Wednesday

August 27, 2014

August 27, 2014

Number of results: 35,862

**mangement science the art of modeling w/ spreadshe**

Five years ago, an automobile manufacturer started offering an extended warranty to buyers of its sport-utility vehicle.Â Â The extended warranty covered defects occurring after the initial three-year warranty expired.Â Â Of the 10,...
*February 20, 2011 by melissa*

**Physics**

Consider a piece of metal that is at 5 deg C. If it is heated until it has twice the internal energy, its temperature will be. a)556 deg C b)283 deg C c)273 deg C d)278 deg C e)10 deg C
*November 19, 2012 by S*

**Chemistry**

What is the final temperature when 50.0 g of Chromium at 15 deg. C (specific heat of Cr = 0.107 cal/g-deg.) is added to 25 ml of 45 deg.C water?
*February 23, 2010 by Mary*

**physics**

A container of hot water at 80 deg C cools to 79 deg C in 15 seconds when it is placed in a room that is at 20 deg C. Use Newton's law of cooling to estimate the time it will take for the container to cool from 70 deg C to 69 deg C.
*October 19, 2011 by Dave*

**physics**

A container of hot water at 80 deg C cools to 79 deg C in 15 seconds when it is placed in a room that is at 20 deg C. Use Newtons law of cooling to estimate the time it will take for the container to cool from 70 deg C to 69 deg C.
*October 19, 2011 by Dave*

**Chemistry**

Ho much energy is needed to change a 50 g ice cube at 0 deg C to a liquid water at 100 deg. C?
*February 23, 2010 by Christopher*

**physics**

500g of water at 40 deg C and 200g of a mixture of ice and water are combined. The final temperature is 10 deg C. How much of the original 200g mixture was ice?
*February 23, 2008 by shan*

**Chemistry**

Determine the resulting temperature when 150 g of ice at 0 deg.C is mixed with 300 g of water at 50 deg C.
*February 23, 2010 by Stacie*

**Physics**

I'm trying to determine the specific heat of copper by experiment and I have a question about the change in temperature of the copper. If I take the copper out of boiling water at 100 deg. C and place it in water at 10 degrees C, the temp. of the water increases to 14 deg. Is ...
*May 7, 2009 by Brigid*

**Chemistry**

In order to raise the temperature of 5.0 Kg of water from 20 deg. C to 30 deg. C, a 2.0 kg iron bar is heated and then dropped into the water. What should the starting temperature of the bar be? (Specific heat Fe is 0.22 cal/g-deg.)
*February 23, 2010 by Lexie*

**Physics**

"Luke Skywalker mixes 250g of hot water (75 deg C) with 500g of cool water (15 deg C). What is the final temperature of the water?" If someone could just give me a formula, I'd be fine. :)
*October 4, 2008 by Jen*

**Geometry**

What is the value of x? image is on: tiny pic . com/r/nx1abn/8 I choose c 90 deg a 60 deg b 72 deg c 90 deg d 120 deg
*June 23, 2014 by Geo*

**physics**

Q.an aluminium can of mass 200gm contains 500gms of water at 50c.an ice cube of mass 50gms,initially at a temperature of -20c is thrown into the can of water. i.what is the final temperature onces the ice metls and comes into equilibrium? ii.now a 200gm piece of Iron whose ...
*June 1, 2013 by rosy*

**physics**

600g of water is mixed with 20g of steam at 100 deg Celcius. What is the final temperature if the original temperature of the water is 25 deg Celcius
*February 23, 2008 by shan*

**Phase Changes**

The heat of fusion of water is 335 J/g, the heat of vaporization of water is 2.26 kJ/g, the specifc heat of ice is 2.05 J/deg/g, the specific heat of steam is 2.08 J/deg/g and the specific heat of liquid water is 4.184 J/deg/g. How much heat would be needed to convert 10.73 g ...
*May 8, 2013 by Jenny*

