Tuesday
December 6, 2016

Search: An elevator (mass 4125 kg) is to be designed so that the maximum acceleration is 0.0900g. What is the maximum force the motor should exert on the supporting cable?

Number of results: 78,206

physics
what force must the woman in Figure 3.38 exert on the floor with her hands in order to do a pushup?
April 29, 2012 by Anonymous

Math(Please help)
Projectile motion: Let's suppose you throw a ball straight up with an initial speed of 50 feet per second from a height of feet. a) Find the equation that describes the motion as a function of time. My answer was x = 0 and y=-16t^2+50t+6 b) How long is the ball in the air? ...
April 16, 2010 by Abbey

physics
A tennis ball of mass 0.057 kg is served. It strikes the ground with a velocity of 54 m/s (120 mph) at an angle of 21° below the horizontal. Just after the bounce it is moving at 51 m/s at an angle of 19° above the horizontal. If the interaction with the ground lasts 0.064 s...
August 2, 2011 by Ashley

physics
A constant force is exerted for a short time interval on a cart that is initially at rest on an air track. This force gives the cart a certain final speed. Suppose we repeat the experiment but, instead of starting from rest, the cart is already moving with constant speed in ...
January 29, 2013 by Kristal

Physics
Suppose your car was mired deeply in the mud and you wanted to use the method illustrated in the figure to pull it out. (a) What force in newtons would you have to exert perpendicular to the center of a rope to produce a force of 10,000 N on the car if the angle is 1.80°? ...
November 7, 2016 by Sara

physics134
A ball, with a mass of 0.144 kg, is thrown from the top of a 76.8 m building (point A) at an angle, θ = 65º with respect to the horizontal. The initial speed of the ball is unknown. The ball reaches a maximum height of 12 m above the building after which it hits the ...
May 4, 2013 by Anonymous

Physics
A 400.0 KG mass experiences a horizontal push force of +720N And friction force of 320N A) assuming the mass is initially moving at 5.0 m/s far will it travel in 6.0 s? B) how much work does the 720.0 newton force do over the distance determine in part a? C) calculate the ...
October 20, 2015 by Anonymous

physics
A.A pair of narrow, parallel slits separated by a distance of 0.335 mm are illuminated by green laser light with wavelength = 543.0 nm. The interference pattern is observed on a screen 2.43 m from the plane of the parallel slits. Calculate the distance from the central maximum...
March 21, 2010 by Andy

Math
This is for grade 11 math, under quadratic extrema and roots. Fred and Ginger have 24 m of fencing to enclose a garden at the back of their house. From the pictures you can see (shows a large rectangle for the house, with a smaller one attached on the bottom line, to the right...
November 1, 2007 by Laura

maths,science, physics
A block of mass 50kg was left to slide down a ramp elevated at an angle of 45 decrease as shown in the diagram below (assume g=9.8 ms^-2). I . Calculate the net force causing the block to slide down the ramp (assume no friction) II. Calculate the net force causing the block to...
June 5, 2016 by Oxy

Algebra 2 HELP plz
An object is launched upward with an initial velocity of 64 feet per second from a platform 80 feet high. 1.) Write a height model for the object. I wrote my model as .... h=-16t^2 +64t +80 2.) How many seconds until the maximum height is reached? I had 2 seconds as my answer ...
November 12, 2014 by kylie

Physics help
A car travels in a circle whose radius is 31 m, with a speed of 19 m/s. (1) What is the magnitude of the car's acceleration? _____ m/s2 (2) What is the nature (origin) of the horizontal force on the car? (What is exerting the force?) The force causing the car to turn is: ...
October 28, 2012 by arcos15

math
A cable company charges $40 plus $12 for each cable jack. If x is the number of jacks installed, the linear equation is C=12x+40. graph the total
February 20, 2013 by phil

physics
a 3 m long weightless beam is supported at each end by cables. a painter weighing 90 N stands 1 m from the left cable. Calculate the tension in each cable.
March 20, 2013 by markcampo

