Monday
April 27, 2015

Search: A force of 5.0 is required to stretch a certain spring by 1.2 .How far must this spring be stretched for its potential energy to be 0.015 ?

Number of results: 59,780

physics
a 3000 pound car is parked on a hill at an angle of elevation of 16 degrees. how much force must the brakes exert to keep the car from rolling down the hill?
February 27, 2013 by bob

bioelectricity
Let Pk, Pna and Pcl be permeabilities of squid axon membrane for potassium, sodium and chloride, respectively. During the rest, the ratios of permeabilities are given by Pk:Pna:Pcl = 1.0 : 0.043 : 0.44 During the peak of an action potential these ratios become Pk:Pna:Pcl = 1.0...
February 19, 2013 by B

Trig
The state highway commission has decided to build a bridge over a dangerous railroad crossing. The approach ramp has to be constructed so that the bridge is 10 meters above the track. If the maximum desired grade of this ramp is 4 degrees, how far back from the edge of the ...
October 24, 2009 by Anonymous

chem
The heat of combustion of bituminous coal is 2.50 104 J/g. What quantity of the coal is required to produce the energy to convert 137.7 pounds of ice at 0.00C to steam at 100.C? specific heat (ice) = 2.10 J/gC specific heat (water) = 4.18 J/gC heat of fusion = 333 J/g ...
December 15, 2010 by Bogdanam

chemistry
"Newton's law tells us that Force= Mass x Acceleration. We also know that Energy = Force x Distance and Pressure= Force/Area. Using these relationships and table I-1 [I'll type it out], derive (do math stuff) the dimensions of newtons, joules, and pascals in terms of the ...
September 13, 2006 by Jenn

Physics
Deaths associated with lightning in South Africa are about four times higher than the global average. A typical thundercloud maybe at a potential of 1,2 times 10^8V and the thunder strike may result in a charge transfer of 20C. CALCULATE THE CURRENT GENERATED DURING THE ABOVE ...
October 11, 2010 by Orlando

physics
Suppose a charge of -2.30 C is at the origin and a charge of 2.90 C is at the point (0, 3.00) m. (a) Find the electric potential at (4.00, 0) m, assuming the electric potential is zero at infinity. (b) Find the work necessary to bring a 4.40 C charge from infinity to the ...
July 9, 2010 by alysse

physics
Driving home from school one day, you spot a ball rolling out into the street (see the figure ). You brake for 1.00 , slowing your 970- car from 16.0 to 9.50 . What was the magnitude of the average force exerted on your car during braking? How far did you travel while braking?
September 23, 2011 by Anonymous

Physics
A boat moves through the water with two forces acting on it. One is a 1500 N forward push by the motor, and the other is an 1400 N resistive force due to the water. (a) What is the acceleration of the 1100 kg boat? m/s 2 (b) If it starts from rest, how far will it move in 7.0 ...
October 7, 2011 by Savannah

Physics
A trunk of mass m = 1.100 kg is pushed a distance d = 32.0 cm up an incline with an angle of inclination theta = 26.0 by a constant horizontal force P = 150. N. The coefficient of kinetic friction between the trunk and the incline is 0.330. a) Calculate the work done on the ...
October 19, 2012 by Steeve

chemistry
Consider the hypothetical elements X and Y. Suppose the enthalpy of formation for the compound XY is {336 kJ/mol, the bond energy for X2 is 414 kJ/mol, and the bond energy for Y2 is 159 kJ/mol. Estimate the XY bond energy in units of kJ/mol.
December 13, 2010 by chemistry

chemistry
Consider the hypothetical elements X and Y. Suppose the enthalpy of formation for the compound XY is -336 kJ/mol, the bond energy for X2 is 414 kJ/mol, and the bond energy for Y2 is 159 kJ/mol. Estimate the XY bond energy in units of kJ/mol.
December 13, 2010 by Jude

physcial science
Jennifer, who has a mass of 50.0 kg, is riding at 35.0 m/s in her red sports car when she must suddenly slam on the brakes to avoid hitting a deer crossing the road. She strikes the air bag that brings her body to a stop in 0.500 s. What average force does the seat belt exert ...
May 8, 2014 by valerie

please read my introduction for media bias.
This is my introduction to my essay for media bias in television news. The primary source of political information in America is the media. [Media bias is a way to represent different people in a certain way based on their own views.] A certain degree of political bias exists ...
January 27, 2007 by david

