiling point 247 degrees. c. tar, boiling point 350 to 400 ...
December 22, 2006 by holly

AP Chem. 3
A 1.80 g sample of a large boimolecule was dissolved in 21.0 g of carbon tetrachloride. The boiling point of this solution was determined to be 77.85°C. Calculate the molar mass of the biomolecule. For carbon tetrachloride, the boiling point constant is 5.03°C·kg/mol, and the ...
January 30, 2012 by Kathryn

chemistry
I'm starting to learn about colligative properties and i want to know if there are different equations for boiling point elevation and freezing point depression? In the book they give me the equation: (delta)Tb= Kb times molality. But my teacher gave us: delta Tb = Kb times # ...
June 1, 2010 by jenny

chem class
which of the following has the highest boiling point? a)C2Cl6 b)C2Br6 c)C2H6 d)C2F6 e)C2I6 i know its e, but why is that the answer? are all questions about boiling points similar? or they they have to do with intermolecular forces? i have a test soon on boiling point problems...
September 16, 2010 by RiChy

Chemistry
A solution is made by dissolving 3.5 moles of sodium chloride (NaCl) in 155 grams of water. If the molal boiling point constant for water (Kb) is 0.51 °C/m, what would be the boiling point of this solution?
January 14, 2011 by Christi

Chemistry
What mass of sucrose, C12H22O11, should be added to 75.0 g H2O to raise the boiling point to 100.35 degrees C? Molal boiling point of water: 0.512 Kb, degrees C m^-1 Answer: 18 g sucrose
February 25, 2013 by JJ

Chemistry
In a mountainous location, the boiling point of pure water is found to be 95°C. How many grams of sodium chloride must be added to 9 kg of water to bring the boiling point back to 99°C? Assume that i = 2. So what will my answer be in grams?
March 29, 2011 by Irma

CHEMISTRY- boiling point
0.1m aqueous solution of HCl and 0.1m aqueous solution of C6H12O6. calculate the boiling point of each i know the eq. dTb=Kbm but i have no temperatures. this is the question
October 15, 2010 by lulu78

chemistry
hen 9.3 g of an unknown non-electrolyte is dissolved in 50.0 g of benzene, the boiling point the boiling point increased to 81.19 degrees C from 80.1 degrees C. If the Kbp of the solvent is 2.53 K/m, calculate the molar mass of the unknown solute. The answer is 432. I dont ...
February 5, 2011 by zainab

Chemistry
The heat of vaporization of benzene, C6H6, is 30.8kJ/mol at its boiling point of 80.1 degrees celsius. How much energy in the form of heat is required to vaporize 102g of benzene at its boiling point? I know that the answer is 24.2kJ but i am not sure how to get this.
February 5, 2012 by Hannah

Chemistry
Dr Bob Can you please confirm for me that only NH3 has a boiling point that does not fit the general trend from these choices NH3 PH3 SbH3 AsH3 many thanks andy I am picking NH3 because of the reason that the larger the compound the greater the boiling point Am I right with my...
May 11, 2010 by Andy

Chemistry
The normal boiling point for acetone is 56.5°C. At an elevation of 5300 ft the atmospheric pressure is 630. torr. What would be the boiling point of acetone (ÄHvap = 32.0 kJ/mol) at this elevation? I need to know how to do this!! what formula do u use for this? is it the ...
November 28, 2008 by Viola

chemistry
Would you expect the boiling point of a solution to change if you added a non-volatile solute such as potassium chloride? How? Would an insoluble substance such as sand affect the boiling point? EXPLAIN PLEASEE :] thanks so much!!
November 7, 2010 by 123

chemistry
How much heat is required to vaporize 3.50L of at its normal boiling point? The following data are given for Carbon Tetrachloride. Normal melting point, -23 Degrees Celsius, normal boiling point, 77 Degrees Celsius; density of liquid, 1.59g/mL; Delta H (FUSION): 3.28 kJ mol^-1...
December 8, 2008 by Linda

chemistry
How much heat is required to vaporize 3.50L of at its normal boiling point? The following data are given for Carbon Tetrachloride. Normal melting point, -23 Degrees Celsius, normal boiling point, 77 Degrees Celsius; density of liquid, 1.59g/mL; Delta H (FUSION): 3.28 kJ mol^-1...
December 8, 2008 by Linda