Physics
A student decides to move a box of books into her dormitory room by pulling on a rope attached to the box. She pulls with a force of 100.0 N at an angle of 25.0° above the horizontal. The box has a mass of 25.0 kg, and the coefficient of kinetic friction between box and floor...
September 22, 2008 by Jenny

Physics
Mass 1 and mass 2 are connected as shown by a massless, non-stretch rope that passes over a massless, frictionless pulley. The masses are on inclines which have friction. When the angles of the string are as given, mass 1 experiences an acceleration up the incline of 1.00 m/s/...
July 25, 2012 by Zac

physics
A ping pong ball (m= 6g) bounces off a table. Before striking the table the ball has a velocity of 4m/s in a direction pheta below the x-axis. It leaves the table with the same speed moving in a direction pheta above the x axis. What impulse does the table exert on the tennis ...
October 22, 2007 by Anonymous

College Chemistry
The sun bombards the earth with about 1KJ m^-2s^-1. Calculate the maximum mass of pure ethanol that can be vaporized in 10 min from a beaker left in strong sunshine, assuming the surface area of the ethanol t be 50cm^2.
August 15, 2012 by James

theory of machine
1. the contact ratio is....... (a)zero (b)more than one (c)less than one (d)none of these 2. the ratio of maximum displacement of the forced vibration to the deflection due to the static force is known as................ (a)damping factor (b)magnification factor (c)damping ...
August 1, 2012 by raju

Physics
An electron of mass 9.11 10-31 kg has an initial speed of 2.60 105 m/s. It travels in a straight line, and its speed increases to 6.00 105 m/s in a distance of 4.40 cm. Assume its acceleration is constant. (a) Determine the magnitude of the force exerted on the electron. ...N...
October 2, 2016 by Jack

physics
what is the maximum speed with which a 1050kg car can round a turn of radius 70 m on a flat road if the coefficient of friction between tires and road is .80? is this result independent of the mass of the car?
January 2, 2011 by Jessie

chemistry
since 1991, house paint produced in Canada must contain no more than 600 ppm of lead. What is the maximum mass of lead permitted ion a 2.50 kg can of paint?
December 15, 2014 by GEORGE`

Physics
A clerk moves a box of cans down an aisle by pulling on a strap attached to the box. The clerk pulls with a force of 189.0 N at an angle of 30.0◦ with the horizontal. The box has a mass of 39.0 kg, and the coefficient of kinetic friction between the box and floor is 0....
November 11, 2014 by Shanii

physics
Could anyone help me set up this equation? I drew my force body diagram but wasn't sure how to include the downward force (im assuming i use either sine or cosine?) A force of 340 N pushes a 54 kg object. Find the acceleration of the box if the force makes an angle of 70 ...
October 3, 2014 by xxhennessy

Science
The same force acts on two objects with different masses. Why does the object with less mass have a larger acceleration?
September 10, 2008 by Stacy

biomechanics
If a soccor ball with a mass of 0.43 kg is kicked while it is in the air, with a force of 15 N oriented 32 degrees above the horizontal, what is the resultant acceleration?
April 8, 2011 by katie

Physics
A motorcycle with a mass of 350 kg is accelerated from rest to a velocity of 30 m/s by a force of 4000 N. calculate the distance over which this acceleration occurred.
April 19, 2011 by helpp

algebra 2
The height of an arrow shot in the air is given by the function h(t)=-16t^2+144t+24, where h(t) represents the height in feet, and t represents the time in seconds. what is the maximum height of the arrow? how long does it take to reach the maximum height? how long does it ...
June 16, 2014 by Anonymous

physics
1. How much acceleration does a 747 jumbo jet of mass 31600 kg experience in takeoff when the thrust for each of four engines is 30000 N? 2. Two boxes are seen to accelerate at the same rate when a force F is applied to the first and 5F is applied to second. What is the mass ...
November 22, 2010 by confused

Physics
You are installing a new spark plug in your car, and the manual specifies that it be tightened to a torque that has a magnitude of 45 N·m. Using the data in the drawing, determine the magnitude F of the force that you must exert on the wrench. Lenght of the wrench is .28 m ...
March 24, 2008 by Zach

