Thursday
March 30, 2017

Number of results: 14,520

chemistry
10). What is the molarity of an HCl solution if 42.5 mL of a 0.110 M KOH solution is needed to titrate a 25.0-mL sample of the acid? A) 0.187 M HCl B) 0.587 M HCl C) 0.0647 M HCl D) 5.35 M HCl E) 1.70 M HCl
November 28, 2011 by denis

Chemistry
A sample of impure magnesium was analyzed by allowing it to react with excess HCl solution: Mg(s) + 2 HCl(aq) → MgCl2(aq) + H2(g) After 1.27 g of the impure metal was treated with 0.100 L of 0.768 M HCl, 0.0125 mol HCl remained. Assuming the impurities do not react, what...
September 22, 2013 by James

Chemistry
What volume of hydrogen gas measured at 27celcius and 723 torr may be prepared by the reaction of 8.88 grams of gallium with an excess of hydrochloric acid? Ga+ HCl ==> GaCl3 + H2
March 25, 2012 by Anonymous

Chemistry
A 5.0 mL sample of HCl is placed in a flask. Titration required 15.0 mL of .20 M NaOH. What is the molarity of the HCl in the sample?
March 24, 2013 by Michael

Chemistry
A student titrates a 25.00 mL sample of HCl. If 20.50 mL of 0.175 M of KOH is required to reach the end point, what is the concentration of the HCl? 25.0 mL HCl x 1L/1000 mL x 0.175 M/1 L = 0.004375 mol HCl 0.004375 mol HCl/20.50 mL KOH x 1000 mL/1 L = 0.213 M HCl (I'm ...
November 19, 2015 by Linda

chemistry
A .500 g sample of impure CaO (a solid) is added to 50.0 mL of 0.100 M HCl. The excess HCl is titrated by 5.00 mL of .125 M NaOH. What is the percentage of CaO in the sample?
May 9, 2012 by b

chem
A 25.0 mL sample of 0.723 M HClO4 is titrated with a KOH solution. The H3O+ concentration after the addition of of KOH is
December 16, 2014 by dj westfall

Chemistry
Calculate the percent purity of a sample of zinc metal if 325 mL of hydrogen gas is collected by water displacement at a temperature of 22.0 C and an atmospheric pressure of 745.0 mm Hg when 1.12 g of the sample is reacted with excess HCl: Zn + 2 HCl = H2 + ZnCl2. The vapor ...
December 11, 2014 by Harry

Chemistry
A sample of 0.0020 mole of HCl is sissolved in water t omake a 2000ml solution. Calculate the molarity of the HCl solution, the (H30+) and the pH. For a strong acide such as HCl the (h30+) is the same as the molarity of the HCl solution. HCl +H20 Balanced equation H30+ +Cl
December 1, 2010 by Susie

Biochem
I did a titiration expriment and I need to work out how much Hcl is in the sample (NaOH). The expriment was testing the rate of ester hydrolysis . I was wondering if the the amount of Hcl present is the same as NaOH added due to the equivalence of the acid and base but I also ...
November 30, 2014 by annnnnnnnnnnnnnnnnn

chemistry
"Stomach acid" is hydrochloric acid. A sample of gastric juice having a volume of 6.68 mL required 13.90 mL of 0.0161 M KOH solution for neutralization in a titration. What was the molar concentration of HCl in this fluid? C(HCl) = If we assume a density of 1.00 g mL-1 for the...
June 14, 2015 by walter

chem class
A 25.00-mL sample of 0.723 M HClO4 is titrated with a 0.273 M KOH solution. The H3O+ concentration after the addition of 10.0 mL of KOH is ???? M.
November 23, 2010 by richard

Chemistry
A 0.450-gram sample of impure CaCO3(s) is dissolved in 50.0 mL of 0.150 M HCl(aq). The equation for the reaction is: CaCO3(s)+2HCl(aq) -> CaCl2(aq) + H2O(l) + CO2(g) The excess HCl(aq) is titrated by 9.75 mL of 0.125 M NaOH(aq). Calculate the mass percentage of CaCO3(s) in ...
April 10, 2012 by Katherine

science
Al(s) + HCl(aq) AlCl3(aq) + H2(g) Zn(s) + HCl(aq) ZnCl2(aq) + H2(g) Consider the unbalanced equations above. A 0.250 g sample of a mixture of aluminum and zinc metal is reacted with an excess of hydrochloric acid. Both metals react with hydrochloric acid. The sample produces ...
April 29, 2013 by samantha