**Physics**

25) A 75-g ice cube at 0 C is placed in 825g of water at 25 C. a) What is the final temperature of the mixture? b) If the final temperature is 0 C, then how much ice remains? c) change the ice's mass to 300g, and repeat the problem
*November 30, 2010 by Y0gi*

**Physics**

25) A 75-g ice cube at 0 C is placed in 825g of water at 25 C. a) What is the final temperature of the mixture? b) If the final temperature is 0 C, then how much ice remains? c) change the ice's mass to 300g, and repeat the problem I don't know how to work this at all!!! ...
*November 30, 2010 by Y0gi*

**physical**

Specific Heat. Copper has a specific heat of 0.092 cal/g/deg C. A 75 gram copper mass has been heated to a temperature of 100 degrees C. The copper is placed in thermal contact with 50 grams of water at 25 degrees C. What will be the final equilibrium temperature of the copper...
*November 23, 2013 by Anonymous*

**chemistry**

the heat of fusion water is335 J/g. The heat of evaporization of water is 2.26 kJ/g, the specific heat of ice is 2.05 J/Deg/g, the specific heat of steam is 2.08 J/deg/g and the specific heat of liquid water is 4.184 J/deg/g. How much heat would be needed to convert 12.09 g of...
*April 24, 2012 by Randy*

**Chemistry**

Will someone show me the formula or help me through working this question? Thanks! A 2.85g lead weight, initially at 10.3 deg C, is submerged in 7.55g of water at 52.3 deg C in an insulated container. what is the final temperature of both substances at thermal equilibrium?
*April 10, 2014 by Cathy*

**physics**

A 400 g marble block has a specific heat of 860 J/kg C deg. If the block is placed in 700 ml of water, the marble changes it temperature by 17 Celsius degrees. Since the specific heat of water is known to be 4186 J/kg C deg, what is the temperature change of the water. (The ...
*February 19, 2014 by Ann*

**phy**

A cube of ice is taken from the freezer at -7.5°C and placed in a 101 g aluminum calorimeter filled with 282 g of water at room temperature of 20°C. The final situation is observed to be all water at 16°C. What was the mass of the ice cube?
*December 2, 2010 by ami*

**physics**

A 400 calorie quantitiy of heat is added to 20 grams of water and as a result, the water reaches a final temp of 70 deg. C. The starting temp of the water was most nearly _____ deg C.
*November 12, 2010 by Sonya*

**Physics**

What will be the final temperature if 1.9 x 10^2 kJ of heat is added to 0.5 kg of ice at 0 deg. C?
*May 10, 2011 by Emily*

**PHYSICS**

What will be the final temperature if 1.9 x 10^2 kJ of heat is added to 0.5 kg of ice at 0 deg. C?
*November 7, 2012 by Sadie*

**Physics**

An object of mass 7.0 kg falls through a height of 47.0 meters and, by means of a mechanical linkage, rotates a paddle wheel that stirs 0.670 kg of water. The water is initially at 5.5 deg C, What is the maximun possible temperature of the water? (Answer in deg C)
*March 21, 2008 by Josh G,*

**Physics**

A cube of ice is taken from the freezer at -8.8°C and placed in a 103 g aluminum calorimeter filled with 321 g of water at room temperature of 20°C. The final situation is observed to be all water at 15°C. What was the mass of the ice cube? Could someone please help me get a ...
*April 20, 2012 by John*

**Physics**

If 9.30 x 10^5 J of energy are transferred to 2.00kg of ice at 0 deg C, what is the final temperature of the system?
*November 14, 2012 by S*

**Physics**

If 9.30 x 10^5 J of energy are transferred to 2.00kg of ice at 0 deg C, what is the final temperature of the system?
*November 15, 2012 by S*

**Physics**

1). A hot iron horseshoe (mass=.40kg), just forged, is dropped into 1.35L of water in a .30kg iron pot initially at 20.0 degrees Celsius. If the final equilibrium temperature is 25.0 degrees Celsius, estimate the initial temperature of the hot horseshoe. 2). A cube of ice is ...
*April 21, 2011 by Emily G.*

