# A sample of a gas (5.0 mol) at 1.0 atm is expanded at constant temperature from 10 L to 15 L. The final pressure is __________ atm.

57,442 results

**chemistry**

A gas sample contained in a cylinder equipped with a moveable piston occupied 300.0 mL at a pressure of 2.00 atm. What would be the final pressure if the volume were increased to 500.0 mL at constant temperature? Answer should include units.

**physics**

2 moles of an ideal gas at 20k changes from a pressure of 15 atm to 3 atm at constant temperature. Calculate the work done by the gas.

**chemistry 116**

You have a rigid sealed container held at a constant temperature. You add 3.3 atm of oxygen gas, 1.7 atm of nitrogen and 4.2 atm of methane to it. What is the partial pressure of the oxygen gas in the container

**chemistry**

Which substances in each of the following pairs would have the greater entropy? Explain. (a) at 75°C and 1 atm: 1 mol H2O(l) or 1 mol H2O(g) (b) at 5°C and 1 atm: 50.0 g Fe(s) or 0.80 mol Fe(s) (c) 1 mol Br2(l,1 atm, 8°C) or 1 mol Br2(s, 1 atm, -8°C) (d) 0.312 mol SO2 (g, ...

**Chemistry**

Consider the cracking of gaseous ammonia at constant total pressure of 1 atm and constant temperature. Find the equilibrium gas composition at 400 degree C. Given: The Gibbs free energy for the cracking reaction 2NH3 = N2 + 3H2, DeltaGo ( delta G standard) =87,030-25.8TlnT –...

**Chemistry**

50 Ltr. Of a certain liquid is confined in a piston system at the extenal pressure 100 atm this pressure suddenly released and liquid is expanded against a contant atm pressure , vol. Of liquid increases by 1 Ltr and the final pressure of the liquid is 10 atm. Find the work done.

**Chemistry**

The volume of a gas with a pressure of 1.2 atm increases from 1.0 L to 4.0 L. What is the final pressure of the gas, assuming constant temperature?

**Chemistry**

A 7.30-L container holds a mixture of two gases at 45 °C. The partial pressures of gas A and gas B, respectively, are 0.342 atm and 0.527 atm. If 0.250 mol a third gas is added with no change in volume or temperature, what will the total pressure become?

**chemistry**

A 8.90-L container holds a mixture of two gases at 45 C. The partial pressures of gas A and gas B, respectively, are .294 atm and .860 atm. If .100 mol of a third gas is added with no change in volume or temperature, what will the total pressure become?

**Chemistry**

A 9.00-L container holds a mixture of two gases at 43 °C. The partial pressures of gas A and gas B, respectively, are 0.257 atm and 0.579 atm. If 0.110 mol a third gas is added with no change in volume or temperature, what will the total pressure become?

**chem**

A 9.80-L container holds a mixture of two gases at 39 °C. The partial pressures of gas A and gas B, respectively, are 0.426 atm and 0.832 atm. If 0.250 mol a third gas is added with no change in volume or temperature, what will the total pressure become?

**chem**

8.10-L container holds a mixture of two gases at 45 °C. The partial pressures of gas A and gas B, respectively, are 0.153 atm and 0.882 atm. If 0.110 mol a third gas is added with no change in volume or temperature, what will the total pressure become?

**chemistry**

A 8.75-L container holds a mixture of two gases at 23 °C. The partial pressures of gas A and gas B, respectively, are 0.317 atm and 0.755 atm. If 0.100 mol of a third gas is added with no change in volume or temperature, what will the total pressure become?

**Chemistry**

A 8.25-L container holds a mixture of two gases at 39 °C. The partial pressures of gas A and gas B, respectively, are 0.186 atm and 0.884 atm. If 0.120 mol of a third gas is added with no change in volume or temperature, what will the total pressure become?

**chemistry**

A 7.30-L container holds a mixture of two gases at 45 °C. The partial pressures of gas A and gas B, respectively, are 0.410 atm and 0.620 atm. If 0.150 mol of a third gas is added with no change in volume or temperature, what will the total pressure become?

**chem**

A 2.9 L sample of gas has a pressure of 5 atm and a temperature of 50 °C. What will be the new temperature in Kelvin if the volume is decreased to 2.4 L and the pressure decreased to 3 atm? Round to the nearest whole number. Don't forget the units.

