Monday
May 25, 2015

Search: An unknown amount of water is mixed with 350 mL of a 6 M solution of NaOH solution. A 75 mL sample of the resulting solution is titrated to neutrality with 52.5 mL of 6 M HCl. Calculate the concentration of the diluted NaOH solution

Number of results: 58,119

Chemistry
When 5.4 g of NaCl and 3.6 g of AgNO3 are dissolved in water and mixed, what ions remain in the solution and how many moles of each will be there?
October 23, 2014 by Valeria

Chemistry
You have 150 ml of a solution of benzoic acid in water estimated to contain about 5 g of acid. The distribution coefficient of benzoic acid in benzene and water is approx 10. Calculate the amount of acid that would be left in the water solution after three 50 ml extractions ...
November 22, 2010 by Nat

Chemistry
You have 150 ml of a solution of benzoic acid in water estimated to contain about 5 g of acid. The distribution coefficient of benzoic acid in benzene and water is approx 10. Calculate the amount of acid that would be left in the water solution after three 50 ml extractions ...
November 22, 2010 by Nat

Algebra 1
Solve each system graphically. Be sure to check your solution. If a system has an infinite number of solutions, use set-builder notation to write the solution set.If a system has no solution, state this. I tried this and found no solution, is this right? x + y = 9 x - y = 1
January 8, 2015 by slomo

Chemistry
an unknown salt is either NaCN,NaC2H3O2, NaF, NaCl, or NaOCl. when 0.100 molar of the salt is dissolved in 1.00 L of solution, the ph of the solution is 8.07. what is the identity of the salt? where do I start? How do I solve it, cuz im not gettign right answer.
March 17, 2015 by DF

Chemistry
How many mL of the 0.1029 M standard NaOH solution is required to titrate 0.2247 g sample of KHP to the phenolphthalein end point?
October 9, 2012 by Erin

college chemistry
If KHP sample #1 requires 27.30 mL of NaOH solution to reach an endpoint, what volume should be required for samples #2 and #3?
October 25, 2012 by Kristen

Chemistry
A 2.00 ml sample of an aqueous solution of hydrogen peroxide, H2O2 (aq) is treated with an excess of Kl (aq). The liberated I2 requires 12.40 mL of 0.1025 M Na2S2O3, for its titration. Is the H2O2 up to the full strength (3% H2O2 by mass) as an antiseptic solution? Assume the ...
October 12, 2008 by Saira

math
two systems of equations are giving below for each system choosethe best description of its solution if applicable give solution x+4y=8 -x-4y= -8 choose which one this problem fit in 1)the system has no solution 2) the system has a unique solution (x,y)= or the system has a ...
March 7, 2013 by sw

chemistry
As a technician in a large pharmaceutical research firm, you need to produce 200.mL of 1.00 M a phosphate buffer solution of pH = 7.19. The pKa of H2PO4− is 7.21. You have 2.00 L of 1.00 M KH2PO4 solution and 1.50 L of 1.00 M K2HPO4 solution, as well as a carboy of pure ...
September 14, 2013 by moses

Chemistry
As a technician in a large pharmaceutical research firm, you need to produce 100.mL of 1.00 M a phosphate buffer solution of pH = 7.45. The pKa of H2PO4− is 7.21. You have 2.00 L of 1.00 M KH2PO4 solution and 1.50 L of 1.00 M K2HPO4 solution, as well as a carboy of pure ...
March 31, 2014 by Billy Bob Reynolds

chemistry
The administration of 100mg or more of morphne (molar mass 283) to a patient would be lethel. which of the following would you consider to be a safe dose. a. 100ml of a 20 percent solution (w/v) b. 50ml of a 2 M solution c. 25ml of a 10g/100ml solution d. 0.5ml of a 1M ...
May 14, 2014 by tal

chemistry
in what ratio 0.2M NaCl and 0.1M CaCl2 solutions are to be mixed so that in the resulting solution, the concentration of negative ions is 50% greater than the concentration of positive ions?
April 16, 2015 by jaimi

chemistry
Calculate the molarity of a solution in which 0.75 moles of a solute are dissolved in 125g of solution (density of solution = 1.05g/mL). I did this much: 1.05 * 1L/1000mL = 0.001 L I don't really know what to do.
May 2, 2008 by Lisa

Chemistry
You have a .200M solution of NaCl. if you pipette 2.00 mL of the solution into a 25mL volumetric flask and dilute it to the mark, then what is the molarity of the new solution
October 24, 2010 by mikey

