Saturday
December 10, 2016

# Search: A solution of sodium hydroxide is standard-

Number of results: 33,580

Chemistry
Vinegar is a dilute solution of acetic acid. In the titration of 5.00 mL of vinegar, 39.75 mL of 0.137 M sodium hydroxide solution was required to neutralize the vinegar to a phenolphthalein end point. Calculate each of the following of the vinegar. (a) the molarity : I got 1....
April 3, 2011 by Mark

chemistry
Imagine that you have been asked to prepare 500ml of a 0.25 mol L solution of Sodium Hydroxide, NaOH. Describe how you would prepare this solution. Include any calculations that you would perform.
October 14, 2010 by Dexter

CHEMISTY
Determine the molarity of sodium cations in solution when 6.21 g of sodium sulflate are mixed with 2.97 g of sodium nitrate in pure water to produce 350.0 mL of solution.......please explain every step. thanks!
December 13, 2010 by Jenni

Chemistry
Sulfur dioxide gas is bubbled through sodium hydroxide solution Write the balanced formula equation for this reaction
April 12, 2011 by Janie

Chemistry
You are investigating the effect of strong base on the solubility of zinc hydroxide, Zn(OH)2 (s). (Ksp= 3 x 10- 15 for Zn(OH)2 (s)) You prepare 1.0 L solution of 0.10M NaOH and add excess zinc hydroxide, Zn(OH)2 (s). Instead of suppresing the solubility, you observe extra ...
April 27, 2016 by Lily

Chemistry
Hello, I had a lab about calorimetry and one of the questions was if the reaction of acetone with hypochlorite is an oxidation/reduction or acid/base. Would the answer be: oxidation/reduction because the oxygen from the hydroxide from the Sodium hydroxide detaches and joins ...
May 16, 2012 by Robert

Chemistry
Calculate the volume of 2.45 M NaI that would be needed to precipitate all of the Hg+2 ion from 185 mL of a 2.44 M Hg(NO3)2. AND Calculate the molarity of an acetic acid solution if 47.81 mL of the solution is needed to neutralize 147 mL of 1.32 M sodium hydroxide.
May 6, 2013 by Marsha

Chemistry
20cubic centimeters of 0.27M sodium hydroxide solution is added to 18.2cubic centimeters of 0.75M hydrochloric acid.To the solution is then added excess magnesium.What volume of hydrogen gas measured at s.t.p evolved?
September 23, 2016 by Doris

chemistry
what is the concentration of the hydroxide ion in a solution if .12 mol of strontium hydroxide are dissolved in water and the final solution volume is 500. mL?
December 8, 2012 by samantha

chemist
What is the concentration of the hydroxide ion in a solution if 0.12 mol of strontium hydroxide are dissolved in water and the final solution volume is 500. mL?
April 28, 2013 by Linnessa

net ionics for lab
an experiment was conducted by measuring the change in temperature of solutions after mixing them together. After figuring out the KJ/mol, write a net ionic equation for each mixture 1) hydrochloric acid and sodium hydroxide (net ionic equation?) 2) nitric acid and sodium ...
February 17, 2012 by Rose Bud

chemistry
hi, I am trying to find the solubility of Sodium Acetate by using 0.100 mol Hydroxide(base) and 0.837 mol acetic acid( vinegar). The theoretical solubility of sodium acetate is 82.3g/100ml at 25C. Doing calculations we would want NAOH concentration of 10.47mol/l to react with ...
June 3, 2008 by john

chemistry
Write the molecular,complete ionic, and net ionic equations for the reactions that occur, if any, when solutions of the following substances are mixed: a) nitric acid and potassium carbonate b) sodium bromide and lead nitrate c) acetic acid and calcium hydroxide d) calcium ...
November 19, 2015 by Lyndsay