Chemistry
Al(s) + HCl(aq) AlCl3(aq) + H2(g) Zn(s) + HCl(aq) ZnCl2(aq) + H2(g) Consider the unbalanced equations above. A 0.200 g sample of a mixture of aluminum and zinc metal is reacted with an excess of hydrochloric acid. Both metals react with hydrochloric acid. The sample produces ...
October 7, 2013 by Connor

difficult chemistry
502g sample of dry cac03 and cacl2 mixture was dissolved in 25ml of 0.925 M HCL solution. What was cacl2 percentage in original sample if 22ml of 0.09312 m NAOH was used to titrated excess HCL? The answer 29.89% Who helps me
January 12, 2013 by Fai

ap chemistry
please explain titration problems. I'm a total noob at this and am trying to answer some prelab questions. Examples: 1. How many mL of a 0.800 M NaOH solution is needed to just neutralize 40 mL of a 0.600 M HCl solution? 2. You wish to determine the molarity of a solution of ...
October 2, 2008 by chris

Chemistry
A 23.596 g sample of aqueous waste leaving a fertilizer manufacturer contains ammonia. The sample is diluted with 79.504 g of water. A 13.803 g aliquot of this solution is then titrated with 0.1098 M HCl. It required 29.02 ml of the HCl solution to reac the methyl red endpoint...
November 14, 2011 by Mike

chemistry
A 23.596 g sample of aqueous waste leaving a fertilizer manufacturer contains ammonia. The sample is diluted with 79.504 g of water. A 13.803 g aliquot of this solution is then titrated with 0.1098 M HCl. It required 29.02 ml of the HCl solution to reac the methyl red endpoint...
November 14, 2011 by Mike

Chem
A gas generator is constructed to collect the CO2(g) evolved from a reaction. during lab we set up the CO2 generator by placing 10ml of 3 M HCL in a 200mm test tube. then slide the 75mm test tube into the 200mm test tube without splashing any of the acid into the sample. The ...
November 16, 2011 by Ben

Chemistry
a 110 g solid sample that is a mixture of CaCO3 and CaCl2 is reacted with 1.50 L of 1.45M HCl. Of the calcium salts, only calcium carbonate reacts with HCl- the reaction forms CaCl2 and CO2. The excess/unreacted HCl requires 0.850 L of 0.543 M NaOH to titrate it to the ...
December 3, 2012 by Cristian

Analytical Chemistry
A 22.617 g sample of aqueous waste leaving a fertilizer manufacturer contains ammonia. The sample is diluted with 70.407 g of water. A 10.883 g aliquot of this solution is then titrated with 0.1072 M HCl. It required 29.32 mL of the HCl solution to reach the methyl red ...
February 28, 2013 by Sam

Chemistry
In aqueous solution, hydrochloric acid, HCl, and sodium carbonate, Na2CO3 react to produce gaseous carbon dioxide, CO2, water, H2O and sodium chloride, NaCl. A 10.0 g impure sample of Na2CO3 is dissolved completely in water; then treated with 3.00 mol L−1 HCl to evolve ...
June 15, 2014 by Olivia

Chemistry
Calculate the mass of a sample of gold that occupies 0.723 cm3. The density of gold is 19.3 g/cm3. Answer in units of g.
September 30, 2015 by a

chemistry
QUESTION 4 Data Set 3: 47.65 mL of a standard 0.1000 mol L–1 HCl solution is used to titrate a 0.3827 g sample containing NaOH and other impurities. None of the impurities reacted with the HCl. What is the mass of NaOH in the sample? a. 0.1737 g b. 0.2103 g c. 0.1906 g d. 0....
May 29, 2016 by jess

chemistry
HCl is titrated with NaOH. When doing the titration, some of the NaOH splashed onto the inside surface of the Erlenmyer flask, and you forgot to rinse it into your sample. Would the systematic error be falsely high, low, or unaffected and why? Thanks. As I understand the ...
September 17, 2006 by bria