Math
Find all real number solutions to (cubed root 3x-8)-1=0 If there is more than one solution, separate them with commas. If there is no solution, answer as "No solution."
January 27, 2011 by Hannah

Chemistry
a titration experiment 20 mL solution of hydrochloric acid required 15.2mL of a .879 M barium hydroxide solution. What was the molar concentration of the HCl solution?
October 11, 2011 by Chris

chemitry
help me.. The pKa of acetic acid, HC2H3O2, is 4.76. A buffer solution was made using an unspecified amount of acetic acid and 0.30 moles of NaC2H3O2 in enough water to make 2.00 liters of solution. Its pH was measured as 4.40. How many moles of HC2H3O2 were used?
April 24, 2015 by Azy

Chemistry
Complete this table of values for four aqueous solutions at 25 C. Solution A: [H+]=0.0093M [OH-]=? pH=? pOH=? Solution B: [H+]=?[OH-]=1.4e-6M pH=? pOH=? Solution C: [H+]=?[OH-]=? pH=5.36 pOH=? Solution D: [H+]=?[OH-]=? pH=? pOH=10.14
October 20, 2011 by Help

Chemistry
Complete this table of values for four aqueous solutions at 25 C. Solution A: [H+]=0.0093M [OH-]=? pH=? pOH=? Solution B: [H+]=?[OH-]=1.4e-6M pH=? pOH=? Solution C: [H+]=?[OH-]=? pH=5.36 pOH=? Solution D: [H+]=?[OH-]=? pH=? pOH=10.14
October 20, 2011 by Help

chemistry
[Cl-] in PbCl2 solution, M? [Pb2+] in PbCl2 solution, M? ksp? #moles : AgCl(s)= Cl(aq) Pb2+(aq)= Temp of solution =20.2 volume of Pbcl2 solution=25.00ml mass of dry AgCl2(g)=0.2543g
April 26, 2010 by Anthony

Chemistry (solubility product question)
"When 3.00 ml of a 0.00600 M K2CrO4 solution and 3.000 ml of a 0.0100 M Cu(NO3)2 solution are mixed, some solid forms. The mixture is centrifuged and the supernatant is removed. The absorbance of the supernatant, measured at 400 nm in a 1.00 cm cuvette, is 0.286. The ...
April 10, 2015 by Nikki

Chemistry
3) A student dissolves a 1.18g aspirin tablet in water and titrates the solution with a .265M NaOH. 22.05mL of NaOH are required to reach the equivalence point. Calculate the percentage of acetylsalicylic acid in the tablet.
October 25, 2010 by Juliet

Chemistry
The solubility of a substance is 12.0 g per 100.0 g of water at 60 C. How many grams of the substance can crystallize from a saturated solution that contains 200.0 g of water at 60 C if the solution is cooled to 20 C?
March 18, 2012 by Stephanie

Chemistry - Molarity
Potassium hydrogen phthalate is a monoprotic acid. Dihydrogen phthalate (H2C8H4O4) is a diprotic acid. An analyte sample contains 0.127 M KHP and 0.0678 M H2C8H4O4. What volume of a 0.205 M NaOH solution is required to neutralize 25.0 mL of the analyte solution? Molar masses: ...
December 10, 2012 by Amy

chem
a 45.8mL sample of a 5.8 M KNO3 solution is diluted to 1.00L. What volume of the diluted solution contains 15.0g KNO3? how do you do this? moles of solution: 5.8*.0458 moles Grams of solute= moles*molmassKNO3 Volume of 15g= 1000ml*15/gramssoluteabove
April 5, 2007 by kyle

Chemistry
Hey guys I did a lab and I have to answer the questions relating to the lab. I did question can someone please check if these are accurate 1. Calculation to Determine the molecular weight of unknown substance Mass of unknown used: 2.0232 g Mass of water used: 50.0 g (0.05kg) ...
February 3, 2010 by Saira

Chemistry
you add excess sodium sulfate to a solution of a soluble barium compound in order to precipitate all of the barium ion as barium sulfate, BaSO4. Suppose a 458 mg sample of the barium compound is dissolved to create the solution. Then when the sodium is added, 513 mg of barium ...
March 12, 2012 by India

Chemistry
you add excess sodium sulfate to a solution of a soluble barium compound in order to precipitate all of the barium ion as barium sulfate, BaSO4. Suppose a 458 mg sample of the barium compound is dissolved to create the solution. Then when the sodium is added, 513 mg of barium ...
March 12, 2012 by India