PHYICS HELP
While a person is walking, his arms swing through approximately a 45 angle in .530s. As a reasonable approximation, we can assume that the arm moves with constant speed during each swing. A typical arm is 70.0 cm long, measured from the shoulder joint. 1) What is the ...
February 15, 2012 by BoB

Physics
A high diver of mass 70 kg jumps off a diving board and enters the water with the speed of 10 m/s the average upward resistance force of water exerts on the diver is 200 N. How far in the water will the diver travel before coming to rest?
June 16, 2014 by Anonymous

Physics
(a) Determine the amount of work (in joules) that must be done on a 95 kg payload to elevate it to a height of 1007 km above the Earth's surface. ANSWER in MJ (b) Determine the amount of additional work that is required to put the payload into circular orbit at this elevation...
March 22, 2011 by Steve

Accounting
An estimated liability: 1. Is an unknown liability of a certain amount. 2. Is a known obligation of an uncertain amount that can be reasonably estimated. 3. Is a liability that may occur if a future event occurs. 4. Is not recorded until the amount is known for certain. (...
April 1, 2014 by Jessica

Chemistry (DrBob222)
Hi, here's my (almost) 2-paged lab report introduction (hopefully you remember it from yesterday). I went to class today, and actually a lot of my other classmates' introductions were over 2 pages! Now I'm feeling kind of insecure about mine, and I'm not even sure if 2 pages ...
February 19, 2013 by a Canadian

Chem
When an ion-selective electrode for sulfate was immersed in 0.0300 M sodium sulfate, the measured potential was 0.0460 V. What is the concentration of sulfate when the potential is 0.0610 V? Assume that the electrode follows the Nernst equation, the temperature is at 25C, and...
March 29, 2015 by Cassie

chem
HOw much energy is required to heat 36.0g H2O from a liquid at 65C to a gas at 115C? The following physical data may be uselful. Hvap=40.7kJ/mol C liquid=4.18 C gas=2.01 C solid= 2.09 T melting=0 C T boiling=100 C The answers about 87.7 kJ However I'm not sure how you get this...
May 11, 2008 by natash

physics
A 1000 kg boat is traveling at 90 km/h when its engine is shut off. The magnitude of the kinetic frictional force f_k between the boat and water is proportional to the speed v of the boat: f_k = 70v, where v is in meters per second and f_k is in newtons. Find the time required...
August 30, 2010 by Kelsey

physics
While you are in detention after school, your teacher tells you to slide a large, 89.7 kilogram box across the floor. The coefficient of static friction (static) between the box and the floor is 0.50. Compute the force parallel to the ground (F parallel)required to start ...
January 12, 2015 by Drew

physics
A truck in driving up the interstate with a constant velocity. Is work being done by a net external force acting on the truck? Justify answer. Why doesn't the work done by the engine pushing it forward make its kenetic energy increase?
June 30, 2012 by Anonymous

physics
8) A 6.0-kg block initially at rest is pulled to the right along a frictionless, horizontal surface by a constant horizontal force of 12 N. Use the work-kinetic energy theorem to find the blocks speed after it has moved 3.0 m.
September 20, 2014 by papy

calculus (gr 12)
The forward motion of a space shuttle, t seconds after touchdown, is described by s(t) = 189t − t^3 , where " is measured in metres. a) What is the velocity of the shuttle at touchdown? b) How much time is required for the shuttle to stop completely? c) How far does the...
April 16, 2013 by Alexandra

calculus (gr 12)
The forward motion of a space shuttle, t seconds after touchdown, is described by s(t) = 189t − t^3 , where " is measured in metres. a) What is the velocity of the shuttle at touchdown? b) How much time is required for the shuttle to stop completely? c) How far does the...
April 17, 2013 by HELP MEE PLEASE

calculus (gr 12)
The forward motion of a space shuttle, t seconds after touchdown, is described by s(t) = 189t − t^3 , where " is measured in metres. a) What is the velocity of the shuttle at touchdown? b) How much time is required for the shuttle to stop completely? c) How far does the...
April 19, 2013 by PLEASE HELP ME!