**Chemistry**

How much heat is required to change 10 g of ice at 0o deg C to steam at 100 deg. C?
*February 23, 2010 by Mari*

**Chemistry**

Calculate the heat (in kJ) required to change 40.0g of ice at -30.0 deg C to steam at 150.0 deg C?
*March 6, 2012 by Caitlin*

**Physics**

how much heat energy needed to convert 125g ice 27 deg C to 50 deg C
*January 31, 2013 by Zach*

**Chemistry**

How much heat is required to change 10 grams of ice at 0 deg. C to steam at 100 deg C?
*February 23, 2010 by Ally*

**Chemistry**

how much heat is needed to convert 966g of ice at -10 deg C to steam at 126 deg C
*June 22, 2011 by TC*

**physics**

Suppose 300 g of water at 20°C is poured over a 50-g cube of ice with a temperature of -6°C. If all the ice melts, what is the final temperature of the water? If all of the ice does not melt, how much ice remains when the water–ice mixture reaches equilibrium?
*July 26, 2012 by lanre*

**science**

If you have 10 lbs shrimp at 80 deg F how much ice would it take to reach 50 deg F in 10 minutes?
*August 7, 2013 by bill*

**college physics**

A cube of ice is taken from the freezer at -9.5 degree Celsius and placed in a 99 g aluminum calorimeter filled with 327 g of water at room temperature of 20.0 degree celsius. The final situation is observed to be all water at 17.0 degree Celsius. What was the mass of the ice ...
*January 18, 2011 by Nate*

**physics**

A 87-g ice cube at 0°C is placed in 886 g of water at 28°C. What is the final temperature of the mixture?
*April 17, 2012 by cindy*

**physics**

A 87-g ice cube at 0°C is placed in 886 g of water at 28°C. What is the final temperature of the mixture?
*April 17, 2012 by cindy*

**Physics**

A 68-g ice cube at 0°C is placed in 796 g of water at 30°C. What is the final temperature of the mixture?
*September 15, 2012 by shawn*

**Physics**

A cube of ice is taken from the freezer at -8.5 degrees celsius and placed in a 100 gram aluminum calorimeter filled with 300 grams of water at room temperature of 20 degrees celsius. the final situation is observed to be all water at 17 degrees celsius. what was the mass of ...
*March 18, 2012 by Donald *

**Physics**

I need to sketch a 45 deg - 45 deg - 90 deg triangle and indicate the lengths of each side assuming the hypotenuse is = to 1 meter
*February 19, 2010 by Lisa*

**Chemistry**

How much heat in kJ is lost when 100.0g of steam at 200 deg C is cooled down until it forms ice at -30.0 deg C?
*March 6, 2012 by Caitlin*

**Trig.**

I have answers for these problems, but I wanted to check if I had them right because I wasnt sure on some of them....Thanks. Solve the triangle: 1. a=4, b=8, alpha=30 deg. answer- beta=90 deg., gamma=60 deg., c=7 2. a=5, b=7, alpha=30 deg. answer- beta=44 deg., gamma=106 deg...
*December 12, 2006 by ashley*

**chemistry**

What mass (in grams) of CaCl2(s) must be dissolved in pure water at 10.0 deg Celsius to make a 26.4 mL solution and to increase the solution temperature to 16.4 deg Celsius? Assume that there is no heat loss from the solution and that the solution has the same physical ...
*November 16, 2008 by Anonymous*

**chemistry URGENT (1)**

What mass (in grams) of CaCl2(s) must be dissolved in pure water at 10.0 deg Celsius to make a 26.4 mL solution and to increase the solution temperature to 16.4 deg Celsius? Assume that there is no heat loss from the solution and that the solution has the same physical ...
*November 16, 2008 by Anonymous*

**physics**

A cube of ice is take from the freezer at -8.5C and placed in a 95g calorimeter aluminum cup containing 310g of water at 20degC. The final situation is observed to be all water at 17degC. What was the mass of the ice cube?
*April 24, 2011 by Mark*

