Saturday
January 31, 2015

Search: A person lifts a 4.9 kg cement block a vertical distance 0.9 m and then carries the block horizontally a distance 7.3 m. Determine the work done by the person and by the force of gravity in this process

Number of results: 30,120

Physics
A person lifts a 5.2 kg cement block a vertical distance 1.2 m and then carries the block horizontally a distance 7.3 m. Determine the work done by the person and by the force of gravity in this process.
January 9, 2012 by Mike

physics
A person lifts a 4.4 kg cement block a vertical distance of 1.30 m and then carries the block horizontally a distance of 13.50 m. (a) How much work is done by the person in the process?
November 9, 2011 by Anonymous

Khan
A person lifts a 4.3 kg cement block a vertical distance of 1.3 m and then carries the block horizontally a distance of 5.3 m. The acceleration of gravity is 9.81 m/s 2 . a) Determine the work done by the person in the process. Answer in units of J
November 15, 2011 by Hajib

physics problem that i neeeed help with!
A person lifts a 3.8 kg cement block a vertical distance 0.9 m and then carries the block horizontally a distance 7.3 m. Determine the work done by the person and by the force of gravity in this process. ? J (by person) ? J (by force of gravity)
April 15, 2010 by brittany

physics
A person lifts a 5.5 kg cement block a vertical distance 1.1 m and then carries the block horizontally a distance 7.3 m. Determine the work done by the person and by the force of gravity in this process. J (by person) J (by force of gravity)
January 3, 2011 by Anonymous

Begley
A person lifts a 4.1 kg cement block a vertical distance of 0.79 m and then carries the block horizontally a distance of 13.30 m. (a) How much work is done by the person in the process? (b) How much work is done by gravity in the process?
February 29, 2012 by Bryson

physics
A person lifts a 4.6 kg cement block a vertical distance of 1.43 m and then carries the block horizontally a distance of 10.50 m. (a) How much work is done by the person in the process? (b) How much work is done by gravity in the process?
January 26, 2013 by Jayde Larson

physics
a person lifts a 4.3 kg centimeter block a vertical distance of 1.10m. and then carries the block horizontally a distance of 10.0m. How much work is done by the person? How much work is done by gravity?
January 14, 2013 by Kalynn

physics
a person lifts a 4.3 kg centimeter block a vertical distance of 1.10m. and then carries the block horizontally a distance of 10.0m. How much work is done by the person? How much work is done by gravity?
January 14, 2013 by Kalynn

physics
two people push in opposite directions on a block that sits atop a frictionless surface. The soles of their shoes are glued to the surface. if the block originally at rest moves to the right a distance of d. Describe qualitatively how much work is done by the person on the ...
October 30, 2006 by joseph

physics
A small block has a horizontal velocity of 4.00 m/s as it slides off the edge of a table. The table is a vertical distance of 0.95 m above the floor. If g = 9.80 m/s2, how far does the block travel horizontally while it is in the air?
February 24, 2014 by sunny

physics
A 20 g bullet moving horizontally with a speed v hits a 2-kg block of wood resting on a table. After hitting the block the bullet is embedded in the block of wood and the block and the bullet moves a distance of 40 cm before it stops. If the coefficient of friction between the...
July 23, 2012 by Edward

Physics
A small block with a mass of m = 0.120 kg is attached to a cord passing through a hole in a frictionless, horizontal surface. The block is originally revolving at a distance of 0.40 m from the hole with a speed of 0.70 m/s. The cord is pulled from below, shortening the radius ...
May 20, 2014 by Sonya

physics
A 2.7 kg block, starting from rest, slides down a ramp with friction. The top of the ramp is 1.5 m above the ground; the bottom of the ramp is h = 0.25 m above the ground. The block leaves the ramp moving horizontally, and lands a horizontal distance d away. Find the distance ...
May 31, 2010 by amy

Physics
A block of mass 2.00kg starts at rest at the top of a ramp that is inclined delta= 40.0 degrees with the horizontal. The block slides down the ramp a distance of 3.60 meters where it contacts a relaxed spring with K=300N/m. If the coefficient of kinetic friction between the ...
October 19, 2011 by Daniel

physics
A physics student pulls a block of mass m = 23 kg up an incline at a slow constant velocity for a distance of d = 4 m. The incline makes an angle q = 25° with the horizontal. The coefficient of kinetic friction between the block and the inclined plane is µk = 0.3. a) What is ...
March 11, 2012 by Mel