calculus
6. The forward motion of a space shuttle, t seconds after touchdown, is described by s(t) = 189t − t^3 , where " is measured in metres. a) What is the velocity of the shuttle at touchdown? b) How much time is required for the shuttle to stop completely? c) How far does ...
April 20, 2013 by I JUST NEED TO KNOW D

Chemistry
why does inoinzation energy tend to decrease from top to bottom within a group? i'm not sure, but i think it has something to do with the size of the element The electrons involved in ionization, that is, the outermost electrons, are farther away from the nucleus, and are held...
October 31, 2006 by Mark

physics
An airplane maintains a speed of 597 km/h relative to the air it is flying through as it makes a trip to a city 759 km away to the north. (a) What time interval is required for the trip if the plane flies through a headwind blowing at 36.0 km/h toward the south? 1 h (b) What ...
October 5, 2011 by jon

Early Child Ed.
Would you please check these questions and my answer to be sure I have chosen the most appropriate choice? 1. There are many books in the library corner but they often wind up on the floor. What enviromental change might help? A. Close the library corner until the children ...
July 21, 2007 by Tamera L.

Physics
Part of a single rectangular loop of wire with dimensions .35 m by .75 m (.35 is the height and .75 is the length) is situated inside a region of uniform magnetic field of 0.395 T. The total resistance of the loop is 0.690 Ω. Calculate the force required to pull the loop ...
March 31, 2012 by Nadine

Physics
Part of a single rectangular loop of wire with dimensions .35 m by .75 m (.35 is the height and .75 is the length) is situated inside a region of uniform magnetic field of 0.395 T. The total resistance of the loop is 0.690 Ω. Calculate the force required to pull the loop ...
March 31, 2012 by Charlie

Chemistry
What occurs in the process of ionization? A. Acids dissociate to produce hydroxide ions, as their only negative ions. B. Strong bases ionize almost completely yielding a maximum quantity of hydrogen ions. C. Stationary solid ions are produced. D. Ions are formed by a dissolved...
June 24, 2010 by Sadie

physics
two point charges of 2 c and -3c are separated by 6cm what is the magnitude of the electrostatic force between them? and is the force attractive or repulsive? explain and what happens to the magnitude of the force when the distance is increased by a factor of 2 to 12cm
February 4, 2013 by debra

physics
Two forces act on an object. The first force has a magnitude of 17.0 N and is oriented 68.0 counter-clockwise from the x axis, while the 2nd force has x- and y-components (-19.0 N, 16.5 N). Express the magnitude and direction of the net force.
November 14, 2013 by James

Physic
A 60-g bullet fired at two blocks resting on a surface with coefficient of kinetic friction =0.5. The bullet pass through a 8-kg block and make this block slides 0.8 m. And then the bullet lodges in another block which is 6 kg. The bullet make it slides 1.2 m. Here is where i ...
March 3, 2015 by Takako

Physics
In stars, nucleons (protons and neutrons) form nuclei of atoms via a series of fusion reactions. If for a particular fusion reaction more energy is given off than is required to make it proceed, does the final nucleus have a higher or lower rest mass than the sum of the rest ...
May 9, 2009 by Nat

Physics
1) Calculate the tensile stress in a 33.000mm diameter rod subjected to a pull of 30.000kN. ANS= MPa (Round to 3 decimal places) Diameter = 33.000mm = 0.033m 30.000kN = 30000N Area = pi*d^2/4 = 3.1416 * 0.033^2/ 4 = 3.1416 *0.001089/ 4 = 0.0034212024/ 4 = 8.553006*10^-4 = 0....
July 1, 2013 by Danny

Precalculus
Write the equation an absolute value function is shifted up 2 units shifted right 3 units and horizontally stretched by 5
March 1, 2010 by Arielt

art
What exactly are modern and contemporary art? For school, I have to paint a piture that relates to a certain part of speech as well as a certain type of art era/period. I'm almost finished, so now i just want to know how to EXPRESS modern or maybe even contemporary art in my ...
November 21, 2008 by Melanie