**Physics**

Suppose 100 g of water at 20°C is poured over a 70-g cube of ice with a temperature of -8°C. If all the ice melts, what is the final temperature of the water? If all of the ice does not melt, how much ice remains when the water–ice mixture reaches equilibrium? I'm aware that ...
*July 19, 2012 by James*

**pre-cal**

Find the EXACT VALUE of csc(-11pi/12) If that angle is in radians, it is easy. A full circle has 2PI radians...or 360 deg so 22PI/24 is the same as 22*15 deg, or -30 deg. The 30 deg triangle is well known. The sin is 1/2, so the csc is 2 Figure out the sign of the csc from ...
*May 16, 2007 by ethan*

**physics**

The pressure in a constant-volume gas thermometer is 0.700atm at 100 deg. Celsius and 0.512atm at 0 deg. Celsius. a) What is the temperature when the pressure is 0.0550atm? b)What is the pressure at 500 deg. Celsius?
*December 2, 2008 by Becky*

**physics**

A 0.0400 kg ice cube at -30.0°C is placed in 0.400 kg of 35.0°C water in a very well insulated container. What is the final temperature?
*December 6, 2013 by angela *

**chemistry**

The amount of 2.00 mol of a solid ionic compound was dissolved in 225 mL of water in an insulated container. The initial temp of water was 20 deg. C and the final temp. was 47.8 deg C. What is the delta heat Dissolution? Assume the heat absorbed by the container is negligible.
*March 27, 2011 by carla*

**Physics**

A 6-g ice cube at −8°C is dropped into 70 g of water at 31°C. (a) After enough time has passed to allow the ice cube and water to come into equilibrium, what is the temperature of the water? (b) If a second ice cube is added, what will the temperature be?
*July 20, 2012 by Vladimir*

**Physics**

a): Two 50 g ice cubes are dropped into 200 g of water in a thermally insulated container. If the water is initially at 25 degree Celsius, and the ice comes directly from a freezer at -15 degree Celsius, what is the final temperature at thermal equilibrium? b): What is the ...
*December 10, 2013 by bano*

**chemisty**

In Duluth, Mn the average temperature is -13.10 deg C . How much ethonal glycol, C2H6O2, must be dissolved in 1.00 kg of water to make a radiator fluid that wouldn't freeze until the temp reached -20.00 deg C? would my answer be 666.5 g C2H6O2 ?
*February 20, 2014 by Ted*

**Chemistry**

To treat a burn on your hand, you decide to place an ice cube on the burned skin. The mass of the ice cube is 10.9 g, and its initial temperature is -12.0 °C. The water resulting from the melted ice reaches the temperature of your skin, 29.6 °C. How much heat is absorbed by ...
*April 12, 2014 by Karen*

**physics**

Consider four vectors F1, F2, F3, and F4, with magnitudes are F1 = 41 N, F2 = 24 N, F3 =27 N, and F4 = 51 N, and angle 1 = 150 deg, angle 2 = −160 deg, angle 3 = 39 deg, and angle 4 = −57 deg, measured from the positive x axis with the counter clockwise angular ...
*February 16, 2011 by anonymous*

**Chemistry**

To treat a burn on your hand, you decide to place an ice cube on the burned skin. The mass of the ice cube is 16.0 g, and its initial temperature is -11.4 °C. The water resulting from the melted ice reaches the temperature of your skin, 31.0 °C. How much heat is absorbed by ...
*December 8, 2012 by Anon*

**chemistry**

To treat a burn on your hand, you decide to place an ice cube on the burned skin. The mass of the ice cube is 16.0 g, and its initial temperature is -10.4 °C. The water resulting from the melted ice reaches the temperature of your skin, 28.3 °C. How much heat is absorbed by ...
*April 25, 2013 by Audre*