Organic chemistry plz help me out (thanks)
1) a) What is the normail boiling point (760 mm Hg) for a compound that boils at 150 degree celsius at 10 mm Hg pressure? b) At which temperature would the compund in (a) boil if the pressure were 40 mm Hg? c) A compound was distilled at atmospheric pressure and had a boiling ...
September 26, 2013 by Laila

chem
three students each measured the boiling point of water at each destination person 1 had boing point of 93.9 c 2nd person found boiling point of 101.1 c 3rd person found boing point of 100.0 c. which student went water skiing in honolulu? which student went to ely, nevada? ...
July 16, 2012 by tina

AP Chem
A 1.73 g sample of a molecular compound is dissolved in 105 g of tetrachloromethane (carbon tetrachloride). The normal boiling point of the solution is 61.51C, the normal boiling point of CCl4 is 61.2C. The boiling point constant for CCl4 is 4.95 K · kg/mol. What is the ...
December 12, 2012 by John Smith

Chemistry
Pure water boils at 100ºC (212ºF). When a substance is added to the water the boiling point increases due to what is referred to as the boiling point elevation. (a) What is the molecular mass of sucrose (C₁₂H₂₂O₁₁)? (b) If you add 100 g of ...
March 18, 2012 by Hannah

Chemistry Science
A 15.0 g sample of an unknown compound is dissolved in 100.0 g of benzene. The boiling point is raised 2.67 oC above the boiling point of pure benzene. What is the molar mass of the sample? Kb for benzene is 2.67oC/m.
May 29, 2012 by science girl

Chemistry(Please check)
1) Where in the phase diagram of a compound do all phases exist together? a) at the sublimation point b) at the boiling point c) at the melting point d) at the critical point e) at the triple point I chose answer E, the triple point. Is this correct?
January 28, 2012 by Hannah

Chemistry
The following information is given for ethanol, C2H5OH, at 1atm: boiling point = 78.4oC Hvap(78.4oC) = 38.6 kJ/mol melting point = -115oC Hfus(-115oC) = 5.02 kJ/mol specific heat liquid = 2.46 J/goC At a pressure of 1 atm, what is H in kJ for the process of condensing a 40.8 g...
January 24, 2011 by Jordan

chemistry
is the following false the boiling point of a 0.5 aqueous solution of koh is higher than the boiling point of a 0.5m aqueous solution of kcl?
December 2, 2010 by micki

Chemistry
The following information is given for ether, C2H5OC2H5, at 1atm: boiling point = 34.6oC Hvap(34.6oC) = 26.5 kJ/mol melting point = -116oC Hfus(-116oC) = 7.27 kJ/mol specific heat liquid = 2.32 J/goC At a pressure of 1 atm, what is H in kJ for the process of condensing a 33.7 ...
February 9, 2012 by Hannah

Chemistry
The enthalpy of vaporization of chloroform (CHCl3) is 29.2 kJ mol-1 at its normal boiling point 61.2 Celsius. what is the standard change in entropy for vaporization of chloroform at its normal boiling point? Answer I got was 29.2/334.2 = 0.0873. (CORRECT?)
April 2, 2013 by Viv

Chemistry
A student dissolves 2.57 grams of iodine [molar mass= 257]in 10.0 grams of carbon tetrachloride [kb = 5.03C/m]. The normal boiling point of carbon tetrachloride is approximately 77degreesC. What is the approximate boiling point of the solution above?
January 9, 2011 by Gina

chemistry
To form a gas, the molecules of a liquid must overcome the intermolecular forces of attraction that bind them in the liquid state. As these forces of attraction become stronger, what happens to the boiling point? the boiling point:increases, decreases, or remains constant
September 5, 2012 by daniela

Chemistry
An Ap student got a lab report back with "-4.5 % error" written in red on it. He had found the boiling point of an unknown liquid to be 45 C. What is the correct boiling point of his unknown liquid? I know first I would write -4.5 % error = |4.5-x|/x x 100 but I don't know ...
September 12, 2013 by Anonymous

chemistry
Cocaine is a non-electrolyte that has a molecular weight of 303.4 g/mole. How many grams must be dissolved in 25.0 mL of Chloroform (density = 1.484 g/mL) to raise its boiling point to 65.5 Celsius? The boiling point of pure Chloroform is 61.2 Celsius. Kb Chloroform = 3.62 ...
February 24, 2012 by anna

Chemistry please help
An Ap student got a lab report back with "-4.5 % error" written in red on it. He had found the boiling point of an unknown liquid to be 45 C. What is the correct boiling point of his unknown liquid? I know first I would write -4.5 % error = |4.5-x|/x x 100 but I don't know ...
September 12, 2013 by Taylor