Physics
A block with a mass of 5.0 kg is held in equilibrium on an incline of an angle with a measure of 30.0 degrees by the horizontal force F. Find the magnitude of F. Find the normal force exerted by the inbline on the block. (disregard friction) Well, I don't even know how to ...
November 14, 2006 by Becca

Ap Chemistry
I have no idea where to start with this problem: A certain reaction has the following general form: aA -> bB At a particular temperature and (A)o = 2.00(10^-2)M, concentration versus time data were collected for this reaction, and a plot of In(A) versus time resulted in a ...
December 8, 2009 by Shawn

AP Chemistry
I have no idea where to start with this problem: A certain reaction has the following general form: aA -> bB At a particular temperature and (A)o = 2.00(10^-2)M, concentration versus time data were collected for this reaction, and a plot of In(A) versus time resulted in a ...
December 8, 2009 by Shawn

Chemistry (Thermochemistry)
Is there any equation out there that links the change in enthalpy (H) to the change in cell potential/voltage (E)? Yes, but the relationship involves the Gibbs Free Energy, which is G = H - TS, snd S is the entropy change. The change in G is approximatly the change in H in ...
August 2, 2007 by Vic

Physics
In a cyclotron (one type of particle accelerator), a deuteron (of mass 2.00 u) reaches a final speed of 8.4% of the speed of light while moving in a circular path of radius 0.551 m. What magnitude of magnetic force is required to maintain the deuteron in a circular path?
October 5, 2010 by David

Physics
In a cyclotron (one type of particle accelerator), a deuteron (of mass 2.00 u) reaches a final speed of 10.1% of the speed of light while moving in a circular path of radius 0.540 m. What magnitude of magnetic force is required to maintain the deuteron in a circular path?
March 27, 2014 by Paul

physics
A solid sphere of weight 36.0 N rolls up an incline at an angle of 30.0o. At the bottom of the incline the center of mass of the sphere has a translational speed of 4.90 m s-1. Isphere = 2/5mr^2. What is the kinetic energy of the sphere at the bottom of the incline? How far ...
November 13, 2008 by kim

physics
An object of mass 200.0kg is moving from rest under the influence of net force 1.0Kn.Find the acceleration of the object and work done within 20.0s.What is the velocity of the object at the end of 20.0s interval of time? Calculate the kinetic energy
April 11, 2012 by ******tasha******

physics
An object of mass 200.0kg is moving from rest under the influence of net force 1.0Kn.Find the acceleration of the object and work done within 20.0s. What is the velocity of the object ar the end of 20.0s interval of time?.Calculate the kinetic energy
April 12, 2012 by ******tasha******

physics
a jeepney of a mass 1500kg is travelling at a speed of 20m/s (about 70km/h) a. what is the kinetic energy of the jeepney? b.suppose the driver suddenly steps on the brakes. if the force is 7500 newtons, what will be the distance traveled by the jeepney before it stops?
July 28, 2014 by Nialleen

Chemistry
World energy supplies are often measured in the unit of quadrillion British thermal units (10^12 btu), generally called a "quad." In 2015, world energy consumption is projected to be 5.81*10^17kJ. Current annual energy consumption in the United States is 99.3 quads. Assume ...
October 7, 2012 by M

Chemistry
World energy supplies are often measured in the unit of quadrillion British thermal units (10^12 btu), generally called a "quad." In 2015, world energy consumption is projected to be 5.81*10^17kJ. Current annual energy consumption in the United States is 99.3 quads. Assume ...
October 7, 2012 by M

Chem
In conjunction with a standard hydrogen electrode, the La3+|La half-cell is the anode and the standard cell potential is 2.52V. What is the standard reduction potential for the La3+|La half-cell?
March 31, 2008 by Ginger

physics
Airplane flight recorders must be able to survive catastrophic crashes. Therefore, they are typically encased in crash-resistant steel or titanium boxes that are subjected to rigorous testing. One of the tests is an impact shock test, in which the box must survive being thrown...
September 19, 2013 by paul