Static Equilibrium
This has been causing me some pain. An 89.03 kg person is half way up a uniform ladder of length 3.453 m and mass 22.75 kg that is leaning against a wall. The angle between the ladder and the wall is θ. The coefficient of static friction between the ladder and the floor ...
November 6, 2014 by Rhyan

physics
A 100kg mass starts from rest at the top of an incline plane that makes an angle of 35 degrees with the horizontal, the coefficient of friction of 0.005 between the ramp and the mass. The mass slides down the ramp and then slides to a stop on a surface with coefficient of ...
May 6, 2010 by Ariel

physics
A 100kg mass starts from rest at the top of an incline plane that makes an angle of 35 degrees with the horizontal, the coefficient of friction of 0.005 between the ramp and the mass. The mass slides down the ramp and then slides to a stop on a surface with coefficient of ...
May 6, 2010 by Ariel

Geometry
Hi, one Professor gave me a very hard question, He has a little Disk (used in machines) that has a big hole in the middle, he measured the thickness every 90°, and he got the following measurements: 0.95 mm 1.02 mm 1.02 mm 0.96 mm He tells me that with 3 of these measurements...
May 26, 2009 by Alessio

Geometry
Hi, one Professor gave me a very hard question, He has a little Disk (used in machines) that has a big hole in the middle, he measured the thickness every 90°, and he got the following measurements: 0.95 mm 1.02 mm 1.02 mm 0.96 mm He tells me that with 3 of these measurements...
May 27, 2009 by Alessio

physics mechanics
A 2 kg mass rests on a horizontal table with a light spring with a force constant of 200 Nm-1 attached to it. The coefficient of static friction between the mass and the table is 0.7 and the coefficient of kinetic friction is 0.5. How far must the spring be stretched ...
October 26, 2013 by njood

Physics
1) Planet Zero has a mass of 5.0*10^23 kg and a radius of 2.0*10^6 meters. What is the acceleration of gravity on planet zero? 2)Phobos, a satellite of Mars, has a radius of 11km and a mass of 10^16 kg. Its a bit lumpy, but let's assume its spherical to get a doable problem. (...
December 6, 2014 by Charlie

physics
The problem propmpts us with the info: "Two friends play with a card-board box on a grassy hill side. The boy in the box has a mass of 50.0 kg and the box has a mass of 5.00 kg. The incline of the hill is 44° and its height is 10 meter. Assume that friction plays a negligible...
October 11, 2015 by ana

Algebra
A woman wishes to invest $12,500 in three types of bonds: municipal bonds paying 8% interest per year, bank investment certificates paying 9%, and high-risk bonds paying 12%. For tax reasons she wants the amount invested in municipal bonds to be at least three times the amount...
November 30, 2014 by Jessica

Physics
A range in a national park is driving at 47 km/h when a deer jumps onto the road 70m ahead of the vehicle . After a reaction of t seconds, the ranger applies the brakes to produce an acceleration of -2.00 m/s^2. What is the maximum reaction time allowed if the ranger is to ...
February 14, 2011 by Shannon

physics 1 please help!
A man seeking to set a world record wants to tow a 106000-kg airplane along a runway by pulling horizontally on a cable attached to the airplane. The mass of the man is 77 kg, and the coefficient of static friction between his shoes and the runway is 0.99. What is the greatest...
February 10, 2011 by Hannah

physics 1 please help!
A man seeking to set a world record wants to tow a 106000-kg airplane along a runway by pulling horizontally on a cable attached to the airplane. The mass of the man is 77 kg, and the coefficient of static friction between his shoes and the runway is 0.99. What is the greatest...
February 10, 2011 by Hannah

science
A man seeking to set a world record wants to tow a 106,000-kg airplane along a runway by pulling horizontally on a cable attached to the airplane. The mass of the man is 77 kg, and the coefficient of static friction between his shoes and the runway is 0.82. What is the ...
October 4, 2013 by Donna

physics
A man seeking to set a world record wants to tow a 104,000-kg airplane along a runway by pulling horizontally on a cable attached to the airplane. The mass of the man is 93 kg, and the coefficient of static friction between his shoes and the runway is 0.78. What is the ...
November 17, 2013 by Hanna