Chemistry
Question: if you added ethylene glycol to your car's radiator to lower the freezing point to -31.0 degree C, what would the corresponding boiling point of the coolant in your radiator. The freezing point and boiling point constants for water are 1.86 and .510 degree C/m The ...
March 16, 2009 by eliz

B.P.
Why does the boiling point of a two-component mixture rise slowly throughout a simple distillation when the boiling point differences are not that large? Thanks from Sheryl
November 5, 2006 by Sheryl

Chemistry
Consider a 9% by mass aqueous ethyl alcohol solution. a.) Calculate the molality of this solution_____m b.) Given that ethyl alcohol is a molecular solute, calculate the freezing point of this solution. ________ degrees Celsius. c.) Consider the boiling point of each solution...
June 24, 2014 by amber

Chemistry
Hard ball candy is prepared from boiling an aqueous sugar solution that has a boiling point of 260.°F. What is the molality of this solution?
September 11, 2013 by Jade

Chemistry
density- 0.818g/mL boiling point- 78.5 degrees C heat of vaporization- 210cal/g a)How much energy, in calories, will be required to evaporate 125.0 mL of ethanol at its boiling point? b)How long will it take to add this energy, if the rate of heating is 1.24kcal/minute? Please...
September 1, 2009 by Dana

chemistry
the boiling point of water at 735mmHg is 99.073 degrees celcius. What mass of NaCl should be added to 3.11kg water to increase the boiling point to 100.000 degrees celcius? Kb for water = 0.510 K Kg mol-1
October 6, 2010 by Kell

Chemistry
1. What happens to the pressure and boiling point when there is an increase in altitude? 2. What happens to the altitude and pressure when the boiling point is lowered? 3. What happens to the altitude and boiling point when the pressure is increased?
April 25, 2008 by Chrisy

Chemistry
A metal, , of atomic weight 96 reacts with fluorine to form a salt that can be represented as . In order to determine and therefore the formula of the salt, a boiling point elevation experiment is performed. A 9.18- sample of the salt is dissolved in 100.0 of water and the ...
February 20, 2011 by Robin

Chemistry
A metal, , of atomic weight 96 reacts with fluorine to form a salt that can be represented as . In order to determine and therefore the formula of the salt, a boiling point elevation experiment is performed. A 9.18- sample of the salt is dissolved in 100.0 of water and the ...
February 20, 2011 by Robin

Chemistry
The boiling point of another member of this homologous series was found to be 309 K. What is the likely molecular formula for this compound? How many carbon atoms would you expect this new compound to have if its boiling point is between that of a four-carbon alkane and that ...
March 14, 2011 by Alison

Chemistry
How much heat is required to vaporize 1.00 L of CCl4 at its normal boiling point? The following data are given for CCl4. Normal melting point, -23 degree celcius , normal boiling point, 77 degree celcius density of liquid 1.59 g/mL; ; enthalpy of fusion 3.28 kJ/mol vapor ...
December 8, 2008 by Ashleigh

chemistry
Given the compounds H2S, NH3, and SO2. Determine the order o boiling points. Rank them from highest to lowest boiling point. Give an explanation for your ranking by the electronegativity data a by type of intermolecular force.
December 5, 2010 by regina

chemistry
Crude oil pumped out of the ground may be accompanied by the formation of water, a solution that contains high concentrations of NaCl and other salts. If a boiling point of a sample of the formation of water is 2.0 Celsius above the boiling point of pure water, what is the ...
August 10, 2013 by ivy

Chm 2046
The normal boiling point of liquid ethanol is 351 K. Assuming that its molar heat of vaporization is constant at 37.5 kJ/mol, the boiling point of C2H5OH when the external pressure is 1.35 atm is K.
February 1, 2013 by Camaro Lover

Chemistry
If 395 grams of water at 21 Celsius absorbs 285kJ of heat from a mountain climbers stove at an elevation where the boiling point of water is 87 Celsius, is this amount of energy sufficient to heat the water to its boiling point? How many kJ are required to boil the water?
November 6, 2011 by Kay

chemistry
Thanks much! Are melting point and boiling point examples of macroscopic properties? What exactly are macroscopic properties? Yes, mp and bp are macroscopic. One can see melting and boiling. macroscopic: large enough to be visible to the naked eye
February 28, 2007 by Miranda

Pages: 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | Next>>

Search
Members