Physics - Torque
Consider a rectangular block of mass 30kg, height= 3m, length = 2m. A force F is applied horizontally at the upper edge. The acceleration of gravity is 9.8 m/s^2. 1)What is the minimum force required to start to TIP the block? 2)What is the minimum coefficient of static ...
April 22, 2007 by Belle

Dynamics
The 10 kg block shown is released from rest on the horizontal surface at point B, where the spring has been stretched a distance of 0.5 m from its neutral position A. The coefficient of kinetic friction between the block and the plane is 0.30. Calculate (a) the velocity v of ...
March 24, 2013 by Brandon

Physics
A 1.10 kg} block of wood sits at the edge of a table, 0.790 m above the floor. A 1.10×10−2 kg} bullet moving horizontally with a speed of 725 m/s embeds itself within the block. What horizontal distance does the block cover before hitting the ground?
August 3, 2010 by Todd

physics
A 1.20- block of wood sits at the edge of a table, 0.720 above the floor. A 1.20×10−2- bullet moving horizontally with a speed of 750 embeds itself within the block. What horizontal distance does the block cover before hitting the ground?
October 26, 2011 by chris

Dynamic
The block of weight 50 N is pressed against the spring so as to compress it a distance 0.6 m when it is at A. If the plane is smooth, determine the distance d, measured from the wall, to where the block strikes the ground. Neglect the size of the block.
December 10, 2012 by Anonymous

PHYSICS(HELP)
A small block of mass m=1 kg glides down (without friction) a circular track of radius R=2 m, starting from rest at height R. At the bottom of the track it hits a massless relaxed spring with spring constant k= 11 N/m, which starts to be compressed as the block continues to ...
January 12, 2014 by Anonymous

phy
A constant force does 12.0 Joules of work pushing a 350 gram block a distance of 2.5 meters up a ramp. The block starts from rest and reaches a speed of 4.75 m/s after being pushed for 2.5 m. The block’s potential energy increases by 5.0 J as it travels this distance. (a) What...
June 9, 2012 by ihsan

PHYSICS(help)
A small block of mass m=1 kg glides down (without friction) a circular track of radius R=2 m, starting from rest at height R. At the bottom of the track it hits a massless relaxed spring with spring constant k= 11 N/m, which starts to be compressed as the block continues to ...
January 10, 2014 by Anonymous

Physics Classical Mechanics Help ASAP
A small block of mass m=1 kg glides down (without friction) a circular track of radius R=2 m, starting from rest at height R. At the bottom of the track it hits a massless relaxed spring with spring constant k= 8 N/m, which starts to be compressed as the block continues to ...
January 10, 2014 by Anonymous

Phisics (Urgent)!!!!!!!!!!!!!!!!!!!!!!
A small block of mass m=1 kg glides down (without friction) a circular track of radius R=2 m, starting from rest at height R. At the bottom of the track it hits a massless relaxed spring with spring constant k= 9 N/m, which starts to be compressed as the block continues to ...
January 12, 2014 by Anonimus

Physics
A 0.9-kg block (mass m) and a second block (mass M) are both initially at rest on a frictionless inclined plane. Mass M rests against a spring that has a force constant of 12.2 kN/m. The distance d along the plane between the two blocks is 3.64 m. The 0.9-kg block is released...
November 9, 2014 by Anonymous

Physics
A block of mass m = 2.00 kg rests on the left edge of a block of mass M = 8.00 kg. The coefficient of kinetic friction between the two blocks is 0.300, and the surface on which the 8.00- kg block rests is frictionless. A constant horizontal force of magnitude F = 10.0 N is ...
July 25, 2012 by Zac