Chemistry
The formate ion, (CHO2-), is related to the acetate ion and forms ionic salts with many metal ions. Assume that 9.7416 g of M(CHO2)2 (where M represents the atomic symbol for a particular metal) are dissolved in water. When a solution of 0.200 M sodium sulfate is added, a ...
September 19, 2014 by Aaron

Chemistry
The formate ion, (CHO2-), is related to the acetate ion and forms ionic salts with many metal ions. Assume that 9.7416 g of M(CHO2)2 (where M represents the atomic symbol for a particular metal) are dissolved in water. When a solution of 0.200 M sodium sulfate is added, a ...
September 19, 2014 by Aaron

chemistry
I wanted to double check how to go about creating a 1% solution and a 4% solution. I know that it is 1 part to 99 and 4 part to 96. so I add 1ml of solution and then water and the same for the four percent. I wanted to know if you also had any good site to understand making ...
September 6, 2007 by Tanya

Chemistry
A buffer solution is prepared by adding 14.37g of NaC2H3O2 and 16.00g of acetic acid to enough water to make 500mL of solution. What is the initial concentration of C2H3O2 in the solution? Ka(HC2H3O2)=1.8e-5 HC2H3O2 = H3O+ + c2h3O2 the molar mass of NaC2H3O3 = 82.04 I know ...
April 14, 2012 by Hannah

Chemistry
which property of a distilled water solution will not be affected by adding 50 mL of CH3OH to 100.mL of the water solution at 25? conductivity mass freezing point boiling point please help
February 23, 2011 by Penny

chemistry
Why were we instructed to add distilled water to a metal nitrate solution? What purpose does the water serve in the experiment? Just to add volume so the probe can reach the solution?
October 7, 2013 by Evan

Quantitative Chemical Analysis
assume an unknown sample to be 15% copper, weigh enough dried ore sample to use approximatele 35-45mL of .09M S2O3-. How many grams do I need to measure out to use 40.00mL of the thiosulfate solution?
September 28, 2012 by Jill

chemistry
You dissolved 450.0 g of sugar (C12H22O11) in 150 mL of water. The density of water is 1.00 g/mL a. calculate the molarity of the solution b. calculate the molality of the solution
November 7, 2013 by June

chemistry
estimate the mass of BaSO4 that will be produced when a 100ml of a 2M solution of Ba(NO3)2 in water is added toa 100ml of a 2M solution of NaSO4 in water
April 27, 2014 by Alex

chemisry
A 0.125 gram sample if a monoprotic acid of unknown molar mass is dissloved in water and titrated with 0.1003 MNaOH. The endpoint is reached after adding 20.77 ml of base. What is the molar mass of the unknown acid?
May 4, 2010 by janny

math
A solution of alcohol and water is a% alcohol where a = 40. The solution is found to contain 32 milliliters of alcohol. How many milliliters total (both alcohol and water) are in the solution?
November 8, 2010 by Sabre

Chemistry
4.54 g of hydrazoic acid ( HN3 ) is added to water to make a final solution of 504 ml. What is the pH of the solution ? Use Ka = 1.90 10−5
March 8, 2010 by Chelsea

Chemistry
A solution is made by dissolving 3.550g of Na2SO4 in water using a 100.0 mL volumetric flask. What is the molarity of the solution?
March 12, 2011 by Anonymous

chemistry
What is the molarity (mol/L) of sodium (Na) in a solution containing 0.4 mole ofNa + cation in 400 mL of an aqueous (water) solution?
April 16, 2011 by Ed

maths
what volume of distilled water must be added to 165mls of stock solution to make 1200mls of diluted solution
April 27, 2011 by Anonymous

Chemistry
A solution contains 32g of per 100.0g of water at 25 degree celcius. is the solution saturated, unsaturated, supersaturated
July 24, 2011 by Anonymous

chemistry
A solution of sulfuric acid in water that is 25% H2SO4 by mass has a density of 1178 g/ml. Which expression gives the molarity of this solution?
November 16, 2011 by help

Chemistry
Calculate the density of 150g of a 25% by wieght solution of sodium chloride dissolved in water and the volume of solution is 145ml.
January 24, 2012 by Elaine

CHEMISTRY
What will be the concentration if 52mL of a solution that is 12ppm in sodium chloride is diluted with enough water to make 97mL of solution?
February 14, 2012 by Sarah