Physics Electric Force
Particle A of charge 2.76 10-4 C is at the origin, particle B of charge -6.54 10-4 C is at (4.00 m, 0), and particle C of charge 1.02 10-4 C is at (0, 3.00 m). We wish to find the net electric force on C. (a) What is the x component of the electric force exerted by A on C? (b...
April 11, 2013 by Alex

pie graph // math
Jorge and his family went to an amusement park over spring break. They spent $500.00. The pie graph shows how the $500.00 was divided over the trip. Use the pie graph to answer the question. Hotel : 2/5 How much money did Jorge and his family spend on a hotel...
May 9, 2011 by Lo

Physics
If you have a hydraulic lift and you know the density of the oil inside, the area of the cylinder and the area of the piston and the force that needs to be applied to lift as certain weight and the weight of that object...how do you find the height that the piston needs to be ...
December 7, 2009 by Sara

physics
if the coeffiecient of friction between a 32kg metal plate and the floor is 0.16, what force is required to roll this metal plate across the floor at a uniform speed? how much work is done if the metal plate is rolled to a distance of 15m? Please response i need your help.
September 22, 2014 by Work

physics
The temperature of 6.80 mol of an ideal monatomic gas is raised 12.0 K in an adiabatic process. What are (a) the work W done by the gas, (b) the energy transferred as heat Q, (c) the change ΔEint in internal energy of the gas, and (d) the change ΔK in the average ...
November 11, 2010 by san

Chemistry - matter and energy.
Distinguish between the view of matter and energy in microscopic world and view matter and energy in the quantum mechanical world. I do not understand this question, i tried googling it, but hardly got something to give me an idea about. Please help.
February 16, 2011 by Farah

physics
The temperature of 4.60 mol of an ideal monatomic gas is raised 15.0 K in an adiabatic process. What are (a) the work W done by the gas, (b) the energy transferred as heat Q, (c) the change ΔEint in internal energy of the gas, and (d) the change ΔK in the average ...
April 21, 2011 by tony

physics
The temperature of 4.60 mol of an ideal monatomic gas is raised 15.0 K in an adiabatic process. What are (a) the work W done by the gas, (b) the energy transferred as heat Q, (c) the change ΔEint in internal energy of the gas, and (d) the change ΔK in the average ...
April 21, 2011 by tony

physics
The temperature of 4.60 mol of an ideal monatomic gas is raised 15.0 K in an adiabatic process. What are (a) the work W done by the gas, (b) the energy transferred as heat Q, (c) the change ΔEint in internal energy of the gas, and (d) the change ΔK in the average ...
April 22, 2011 by niki

physics
The temperature of 2.10 mol of an ideal monatomic gas is raised 17.0 K in an adiabatic process. What are (a) the work W done by the gas, (b) the energy transferred as heat Q, (c) the change ΔEint in internal energy of the gas, and (d) the change ΔK in the average ...
April 23, 2012 by Anonymous

Graph help!
Sketch y= -(1/4) (2)^(x-4)+5 I know that the basic equation is y=2^x so is the graph translated 4 units right, vertically stretched by a factor of (1/4), reflected on the x-axis and translated up 5?
November 8, 2010 by Ali

Grade 12 Calculus
6. The forward motion of a space shuttle, t seconds after touchdown, is described by s(t) = 189t − t^3 , where " is measured in metres. a) What is the velocity of the shuttle at touchdown? b) How much time is required for the shuttle to stop completely? c) How far does ...
April 15, 2013 by Fadak

Grade 12 Calculus
The forward motion of a space shuttle, t seconds after touchdown, is described by s(t) = 189t − t^3 , where " is measured in metres. a) What is the velocity of the shuttle at touchdown? b) How much time is required for the shuttle to stop completely? c) How far does the...
April 18, 2013 by HELP MEE PLEASE

physics- multiple choice
1. The normal force is always less than or equal to force of gravity a) True b) False 2. What is the value of the normal force? (there is an image of a box with a mass of 10kg and it is sitting on a flat horizontal surface) a) 98 N [up] b) 98 N [down] c) 10 N [up] d) 10 N [...
December 16, 2013 by Jessie