**Warren**

To treat a burn on your hand, you decide to place an ice cube on the burned skin. The mass of the ice cube is 13.2 g, and its initial temperature is -11.9 °C. The water resulting from the melted ice reaches the temperature of your skin, 30.0 °C. How much heat is absorbed by ...
*November 20, 2013 by Kyla*

**Taylor**

To treat a burn on your hand, you decide to place an ice cube on the burned skin. The mass of the ice cube is 12.6 g, and its initial temperature is -10.4 °C. The water resulting from the melted ice reaches the temperature of your skin, 28.1 °C. How much heat is absorbed by ...
*November 15, 2013 by Aubrey*

**math (algebra)**

Water boils at 212 degrees F at sea level (altitude 0 ft), 204.6 degrees F at 40000 ft, 197.2 deg. F at 8000 ft, and 189.8 deg. F at 12,000 ft. Find a good model relating the boiling temperature t of water to the altitude a.Is the model linear or quadratic?
*May 3, 2009 by Layne*

**physics**

A 5-g ice cube at ?4°C is dropped into 60 g of water at 40°C. (For the following problems, use the specific heats in this table and the numerical data found in this table.) (a) After enough time has passed to allow the ice cube and water to come into equilibrium, what is the ...
*July 26, 2012 by lanre*

**physics**

A 50g ice cube is added to 110g of water in a 62g aluminum cup. The water and cup initially have a temperature of 23°C. Find the initial temperature of the ice cube such that all of the water is just turned to ice. Use the following specific heats: water = 4186 J/(kg•K), ice...
*June 29, 2010 by sandhya*

**Heat Transfer**

A 1 m square verticalplate is heated to 300 deg C and placed in room air at 25 Deg C. calculate the heat loss from the one side of the plate
*March 27, 2014 by RHS*

**Physics**

A 43 g ice cube at 0 C is placed in 882 g of water at 81 C. What is the final temperature of the mixture? The specific heat of water is 4186 J/kg · C and its latent heat of fusion is 3.33 × 105 J/kg . Answer in units of C
*April 23, 2013 by dallas*

**Chemistry**

In the reaction: Protection of 1-Phenylethanol by 3,4-Dihydro-2H-pyran, 1-phenylethanol, 3,4-Dihydro-2H-pyran and anhydrous ether were added first and stirred in ice-water bath before acid catalyst p-toluenesulfonic acid monohydrate was added. The reaction was kept at 0 deg ...
*September 4, 2010 by Alan*

**chemistry**

A thimbleful of water at 100 deg C has a higher temp than a swimming pool full of water at 20 deg C, but the pool has more thermal energy than the thimble. Explain why this is possbile?
*April 26, 2010 by lala*

**Science**

I conducted an experiment of the heat of combustion for three alcohol fuels, methyl, propyl and ethyl. The results were: Methyl - mass before was 231.81g temp of water before heating was 15 deg c. temp of water after heating was 40 deg c. mass of methyl after heating 229.92g ...
*November 8, 2010 by Paul*

**Almeida**

The two largest diner chains in Kansas compete for weekday breakfast consumers. The two chains, Golden Inn and Village Diner, each offer weekday breakfast customer a â��breakfast clubâ�� membership that entitles customers to a breakfast ...
*December 7, 2010 by Pedro*

**CHEMISTRY**

selenium tetrafluoride, SeF4 is a colorless. it has vapor pressure of 757mmhg at 105 deg c and 522mmhg a 95 deg c. what is the vapor pressure of carbon disulfide at 35 deg c?
*September 19, 2007 by Del*

**physics**

A technician needs to determine the amount of energy required to increase the temp. of a vat containing 12 kg of water. The water enters the vat from the water mains at a temp. of 15 deg C. The technician knows that the final temp. required is 90 deg C. How much energy is ...
*April 8, 2014 by Huliney*

**Phys 2**

I am having trouble figuring out this question: Part 1: A long staight wire carries a current due East. This wire creates, at point #1, a magnetic field that is derected at 40 deg below due South. From point #1, the wire is located: 50 deg below due North 50 deg below due ...
*March 16, 2011 by Sonia*