Physics 101 (I'm stupid)!
And Astronaut wearing an environment suit has a total mass of 130 kg. What is his weight on earth? What would his weight be on Mars where the acceleration of gravity is 3.26? What is his mass on Mars? Why? If he should end up adrift and deep space what what his mask be? Why?
October 19, 2015 by Haley

Physics 101 (I'm stupid)!
And Astronaut wearing an environment suit has a total mass of 130 kg. What is his weight on earth? What would his weight be on Mars where the acceleration of gravity is 3.26? What is his mass on Mars? Why? If he should end up adrift and deep space what what his mask be? Why?
October 20, 2015 by Haley

physics
A 2.0 kg mass is fastened to a spring with force constant of 45 N/m. The mass is held motionless by a student at a position 15 cm below the spring's natural unstretched position. When the ball is released, what is the Fnet acting on it? What is the acceleration of the ball at ...
June 4, 2014 by grey

physics
Jennifer, who has a mass of 50.0 kg, is riding at 35.0 m/s in her red sports car when she must suddenly slam on the brakes to avoid hitting a deer crossing the road. She strikes the air bag that brings her body to a stop in 0.500 s. What average force does the seat belt exert ...
December 3, 2012 by Chelsey Achord

physics
Discuss the relationship between motion and force including the following terms: velocity, acceleration, equilibrium, contact force, and field force.
May 9, 2013 by Adam

science
Discuss the relationship between motion and force including the following terms: velocity, acceleration, equilibrium, contact force, and field force.
May 9, 2013 by Adam

Ap physics
A person pushes a 15.0 kg lawn mower at constant speed with a force of 77.0 N directed along the handle, which is at an angle of θ = 49.0° to the horizontal . (a) Draw the free-body diagram showing all forces acting on the mower. (Do this on paper. Your instructor may ...
September 10, 2010 by rayray

Physics(Please help)
Some bacteria are propelled by motors that spin hair-like flagella. A typical bacterial motor turning at a constant angular velocity has a radius of 1.9x10-8m, and a tangential speed at the rim of 2.7x10-5 m/s. (a) What is the angular speed (the magnitude of the angular ...
June 9, 2012 by Hannah

physics
When you are running and want to stop quickly, you must decelerate quickly. What is the origin of the force that causes you to stop? Estimate the maximum rate of deceleration of a person running at top speed to come to rest.
September 11, 2009 by perry

Physics
1. A pair of narrow, parallel slits separated by a distance of 0.408 mm are illuminated by green laser light with wavelength of λ = 537.5 nm. The interference pattern is observed on a screen 1.56 m from the plane of the parallel slits. Calculate the distance from the ...
March 23, 2010 by Matt

calculus
A box with a square base is to be constructed with a surface area of 726 square centimeters. 1. Draw a diagram of the box. Label the diagram appropriately with variables. 2. Write an objective equation and a constraint equation (label each one as objective or constraint). 3. ...
April 8, 2015 by Courtney

Math000
The height (in meters) of a projectile shot vertically upward from a point 3 m above ground level with an initial velocity of 21.5 m/s is h = 3 + 21.5t − 4.9t2 after t seconds. (Round your answers to two decimal places.) (a) Find the velocity after 2 s and after 4 s. v(2...
October 13, 2014 by Anonymous

physics
A frictionless massless pulley has 7 kg tied to a cable on the left side and an unknown mass (M) on the right. The unknown mass accelerates downward at 6.6 m/s2 What is the accelerationof the system/tension of the rope
October 13, 2014 by Alex

science
How much work will be necessary for the band members to move the new 120 kilogram amplifier to the garage where they practice, if they were to slide the amplifier a distance of 35 meters on a frictionless surface at an acceleration of 2 meters/second? Show all calculations, ...
November 4, 2009 by anonymous