Chemistry
Write the balanced chemical equation for each of these reactions. Include phases. When aqueous sodium hydroxide is added to a solution containing lead(II) nitrate, a solid precipitate forms. However, when additional aqueous hydroxide is added the precipitate redissolves ...
May 11, 2012 by Sarah

chemistry
You are tasked with preparing a 500mL nutrient solution containing 5mg/L of phosphorous (P), 3mg/L nitrate (NO3 -) and 100 mg/L chloride (Cl-). To make this solution, you have powdered sodium chloride, a 100 mg/L solution of phosphorus, a 1000 mg/L of sodium nitrate (NaNO3) ...
January 13, 2014 by Bruce

chemistry
how many grams of sodium chloride are produced if 25.00 mol of sodium hydroxide are used
June 29, 2011 by mauricio

chemistry again ..
haphthalen-2-ol dissolved into sodium hydroxide solution to give another solution B. What would be formed when solution B reacted with phenylamine/nitrous acid mixture , butylamine/nitrous acid mixture and ammonia/ nitrous acid respectively ? The resulting solution are red , ...
December 6, 2008 by initial D

Chemistry
1.Write a mathematical equation that can be used to calculate the concentration of the HCl solution after the standardization procedure (Titration #1). 2. Using LeChatelier’s principle, predict whether [OH-] in the calcium hydroxide/0.050 M NaOH solution is expected to be ...
April 16, 2012 by Cassie

Chemistry
comparing and contrasting why is sodium hydrogen carbonate an effective antacid but sodium hydroxide is not?
April 27, 2014 by Luke

Chemistry
comparing and contrasting why is sodium hydrogen carbonate an effective antacid but sodium hydroxide is not?
April 27, 2014 by Andrea

chemistry
Suppose that 50mL of a solution of sulfuric acid of unknown concentration was titrated with a 0.100M solution of sodium hydroxide. If it took 45.5 mL of titrant to reach the equivalence point, what was the concentration of the unknown solution of sulfuric acid???
July 7, 2013 by Coach

Chem AS
On addition of aqueous sodium hydroxide to an aqueous solution of salt R, a white precipitate is obtained, soluble in an excess of the hydroxide. A white ppt is also obtained when R is treated with aqueous ammonia , but it is insoluble in excess. Which of the following could ...
October 6, 2014 by Ariana

Chemistry
4.How many grams of calcium chloride can be prepared if a student uses 500g if calcium carbonate and 2.00L of a 4.00 Mol/L sodium chloride solution in the reaction.?? 5. 2KMnoO4 + 5 H2C2O4<----need to use this Concentration of 0.24L KMnO4 solution required to oxidize 2.7g ...
June 5, 2009 by Alex

Chemistry (reaction with amine)
haphthalen-2-ol dissolved into sodium hydroxide solution to give another solution B. What would be formed when solution B reacted with phenylamine/nitrous acid mixture , butylamine/nitrous acid mixture and ammonia/ nitrous acid respectively ? The resulting solution are red , ...
December 6, 2008 by initial D

ap
If aqueous hydrofluoric acid is reacted with sodium hydroxide, which of the following sub- stances are in the net ionic equation? 1. fluoride ion, hydronium ion, and water 2. hydrofluoric acid, sodium ion, hydroxide ion, and fluoride ion 3. hydrofluoric acid, hydroxide ion, ...
October 1, 2012 by cheri

Chemistry
Why should the sodium hydroxide pellets be completely dissolved in the preparation of the NaOH solution? please explain thouroughly, thanksss in advance!!
March 18, 2011 by Maria

international university of east africa.chemistry
20cm of sulphuric acid required 18.5cm of 0.1M sodium hydroxide solution for complete neutralisation.
November 24, 2015 by cosmas

Chemistry
I don't really understand how to do this problem, or where to start exactly. Can someone explain to me where to start and how I can solve the problem in a step by step process? Thank you in advance! 1. An acetic acid / sodium acetate buffer solution is also 0.020 M AlCl3. The ...
March 25, 2014 by Aaron

chemistry
How many moles of sodium hydroxide are produced when 0.155 mole of sodium reacts with excess water?
February 24, 2012 by Cris

science
How many grams of sodium hydroxide will be produced when 23 gram of sodium reacts with wates at ordinary temperature ?
September 16, 2015 by krishna gupta