Chemistry
A 20.0 ml sample of an unknown HCl solution requires titration with 15.0ml of 0.1MNaOH solution to reach equivalent point. What is the concentration of the HCl solution? HCl + NaOH ¨ H2O + NaCl A. 0.000075 B. 75 C. none of these D. 0.075
March 5, 2011 by Aaron

chemistry
A student adds 25.00mL of distilled water to a 10.00mL sample of HCl of an unknown molarity and titrates this against a 0.085M NaOH solution. Will the addition of the water interfere with the determination of the molarity of the HCl sample? Why or why not?
October 28, 2014 by xx

chem
A 0.069 gram sample of a metal reacted with HCl and produced 45.31 mL of H 2 gas at 25¡ÆC and 1 atm pressure. The metal is known to react with HCl according to the following reaction, 2 M + 6 HCl > 2 MCl 3 + 3 H 2 What is the molar mass of the metal? Which metal is it?
October 31, 2014 by jhon

Chemistry
A 25.00 mL sample of HCl was titrated with 35.79 mL of 0.250 M KOH. The concentration of the HCl solution is:
April 6, 2015 by Kay

chemistry
A 40 mL sample of 0.25 M NaCHOO is titrated with 0.2 M HCl. What is the pH of the solution after 140 mL of HCl has been added?
March 2, 2011 by Eddy

chemistry
A 25 mL solution of .5M NaOH is titrated until neutralization into a 50mL sample of HCl. What was the concentration of HCl?
February 22, 2011 by E

chemistry
The pH of saturated Sr(OH)2 (aq) is found to be 13.12. A 10.0 mL sample of saturated Sr(OH)2 (aq) is diluted to 250.0 mL in a volumetric flask. A 10.0 mL sample of the diluted Sr(OH)2 (aq) is transferred to a beaker, and some water is added. The resulting solution requires 26....
March 28, 2010 by anonymous

Chemistry
A 20.0-mL sample of 0.20M sodium acetate is titrated with 0.11M HCl(aq). What is the pH after the addition of 50.0-mL HCl(aq)? (Kb of CH3CO2 = 5.6x10^-10)
March 26, 2010 by Sean

chemistry
What is the concentration of HCl in a 250.0 mL sample of hydrochloric acid if 15.5 mL of 0.0100 M NaOH is needed to react with all the HCl?

chem2
A small piece of zinc is dissolved in 22.29 mL of 0.968 M HCl. Zn (s) + 2 HCl (aq) ----> ZnCl2 (aq) + H2 (g) At the end of the reaction, the concentration of the 22.29-mL sample is redetermined and found to be 0.691 M HCl. What must have been the mass of the piece of zinc ...
September 22, 2008 by fru

Analytical chemistry
A 24.393 g sample of aqueous waste leaving a fertilizer manufacturer contains ammonia. The sample is diluted with 80.601 g of water. A 12.404 g aliquot of this solution is then titrated with 0.1059 M HCl. It required 31.61 mL of the HCl solution to reach the methyl red ...
April 4, 2013 by Ashley

Chemistry
a 40.0 ml sample of ca(oh)2 was titrated with 0.0704 m hcl. the volume of hcl needed to reach equivalence point was 18.2 ml. what was the concentration of ca2+ present in the original solution?4
April 22, 2015 by Dahnrae

APChem
Hi! Thank you for your help... A 25.0 mL sample of 0.723 M HClO4 is titrated with a 0.273 M KOH solution. The H3O+ concentration after the addition of 66.2 mL of KOH is ______M. (The answer is supposed to be 1.00X10^-7) How do I set this problem up? I realize that it is a ...
March 21, 2010 by Kiki

Chemistry
A1g sample of enriched water, a mixture of H2O AND D2O, reacted completely with Cl2 to give a mixture of HCl and DCl. The HCl and DCl were then dissolved in pure H2O to make a 1.00 L solution. A 25.00 mL, sample of the 1 L solution was reacted with excess AgNO3 and 0.3800g of ...
September 21, 2013 by Anirudh

Chemistry
Can someone please explain me how to do this problem? A 25mL solution of 0.5 M NaOH is titrated until neutralization into a 50mL sample of HCl. What was the concentration of the HCl?
February 24, 2011 by Abigail

Chemistry 151
5) How many mL of 1M HCl is used to make the following dilutions? a) 100mL of 0.1M HCl = b) 250mL of 0.5M HCl= c) 10ml of 0.01M HCl= 36.64 is the molar mass of hcl do I divide that into ml?
March 16, 2014 by Selina

calculus
Based on data from 1993 to 2000, the rate of change in the annual per capita personal income in New Mexico may be modeled by R(t)= 8.45t2 + 45.94t + 723.00 dollars per person per year, where t is the number of years since the end of 1993. (Source: Modeled from Bureau of ...
March 8, 2013 by paulie749

chemistry
The pH of saturated is found to be 13.12. A 15.0mL sample of saturated Sr(OH)2 is diluted to 250.0mL in a volumetric flask. A 15.0 mL sample of the diluted Sr(OH)2 is transferred to a beaker, and some water is added. The resulting solution requires 27.6mL of a HCl solution for...
April 11, 2011 by chips ahoy