Physics
The Mariana trench is located in the Pacific Ocean at a depth of about 10300 m below the surface of the water. The density of seawater is 1025 kg/m3 (a) If an underwater vehicle were to explore such a depth, what force would the water exert on the vehicle's observation window...
November 3, 2007 by pete

Physics
The Mariana trench is located in the Pacific Ocean at a depth of about 11800 m below the surface of the water. The density of seawater is 1025 kg/m3. (a) If an underwater vehicle were to explore such a depth, what force would the water exert on the vehicle's observation window...
December 4, 2008 by Brandon

physical sciences
The mass of a minibus is 1500kg,assume that the passenger have an average mass of 50kg each.The driver is moving at a speed of 30m/s when he notice that the traffic light ahead have turned to red.he applied a force of 9000N on the break pedal,calculate acceleration of the taxi...
February 21, 2016 by ascentia

Physics
A charged particle A exerts a force of 2.39 ìN to the right on charged particle B when the particles are 13.3 mm apart. Particle B moves straight away from A to make the distance between them 16.1 mm. What vector force does particle B then exert on A?
February 6, 2010 by Jan

physics
The small piston has a diameter of 2cm and the large piston has a diameter of 6cm. How much more force can the larger piston exert compared with the force applied to the smaller piston?
January 28, 2011 by Anonymous

Physics
A 5 kg magnet exerts a constant force of 3 N on a 0.25 kg magnet. 1) What force will the smaller magnet exert on the larger magnet? Please show step by step including the right equations for this problem
October 2, 2016 by Anonymous

physics
Stephanie serves a volleyball from a height of 0.76 m and gives it an initial velocity of +7.2m/s straight up.How high will the volleyball go? The acceleration of gravity is 9.81 m/s2. Answer in units of m. 2) How long will it take the ball to reach its maximum height? Answer ...
November 12, 2010 by wow

physics
At an outdoor market, a bunch of bananas attached to the bottom of a vertical spring of force constant 16.0 N/m is set into oscillatory motion with an amplitude of 20.0 cm. It is observed that the maximum speed of the bunch of bananas is 39.6 cm/s. What is the weight of the ...
November 9, 2011 by kate

college algebra word problem
Here's the problem I was asked: You are visiting your parents on a farm. They have asked you to design a small rectangular-shaped vegetable garden along an existing wall in their backyard. They wish to surround it with a small fence to protect their plants from animals. You ...
December 2, 2009 by confused

Physics - Torque
Consider a rectangular block of mass 30kg, height= 3m, length = 2m. A force F is applied horizontally at the upper edge. The acceleration of gravity is 9.8 m/s^2. 1)What is the minimum force required to start to TIP the block? 2)What is the minimum coefficient of static ...
April 22, 2007 by Belle

torque problem!
A spring (k =819N/m) is hanging from the ceiling of an elevator, and a 5.1-kg object is attached to the lower end. By how much does the spring stretch (relative to its unstrained length) when the elevator is accelerating upward at a = 0.46m/s^2?
November 8, 2008 by Cecilia

Calculus
Glenview Community College wants to build a rectangular parking lot on land bordered on one side by a highway. It has 380 feet of fencing to use on the other three sides. What should be the dimensions of the lot if the enclosed area is to be a maximum?
March 8, 2012 by Andrew

Math
A stone was thrown from the top of a cliff. The height, H meters, of the stone above sea level t seconds after it was released is given by H=-5t+20t+60. a)How high is the cliff? What makes you say this? b) How high is the stone after two seconds? c) What is the maximum height...
March 5, 2014 by Sally

physics
An electron of mass 9.11 10-31 kg has an initial speed of 3.00 105 m/s. It travels in a straight line, and its speed increases to 8.00 105 m/s in a distance of 10.0 cm. (a) Assuming its acceleration is constant, determine the force exerted on the electron. N (in the direction ...
October 17, 2011 by carlton