**chemistry**

a 0.25 mol sample af neon gas at 18 C and 0.700 atm is heated to 40 C. the new gas pressure is 1.11 atm. what is the change in volumn of the neon gas?

**chemistry**

An ideal gas is allowed to expand isothermally from 2.00 L at 5.00 atm in two steps: a) against a constant external pressure of 3.00 atm, followed by b) against a constant external pressure of 2.00 atm. Calculate q and w. (101.33 J = 1 L atm)

**Intro to Chemistry**

A 9.40-L container holds a mixture of two gases at 47 °C. The partial pressures of gas A and gas B, respectively, are 0.344 atm and 0.520 atm. If 0.160 mol of a third gas is added with no change in volume or temperature, what will the total pressure become?

**ap chemistry**

A sample of gas in a cylinder of volume 4.2 L at 316 K and 2.68 atm expands to 7.21 L by two different pathways. Path A is an isothermal, reversible expansion. Calculate the work for Path A. Answer in units of J Path B has two steps. In the first step, the gas is cooled at ...

**physics**

Two moles of neon gas at 25oC and 2.0 atm is expanded to 3 times the original volume while the pressure is reduced to 1.0 atm. Find the end temperature. A. 447degreesC B. 174 degreesC C. -66 degrees C D. 38degreesC E. 150degreesC

**chemistry**

A container holds 1.00 mol O2, and the pressure in the container is 2.00 atm. A student adds 60.0 g of gas Y to the container. The total pressure (of O2 and gas Y) is 3.00 atm. What is the molar mass of gas Y? (V and T constant)

**Maths**

One tenth kilogram of Argon is contained in a piston-cylinder assembly. Initially at 4900 K and a volume of 40 liters, the gas undergoes an isobaric process during which the heat input is 30 kJ. Where / how do i start to determine the boundary work and final temperature 100 kg...

**chemistry**

4. A container of gas has a volume of 3.5 L and a pressure of 0.8 atm. Assuming the temperature remains constant, what volume of gas would result if the pressure was 0.5 atm? A. 1.8 L B. 5.6 L C. 0.2 L D. 2.2 L My guess is B but I just want to double check

**chemistry**

A 1.04-L sample of gas at 759 mmHg pressure is expanded until its volumes is 2.24 L. What is the pressure in the expanded gas sample (at constant temperature)?

**Chem II**

A sample of gas in a 25.0-L containter exerts a pressure of 3.20 atm. Calculate the pressure exerted by the gas if the volume is changed to 45.0-L at constant temperature.

**chemistry**

an ideal gas in a closed inflexible container has a pressure of 6 atm and a temperature of 27 degree celsius . What will be the new pressure of the gas of temperature is decreased to -73 degree celsius? a) 2 atm b) 3 atm c) 4atm d) 8atm e) 9atm plz teach me the method also

**chemistry**

an ideal gas in a closed inflexible container has a pressure of 6 atm and a temperature of 27 degree celsius . What will be the new pressure of the gas of temperature is decreased to -73 degree celsius? a) 2 atm b) 3 atm c) 4atm d) 8atm e) 9atm plz teach me the method also

**Chemistry**

if the pressure on a 1.00 L sample of gas is increased from 760. mm Hg to 2.00 atm at constant temperature what will the volume of the gas sample

**physics**

Fifty liters of gas is kept at a temperature of 200 K and under pressure of 15 atm. The temperature of the gas is increased to 400 K. The pressure is decreased to 7.5 atm. What is the resulting volume of the gas?

**Physics**

A 1.45 mol sample of an ideal gas (γ = 1.40) is carried through the Carnot cycle described in the figure below. At point A, the pressure is 28.5 atm and the temperature is 600 K. At point C, the pressure is 1.00 atm and the temperature is 400 K. How do I get the pressure ...

**chemistry 106**

Calculate the work done if a gas is compressed from 8.3 L to 3.3 L at constant temperature by a constant pressure of 3.0 atm, and give your answer in units of joules. (1 L · atm = 101.3 J)

**chemistry**

A 24L sample of a gas at fixed mass and constant temperature exerts a pressure of 3.0 atm. What pressure will the gas exert if the volume is changed to 16L?

**Chemistry 101**

Are these correct? 1. A sample of gases contains three gases at the following pressures: 1.2 atm N2, 3.2 atm O2, and 0.56 atm Xe. What is the total pressure in the container? a. 5.0atm b. 1.4atm c. 2.2atm d. 1.0atm e. 1.7atm I am pretty sure it is A. Is that correct? 2. The ...