AP CHEMISTRY
Calculate the pH of a solution made by adding 3.50 g of lithium oxide (Li2O) to enough water to make 1.290 L of solution. (Kw = 1.0 10-14)
February 16, 2012 by Stanley3000

chemistry - science
calculate molarity of NaOHin the solution prepared by dissolving its 4g in enough water to form 250ml of this solution ?
February 17, 2012 by tania

Chemistry
A solution is prepared by mixing 3.5 g of nitric acid with enough water to make 8.00 L of solution. Find the [H3O+], [OH-], pH and the pOH
March 7, 2012 by Mary

chemistry
you dissolve 0.70 moles of HCI in enough water to prepare 250ml of solution. what is the molarity of the solution you have prepared
April 15, 2012 by aileen

chem
Calculate the molarity of a solution made by dissolving 0.150 in enough water to form exactly 730 of solution
April 18, 2012 by joe

chemistry
What is the molarity of the solution produced when 14.1 grams of ammonia is dissolved in sufficient water to prepare .100 liters of solution?
May 22, 2012 by Drew

Chem 2
A solution is made by mixing 47.0 mL of ethanol, C2H6O, and 53.0 mL of water. Assuming ideal behavior, what is the vapor pressure of the solution at 20 C?
July 14, 2012 by Pagye

Chemistry II
A solution is made by mixing 38.0 mL of ethanol, C2H6O, and 62.0 mL of water. Assuming ideal behavior, what is the vapor pressure of the solution at 20 C?
July 17, 2012 by Sam

Science
10.0 g of KCl and 18.5 g of CaCl2 were dissolved in 500 mL of water. How many mL of 1.57 M AgNO3 solution would be required to precipitate all Cl- from the solution?
October 19, 2012 by Jared

chemistry
Calculate the molarity of the K+ ion in a solution prepared by adding of 5.55 g of K2SO4 to enough water to form 0.500 L of solution.
December 15, 2012 by julie

chem
Calculate the pH of a solution made by adding 3.20 g of lithium oxide (Li2O) to enough water to make 1.210 L of solution. (Kw = 1.0 10-14)
March 7, 2013 by sara

chemistry
Calculate the molarity of the K+ ion in a solution prepared by adding of 5.55 g of K2SO4 to enough water to form 0.500 L of solution.
April 3, 2013 by kelli

chemistry
A solution is made by dissolving 0.10 mole of Na2SO4 in water to a final volume of 1.00 L. What is the molar concentration of Na+ ions in the solution?
April 5, 2013 by Dolores Ramirez

Chemistry
A 2.5% KCl solution is prepared by dissolving enough of the salt to give 181.4 g of solution. What mass (g) of water is required?
April 8, 2013 by Linzy

chemistry
A solution contains 25.5 g of NaCl dissolved in sufficient water to give a total mass of 325.0 g. What is the molality of the solution
May 10, 2013 by Adrian

Chemistry
Will the 90-100 mL of distilled water added to the acid solution (10.00 mL) significantly change the moles of H3O+ in the 1.00 M HCl solution? Why or why not?
October 5, 2013 by Ash

pharmacy math
In what proportion should you combine 1:30 soaking solution and distilled water to create a 500ml solution of 1:70 concentration?
March 3, 2014 by Anonymous

science
A solution is prepared by mixing 90 ml of 5 M HCl and 30 ml of 8 M HNO3. Water is then added until the final volume is 1 L. Calculate the [H+], [OH-], and the pH for this solution.
February 17, 2015 by polly

Chemistry
Hi, can you help me with this question: "you have 25.00 mL of a 0.1000 M sugar solution. How much water must be added to make a 0.025 M solution? Thank you.
March 29, 2015 by Cassandra

Chemistry
40.0 grams of Al2S3 are dissolved into 200ml of water yielding 220ml of solution, what is the percent strength of the solution?
April 21, 2015 by Hattie

College Chemistry
A buffer solution contains 0.120M acetic acid and 0.150M sodium acetate. a. How many moles of acetic acid and sodium acetate are present in 50.0 ml of solution? b. if we add 5.55 mL of 0.092M NaOH to the solution in part (a) how many moles of acetic acid , sodium acetate, and ...
November 10, 2010 by Elizabeth

Chemistry Help.......
Sulfuric Acid (H2SO4) is a strong acid, which dissociates when dissolved in water according to the following equation: H20SO4(aq)-> 2H+(aq) + SO4 2- (a) A 0.21g sample of sulfuric acid is dissolved completely in sufficiebt water to make 0.25litre of the final solution. ...
March 4, 2007 by Adam