**Physics**

I am having trouble figuring out this question: Part 1: A long staight wire carries a current due East. This wire creates, at point #1, a magnetic field that is derected at 40 deg below due South. From point #1, the wire is located: 50 deg below due North 50 deg below due ...
*March 16, 2011 by Sonia*

**physics**

A 40-g block of ice is cooled to −71°C and is then added to 590 g of water in an 80-g copper calorimeter at a temperature of 27°C. Determine the final temperature of the system consisting of the ice, water, and calorimeter. (If not all the ice melts, determine how much ...
*April 6, 2012 by kevin*

**physics**

A 40-g block of ice is cooled to −71°C and is then added to 590 g of water in an 80-g copper calorimeter at a temperature of 27°C. Determine the final temperature of the system consisting of the ice, water, and calorimeter. (If not all the ice melts, determine how much ...
*April 11, 2012 by anthony *

**chemistry**

substance X has a molar mass of 107.6 g/mol. When 2.50 g of substance x burns in an iron calorimeter, the temp. of the calorimeter and the water (2.000 Kg) increases from 25.8 deg. C to 38.7 deg. C. What is the molar heat of combustion of substance X in KJ/Mole. Heat capacity ...
*March 27, 2011 by carla*

**Memt 202**

If a rod of 1025 steel 0.5 m (19.7 in) long is heated from 20 to 80 deg C (68 to 176 deg F) while its ends are maintained rigid, determine the type and magnitude of stress that develops. Assume that at 20 deg C the rod is stress free.
*November 11, 2010 by alok*

**physics**

Given: latent heat of fusion of water 3.33x10^5 J/kg. A 147 g cube of ice at 0 degress C is dropped into 1.3 kg of water that was originally at 79 degrees C. What is the final temperature of the water after the ice melts.
*December 8, 2009 by Ericka*

**Please Please Help-Physics**

I am having trouble figuring out this question: Part 1: A long staight wire carries a current due East. This wire creates, at point #1, a magnetic field that is derected at 40 deg below due South. From point #1, the wire is located: 50 deg below due North 50 deg below due ...
*March 16, 2011 by Sonia*

**Chemistry**

Calculate the temperature change in the water upon complete melting of the ice. Hint: Determine how much heat is absorbed by the melting ice and then use q =mC*Delta T to calculate the temperature change of the 314 g of water. under the following conditions: A 14.7 g ice cube ...
*November 18, 2010 by Ricardo*

**Physics**

An electrical generating plant operates at a boiler temperature of 220 deg C and exhausts the unused heat into a nearby river at 18 deg C. what is the maximum theoretical efficiency of the plant?
*November 19, 2012 by R*

**Chem 212**

To treat a burn on your hand, you decide to place an ice cube on the burned skin. The mass of the ice cube is 16.1 g, and its initial temperature is -13.3 °C. The water resulting from the melted ice reaches the temperature of your skin, 31.3 °C. How much heat is absorbed by ...
*February 19, 2013 by 1231az*

**Physics**

A 3.90×10^2kg cube of ice at an initial temperature of -18.0degreesC is placed in 0.480kg of water at 41.0degreesC in an insulated container of negligible mass. Calculate the change in entropy of the system. I found the equilibrium temperature to be at 304.9K, then used change...
*December 7, 2010 by Melissa*

**Heat Transfer**

A fin 30 cm long & 10mm diameters throughout is made of steel alloy of thermal conductivity 43 W/m-deg. the fin attached to a plane heated wall at 200 deg.C temp. extends into surroundings at 25 deg.C.& Unit surface conductance of 120W/m^2-deg. Workout the heat flow rate from ...
*August 1, 2012 by Rafeeq*