Chemistry
A 1.00 g sample of enriched water, a mixture of H2O and D2O, reacted completely with Cl2 to give a mixture of HCl and DCl. The HCl and DCl were then dissolved in pure H2O to make a 1.00 L solution. A 25.00 mL sample of the 1.00 L solution was reacted with excess AgNO3 and 0....

Temperature
Q: A reaction rate has a constant of 1.23 x 10-4/s at 28 degrees C and 0.235 at 79 degrees C. Determine the activation barrier for the reaction. A: My work thus far: ln(1.23 x 10-4/0.235)=(Ea/8.314)(1/79-1/28) -7.551=(Ea/8.314)(0.01265-0.03571) -7.551=(Ea/8.314)(-0.02305) 327....
February 1, 2013 by Amy

chem
The pH of saturated Sr(OH)2 is found to be 13.12. A 15.0ml sample of saturated Sr(OH)2 is diluted to 250.0ml in a volumetric flask. A 15.0ml sample of the diluted Sr(OH)2 is transferred to a beaker, and some water is added. The resulting solution requires 29.3ml of a HCl ...
April 2, 2009 by tomi

chemistry
A 0.2528 g sample of a mixture containing sodium carbonate and sand requires 12.32 mL of 0.2409 M HCl(aq). Assuming that the sand does not react with the HCl(aq), what percentage of the mixture is sodium carbonate? Balanced equation: Na2CO3(s) + 2 HCl(aq) ¨ 2 NaCl(aq) + CO2...
October 5, 2010 by Jordin

chemistry
31.0mL sample of LiOH, concentration unknown, is titrated with .52 M HCl. It takes 42.9 ml of HCl to reach the endpoint. What is the concentration of the base?
April 26, 2012 by kendra

chemistry
A 337-\rm mL sample of unknown \rm HCl solution reacts completely with \rm Na_2CO_3 to form 17.1g \rm CO_2. What was the concentration of the \rm HCl solution?
April 7, 2013 by Lauren

Chemistry
A 495-mL sample of unknown HCl solution reacts completely with Na2CO3 to form 18.1g CO2. What was the concentration of the HCl solution?
May 5, 2014 by Jenn

chemistry
if 16.o ml HCL is needed to neutralize from a 2.25g sample of organic material, calculate the mass percentage of N in the sample
October 13, 2012 by allison

Chemistry
For the gas phase decomposition of chloroethane, CH3CH2Cl C2H4 + HCl the rate constant at 723 K is 1.75E-4 /s and the rate constant at 769 K is 2.19E-3 /s. The activation energy for the gas phase decomposition of chloroethane is
January 23, 2014 by Breauna

Chemistry
Calculate the pH of a 25 mL sample of distilled water after the addition of 1 mL, 2 mL, 3 mL, 4 mL, and 5 mL of NaOH and HCL. (0.1 M HCl and NaOH) In total, you need to show 10 calculations.
March 14, 2011 by Mariah

chemistry solution preparations
how can we prepare 0.5 n solution of hcl as we have 37% hcl and 0.1n hcl. and we want to make 0.5n hcl from 0.1n hcl by pouring 37% hcl?
July 7, 2014 by asif

college chem
Calculate the pH of a 25 mL sample of distilled water after the addition of 1 mL, 2 mL, 3 mL, 4 mL, and 5 mL of NaOH and HCL. (0.1 M HCl and NaOH) In total, you need to show 10 calculations.
March 14, 2011 by Mariah