Chem9
An aqueous solution containing 35.1 grams of an unknown molecular (noneolectrolyte) compound in 152.5 grams of water was found to have a freezing point of -1.8 degrees C. Calculate the molar mass of the unknown compound.
May 2, 2011 by Ryan

chemistry
sorry to keep bugging you, but if it makes you feel better i am understanding it more. what if you have the same numbers, but you are trying to find the concentration of an UNKNOWN acid. all you have is: Volume of Unknown Acid Volume of Stock Solution Concentration of Stock ...
October 31, 2008 by Vanessa

chemistry
Calculate ∆T for the reaction. Assume the initial temperature of both reactants is 25.0◦C. Calculate the volume of the reaction mixture. Calculate the mass of the reaction mixture. Assume the density of the mixture is 1.03 g mL^(-1). Calculate the heat transferred ...
October 22, 2014 by Anonymous

Chemistry
Please read to the bottom - This help was wonderful and absolutely correct, I'm asking a bit more regarding the same question, please read below. Imagine that you have been asked to prepare 500ml of a 0.25 mol L solution of Sodium Hydroxide, NaOH. Describe how you would ...
October 15, 2010 by Dexter

Chemistry
10.0 g of an unknown acid is titrated to the equivalent point using 65.0 ml of 0.150M KCH. Assuming the acid is monoprotic ( like HCL or HF ) , what is the molecular mass of the acid? Is it possible to find the mols of the acid? (Balanced equation & solution please!)
June 6, 2014 by Gage

Chemistry
10.0 g of an unknown acid is titrated to the equivalent point using 65.0 ml of 0.150M KCH. Assuming the acid is monoprotic ( like HCL or HF ) , what is the molecular mass of the acid? Is it possible to find the mols of the acid? (Balanced equation & solution please!)
June 6, 2014 by Gage

chemistry
an aqueous solution solution of sodium borate is sometimes used to to fire-proof wood. a. what is the molarity of 2.50 L of solution that contains 1.85 moles of sodium borate? b. what is the molarity of 45.0 L of solution that contains 6.78 kg of sodium borate? c. how manny ...
April 7, 2013 by Jessica

chemistry
a titration is done with with 25.00 mL of a .1500 M HBrO solution is titrated with .1025 M NaOH. Ka for HBrO= 2.0 x10^-9. The pH of HBrO before the titration begins is approx. closest to which of the following a. 0.82 b. 4.76 c. 8.70 d 10.60 e. 13.01 the answer is b 4.76 but how?
October 11, 2010 by anon

chemistry
The traditional method of analyzing the amount of chloride ion present in a sample was to dissolve the sample in water and then slowly add a solution of silver nitrate. Silver chloride is very insoluble in water, and by adding a slight excess of silver nitrate, it is possible ...
March 16, 2010 by James

Gen. Chem
To make a solution with a pH = 4.40 a student used the following procedure : a certain amount of sodium acetate along with 0.280 moles of acetic acid is added to enough water to make a solution of 1.00 L How many grams of sodium acetate were added ? Ka = 1.80 x 10 -5
March 22, 2010 by Rinzin

Chemistry
Calculate [CO32- ] in a 0.019 M solution of CO2 in water (H2CO3). If all the CO32- in this solution comes from the reaction shown below, what percentage of the H+ ions in the solution is a result of the dissociation of HCO3‾? HCO3‾(aq) H+(aq) + CO32-(aq)
November 23, 2011 by Kaleen

Chem II
What is the boiling point of an aqueous solution of a non electrolyte that has an osmotic pressure of 10.50atm at 25 degrees C? Kb of water is 0.52 degrees C/m. Assume the density of the solution is the same as that of pure water.
June 6, 2008 by Ken

Differential Equations
For the following initial value problem: dy/dt=1/((y+1)(t-2)) a)Find a formula for the solution. b) State the domain of definition of the solution. c) Describe what happens to the solution as it approaches the limit of its domain of definition. Why can't the solution be ...
January 31, 2013 by Erica

chemistry
23 grams of NaOH is dissolved in 1.5L of water, find; a)Concentration of the solution b)pOH c)pH
January 20, 2013 by Patrick

chemistry
How many kg of wet NaOH containing 12% water are required to prepare 60 litre of 0.5N solution?
April 16, 2015 by jaimi