Physics multiple choice
1. The normal force is always less than or equal to force of gravity a) True b) False 2. What is the value of the normal force? (there is an image of a box with a mass of 10kg and it is sitting on a flat horizontal surface) a) 98 N [up] b) 98 N [down] c) 10 N [up] d) 10 N [...
December 17, 2013 by Jessie

chemistry
1.Vapor pressure is the pressure exerted by a vapor when condensation A. < B. = C. > evaporation over its liquid in a closed system. 2.Evaporation is an A. endothermic B. exothermic process, because when a substance evaporates it must A. absorb B. release energy to(from...
January 25, 2010 by bubble

Physics
A box of mass m1 = 10.0 kg rests on a smooth, horizontal floor next to a box of mass m2 = 5.0kg. You push on the box 1 with a horizontal force of F = 31.8 N: a.)What net force on box 2 will cause it to have this acceleration? b.)What the force on box 1 on box 2? (In other ...
February 20, 2011 by Brandon

physics
three forces act on a ring. The net force on the ring is zero. One force is at an angle of 30 degrees with a magnitude of 40 Newtons. A second force F acts at an angle theta . The tangent of the angle is tan theta = 3 / 3 . If the third force is n3 Newtons, what is n3?
January 12, 2012 by frank

calculus
Could someone help me draw these vectors? These things confuse me. A force of 42 newtons acting on an object at an angle of 53 degrees with the ground A force of 342 lbs. acting on an object while a force of 454 pounds acts on the same object an angle of 94 degrees with the ...
February 21, 2010 by Jim

SCIENCE
FROM the point of view of an evriromentalist,which is probably the most significant argument against offshore drilling for oil? a)coal is a preferrable soure for oil. b)oil corporations are falsely advertiseing an oil shortage in order to expand thier drilling operations. c)...
October 9, 2007 by jessica

Physics
Brett decided that he was going to go bungee jumping at the WEM mall water park. If Brett weighs 95kg and he is 30 m above the water, how far will he fall IF the elastic force of the bungee cord is 1000N? Will he hit the water?
November 11, 2012 by Jocelyn

physics
3. What is the magnitude of the electric field strength E such that an electron, when placed in the field, would experience an electrical force equal to its weight? What electric field strength E is required if the electron is replaced by a proton
March 13, 2011 by lol

Physics
A lift is pulled up to the top of a building by a constant force of 6400N at a constant speed of 2m/s. It takes 3mins to reach the top. (a) how much work is done in raising the lift to the top of the building ? (b) what is the power required ?
June 2, 2011 by Lina

Physics
An airtight box, having a lid of area 12 in2, is partially evacuated. Atmospheric pressure is 15 lb/in2. A force of 108 lb is required to pull the lid off the box. The pressure in the box was:
December 16, 2010 by Sammy

Physics
An airtight box, having a lid of area 12 in2, is partially evacuated. Atmospheric pressure is 15 lb/in2. A force of 108 lb is required to pull the lid off the box. The pressure in the box was:
December 16, 2010 by Ken

Algebra
Help please! I got so far with this and stopped because of confusion. Here is what I have so far. Let f(x) = 6/x-1 and g(x) = 1 + 3/x find the composite function of (fog)(x) (fog)(x) = f (g(x)) =f (1+3/x) =6/x-1 ????
June 24, 2009 by Rachale

Finding distances
Person is 1.8 meters tall standing far away at angular height of 5 meters. How do I find how far way they are
February 2, 2012 by Carol

Finding distances
Person is 1.8 meters tall standing far away at angular height of 5 meters. How do I find how far way they are
February 2, 2012 by Carol

physics
It is important to be as far away from the cliff as possible before opening the parachute. How far from the cliff is this jumper when she opens her chute?
October 11, 2013 by jessie

chemistry
Calculate the cell potential for the following reaction as written at 51 degrees C, given that [Zn2+] = 0.837 M and [Sn2+] = 0.0180 M. Zn(s) + Sn^2+(aq) = Zn^2+(aq)+Sn(s) E = __ V Reduction Half-Reaction Standard Potential Ered (V) Zn2+(aq) + 2e → Zn(s) 0.76 Sn2+(aq...
June 7, 2012 by Katherine

math
ronnie swam 2.5 laps on monday and swam twice as far on tuesday how far did he swim in all?
April 23, 2013 by erica