Physics
Imagine a fender bender between a large truck and a small car. During the impact, Choose one answer. a. the truck exerts a greater amount of force on the car than the car exerts on the truck b. the car exerts a greater amount of force on the truck than the truck exerts on the ...
February 8, 2013 by Kirk

algebra
In order to achieve maximum results from aerobic exercises, one should maintain ones heart rate at a certain level. A 45 year old women with resting heart rate of 70 beats per minute should keep her heart rate between 135 and 154 beats per minute while exercising. She checks ...
August 26, 2011 by Anonymous

algebra 1
Fiber-optic cables are used widely to increase the speed and accuracy of data transmission. When light passes through a fiber-optic cable, its intensity decreases with the increase in the length of the cable. If 1700 lumens of light enters the cable, the intensity of light ...
July 25, 2014 by nicol

p
A roller coater has a first drop of 140 meters and then enters a circular loop. Find the maximum radius of the loop such that the coaster never leaves the track at the top of the loop. Using the radius found in part 1, calculate the largest centripetal acceleration experienced...
April 9, 2012 by Mary

engg
At a point in a plate subjected to plane stress loading along its surface, the cartesian stress components acting on the x-face of an element oriented along the (x,y) frame are σx=40MPa and τxy=70MPa, The maximum allowable shear stress, to prevent yielding of the ...
October 15, 2014 by knndk

Physics
A 400.0 KG mass experiences a horizontal push force of +720N And friction force of 320N A) assuming the mass is initially moving at 5.0 m/s far will it travel in 6.0 s? B) how much work does the 720.0 newton force do over the distance determine in part a? C) calculate the ...
October 20, 2015 by Anonymous

Physics
A ball of mass 5.3 kg and radius 8 cm rolls without slipping horizontally at 4.3 m/s and hits a spring attached to a wall. What is the maximum change in length of the spring if the spring constant k=41100N/m? (Assume the floor is frictionless)
November 18, 2011 by Jacob

Physics
An object is formed by attaching a uniform, thin rod with a mass of mr = 6.54 kg and length L = 5.12 m to a uniform sphere with mass ms = 32.7 kg and radius R = 1.28 m. Note ms = 5mr and L = 4R. 1)What is the moment of inertia of the object about an axis at the left end of the...
November 7, 2014 by stewart

Physics
A construction crane's cable lifts a 59.5-kg box upward with an acceleration of 1.38 m/s^2. Find the tension in the rope. 501.585 is incorrect.
March 4, 2015 by Reina

physics
Consider two cars, a very large one like a Hummer (mass 5m) and a small one like a Mini Cooper (mass m), both starting at the same point race toward the edge of a cliff. Assume that each car is accelerated by a constant force (same size force on each car) to the edge of the ...
February 15, 2012 by Meg

Physics
In order for a satellite in free fall to maintain uniform circular motion, ______________. a) there must be a tangential acceleration b) there must be angular acceleration c)there must be a centripetal force d) there must be a circumventing force Its either a or c. Can't ...
November 23, 2012 by Kelvin

COM 220
Can anyone help me or help me get started please? ASSIGNMENTS 1. CheckPoint: Full-Sentence Outline • Resources: Organizing Your Research Paper & Bias, Rhetorical Devices, and Argumentation • Due Date: Day 4 [Individual forum] • Review the criteria for full-sentence ...
April 23, 2009 by Jen

Physics
A carefully designed experiment can measure the gravitational force between masses of 9 kg. Given that the density of iron is 7860 kg/m3, what is the gravitational force between two 9.00-kg iron spheres that are touching in N?
June 26, 2012 by Tim

physics
If a force gives a 2-kg object an acceleration of 1.6 m/s2, what acceleration does this same force give to an 8-kg object?
October 12, 2012 by maria

Physics 1
A mass of 8 kg lies on a horizontal, frictionless floor. A force of 53 Newtons pushes to the left (negative x direction) with a force of 53 Newtons. Another force of unknown magnitude pushes the mass in a direction of 28.5 degrees above the positive x axis. The mass is ...
October 1, 2011 by Jon