1)What is the pH of a saturated solution of lead(II) hydroxide? The Ksp= 4.0e-15 Pb(OH)2 4.0e-15 = (x)(2x)^2 = 4x^3 I divided by 4 and took the cube root and got 1.12e-5 but I am not sure I took the cube root correctly. -log(1.12e-5)= 4.95 14-4.95 = 9.05 The answer choices ...
April 9, 2012 by Hannah

Chemistry
4.80 dm^3 of chlorine gas was reacted with NaOH solution. a) how many moles of Cl2 reacted b) what mass of NaOCl was formed? c) if the concentration of the NaOH was 2.00 mol/dm^3. What volume of sodium hydroxide solution was required? d) write an ionic equation for this reaction
July 12, 2016 by Gary

Chemistry
In the qualitative analysis scheme, magnesium and nickel precipitate from solution upon the addition of sodium hydroxide. Once separated from the remaining cations by filtration or decanting, the solid mixture is acidified and warmed to dissolve magnesium and nickel cations ...
November 17, 2016 by Ashley

Chemistry
1.What mass of NaOH(s) must be added to 300 mL of HCl 0.25 M in order to completely neutralize this acid? 2.During a lab, you mix 2 solutions: a 100 ml solution containing 0.40 g of NaOH and a 100 mL solution containing 0.73 g of HCl. What is the concentration of H+ ions in ...
May 9, 2013 by Talulla

Chemistry
when pure sodium hydroxide is dissolved in water , heat is evolved in a laboratory experiment measure a molar heat of solution of sodium hydroxide the following procedure was followed. to a calorimeter containing 300g of water at 20.0 C and 10.65g of NaOH also at 20.0 C was ...
March 23, 2007 by jim

Chemistry AP
How many moles of sodium hydroxide would have to be added to 125 mL of a 0.411 M nitrous acid solution, in order to prepare a buffer with a pH of 2.990?
November 11, 2009 by Jessica

chemistry
What volume in mL of 0.0985 M sodium hydroxide solution is required to reach the equivalence point in the complete titration of a 15 mL sample of 0.124 M phosphoric acid?
December 9, 2012 by What?

chemistry
What volume in mL of 0.0985 M sodium hydroxide solution is required to reach the equivalence point in the complete titration of a 15 mL sample of 0.124 M phosphoric acid?
December 10, 2012 by What?

science
calculate the concentration for the reaction of 0.25mole 0f sodium hydroxide NaOH and water H20 solution of 250cm^3. Provide the answer in cubuc decimeter
September 16, 2013 by clay

Chemistry
A sample of sodium hydroxide of volume 11 mL was titrated to the stoichiometric point with 24.5 mL of 0.138 M HCl(aq). What is the initial molarity of NaOH in the solution? Answer in units of M.
May 29, 2016 by Andrea

Chemistry
Acetic acid (HOAc) is a weak acid with a Ka= 1.8 X 10^-5 and sodium hydroxide (NaOH) is a strong base. What is the pH of a solution made by mixing 75.0 ml of a 0.160 M solution NaOH and 25.0 ml of a 0.640 M solution of HOAc? I got a pH of 5.22, but I am not sure if this is ...
May 12, 2009 by Chelsea

Chemistry
Solutions of sodium hypochlorite, NaClO are sold as bleach. They are prepared by the following reaction: 2NaOH + Cl2 --> NaCl + NaClO + H2O If you have 2.32 mol of NaOH and 2.74 mol of Cl2 ga available to react, answer the following questions Na: 23.0 amu Cl:35.5 amu O: 16....
May 1, 2015 by Sara

Chemistry
A weighed amount of sodium chloride is completely dissolved in a measured volume of 4.00 M ammonia solution at ice temperature, and carbon dioxide is bubbled in. Assume that sodium bicarbonate is formed until the limiting reagent is entirely used up. The solubility of sodium ...
February 25, 2015 by JUNDY