Chemistry - urgent
The following is part of a procedure for a limit test for sulphates in an NaOH sample:- Dissolve 3.0g of NaOH in 6ml of deionized water, adjust to pH 7 with HCl (approx.7.5ml) and dilute to 15ml with deionized water. Please explain how to perform this procedure. Conc HCl or 1M...
September 21, 2010 by candy

chemistry
The nitrogen content of a .2476 g sample of a protein was determined by the Kjeldahl method. The NH3 produced with the whoosh was distilled into exactly 50.00mL of HCl in the receiving flask, which was in excess of the amount required to capture the ammonia gas. The excess HCl...
October 27, 2015 by lisa

chemistry
determine the molarity of a 18 ml sample of HCl solution that is required to prepare 30 ml of 2.3 M HCl solution?
February 11, 2011 by linda

chemistry
Trial 1 Volume of HCL is 2.51 mL Molarity of the HCL is 0.10 M Mols HCL = L x M = 0.0251 L x 0.10 M = 0.00251 mol/L The equation for the titration is Ca()H)2 + 2HCL --> CaCl2 + 2H2O I will now take 0.5 mols HCl to give mols of OH- 0.00251 mol/L x 0.5 = 0.001255 mol/L mols ...
April 4, 2008 by Tim's Titration Lab

Chemistry
25g of a sample of ferrous sulphate was dissolved in water containing dilute h2s04 and the volume made up to one litre. 25ml of this solution required 20ml of N/10 kmn04 solution for complete oxidation. Calculate the percentage of f2s04 7h20 in the sample 1 g of mixture of ...
January 11, 2014 by Ken Hung

analytical chemistry
The nitrogen content of a .2476 g sample of a protein was determined by the Kjeldahl method. The NH3 produced with the whoosh was distilled into exactly 50.00mL of HCl in the receiving flask, which was in excess of the amount required to capture the ammonia gas. The excess HCl...
October 27, 2015 by Anonymous

chemistry
A chemist needs a HCl solution with a molarity of less than 0.400 M for an experiment. To find out if a sample of HCl solution can be used in the lab, the chemist performs a titration to neutralize 59.2 mL of the HCl with 45 mL of 0.400 M NaOH. Based on the results, will the ...
January 31, 2014 by Matthew

chemistry
A 0.052g sample of aluminium reacts with excess 6M HCL. A 48.3mL volume of hydrogen gas was collected over water at 22C and the pressure of the hydrogen gas was 751mmHg.calculate the aluminum percent purity in the sample. What volume of hydrogen gas at STP is produced from the...
October 30, 2014 by jeffrisa

chemistry
if 53.0mL of 0.150M of HCl is needed to neutralize all the NH3 from a 2.28g sample of organic material. what is the mass percent of notrogen in the sample?
November 1, 2012 by lisa mendez

Finding the Activation Barrier
Q: A reaction rate has a constant of 1.23 x 10-4/s at 28 degrees C and 0.235 at 79 degrees C. Determine the activation barrier for the reaction. A: My work thus far: ln(1.23 x 10-4/0.235)=(Ea/8.314)(1/79-1/28) -7.551=(Ea/8.314)(0.01265-0.03571) -7.551=(Ea/8.314)(-0.02305) 327....
January 31, 2013 by Amy

chemistry
1. why is it necessary to use boiled and cooled water in the dilution of the carbonate sample? 2. an aliquot of the diluted sample is titrated with some standard HCl until near the equivalence point, then it is boiled for 2-3 minutes. why should we boil it? 3. any method to ...
January 6, 2011 by angelo

chemistry
A 10 milliliter sample of HCl pickle is titrated with 0.2 N NaOH to a phenol-phthalein end point and it is found that 6.5 milliliters are used. What is the concentration of HCl in the Pickle in grams per liter? In weight Percent?
February 3, 2012 by bob

qnt/351
Which of the following statements about the two sample sizes is NOT true? Assume thepopulation standard deviations are equal A. Sample A = 11; sample B = 13 B. Sample A = 12; sample B = 14 C. Sample A = 13; sample B = 13 D. Sample A = 10; sample B = 16
March 31, 2014 by arelis

chemistry
how many mL of 1M HCL is used to make: 100mL of 0.1M hcl 250Ml OF 0.5M hcl 10Ml OF 0.01m hcl
March 29, 2014 by Tammy

Chemistry
Tungsten trioxide (WO3) has a rich yellow color and is often used as a pigment in ceramics and paints. In order to test a ceramic vase for its WO3 content, a 10.10 g sample of the vase was ground and reduced with Pb(Hg) to convert any WO3 to W3 . The resulting W3 was ...
April 16, 2013 by Jessica

chemistry
Tungsten trioxide (WO3) has a rich yellow color and is often used as a pigment in ceramics and paints. In order to test a ceramic vase for its WO3 content, a 10.19 g sample of the vase was ground and reduced with Pb(Hg) to convert any WO3 to W3 . The resulting W3 was ...
May 28, 2013 by Decisice 2

