Thursday
May 5, 2016

# Search: 20 kg. mass block 1.4 acceleration .28 co-friction

Number of results: 41,292

Physics
A 5.1- kg concrete block rests on a level table. A 3.4- kg mass is attached to the block by a string passing over a light, frictionless pulley. If the acceleration of the block is measured to be 1.3 m/s2, what is the coefficient of friction between the block and the table? ...
March 24, 2014 by Alex

Physics
Block A is 4.5 kg and Block B is 2.25 kg. a. determine the mass of block C that must be placed on block A to keep it from sliding if the coefficient of static friction between block A and the table is 0.2 b. If the coefficient of kinematic friction between the surface and ...
February 29, 2016 by Diana

Physics
A force of 12.7 N pulls horizontally on a 1.4-kg block that slides on a rough, horizontal surface. This block is connected by a horizontal string to a second block of mass m2 = 2.32 kg on the same surface. The coefficient of kinetic friction is µk = 0.22 for both blocks. (a) ...
November 13, 2014 by Denise

physics
A 4 kg wooden block rest on a table. the coefficient of friction between the block and the table is .40. a 5kg mass is attached to the block by a horizontal string passed over a frictionless pulley of neglible mass what is the acceleration of the block when the 5 kg mass is ...
February 2, 2010 by Tori carr

Physics
Block 1, of mass m1 = 0.650kg , is connected over an ideal (massless and frictionless) pulley to block 2, of mass m2, as shown. For an angle of θ = 30.0∘ and a coefficient of kinetic friction between block 2 and the plane of μ = 0.400, an acceleration of ...
October 3, 2013 by Joe

physics
A block of wood with a mass of 1300g is sitting on a horizontal tabletop. The coefficient of kinetic friction between the block and table is µk=0.74.A rifle bullet with a mass of 39g is fired horizontally into the block at a sped of 290m/s and stops inside the block. a-what is...
February 19, 2015 by aaron

physics
Block 1, of mass1 = 0.550kg , is connected over an ideal (massless and frictionless) pulley to block 2, of mass2 , as shown. For an angle of = 30.0 and a coefficient of kinetic friction between block 2 and the plane of = 0.300mu(kinetic friction), an acceleration of magnitude...
October 23, 2012 by Samantha

Physics
A block M1 of mass 13.0 kg sits on top of a larger block M2 of mass 23.0 kg which sits on a flat surface. The kinetic friction coefficient between the upper and lower block is 0.440. The kinetic friction coefficient between the lower block and the flat surface is 0.140. A ...
November 2, 2014 by Sarah

cary collage
"A 2.5-kg block slides down a 25 degree inclined plane with constant acceleration. The block starts from rest at the top. At the bottom, its velocity reaches 0.65 m/s. The length of the incline is 1.6m. a) What is the acceleration of the block? b) What is the coefficient of ...
September 27, 2010 by sahan

physics
block a in figure 1 has a mass of 10kg, and block b has a mass of 30 kg. the coefficient of friction between b and the horizontal surface is 0.3. a) what is the mass of block c if block b is moving with an acceleration of 3m/s/s b) what is the tension in each cord when b is ...
January 9, 2013 by flay

Physics
A block M1 of mass 20.0 kg sits on top of a larger block M2 of mass 30.0 kg which sits on a flat surface. The kinetic friction coefficient between the upper and lower block is 0.415. The kinetic friction coefficient between the lower block and the flat surface is 0.115. A ...
October 2, 2015 by Marty

Physics
Block A has a mass of 20kg and is placed on top of cart B which has a mass of 100 kg. Blosk A has a pulley attatched to it with a force of P acting towards the right. Cart B is on rollers. The coefficient of kinetic and static friction are both the same value of 0.5. Find the ...
October 23, 2009 by Jessi

physics
A 450 g block is at rest on a horizontal surface. The coefficient of static friction between the block and the surface is 0.670, and the coefficient of kinetic friction is 0.380. A force of magnitude P pushes the block forward and downward as shown in the figure below. Assume ...
October 17, 2011 by carlton

physics
A 450 g block is at rest on a horizontal surface. The coefficient of static friction between the block and the surface is 0.670, and the coefficient of kinetic friction is 0.380. A force of magnitude P pushes the block forward and downward as shown in the figure below. Assume ...
October 19, 2011 by carlton

physics
A block M1 of mass 16.5 kg sits on top of a larger block M2 of mass 26.5 kg which sits on a flat surface. The kinetic friction coefficient between the upper and lower block is 0.425. The kinetic friction coefficient between the lower block and the flat surface is 0.125. A ...
February 22, 2014 by Mimi