Physics
A bridge that was 5.0m long has been washed out by the rain several days ago. How fast must a car be going to successfully jump the stream? Although the road is level on both sides of the bridge, the road on the far side is 2.0m lower than the road on this side.
October 19, 2008 by Joyce

physics
The driver of a 1024 kg truck traveling 32.6 m/s North on I-77 has to make a sudden stop. If it requires a distance of 57.1 m for the truck to stop, use conservation of energy to find the net force acting on the truck.
November 18, 2009 by Cory

physics
The driver of a 1024 kg truck traveling 32.6 m/s North on I-77 has to make a sudden stop. If it requires a distance of 57.1 m for the truck to stop, use conservation of energy to find the net force acting on the truck.
December 9, 2009 by Sandy

Energy
174520 = (massboiled) (2260) .1716 = massboiled so .1716? Suppose a burner transfers 325 kJ of energy to 450 kg of liquid water at 20 C degrees. What mass of the water would be boiled away? The first energy going in heats the water: energy=mass*c*(100-20) Then subtract that ...
December 17, 2006 by Min

Power generation
need help 2. Large central power stations typically have a power output capacity of 1000 MW and convert about 35 percent of the input energy to electricity. Consider such a plant that burns coal with an energy content of 24 MJ/kg. 1. How much coal (tons) is required by this ...
July 10, 2011 by paul smith

Dynamics
The man slides the 100-kg crate across force of 200 N. If the crate was initially at rest, how far will the crate move before its speed is 1 m/s? The coefficient of kinetic friction between the crate and the floor is 0.18. The man is pulling the crate at a 20 degree angle.
March 17, 2014 by Ivan

physics
three forces act on a ring. The net force on the ring is zero. One force is at an angle of 30 degrees with a magnitude of n1 Newtons. A second force F acts at an angle theta . The tangent of the angle is tan theta = 3 / 1.73 . If the third force is n3 Newtons, what is n3? look...
January 12, 2012 by frank

Physics
A horizontal force of 3,000,000 dynes can keep a 50 kg mass in uniform motion. What is the coefficient of the kinetic friction? At what angle must the plane be tilted to allow the mass to slide?
September 26, 2014 by Ked

Chemistry
A galvanic cell consists of La^3+/La half-cell and a standard hydrogen electrode. If the La^3+/La half cell functions as the anode and the cell potential is 2.52 V, what is the reduction potential for the La^3+/La half cell? the choices are -2.52V,-0.84V, +0.84V,+2.52V
March 9, 2010 by Anonymous

physics
e4) a rope applies a horizontal force of 190 N to pull a crate a distance of 2 m across the floor. A frictional force of 50N opposes this motion a) what is the work done by the force applied by the rope? b)what is the work done by the frictional force? c)what is the total work...
February 12, 2012 by Anonymous

Physics
A rope applies a horizontal force of 208 N to pull a crate a distance of 1.91 m across the floor. A frictional force of 154 N opposes this motion. (a) What is the work done by the force applied by the rope? (b) What is the work done by the frictional force? What is the total ...
July 2, 2014 by Anonymous

physics
A cart being pulled by a 10 year old Boy with a force that is parallel to the surface. if the surface is inclined at 50 and the cart is 250kg while the surface has a coefficient of friction of 0.22 find the Normal force, Force of Friction and Force exerted by the boy
July 27, 2014 by Lu

Physics
By what factor would you have to decrease the tension in a stretched string in order to decrease the wave speed by a factor of 3.5? I know that v = sqrt(T/u) but am confused as to what to do?
January 11, 2010 by Zoe

  1. Pages:
  2. <<Prev
  3. 78
  4. 79
  5. 80
  6. 81
  7. 82
  8. 83
  9. 84
  10. 85
  11. 86
  12. 87
  13. 88
  14. 89
  15. 90
  16. 91
  17. 92
  18. Next>>

Members