Chemistry
A volume of 60.0mL of aqueous potassium hydroxide (KOH ) was titrated against a standard solution of sulfuric acid (H 2 SO 4 ). What was the molarity of the KOH solution if 25.7mL of 1.50 M H 2 SO 4 was needed? The equation is 2KOH(aq)+H 2 SO 4 (aq)¨K 2 SO 4 (aq)+2H 2 O(l)
September 26, 2013 by Sarah

Organic Chemistry
2. Why doesn’t the neutral organic compound (Flourene) dissolve in 1.5 M sodium hydroxide solution?
November 4, 2008 by Dora

Chemistry
Describe the process by which adding potassium hydroxide to a saturated aluminum hydroxide solution reduces the concentration of aluminum ions. Write the solubility equilibrium equation and solubility product constant expression for a saturated aqueous solution of aluminum ...
May 18, 2010 by Alex

Chemistry
You use 11 ml of a 1M H2SO4 solution to titrate 6ml of ammonium hydroxide solution. What was the concentration of the ammonium hydroxide solution?
December 3, 2010 by Eddie

Chemistry
if 75.0 ml of 1.5m sodium hydroxide reacts with 100.0 ml of 2.0m phosphoric acid, to give sodium phosphate and water, how many grams of Na3Po4 may be produced?
September 1, 2015 by Joe

Chemistry
Calculate the pH of the solution formed by adding 15.0ml of 0.1M sodium hydroxide to 30.0ml of 0.1M propanoic acid.
January 19, 2014 by Fritz

Chemistry
Which of the following reactions needs to be reversed to solve for the Heat of Neutralization between Hydrochloric Acid and Ammonia? Acetic Acid + Sodium Hydroxide Hydrochloric Acid + Sodium Hydroxide Acetic Acid + Ammonia
March 29, 2010 by Cam

Chemistry
A sodium hydroxide sample is contaminated with sodium chloride. A 0.240 gram sample of this impure sample is dissolved in water and titrated with 21.50 mL of 0.130 M H2C2O4. Calculate the percent sadium hydroxide in the impure sample [(mass of NaOH in impure sample/mass of ...
July 15, 2015 by Sam

Chemistry
A volume of 50.0 mL of aqueous potassium hydroxide was titrated against a standard solution of sulfuric acid. What was the molarity of the KOH solution if 19.2 mL of 1.50 M H2SO4 was needed? The equation is 2KOH(aq) +H2SO4(aq)-» K2SO4(aq)+2H2O(l)
October 3, 2010 by Ellen

chemistry
How many grams of NaOH are contained in 5.0 × 102 mL of a 0.77 M sodium hydroxide solution? The molar mass of NaOH is 40.0 g/mol.
October 15, 2014 by Dystinee

Chem
The following questions refer to the following system: A total of 30.0 mL of a .10M solution of a monophonic acid (Ka = 1.0 x 10 ^-5) is titrated with .20M sodium hydroxide solution. 1) Before the titration begins, the pH of the solution is about A) 2 B) 5 C) 7 D) 9 E) 12 2) ...
April 6, 2014 by Charlie

Chemistry
Sodium metal dissolves in liquid mercury to form a solution called a sodium amalgam. The densities of Na(s) and Hg(l) are 0.97 g/cm3 and 13.6 g/cm3, respectively. A sodium amalgam is made by dissolving 1.0 cm3 Na(s) in 20.0 cm3 Hg(l). Assume that the final volume of the ...
December 11, 2011 by bernan

Chmistry
Sodium metal dissolves in liquid mercury to form a solution called a sodium amalgam. The densities of Na(s) and Hg(l) are 0.97 g/cm3 and 13.6 g/cm3, respectively. A sodium amalgam is made by dissolving 1.0 cm3 Na(s) in 20.0 cm3 Hg(l). Assume that the final volume of the ...
December 13, 2011 by bernan