Physics
A mass of 8 kg lies on a horizontal, frictionless floor. A force of 72 Newtons pushes to the left (negative x direction) with a force of 72 Newtons. Another force of unknown magnitude pushes the mass in a direction of 21.4 degrees above the positive x axis. The mass is ...
October 5, 2011 by Tina

math
According to the center of Science in the Public Interest, the maximum healthy weight for a person who is 5 feet, 5 inches is 150 pounds and the maximum healthy weight for a person 6 feet, 3 inches tall is 200 pounds. The relationship between weight and height is linear. When ...
March 29, 2010 by guitarman

physical scinsce
A cannon that is 10m long is designed to launch a 10kg ball over a castle wall. In order to do this the ball must have a speed of at least 50m/s as it exits the cannon. For every 10kg of explosives used, the force on the ball in the cannon increases by 1000N. How many kg of ...
September 27, 2012 by Christian

physical scinsce
A cannon that is 10m long is designed to launch a 10kg ball over a castle wall. In order to do this the ball must have a speed of at least 50m/s as it exits the cannon. For every 10kg of explosives used, the force on the ball in the cannon increases by 1000N. How many kg of ...
May 9, 2013 by Help

Phy
In the figure, a block of mass m = 3.09 kg is pulled along a horizontal frictionless floor by a cord that exerts a force of magnitude F = 13.7 N at an angle θ = 23.0°. (a) What is the magnitude of the block's acceleration? (b) The force magnitude F is slowly increased. ...
September 26, 2015 by Kyle

physics
a uniform beam of weight 420 N and length 3.2 m is suspended horizontally. On the left it is hinged to a wall; on the right is it supported by a cable bolted to the wall at distance D above the beam. The least tension that will snap the cable is 1200 N. (a) What value of D ...
December 14, 2008 by john

Physics
Hello I have an assignment to do about the force table. I'm not sure about my answers, hope someone could check it for me if I answered correctly. 1.What kind of forces do you use on the force table? Explain about the used forces. Resultant force, Equilibrant and Weight. -...
November 22, 2010 by Aransaja

Geometry (Urgent)
Hi, one Professor gave me a very hard question, He has a little Disk (used in machines) that has a big hole in the middle, he measured the thickness every 90°, and he got the following measurements: 0.95 mm 1.02 mm 1.02 mm 0.96 mm He tells me that with 3 of these measurements...
May 26, 2009 by Alessio

Physics
At an instant when a soccer ball is in contact with the foot of a player kicking it, the horizontal or x component of the ball's acceleration is 810m/s^2 and the vertical or y component of its acceleration is 110m/s^2. The ball's mass is 0.43kg. what is the magnitude of the ...
February 12, 2012 by Natasha

physics
A block of mass m = 5.4 kg is pulled up a θ = 24° incline as in the figure with a force of magnitude F = 35 N. (a) Find the acceleration of the block if the incline is frictionless. m/s2 (b) Find the acceleration of the block if the coefficient of kinetic friction ...
February 21, 2016 by john

WSU PHY
A carefully designed experiment can measure the gravitational force between masses of 8 kg. Given that the density of iron is 7860 kg/m3, what is the gravitational force between two 8.00-kg iron spheres that are touching?
June 26, 2012 by WSU John Doe

Physics
Two loudspeakers emit sound waves along the x-axis. The sound has maximum intensity when the speakers are 35.9cm apart. The sound intensity decreases as the distance between the speakers is increased, reaching zero at a separation of 109.1cm. What is the wavelength of the ...
November 30, 2012 by joane

Physics
If a 65 kilogram load was raised 6 meters in 60 seconds determine the minimum rated wattage of the motor needed to accomplish this assuming the motor is 75% efficient. give your answer in W.
January 31, 2014 by Joe

  1. Pages:
  2. <<Prev
  3. 33
  4. 34
  5. 35
  6. 36
  7. 37
  8. 38
  9. 39
  10. 40
  11. 41
  12. 42
  13. 43
  14. 44
  15. 45
  16. 46
  17. 47
  18. Next>>