Physics
A 10-g bullet is shot vertically into a stationary 8-kg block. The block lifts upward 3.0 mm. The bullet penetrates the block in a time of .001 seconds. Assume the force exerted on the block is constant. What is the impulse imparted on the block by the bullet?
November 30, 2011 by Zach

college physics
A block of weight = 35.0 N sits on a frictionless inclined plane, which makes an angle theta = 27.0 with respect to the horizontal. A force of magnitude = 15.9 N, applied parallel to the incline, is just sufficient to pull the block up the plane at constant speed. What is Wg, ...
February 25, 2010 by Anonymous

Physics
A block of weight = 25.0 N sits on a frictionless inclined plane, which makes an angle = 34.0 with respect to the horizontal, as shown in the figure. A force of magnitude F= 14.0 N, applied parallel to the incline, is just sufficient to pull the block up the plane at constant ...
October 17, 2010 by Eden

Physics
A small block slides along a track from one level to a higher level, by moving through an intermediate valley (see Figure). The track is frictionless until the block reaches the higher level. There a frictional force stops the block in a distance d. Assume that the block's ...
December 26, 2013 by George

physics
A 10.0-kg block is at rest on a horizontal floor. If you push horizontally on the 10.0-kg block with a force of 20.0 N, it just starts to move. (a) What is the coefficient of static friction? b) A 12.0-kg block is stacked on top of the 10.0-kg block. What is the magnitude F of...
February 17, 2011 by melad

physics
A 5.0-kg block is at rest on a horizontal floor. If you push horizontally on the 5.0-kg block with a force of 10.0 N, it just starts to move. (a) What is the coefficient of static friction? (b) A 12.0-kg block is stacked on top of the 5.0-kg block. What is the magnitude F of ...
February 16, 2012 by Julie

physics
A large uniform block rests horizontally on two vertical supports(one support at the left end of the block and another at a distance from the other end) and has a weight hanging from its other end. The block has a mass of 100 kg and a length of 2 meters. If the hanging weight ...
October 16, 2010 by sandhya

science
a bullet of mass0.01 kg and travelling with a speed of 500m/s strikes a block of mass 2 kg which is suspended by a string of length 5m. The center of gravity of the block is found to raise vertical distance of 0.1m. The speed of bullet after emerging from block is:
August 4, 2012 by kapindra

physics PLEASE help
A 5.0-kg block is at rest on a horizontal floor. If you push horizontally on the 5.0-kg block with a force of 10.0 N, it just starts to move. (a) What is the coefficient of static friction? (b) A 12.0-kg block is stacked on top of the 5.0-kg block. What is the magnitude F of ...
February 16, 2012 by Julie

Science
1) A block of mass 0.5 kg is placed at the highest point of a fixed smooth sphere of radius 0.5m. The block is gently pushed to one side. Calculate: 0 the 3 o (1) force exerted by the block on the sphere when it makes an angle with the vertical. (ii) At what angle does it ...
May 10, 2012 by Vikas

Physics
A 12.0 kg block sits on a frictionless table. On top of this block is placed a 5.00 kg block. The coefficient of static friction between the two blocks is 0.70. a) What is the maximum force that can be applied horizontally to the 5.00 kg block before it slips? b) What is the ...
July 25, 2012 by Zac

Physics
A 5.00 kg carrying a charge of Q=60 uC is connected to a spring for which k=100N/m. The block lies on a frictionless horizontal track and the system is immersed in a uniform electric field of E=5.0e5 V/m. If the block is released from rest when the spring is unstretched. A) By...
March 28, 2012 by Jona F

Physics
A 5.00 kg carrying a charge of Q=60 uC is connected to a spring for which k=100N/m. The block lies on a frictionless horizontal track and the system is immersed in a uniform electric field of E=5.0e5 V/m. If the block is released from rest when the spring is unstretched. A) By...
March 28, 2012 by Jona F

physics
In the figure, a 4.3 kg block is accelerated from rest by a compressed spring of spring constant 660 N/m. The block leaves the spring at the spring's relaxed length and then travels over a horizontal floor with a coefficient of kinetic friction μk = 0.260. The frictional ...
November 15, 2014 by brian

intro to physics
In the figure, a block of mass m = 3.20 kg slides from rest a distance d down a frictionless incline at angle θ = 30.0° where it runs into a spring of spring constant 431 N/m. When the block momentarily stops, it has compressed the spring by 19.5 cm. (a) What is the ...
December 14, 2011 by Anonymous