**Chemistry**

A sample of air was compressed to a volume of 18.0 L. The temperature was 290.0 K, and the pressure was 6.80 atm. How many moles of gas were in the sample? If the sample had been collected from air at P = 2.0 atm., what was the original volume of the gas (in liters)? How do I ...

**chemistry**

A 10.0-L stainless steel container was charged with 2.00 atm of hydrogen gas and 3.00 atm of oxygen gas. A spark ignited the mixture, producing water. What is the pressure in the tank at a constant temperature of 25°C?

**chemistry**

a 1.04 l sample of gas at 759 mm hg pressure is expanded until its volume is 2.24 l. what is the pressure in the expanded gas sample at constant temperature

**Chemistry**

A sample of argon has a pressure of 1.021 atm at a temperature of 89.4 degC. Assuming that the volume is constant, at what temperature will the gas have a pressure of 1016.56 mmHg

**Chemistry**

A sample of argon has a pressure of 1.021 atm at a temperature of 89.4 degC. Assuming that the volume is constant, at what temperature will the gas have a pressure of 1016.56 mmHg

**chemistry**

A certain amount of chlorine gas was placed inside a cylinder with a movable piston at one end. The initial volume was 3.00 L and the initial pressure of chlorine was 1.15 atm . The piston was pushed down to change the volume to 1.00 L. Calculate the final pressure of the gas ...

**chemistry**

A mixture og gases has a total pressure off 28.3 atm, it is made of: 5.8 atm of hydrogen gas, 7.2 atm of nitrogen gas, 3.5 atm of oxygen gas and some amount of methane. What is the pressure of methane? what is the pressure of methane in kPa?

**Chem**

Hello! A 22.0 L cylinder containing helium gas at a pressure of 28.1 atm is used to fill a weather balloon in order to lift equipment into the stratosphere. What is the final pressure (in atm) in the cylinder after a 101 L balloon is filled to a pressure of 1.23 atm. I found ...

**chemistry**

A sample of only solid ammonium chloride was heated in a 1 L container at 500 C. At equilibrium, the pressure of NH3 (g) was found to be 1.75 atm. what is the equilibrium constant, Kc, for the decomposition at this temperature? R= .08206 L atm/K Mol NH4CL (s) <---> NH3(g...

**Chemistry**

A XX-g sample of methane, CH4, is mixed with YY atm of O2 (an excess) in a VV L combustion chamber at 125.0°C. The combustion reaction to CO2 and H2O is initiated and the vessel is cooled back to 125.0°C. What is the final pressure in the combustion chamber assuming the ...

**chemistry**

calculate the Henry's law proportionality constant for N2? partial pressure at 1 atm=0.78 atm solubility at 1 atm= 5.3 x 10^-3 mol/L

**chemistry**

calculate the Henry's law proportionality constant for N2? partial pressure at 1 atm=0.78 atm solubility at 1 atm= 5.3 x 10^-3 mol/L

**Chemistry**

A sample of air occupies 3.8 L when the pressure is 1.2 atm. (a) What volume does it occupy at 7.3 atm? (b) What pressure is required in order to compress it to 0.050 L? (The temperature is kept constant.) I already know the answers to each question, but do not understand how ...

**Thermochemistry**

Path A A sample of gas in a cylinder of volume 3.96 L at 327 K and 3.28 atm expands to 7.34 L by two different pathways. Path A is an isothermal, reversible expansion. Calculate the work for Path A. Answer in units of J. Path B Path B has two steps. In the first step, the gas ...

**Chemistry**

Use Henry's law and the solubilities given below to calculate the total volume of nitrogen and oxygen gas that should bubble out of 1.6 L of water upon warming from 25 C to 50 C. Assume that the water is initially saturated with nitrogen and oxygen gas at 25 C and a total ...

**chemistry**

An oxygen gas with a volume of 50 mL at a pressure of 1.5 atm . This gas is compressed up to 35 mL volume at constant temperature . Determine the final gas pressure .

**chemistry**

An oxygen gas with a volume of 50 mL at a pressure of 1.5 atm . This gas is compressed up to 35 mL volume at constant temperature . Determine the final gas pressure

**Chemistry**

150.0 mL flask contains 740. g of N2 at 0°C. What is the pressure in atm. What is the pressure in torr? What is the pressure in psi? I know you have to do: n = grams/molar mass Then PV = nRT R in 0.08206 L.atm/mol.K gives P in atm atm x 760 = p in torr 1 atm = 14.7 psi

**Chemistry**

A sample of oxygen that occupies 1.00 x 10^6 mL at 575 mm Hg is subjected to a pressure of 1.20 atm. What will the final volume of the sample be if the temperature is held constant?