Chemistry
Iron (III) hydroxide is soluble in acid: Fe(OH)3(s)3H^+(aq)-->Fe^3^+(aq)+3H2O(l) a. How many milliliters of 1.00 M HCl are needed to dissolve 1.00 g of iron (III) hydroxide? b. If you added enough HCl to dissolve the 1.00 g of iron (III) hydroxide and then diluted the ...
November 11, 2012 by Kelly

chemistry
200cm^3 of 1.0 mol dm^-3 sulphuric acid,H2SO4 is poured into a 250 cm^3 volumetric flask.Distilled water is then added to make 250 cm^3 of solution. (a)What is the molarity of the diluted acid solution? (b)What is the volume of 1.6 mol dm^-3 sodium hydroxide,NaOH solution ...
May 7, 2014 by mandy

Chem Help
If you are given a 0.27 g piece of sodium metal to react with water, how many moles of HCl would it take to neutralize the sodium hydroxide produced?
November 16, 2009 by Anonymous

chemistry
If you are given a 0.32 g piece of sodium metal to react with water, how many moles of HCl would it take to neutralize the sodium hydroxide produced?
November 17, 2009 by Jim

chemistry
If a solution of barium hydroxide contains 9.1x1025 hydroxide ions, how many grams of barium hydroxide were originally dissolved?
December 13, 2015 by Anonymous

Chemistry
I still need help with this problem... Calculate the concentration of the solution the molality of hydroxide ions in a solution prepared from 9.16 g of barium hydroxide dissolved in 179 g of water I do not know how to approach this...I keep doing something wrong.
February 15, 2010 by Trixie

Chemistry
An aqueus solution of sodium mitrate(NaNO3) contains 0.85 grams of sodium nitrate and its concentration is 0.1mol L^-1. What is the volume. in millilitres, of the sodium nitrate solution?
August 25, 2012 by Jeconiah

Chemistry
If 25.0mL of sodium nitrate solution (0.100mol/L) is added to 10.0mL of sodium carbonate solution (0.150 mol/L), what is the concentration of sodium ions in the resulting mixture? Assume the volumes are additive.
May 13, 2009 by Tom

college
sodium metal dissolves in liquid mercury to form a solution called a sodium amalgam. the densities of Na(s) and Hg(l) are 0.97g/mL and 13.6g/mL. a sodium amalgam is made by dissolving 1.0 mL Na(s) in 20.0 mL Hg(l). the final volume is 21.0 mL. What is the molality of Na in the...
May 17, 2011 by Amy

Physical Sciences
I have a project practical investigation to do and I have no idea how to go about with it. The problem is: Calculate the mass of sodium hydroxide used to prepare a 0,5M NaOH solution in a 250ml volumetric flask. Determine the concentration of the acetic acid solution used (...
August 10, 2012 by Cindy

chemistry 12
Calculate [H3O] an [OH] for a sodium hydroxide solution having a pH of 12.5. I'm having a hard time with this i'm not sure how to start it. Please help me!
October 6, 2011 by Sarah

chemistry
Why is an Fe3+ solution instead of an Fe2+ solution used in calibrating the spectrophotometer? Note: hydroxylamine hydroxide is added to the Fe3+ solution then 1,10 phenanthroline is added to the solution after the addition of hydroxylamine hydroxide. After these additions, a ...
September 15, 2007 by smiley

Chemistry
Explain how the calculated molarity of the potassium permanganate would be affected by each of the following experimental errors. In each case, you must also state if the calculated molarity is higher or lower than the actual morality. a) Some sodium oxalate was spilled after ...
December 1, 2011 by 4B

Chemistry
Explain how the calculated molarity of the potassium permanganate would be affected by each of the following experimental errors. In each case, you must also state if the calculated molarity is higher or lower than the actual morality. a) Some sodium oxalate was spilled after ...
December 1, 2011 by P102