Physics
You observe someone pulling a block of mass 48 kg across a low-friction surface. While they pull a distance of 3.0 m in the direction of motion, the speed of the block changes from 4.9 m/s to 7.7 m/s. Calculate the magnitude of the force exerted by the person on the block. ...
April 14, 2011 by Amelie

classical mechanics
Gliding mass stopped by spring and friction (12 points possible) A small block of mass m=1 kg glides down (without friction) a circular track of radius R=2 m, starting from rest at height R. At the bottom of the track it hits a massless relaxed spring with spring constant k= 7...
January 10, 2014 by juanpro

physics
A block of weight w = 25.0 N sits on a frictionless inclined plane, which makes an angle = 25.0 with respect to the horizontal, as shown in the figure. A force of magnitude F= 10.6 N , applied parallel to the incline, is just sufficient to pull the block up the plane at ...
October 3, 2010 by michelle

Physics
A 5.0-g bullet traveling horizontally at an unknown speed hits and embeds itself in a 0.195-kg block resting on a frictionless table. The block slides into and compresses a 180-N/m spring a distance of 0.15m before stopping the block and bullet. Determine the initial speed of ...
March 11, 2014 by BULTURP

physics
A block of mass 2.5 kg is pushed up against the vertical wall by a force of 60 N acting at 47◦ to the ceiling. The coefficient of kinetic friction between the block and the wall is 0.67. The acceleration of gravity is 9.8 m/s2 . Find the work done by this force in moving...
June 27, 2014 by Kaylee

physics
A 1.80-kg block slides down a frictionless ramp.The top of the ramp is h1 = 1.21 m above the ground; the bottom of the ramp is h2 = 0.256 m above the ground. The block leaves the ramp moving horizontally, and lands a horizontal distance $d$ away. Calculate the distance d.
March 5, 2014 by Ted

physics
A 1.9- block slides down a frictionless ramp, as shown in the figure. The top of the ramp is = 2.1 above the ground; the bottom of the ramp is = 0.40 above the ground. The block leaves the ramp moving horizontally, and lands a horizontal distance away. Find the distance .
July 1, 2010 by meera

physics
A 1.9 kg block slides down a frictionless ramp, as shown in figure 8-28. The top of the ramp is 1.5 m above the ground; the bottom of the ramp is .25 m above the ground. The block leaves the ramp moving horizontally, and lands a horizontal distance d away. Find the distance d.
October 20, 2010 by tony

physics
You observe someone pulling a block of mass 48 kg across a low-friction surface. While they pull a distance of 3.0 m in the direction of motion, the speed of the block changes from 4.9 m/s to 7.7 m/s. Calculate the magnitude of the force exerted by the person on the block. ...
April 14, 2011 by Amelie

General Physics
A block sliding on a horizontal surface has an initial speed of 0.5 m/s. The block travels a distance of 1 m as it slows to a stop. What distance would the block have traveled if its initial speed had been 1 m/s? 1. 2 m 2. 1 m 3. more information is needed to answer the ...
July 26, 2013 by Charles

physics
A 50-kg block is pushed a distance of 5.0 m across a floor by a horizontal force Fp whose magnitude is 150 N. Fp is parallel to the displacement of the block. The coefficient of kinetic friction is 0.25. A) What is the total work done on the block? B) If the box started from ...
February 13, 2012 by Amy

Physics
A block of mass m is projected at speed Vo up a rough plane inclined at an angle theta to the horizontal. Model the block as a particle and assume that the frictional force acting is given by kv^2, where v is the block's speed and k is a constant. What is the block's equation ...
May 13, 2012 by Anonymous

Physics
A block of mass m is placed in a smooth-bored spring gun at the bottom of the incline so that it compresses the spring by an amount x_c. The spring has spring constant k. The incline makes an angle theta with the horizontal and the coefficient of kinetic friction between the ...
March 13, 2011 by Trevor