**Chemistry;HELP**

1. A sample of gas under a pressure of 622 kPa has a volume of 233 cm3. The pressure is increased to 988 kPa, while the temperature remains constant. What volume will the gas occupy at this pressure? 2. The pressure exerted by a gas is 2.0 atm while it has a volume of 350 cm3...

**CHEMISTRY!! D:**

1. A sample of gas under a pressure of 622 kPa has a volume of 233 cm3. The pressure is increased to 988 kPa, while the temperature remains constant. What volume will the gas occupy at this pressure? 2. The pressure exerted by a gas is 2.0 atm while it has a volume of 350 cm3...

**Chemistry**

An empty aerosol-spray can at room temperature (20 ◦C) is thrown into an incinerator where the temperature reaches 458◦C. If the gas inside the empty container was initially at a pressure of 1 atm, what pressure did it reach inside the incinerator? Assume the gas was at ...

**Chemistry**

15.0 moles of gas are in a 6.00L tank at 298.15K. Calculate the difference in pressure between methane and an ideal gas under these conditions. The van der Waals constants for methane are a=2.300 L^2*atm/mol^2 and b=0.0430 L/mol. I found the idea gas pressure to be 61.2 atm by...

**chem plz help :(**

A sample of helium gas occupies a 10 cubic meter container at STP (273 K, 1 atm). What will the approximate volume become when the pressure is 1.5 atm and the temperature is 32 oC?

**CHEMISTRY**

NEED HELP (Combined gas Law) A gas at a pressure of 1.50 atm has a volume of 200 mL. Calculate the new volume if the pressue changes to 1.20 atm. Assume constant temperature.

**chem**

A 75.0 L stainless steel container was charged with 3.00 atm of hydrogen gas and 4.00 atm of oxygen gas. A spark ignited the mixture, producing water. What is the pressure in the tank at 25°C? in atm What is the pressure in the tank at 125°C? in atm

**chemistry**

A sample of oxygen that occupies 1.00x10^6 mL at 575 mm Hg is subjected to a pressure of 1.36 atm. What will the final volume of the sample be if the temperature is held constant?

**Chem**

Consider 1.40 mol of carbon monoxide and 3.20 mol of chlorine sealed in a 8.00 L container at 476 oC. The equilibrium constant, Kc, is 2.50 (in M-1) for CO(g) + Cl2(g) ↔ COCl2(g) Calculate the equilibrium molar concentration of CO. So I tried this question by finding the...

**chemistry**

Imagine that 25.0 of ice at -3.0C is placed in a container holding water vapor at temperature of 120.0C . After a certain amount of time, the container has expanded slightly, but holds only water vapor at 110.0C. what is the final volume of the container? you may assume the ...

**chemistry**

Imagine that 25.0 of ice at -3.0C is placed in a container holding water vapor at temperature of 120.0C . After a certain amount of time, the container has expanded slightly, but holds only water vapor at 110.0C. what is the final volume of the container? you may assume the ...

**chemistry**

dG for the formation of Hi(g) from its gaseous elements is -20.2 kj/mol at 500k. when the partial pressure of HI is 10 atm, and I2 0.001 atm, what must the partial pressure of hydrogen be at this temperature to reduce the magnitude of dG for the reaction to 0. H2(g)+I2(g)----&...

**thermodynamics**

dG for the formation of Hi(g) from its gaseous elements is -20.2 kj/mol at 500k. when the partial pressure of HI is 10 atm, and I2 0.001 atm, what must the partial pressure of hydrogen be at this temperature to reduce the magnitude of dG for the reaction to 0. H2(g)+I2(g)----&...

**Chemistry**

A 2.50 L flask was used to collect a 5.65 g sample of propane gas, C3H8. After the sample was collected, the gas pressure was found to be 741 mmHg. What was the temperature of the propane in the flask. P= 741 mmHg(1 atm/760 mmHg)= .975 atm V= 2.50 L n= 5.65 g C3H8 (1 mol/44 g...