Chemistry
A 0.2512 stock sample of HCl is tirade to equivalence . If 16.77ml of 0.1410 M NaOH is required to reach the equivalence point, what volume of stock HCl was used for the tritation?
September 15, 2016 by Nicole

Chemistry
1) Prepare 100mL of 10%w/w HCl from 37%concentrated HCl(density of 37%HCl =1.19g/ml) 2) Prepare 100mL of 10%w/v HCl from 37% concentrated HCl(density of 37%HCl=1.19g/ml) Can you please show the calculation steps for 1) & 2)? Is 10%w/v HCl the same as 10%w/w HCl? Thanks.
March 12, 2012 by Annie

chemistry
When a 0.5725 g sample of Lysol was titrated with 0.100 M NaOH, and endpoint was obtained at 15.00 mL. What is the percent of HCL in the lysol sample?
June 21, 2010 by Alisha

chemistry
When a 0.5725 g sample of Lysol was titrated with 0.100 M NaOH, an endpoint was obtained at 15.00 mL. What is the percent of HCl in the Lysol sample?
March 22, 2012 by hank

chemistry
A 0.205 g sample of impure NaOH requires 17.5 mL of 0.2180 M HCl for neutralization. What is the percent of NaOH in the sample, by weight?
November 30, 2014 by Kate

chemistry
a 35.0ml sample of 37 hcl solution has a density of 1.18g/ml. the sample is diluted to a volume of 0.125L. what is the molarity of the final solution ?
May 5, 2013 by john

chemistry
a 35.0ml sample of 37% hcl solution has a density of 1.18g/ml. the sample is diluted to a volume of 0.125L. what is the molarity of the final solution ?
May 5, 2013 by john

Tungsten trioxide (WO3) has a rich yellow color and is often used as a pigment in ceramics and paints. In order to test a ceramic vase for its WO3 content, a 10.19 g sample of the vase was ground and reduced with Pb(Hg) to convert any WO3 to W3 . The resulting W3 was ...
May 29, 2013 by Decisice 2

Chemistry - urgent help needed
The following is part of a procedure for a limit test for sulphates in an NaOH sample:- Dissolve 3.0g of NaOH in 6ml of deionized water, adjust to pH 7 with 12M HCl (about 6.2ml) and dilute to 15ml with deionized water. When about 6ml of 12M HCl was added, a white ppt was ...
September 22, 2010 by candy

Chemistry Lab
A student who is performing this experiment pours an 8.50mL sample of saturated borax solution into a 10mL graduated cylinder after the borax has cooled to a certain temperature, T. The student rinses the sample into a small beaker using distilled water, and then titrates the ...
March 13, 2013 by ConfusedStudent

Chemistry
Tungsten trioxide (WO3) has a rich yellow color and is often used as a pigment in ceramics and paints. In order to test a ceramic vase for its WO3 content, a 10.20 g sample of the vase was ground and reduced with Pb(Hg) to convert any WO3 to W3 . The resulting W3 was ...
March 25, 2015 by Cassie

chemistry
Okay so I did this problem, but it seems wrong? I put the answers I got... Determine the pH of the following tiration at each of the points indicated. A 71.7 mL solution of 0.182 M NaOH is titrated with 0.2086 M HCL. 1.) initial pH= is it 7.86 or 8.51? 2.) after addition of 10...
October 9, 2011 by help meeee pleaaseee

Chemistry - repost
Why 7ml of 10M HCl? Do I add 7ml of 10M HCl 1st slowly in ice bath, then slowly adjust the pH to 7 using 10M HCl? Then to dilute to 15ml in a graduated cylinder? Thanks Posted by candy on Tuesday, September 21, 2010 at 10:03am. The following is part of a procedure for a limit ...
September 21, 2010 by candy

Chemistry
The active ingredient of the antacid is CaCO3 and so Sally chose titration with HCl as a method for analysis. What is the mass (in g) of the CaCO3 in the sample of antacid, if it is titrated by 21.2 mL of HCl solution with concentration of 0.1048 mol/L to reach the endpoint?
March 14, 2010 by Cody

Chemistry
8.5g of sample of iron required just 75cm3 of 3.00M HCl to dissolve it and give a neutral solution.Calculate the percentage purity of the sample of iron.
November 16, 2014 by Kazembeous