PHYSICS
A block of mass m = 3.20kg slides from rest a distance d down a frictionless incline at angle θ = 30.0° where it runs into a spring of spring constant 425 N/m. When the block momentarily stops, it has compressed the spring by 22.0 cm. (a) What is the distance d? I found ...
October 24, 2011 by Anonymous

physics
A block of mass m = 3.20kg slides from rest a distance d down a frictionless incline at angle θ = 30.0° where it runs into a spring of spring constant 425 N/m. When the block momentarily stops, it has compressed the spring by 22.0 cm. (a) What is the distance d? I found ...
October 24, 2011 by Anonymous

physical
A 0.8 kg block of wood has an initial velocity of 0.25 m/s as it begins to slide across a table. The block comes to rest over a distance of 0.72m. a) what is the average frictional force on the block? b)How much work is done on the block by friction? c)How much work is done on...
August 17, 2012 by sara

physics
If a person pushes on a block and it travels a distance of 6.0m before stopping. How far would the block travel if it were pushed with the same force, but on the moon(which has 1/6 of the earth's gravity).
November 19, 2014 by Alex

physics
A block of mass 0.22 kg can slide on a frictionless incline (Ř = 30ş) and is connected via a string to a vertical spring (k = 3.6 N/m). The system starts at rest with the spring at its natural length. (a) What is the maximum distance along the incline through which the block ...
October 7, 2011 by Jill

Physics 1
A 50.0-kg block and 100-kg block are connected by a string as in Figure P8.36. The pulley is frictionless and of negligible mass. The coefficient of kinetic friction between the 50-kg block and incline is 0.250. Determine the change in the kinetic energy of the 50-kg block as ...
October 20, 2011 by Anonymous

Physics (Algebra-based)
A block starts at rest and slides down a frictionless track except for a small rough area on a horizontal section of the track.It leaves the track horizontally, flies through the air, and subsequently strikes the ground. gravity= 9.81 m/s^2. height1=4.1m---- is initially ...
April 6, 2013 by Becky

physics
A 0.145 kg block is released from rest from the top of a 51.7◦ frictionless incline. When it has fallen a vertical distance of 1.3 m, a 0.00794 kg bullet is fired into the block along a path parallel to the slope of the incline, and momentarily brings the block to rest, ...
April 9, 2010 by Jen

Physics - Springs
a 10.0 g bullet is fired into a 1.0 kg block initially at rest on a rough surface and connected to a spring with k = 200 N/m. Immediately following the collision the block has a speed of 2.0 m/s. The coefficient of friction between the ground and the block is 0.10. a) If the ...
November 21, 2010 by Anonymous

Physics
A block has mass 800 g, whose is fasten to a spring with spring constant k is 70 N/m. The block is pulled a distance x = 15 cm from its equilibrium position at x = 0 on a frictionless surface and released from rest at t = 0. (a) What force does the spring exert on the block ...
December 18, 2011 by Dia

physics--urgent
A block of mass m = 3.20kg slides from rest a distance d down a frictionless incline at angle θ = 30.0° where it runs into a spring of spring constant 425 N/m. When the block momentarily stops, it has compressed the spring by 22.0 cm. (a) What is the distance d? I found ...
October 25, 2011 by Anonymous

physics
A block with a mass of 1.0kg is lifted up slowly from ground (0m) to height of 0.51m. block is slowly displaced horizontally by .10m. find total work done to displace block vertically and horizontally. Then find total work to lift block and move it horizontally.
February 16, 2014 by Ray

Physics
36.​A 50.0-kg block and 100-kg block are connected by a string. The pulley is frictionless and of negligible mass. The coefficient of kinetic friction between the 50-kg block and incline is 0.250. Determine the change in the kinetic energy of the 50-kg block as it moves ...
April 15, 2013 by Noor

Physics
A 4.00g bullet, traveling horizontally with a velocity of magnitude 410m/s , is fired into a wooden block with mass of 0.780kg , initially at rest on a level surface. The bullet passes through the block and emerges with its speed reduced to 220m/s . The block slides a distance...
October 15, 2014 by Stas