**Heat Transfer**

A fin 30 cm long & 10mm diameters throughout is made of steel alloy of thermal conductivity 43 W/m-deg. the fin attached to a plane heated wall at 200 deg.C temp. extends into surroundings at 25 deg.C.& Unit surface conductance of 120W/m^2-deg. Workout the heat flow rate from ...
*August 1, 2012 by Guru*

**geometry**

Two angles of a quadrilateral measure 210° and 100°. The other two angles are in a ratio of 2:3. What are the measures of those two angles? I know the four angles add to 360 deg. So the two unknowns are 50 deg together. 20 and 30 deg angles would give a ratio of 2:3, but what ...
*April 21, 2011 by Leilani*

**chemistry**

Assuming that sea water is a 3.5 wt% solution of NaCl in water, calculate its osmotic pressure at 20 deg C. The density of a 3.5% naCl solution at 20 deg C is 1.023 g/mL. How do I go about solving this?
*February 28, 2008 by Sarah*

**Geography**

What is the time and day at a certain place X (Lat 25 deg N,Long 33 deg W) when at is 2.30 AM on Thurs Day at a place Y (Lat 25 deg S,Long 27 deg E) ?
*May 3, 2011 by Sumit Guha*

**Physics**

A pond with a flat bottom has a surface area of 820 m^2 and a depth of 2.0m. on a warm day, the surface water is a temperature of 25 deg C, while the bottom of the pond is at 12 deg C. Find the rate at which energy is transferred by conduction from the surface to the bottom of...
*November 18, 2012 by R*

**chemistry**

a 14.7g ice cube is placed into 324g og water. calvulate the temperature change in the water upon complete melting of the ice. hint: determine how ,uch heat is absorbed by the melting ice and then use q=mc delta T to calculate the temperature change. use the heat of fusiion ...
*May 4, 2010 by janny*

**maths (trigonometry)**

calculate the following: 1)sin 50 degree-sin 70 degree+sin 10deg. 2)cos square 48 deg.- sin square 12 deg. 3)tan 20 deg.+tan 40 deg.+root 3 tan 20 tan 40 Plz. Solve these
*June 8, 2011 by marley*

**chemistry**

Calculate the temperature change in the water upon complete melting of the ice. Hint: Determine how much heat is absorbed by the melting ice and then use q =mC*Delta T to calculate the temperature change of the 314 g of water. under the following conditions: A 14.7 g ice cube ...
*November 17, 2010 by jose*

**Physics**

Inside an insulated container, a 250-g ice cube at 0°C is added to 200 g of water at 18°C. (i) What is the final temperature of the system? (ii) What is the remaining ice mass?
*April 27, 2013 by Meder*

**physics**

A 46 g ice cube at 0◦C is placed in 988 g of water at 90◦C. What is the final temperature of the mixture? The specific heat of water is 4186 J/kg · ◦C and its latent heat of fusion is 3.33 × 105 J/kg . Answer in units of ◦C
*July 8, 2013 by M&M*

**Math--Please Help**

A traverse with five sides has interior angles with the following measures: 121deg 45 min: 118 deg 25 min; 87 deg 32 min; 98deg 34min, and 113 deg 54 min. Does the traverse close? If not, determne the error in the traverse.
*February 4, 2013 by Barb*

**more physics.**

What change in entropy occurs when a 27.9-g ice cube at -12 C is transformed into steam at 115 C? Add the entropy changes due to: (1) heating the ice to 0C, (2) melting the ice, (3) heatng the water from 0 to 100 C, and (4) Evaporating the liquid water. For (2) and (3), the ...
*April 26, 2007 by jean*

**science**

You freeze 92g of water, and it becomes a cube of ice. a. What is the mass of the ice cube? b. The cube's volume os 100cm3. What is it's density? c. Will the ice cube float or sink in water?
*December 7, 2012 by Max*

**Chemistry**

Two 20.0g ice cubes at -10.0 C are placed into 275g of water at 25.0 C. Assuming no energy is transferred to or from the surroundings, calculate the final temperature of the water after all the ice melts.
*July 9, 2011 by Josh *

Pages: **1** | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | Next>>