10% (m/m) sodium hydroxide solution, NaOH, is used to break down wood fibre to make paper. a) What mass of solute is needed to make 250mL of 10% (m/m) solution? b) What mass of solvent is needed? c) What is the molare concentration?
December 10, 2008 by Kairi

chemistry
What mass in grams of sodium hydroxide is produced if 20.0 g of sodium meal reactts with excess water according to the chemical equation 2 Na(s)+2 H2O(l)=2 NaOH(aq)+H2(g)?
April 23, 2008 by Anonymous

Chemistry Help!!
sodium metal reacts violently with water to produce aqueous sodium hydroxide and hydrogen gas. calculate the enthalpy change for this reaction.
October 11, 2011 by Maci

Chemistry
what mass in grams of sodium hydroxide is produced if 20.0g of sodium metal reacts with excess water according ro the chemical equation, Na(s)+H2O4->naoh(aq)+h2(g)
March 10, 2013 by Fatima

chemistry check
Dr.Bob you had told me to ignore 2x so I wondering if I wrote my did these steps correctly. Calculate the molar solubility of nickel (II) hydroxide in 0.100 M sodium hydroxide The solubility product of nickel (II) hydroxide at 25°C is 1.6 x 10-16. Ni(OH)2 <=> Ni2+ + 2OH...
May 17, 2007 by mel

Chemistry
The solubility product constant of Calcium hydroxide is 6.5 * 10^-6 . If 0.10 mo of sodium hydroxide is added to 1 L of 0.0001 M Ca(OH)2, what is the final concentration of the calcium ion? Show your work.
May 18, 2016 by Ian

chemistry
A student added 50cm^3 of 1.00 moldm^-3 sulphuric acid to 25cm^3 of 1.00 moldm^-3 sodium hydroxide. Calculate the pH of the solution formed.
January 4, 2013 by Amy

Chemistry
A given solution contained potassium chloride, KCl, and hydrochloric acid. 25 cm3 of it needed 24.80 cm3 of 0.0986 M sodium hydroxide solution to neutralize the acid, and the neutral solution then required 23.55 cm3 of 0.2 M silver nitrate, AgNO3, solution to precipitate all ...
October 6, 2014 by Desirai

CHEMISTRY
Which of the following solutions contain the greatest total ion concentration? a) one mole of potassium chloride dissolved in 1.0L of solution b)one mole of sodium phosphate dissolved in 1.0L of solution c)one mole of ammonium carbonate dissolved in 1.0L of solution d) one ...
March 13, 2011 by Jon

CHEMISTRY
Which of the following solutions contain the greatest total ion concentration? a) one mole of potassium chloride dissolved in 1.0L of solution b)one mole of sodium phosphate dissolved in 1.0L of solution c)one mole of ammonium carbonate dissolved in 1.0L of solution d) one ...
March 13, 2011 by Jon

Chemistry
Cynthia combines 1.7 grams of Silver hydroxide with 234 ml of a 1.2 M solution of HBr. Assume all the silver hydroxide dissolves once it is in solution(which is technically not the case, but for this example, just go with the flow of it). What will be the final pH of the ...
September 25, 2016 by Kane

chemistry
The ΔH for the solution process when solid sodium hydroxide dissolves in water is 44.4 kJ/mol. When a 13.9 g sample of NaOH dissolves in 250.0 g of water in a coffee-cup calorimeter, the temperature increases from 23.0°C to ________°C. Assume that the solution has the ...
March 21, 2011 by Kamila

chemistry
1L of a buffer composed of NaHC2O4 and Na2C2O4 has a pHof 4.0 and a total molarity of 1. a). what would the effect on the pH be of adding 1 gram of sodium hydrogen oxalate to this buffer? b). what would be the effect on the pH of adding 1 gram of sodium oxalate to the original...
March 10, 2013 by Ashley

chemistry
how many grams of copper hydroxide can b prepared from 2.7g of copper (II) nitrate and excess sodium hydroxide?
March 23, 2010 by sophie

chemistry
how many grams of copper hydroxide can b prepared from 2.7g of copper (II) nitrate and excess sodium hydroxide?
March 23, 2010 by sophie