Physics
A person pushes with a horizontal force of 25 N 4kg block, initially at rest on a horizontal table, a distance of 3m. The coefficient of kinetic friction between the block and table is 0.35. determine external work on the block-table system. the energy dissipated by friction ...
April 16, 2014 by Star

physics
A block is initially sliding along a horizontal surface with 24.6 J of kinetic energy. Friction causes the block’s speed to be halved in a distance of 3.20 m. a) What is the kinetic energy of the block after traveling the 3.20 m? b) What is the magnitude of the kinetic ...
July 16, 2012 by Katie

science
A block of mass 0.5 kg is pushed a distance x against a spring with k=450 N/m. When released the block slides along a frictionless horizontal surface to a point B, the bottom of a vertical circular track of radius R=1 meter. The track is not smooth. When the block reaches ...
June 18, 2011 by claire

physics
A block of mass m is held against a spring of spring constant k which is compressed a distance Ax. On the shaded region (d = 2 m), there is a coefficient of kinetic friction = 0.3 microcontroller, which then applies the rest of the course takes place without friction. The loop...
November 17, 2011 by sarah

physics
A bullet of mass m=10 g is fired with initial speed vi = 400 m/s into a block of mass M=2 kg initially at rest at the edge of a frictionless table of height h=1 m as shown in the figure. The bullet remains in the block, and after the impact the block lands a distance d from ...
January 14, 2013 by tami

physics
a block of mass 0,5kg is attached to a spring .The spring is compressed to a distance of0,1m.The block is released .The block moves 0,07m past the equilibrium position .What is the force of friction that does work on the block. spring constant is 500
August 29, 2014 by ruby

Physics - URGENT
A small block of mass 5 kg initially rests on a track at the bottom of a circular, vertical loop-the-loop, which has a radius of 0.8 m. The surface contact between the block and the loop is frictionless. A bullet of mass 0.7 kg strikes the block horizontally with initial speed...
January 15, 2009 by Richard

Physics Mechanics
A 2.30 kg block is acted upon by a horizontal force F(x) = 30.0 - 10.0x where the force is measured in Newtons if x is measured in meters. The coefficient of kinetic friction between the block and the flat surface is 0.170. The block is initially at x = 0 m. What distance must...
October 23, 2014 by Aya Serghosian

PHYSICS
In a laboratory experiment, a bullet of mass 47.0 g is shot horizontally into a stationary block of totara of mass 3.50 kg that hangs from a light string. The bullet is then embedded a distance d = 3.50 cm into the block and the combined block-bullet object moves at a speed of...
March 28, 2011 by Gary

Physics
A 40 gram bullet is fired horizontally from a gun with a momentum of 2.8 (kg*m/s) and embeds itself into a 300 gram block of wood initially at rest on a wooden horizontal surface. After this collision the wood block slides 15 meters before falling off a table with a height of ...
January 16, 2013 by Cass

physics
A 40 gram bullet is fired horizontally from a gun with a momentum of 2.8 (kg*m/s) and embeds itself into a 300 gram block of wood initially at rest on a wooden horizontal surface. After this collision the wood block slides 15 meters before falling off a table with a height of ...
January 16, 2013 by Cass

physicssssss
A block with mass m = 14 kg rests on a frictionless table and is accelerated by a spring with spring constant k = 4545 N/m after being compressed a distance x1 = 0.515 m from the spring’s unstretched length. The floor is frictionless except for a rough patch a distance d = 2.8...
October 8, 2011 by aaa

physics
A block with mass m = 14 kg rests on a frictionless table and is accelerated by a spring with spring constant k = 4545 N/m after being compressed a distance x1 = 0.515 m from the spring’s unstretched length. The floor is frictionless except for a rough patch a distance d = 2....
October 11, 2011 by a

Physics
A block hangs in equilibrium from a vertical spring. When a second identical block is added, the original block sags by 5.00 cm. What is the oscillation frequency of the two block system?
January 11, 2011 by Tara

physics
A block slides a distance d down a frictionless plane and then comes to a stop after sliding a distance s across a rough horizontal plane. What fraction of the distance s does the block slide before its speed is reduced to one-third of the maximum speed it had at the bottom of...
February 22, 2011 by andrea