**Chemistry**

Sulfur dioxide is used to make sulfuric acid. one method of producing it is by roasting mineral sulfides, for example, FeS2(s) + O2 (g) ---> SO2(g) + Fe2O3(s) (unbalanced). A production error leads to the sulfide being placed in a 950-L vessel with insufficient oxygen. ...

**chemistry dont know how to do it**

dG for the formation of Hi(g) from its gaseous elements is -20.2 kj/mol at 500k. when the partial pressure of HI is 10 atm, and I2 0.001 atm, what must the partial pressure of hydrogen be at this temperature to reduce the magnitude of dG for the reaction to 0. H2(g)+I2(g)----&...

**chemistry**

1)A sample of CO2 gas which weighs 0.85 grams has a volume of 1.30 liters when collected at 30°C. What would be the pressure of the gas sample? 2) A gas sample has an original volume of 600 ml when collected at 720 mm and 35°C. If a change is made in the gas temperature ...

**Chemistry**

A sample of gas with a volume of 14.9 liters at 2.6 atmospheres pressure and a temperature of 25°C is allowed to expand to a volume of 29.3 liters at a temperature of 15°C. What is the final pressure (atm)atof the gas?

**Chemistry**

Can someone help me with this question? Calculate the work for each of the following processes beginning with a gas sample in a piston assembly with T=305 K, P=1.79 atm, and V=4.29 (a) irreversible expensing against a constant external pressure of 1.00 atm to a final volume of...

**chem. Combined Gas laws**

A gas takes up a volume of 17 liters, has a pressure of 2.3 atm, and a temperature of 299K. If I raise the temperature to 350K and lower the pressure to 1.5 atm, what is the new volume of the gas? Use the combined gas law here. I will be happy to critique your work.

**chem/plz/check work studying for a final**

23. A 32.3 L sample of a gas at 305oC and 1.20 atm is to be cooled at constant pressure until its volume becomes 28.4L. What will be the new gas temperature? Tf = Vf*Ti/Vi Tf =28.4L x (305+273)K / 32.3L = (28.4)(578)K / 32.3 = 16415.2/32.3 Tf = 508K I got this one wrong on a ...

**Chemistry**

Calculate the partial pressures and total pressure (in atm) exerted by 0.838 mol of methane, 0.184 mol of ethane and 0.755 mol of neon contained in a 4.00 L container at 27 C. PV=nRT for methane (4.00L) X = (0.838 mol)(0.08206 L-atm/mol-K)(300.15 K) X = 5.160 atm PV=nRT for ...

**Chemistry**

A sample of krypton gas occupies 95.0 mL at 0.500 atm. If the temperature remained constant, what volume would the krypton occupy at (a) 5.00 atm, (b) 0.0500 atm, (c) 555 torr, (d) 5.00 torr, and (e) 5.5 3 1022 torr?

**chemistry**

Two moles of an ideal gas initially at 27C and 1 atm pressure are compressed isothermally and reversibly till the final pressure of the gas is 10 atm. Calculate the work done. (R=8.314 JK-1mol-1)

**chem**

A gas has pressure of 4.62 atm when its volume is 2.33 L if the temperature remains constant, what will the pressure be when the volume is changed to 1.03 L? express the final pressure in torrs

**Chem**

I don't believe I'm getting the correct answers for this problem. Could someone look over my work and verify whether it is correct or not? One mole of an ideal gas (Cv = 3/2R) at 300. K expands adiabatically against a constant external pressure of 2.00 atm from a volume of 1....

**Chemistry**

A sample of argon gas has a volume of 715 mL at a pressure of 1.34 atm and a temperature of 144 Celsius. What is the volume of the gas in milliliters when the pressure and temperature of the gas sample are changed to 622 mmHg and 321 K?

**Chemistry 105**

A sample of gas has an initial volume of 33.0 L at a pressure of 1.1 atm. If the sample is compressed to a volume of 10.0 L, what will its pressure be? (Assume constant temperature.)

**Chemistry**

A gas has a pressure of 4.62 atm when its volume is 2.33 L. If the temperature remains constant, what will the pressure be when the volume is changed to 1.03 L? Express the final pressure in mm Hg.

**HELP**

Calculate the change in energy when 665.0 g of CH3OH(g) completely reacts at a constant temperature of 300 K and constant pressure of 0.95 atm. R = 8.314 J/mol*K and R = 0.08206 atm*L/mol*K So i used the formula change in energy = change in H - nRT 90.7-51.9-38.8 its wrong i ...