Chemistry (reaction with amine)
Phenol dissolved into sodium hydroxide solution to give another solution A. What would be formed when A reacted with phenylamine/nitrous acid mixture , butylamine/nitrous acid mixture and ammonia/ nitrous acid respectively ? The resulting solution were brown , red and ...
December 6, 2008 by initial D

chemistry
If you are given a .26g piece of sodium metal to react compltetely with water, how many moles of HCl would it take to neutralize the sodium hydroxide produced?
November 17, 2009 by Jmhitt

Chemistry
Can someone please help me figure out whether aqueous sodium sulfite is acidic or basic? I know it is a salt produced from sodium hydroxide and sulfur dioxide.
March 11, 2015 by Anonymous

Science-Chemistry
Calculate the number of grams of carbon dioxide that can be absorbed by a complete reaction with a solution that contains 5.00 grams of sodium hydroxide
December 2, 2010 by Kelsey

chemistry
what is the nickel ion concentration in a solution prepared by mixing 337ml of 0.430M nickel nitrate with 387ml of 0.251M sodium hydroxide?
December 4, 2012 by sa

chemistry
How many ml of molar sulfuric acid is to be added to 50.0 ml of 0.250 molar sodium hydroxide solution to neutralize it completely . cannot post reaction sorry ..
March 31, 2015 by laura

Science
How much mL of dilute nitric acid is needed to add in control solution in chloride limit test in sodium hydroxide sample???can u please give me Answer urgently??
September 9, 2016 by Palakpatel

chemistry
The enthalpy change for the solution process when solid sodium hydroxide dissolves in water is -44.4 kJ/mol. When a 13.6 g sample of NaOH dissolves in 250.0 g of water in a coffee-cup calorimeter, the temperature increases from 23.0 o C to __________ o C. Assume that the ...
November 15, 2010 by Anonymous

For each of the reactions below give a balanced equation. 1)Methane (CH4) with chlorine to give chloroform (CHCL3)and hydrogen cloride. 2) Sodium Hydroxide with phosphoric acid. 3)sodium carbonate with sulfuric acid. 4) sodium sulfide with hydrochloric acid.
March 26, 2012 by Kimberly

Chemistry- Drbob-help#3
I still need help with #3 I'm not sure how I got 1.14M. I have tried to do the problem over, but I not coming up with my original answer of 1.14M. Somehow I am missing a step. Please show work for the 1.14M Thanks Question#9 reads exactly as written. A student makes a solution...
February 10, 2011 by Paul

Chemistry
If aqueous hydrofluoric acid is reacted with sodium hydroxide, which of the following substances are in the net ionic equation? 1. fluoride ion, hydronium ion, and water 2. fluoride ion, hydroxide ion, hydronium ion, and water 3. hydrofluoric acid, sodium ion, hydroxide ion, ...
October 16, 2010 by Elva

Chemistry
solid sodium reacts violently with water, producing heat, hydrogen gas, and sodium hydroxide. how many molecules of hydrogen gas are formed when 48.7 g of sodium are added to water? 2Na + 2H2O ------> 2NaOH + H2
January 10, 2013 by Bob

Chemistry
Solid sodium reacts violently with water, producing Heath hydrogen gas, and sodium hydroxide ( 2Na + 2H2O --> 2NaOH + 2H2 ). How many molecules of hydrogen gas are formed when 67.2 g of sodium are added to water?
December 11, 2011 by Help!

Chemistry
in this experiment you are you will begin by preparing a dilute soultion of sodium hydroxide by taking 50 ml of 3 M NaOh stock solution and diluting it with 250 ml of water. i found that and the answer was .5 but how do i do this b. calculate the number of moles and grams of ...
February 23, 2010 by Chris

chemistry
How many moles of excess reactant are present when 3.50 x 10^2 mL of 0.216 M sulfuric acid reacts with 0.510 L of 0.202 M sodium hydroxide to form water and aqueous sodium sulfate?
September 19, 2009 by larry