Physics
Block A of mass 4.0 kg is on a horizontal, frictionless tabletop and is placed against a spring of negligible mass and spring constant 650 N m. The other end of the spring is attached to a wall. The block is pushed toward the wall until the spring has been compressed a ...
September 19, 2010 by Joe

physics
A block starts at rest and slides down a fric- tionless track. It leaves the track horizontally, flies through the air, and subsequently strikes the ground. What horizontal distance does the block travel in the air? Answer in units of m. What is the speed of the block when it ...
January 15, 2010 by Anonymous

Physics 1
A horizontal force of 30 N pulls a block of mass 2.5 kg across a level floor. The coefficient of kinetic friction between the block and the floor is μK = 0.25. If the block begins with a speed of 2.0 m/s and is pulled for a distance of 18 m, what is the final speed of the...
October 8, 2012 by John

Repost-Physics 1
A horizontal force of 30 N pulls a block of mass 2.5 kg across a level floor. The coefficient of kinetic friction between the block and the floor is ěK = 0.25. If the block begins with a speed of 2.0 m/s and is pulled for a distance of 18 m, what is the final speed of the ...
October 9, 2012 by John

Physics
A spring of k=11 N/m has a block of mass 4 kg attached to it on a frictionless table. If the block is pulled a distance 0.15 m to the right and released from rest, how long will it take the block to return to its equilibrium position?
April 28, 2008 by Charlie

physics
a 3.5 kg block is accelerated from rest by a compressed spring of spring constant 640 N/m. The block leaves the spring at the springs relaxation length.The block then travels over a horizontal floor with coefficient of kinetic friction 0.25. The friction force stops the block...
November 23, 2010 by help

physics
A small block is released from rest at the top of a frictionless incline. The distance from the top of the incline to the bottom, measured along the incline, is 3.60 m. The vertical distance from the top of the incline to the bottom is 1.36 m. If g = 9.80 m/s2, what is the ...
January 29, 2014 by Tara

PHYSICS
A 10 g bullet is fired horizontally into a 1 kg block of wood hanging from a 1 m long string attached to the ceiling, getting stuck in the block. Due to the impact, the block then swings on the string to a maximum angle of 60 degrees with respect to the vertical. How fast was ...
March 21, 2013 by Anonymous

Physics
a hand exerts a constant horizontal force on a block that is free to slide on a frictionles surface. the block starts from rest at point A and by the time it has traveled a distance d to point B it is traveling with speed Vb. WHen the block has traveled another distance d to ...
November 5, 2008 by Steve

physics
A block of mass 1.4kg is placed on a rough surface. the coefficient of friction between the surfaces is 0.58. A constance force of magnitude 10N, making an angle of 37 degrees with the horizontal is acting on the block. the block is given an initial velocity of 14 m/s towards ...
September 10, 2011 by usha

Physics help pleaseeee
A horizontal spring with a spring constant of 200.0 N/m is compressed 25.0 cm and used to launch a 3.00 kg block across a frictionless surface. After the block travels some distance, the block goes up a 32 degree incline that has a coefficient of friction of 0.25 between the ...
November 16, 2011 by Me

Physics Help Please
A horizontal spring with a spring constant of 200.0 N/m is compressed 25.0 cm and used to launch a 3.00 kg block across a frictionless surface. After the block travels some distance, the block goes up a 32 degree incline that has a coefficient of friction of 0.25 between the ...
November 17, 2011 by Anonymous

physics
A block of mass 0.570 kg is pushed against a horizontal spring of negligible mass until the spring is compressed a distance x. The force constant of the spring is 450 N/m. When it is released, the block travels along a frictionless, horizontal surface to point B, the bottom of...
March 2, 2009 by Jessi

Physics
A 20.0 kg crate is pushed across a rough floor for a distance of 90.0 cm. When the force pushing the block is equal to 80.0 N and applied at an angle of 18.0 below horizontal to the block, the block moves at a constant speed of 2.10 m/s.
October 15, 2010 by Diana

PHYSICS
A 2kg block is on a level table and held against a spring with k =150N/m which has been compressed 15 cm. he block is released from rest and pushed across the table. When the block leaves the spring it beins to experience fricion with coeficient of 0.25. What is the total ...
April 17, 2013 by Robin

Pages: 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | Next>>

Members