Chemistry
A 30.00ml sample of 0.1234 M hypobromous acid (HBrO) is titrated with a 0.2555 M KOH solution. The Ka for HBrO is 2.5*10^-9 Calculate the pH of teh titration mixture at the equivalence point.
April 17, 2010 by Anonymous

chemistry
If a crystal added to an aqueous solution causes many particles to come out of the solution, the original solution was___? A: saturated. B: an emulsion. C: supersaturated. D: unsaturated
August 4, 2008 by kayla

Chemistry
If 2.00 liters of 0.580 M CuSO4 solution is electrolyzed by passing 1.70 amps through the solution for 2.00 hr using inert electrodes. What is the [Cu2+] in the solution at the end of the electrolysis?
April 3, 2011 by Mango

chemistry
how do i know if the buffering capacity of a buffer solution is lost? Is that when after I add more of an acid or base to the solution that the pH eventually goes past + or - 1 of the original solution?
January 30, 2012 by laura

AP Chem
Calculate the correct volumes of the 0.1M acetic acid solution and the 0.1M sodium acetate solution needed to make 50mL of a buffer solution with a pH vaule of 5.00. (Ka = 1.8x10^-5)
March 11, 2012 by Keighley

science
how can i prepare this solution? Dissolve 24.82g of sodium thiosulphate in each cubic decimeter of solution to make astock of 0.1M. Dilute this solution 20-fold. URGENT PLEASE!!!!!!!!!!!!!!!
January 29, 2013 by khumalo

Chemistry
An unknown solid acid is either citric acid or tartaric acid. To determine which acid you have, you titrate a sample of the solid with NaOH. The appropriate reactions are as follows: Citric acid: H3C6H5O7 (aq) + 3NaOH (aq) -> 3H2O (l) + Na3C6H5O7 (aq) Tartaric acid: ...
May 7, 2013 by Sarah

Math
1) Solve: 8x C (6x + 4) = 8 x = -2 2) -7x > 1/15 the solution set is: {x | x > -105} 3) Solve 5> -4x + 4 or 10 -4x +3 the solution to the inequality is: [-, -7/4] U [-1/4,] 4) Use < or > to make the statement true: -9 < 3 5) Graph the inequality on a ...
November 5, 2008 by Algebra HELP!!!

chemistry
formic acid is a monoprotic acid with a ka at ml solutionof m of formic acid solution is titrated with m naoh what is the ph at the equivalence point
March 29, 2011 by Omar

Chemistry
Assuming that sea water is a 3.5 wt % solution of NaCl in water, calculate its osmotic pressure at 20C. The density of a 3.5% NaCl solution at 20C is 1.023 g/mL.
April 13, 2010 by Bob

Chemistry
CaCl2(s) Ca2+(aq) + 2 Cl-(aq) H = -81.5 kJ A 14.0 g sample of CaCl2 is dissolved in 130. g of water, with both substances at 25.0C. Calculate the final temperature of the solution assuming no heat lost to the surroundings and assuming the solution has a specific heat capacity...
November 10, 2007 by Joe

chemistry
How would I calculate the molarity of the resulting solution if 25.0mL of 1.50 M HCL solution is diluted to 500 mL. I know you have to change the milliliters to liters by dividing by 1000 and I know that M= Moles of Solute/Liters of Solute but after that I'm lost. Please help!
July 1, 2011 by Daniel

Chemistry
2. A fluoride electrode is used to determine fluoride in a water sample. Standards and samples are diluted 1:10 with TISAB solution. For a 1.00 x10-3M(before dilution) standard, the potential reading relative to the reference electrode is -211.3mV and for a 4.00 x10-3M ...
October 21, 2014 by Glyn

chemistry
So I posted this question yesterday and was told I had a few typos.... I fixed them and here is the question again... Please help me!!! A solution of ferrous sulfate (FeSO4) is titrated with a solution of potassium permanganate in sulfuric acid. The balanced half reactions are...
January 5, 2010 by amy

chemistry
Why is an Fe3+ solution instead of an Fe2+ solution used in calibrating the spectrophotometer? Note: hydroxylamine hydroxide is added to the Fe3+ solution then 1,10 phenanthroline is added to the solution after the addition of hydroxylamine hydroxide. After these additions, a ...
September 15, 2007 by smiley

  1. Pages:
  2. <<Prev
  3. 16
  4. 17
  5. 18
  6. 19
  7. 20
  8. 21
  9. 22
  10. 23
  11. 24
  12. 25
  13. 26
  14. 27
  15. 28
  16. 29
  17. 30
  18. Next>>

Members