Chem
Ca(s) + 2H+(aq) → Ca2+(aq) + H2(g) An experiment is performed to determine the volume of hydrogen gas produced when calcium reacts with excess HCl(aq) as represented by the net ionic equation above. A 0.0720 g sample of pure calcium and a solution of 1.0 M HCl(aq) were ...
April 23, 2013 by Jess

Chemistry
Instead of using ratios for back titrations we can also use molarities if our solutions are standardized. A 0.188g sample of antacid containing an unknown amount of triprotic base Al(OH)3 was reacted with 25.0mL of 0.101M HCl. The resulting solution was then titrated with 10....
April 3, 2015 by Caroline

Chemistry
Instead of using ratios for back titrations we can also use molarities if our solutions are standardized. A 0.188g sample of antacid containing an unknown amount of triprotic base Al(OH)3 was reacted with 25.0mL of 0.101M HCl. The resulting solution was then titrated with 10....
April 6, 2015 by Caroline

Analytical chemistry
an 0.5031 gram sample of iron ore is determined through redox titration using K2Cr2O7. The sample was dissolved in HCl and all the iron was converted to the 2+ state. Titration to the endpoint required 24.34 mL of 0.01887 mol/L K2Cr2O7. Calculate the amount of Fe2O3 as a ...
April 9, 2016 by Sam

Chemistry
a 20.0ml sample of HCL solution is placed in a flask with a few drops of indicator. If 30.0ml of a 0.240 M NaOH solution is needed to reach the endpoint, what is the molarity of the HCL solution?
April 15, 2013 by Ashleigh

Chem 1A
A 15.00 g sample of an ionic compound NaA, where A- is the anion of a weak acid, was dissolved in enough water to make 100.0 mL of solution and was then titrated with 0.100 M HCl. After 700.0 mL of HCl was added, the pH was 5.00. The experimenter found that 1.40 L of 0.100 M ...
March 15, 2012 by Ashley

chemistry
A 1.272 g sample of a mix Na2CO3 and NaHCO3 vol of 0.24 N HCl required for PP end point 26.92 ml after the addition 52.21 ml more of the HCl and boilling out CO2 the vol of 0.12 NaoH required to give a pink colour to the soln = 4 ml
September 10, 2016 by naara

chemistry
A 0.4671g sample containing sodium bicarbonate was titirated with hcl requiring 40.72ml. The acid was standardized by titrating 0.1876g of sodium carbonate FW 106mg/mmol requiring 37.86ml of the acid. Find the percentage of nahc03 fw 84mg/mmol in the sample. My own calculation...
November 25, 2012 by Fai

chem
HCl is a strong acid and ionizes 100%. NaOH is a strong base and ionizes 100%. We have no way of knowing the pH of HCl + H2O because the problem doesn't state the amount of HCl added or the concentration of HCl. For the NaOH + HCl ==> NaCl + HOH. NaCl in water is a neutral ...
May 15, 2007 by DrBob222

Chemistry
A 51.46 mL sample of an ammonia solution is analyzed by titration with HCl. The reaction is given below. NH3(aq) + H+(aq) NH4+(aq) It took 38.57 mL of 0.0984 M HCl to titrate (react completely with) the ammonia. What is the concentration of the original ammonia solution?
October 28, 2010 by Anonymous

chemistry
Magnesium metal reacts with HCl solution, liberating H2 gas and generating Mg2+ cations in solution. A 2.335-g sample of Mg metal is added to 50.0 mL of a 4.00 M HCl solution, and the reaction goes to completion. How many grams of H2 are formed?
September 1, 2011 by ALEX

Chemistry
Magnesium metal reacts with HCl solution, liberating H2 gas and generating Mg2+ cations in solution. A 2.970-g sample of Mg metal is added to 50.0 mL of a 4.00 M HCl solution, and the reaction goes to completion. How many grams of H2 are formed?
September 13, 2011 by Carolina

Chemistry
A 0.18 g sample of unknown was placed in a flask and dissolved in 125 mL of deionized water. A solution of HCl (0.13 M) was used to titrate the sample, and 16 mL was required to reach the endpoint. What is the formula weight of the unknown?
April 24, 2016 by Taylor

1. Pages:
2. 1
3. 2
4. 3
5. 4
6. 5
7. 6
8. 7
9. 8
10. 9
11. 10
12. 11
13. 12
14. 13
15. 14
16. 15
17. Next>>

Post a New Question