**chemistry**

Determine the density of methane (CH4) in g/L at 24.7oC and 1.1 atm ideal gas eqn: P = (rho)RT, where: pressure: P = 1.1 atm specific gas constant: R, R = |R / M, where |R = 0.0821 L-atm / K-mol and, molecular weightCH4: M = 0.016 kg/mol R = 0.0821/0.016 = 5.13 and temp. T = ...

**Physics**

0.75 mol of argon gas is admitted to an evacuated 40 cm^{3} container at 40 C. The gas then undergoes an isochoric heating to a temperature of 500 C. Before I forgot to write the question...so the question is What is the final pressure of the gas? * physics - drwls, Friday, ...

**Chemistry (Check)**

If a gas in a closed container is pressurized from 12 atm to 25 atm and tis original temperature was 32 degrees C, what would the final temperature of the gas be? Tf = 635 K

**chemistry**

a sample of helium gas has a volume of 6.50L at a pressure of 845mm Hg and a temperature of 25 celcius.what is the pressure of the gas in atm when the volume and temperature of the gas sample are changed to the following: a. 1850 mL and 325K

**chemistry**

A sample of gas has an initial volume of 20.9 L at a pressure of 1.4 atm If the sample is compressed to a volume of 12.9 L: , what will its pressure be? (Assume constant temperature.) Thank you

**Physical Chemistry - please help!**

Question: 0.19 litre of an ideal monatomic gas (Cv,m = 3R/2) initially at 83 °C and 47 atm pressure undergo an expansion against a constant external pressure of 1.19 atm, and do 2.3 kJ of work. The final pressure of the gas is 1.19 atm. Calculate the change in enthalpy, Δ...

**Chem**

Can someone check these homework answers please? 32. The barometric pressure measured outside an airplane at 9 km was 259 mmHg. Calculate the pressure in kPa. 34.5 kPa 36. A diving bell is a container open at the bottom. As the bell descends, the water level inside changes so ...

**physics**

A rigid container holds hydrogen gas at a pressure of 3.0 atm and a temperature of 20 degrees Celsius. What will the pressure be if the temperature is lowered to -33 degrees Celsius? Please give your final answer in atm. Answer

**Physics**

A rigid tank contains 1.80 moles of an ideal gas. Determine the number of moles of gas that must be withdrawn from the tank to lower the pressure of the gas from 27.9 atm to 4.80 atm. Assume the volume of the tank and the temperature of the gas remain constant during this ...

**physics**

A rigid tank contains 1.80 moles of an ideal gas. Determine the number of moles of gas that must be withdrawn from the tank to lower the pressure of the gas from 21.6 atm to 5.80 atm. Assume the volume of the tank and the temperature of the gas remain constant during this ...

**Chemistry**

A pocket of gas is discovered in a deep drilling operation. The gas has a temperature of 480c and is at a pressure of 12.8 atm. What volume of gas is required to provide 18.0 L of gas at the surface where the conditions are 22 C and 1.00 atm?

**Chemistry**

An ideal gas originally at 0.8 atm and 77C was allowed to expand untel its final volume ,pressure and temperature were 600 ml ,0.4 atm and 27C.what was the initial volume

**Physics**

A rigid tank contains 1.20 moles of an ideal gas. Determine the number of moles of gas that must be withdrawn from the tank to lower the pressure of the gas from 28.5 atm to 5.30 atm. Assume the volume of the tank and the temperature of the gas remain constant during this ...

**chem help**

Initially a gas is at a pressure of 12 atm, a volume of 23 L, and a temperature of 200 K, and then the pressure is raised to 14 atm and the temperature to 300 K. What is the new volume of the gas? Round to the nearest tenth. Don't forget the units.

**chemistry**

A sample of oxygen that occupies 1.00x10^6 mL at 575 mm Hg is subjected to a pressure of 1.36 atm. What will the final volume of the sample be if the temperature is held constant? How would I set up this equation?

**chemisrty**

What is the total pressure of the gas produced in the burette if it contains nitrogen gas whose pressure is 1.5 atm, oxygen gas whose pressure is 1.6 atm and water vapour with a pressure of 1.3 atm.

**Physics**

The pressure gauge on a tank registers the gauge pressure, which is the difference between the interior and exterior pressure. When the tank is full of oxygen (O2), it contains 9.00 kg of the gas at a gauge pressure of 40.0 atm. Determine the mass of oxygen that has been ...