Physics
In the drawing, the weight of the block on the table is 405. N and that of the hanging block is 191. N. Ignore friction, the mass of the rope, and the mass of the pulley. Find the acceleration of the two block system in m/s2.
December 19, 2012 by Toung

physics
In the drawing, the weight of the block on the table is 428. N and that of the hanging block is 195. N. Ignore friction, the mass of the rope, and the mass of the pulley. Find the acceleration of the two block system in m/s2.
December 14, 2014 by Jill

Physics
Suppose a hanging 1.0 kg lab mass is attached to a 4.0 kg block on the table. a. If the coefficient of kinetic friction, uk is 0.20, what is the acceleration of the block? b. What would be the minimum value of the coefficient of static friction, Us, in order for the block to ...
January 28, 2011 by jdajaljk

physics
a block is pushed up against the wall. Let the mass of the block be m = 2.8 kg, the coefficient of kinetic friction between the block and the wall be µ = 0.56, and θ = 61◦ . Suppose F = 73 N. The acceleration of gravity is 9.8 m/s 2 Find the force of friction. ...
November 18, 2014 by Anonymous

Physics
A block of mass m1 is on top of a block of mass m2. Block 2 is connected by an ideal rope passing through a pulley to a block of unknown mass m3 as shown. The pulley is massless and frictionless. There is friction between block 1 and 2 and between the horizontal surface and ...
June 23, 2013 by Rose

physics
Block A has a mass of 6.07 kg and is on a rough incline of 12.5o to the horizontal. Block B has a mass of 4.82 kg and the coefficient of kinetic friction between Block A and the plane is 0.268. What is the acceleration of the blocks? What is the tension in the string? can ...
November 9, 2011 by Yul

physics
A block of wood of mass 6.0 kg slides along a skating rink at 12.5 m/s^2 [w] . The block slides onto a rough section of ice that exerts a force of 30 N force of friction on the block of wood. The acceleration of the block of wood is 5.0 m/s^2 [E] and it takes 2.5s to stop. How...
March 27, 2012 by Isabella

physics
A block of wood of mass 6.0 kg slides along a skating rink at 12.5 m/s^2 [w] . The block slides onto a rough section of ice that exerts a force of 30 N force of friction on the block of wood. The acceleration of the block of wood is 5.0 m/s^2 [E] and it takes 2.5s to stop. How...
March 27, 2012 by Isabella

Physics
Can someone help me solve this one? I've tried it a few times, but I don't think I'm getting it right. A block of mass M = 2.2 kg starts from rest at a height of 3.6 m on a fixed inclined plane. The coefficient of kinetic friction between the block and the incline is μ = ...
March 3, 2015 by James

mechanics
Q2. A block of massmrests on the left edge of a block of larger massM. The coefficient of kinetic friction between the two blocks is , and the surface on which the larger block rests is frictionless. A constant horizontal force of magnitude F is applied to the block of mass m...
December 9, 2010 by sana

Physics
If the coefficients of static and kinetic friction between a 20 kg block that sits on top of a 100 kg block are both essentially the same value of 0.5, determine the acceleration of each block for a force pulling on A of 60 N. Bottom block sits on a friction-less floor. (I was...
August 8, 2014 by OMG_Newton

physics
4 kg block rests on a smooth horizontal surface,upper surface of 4 kg is rough.A block of mass 2 kg is placed on its upper surface.The acceleration of upper block with respect to earth when 4 kg mass is pulled by a horizontal force of 30N?coefficient of static friction=0.8 and...
June 4, 2014 by zoha

physics
The coefficient of static friction between a block and a horizontal floor is 0.37, while the coefficient of kinetic friction is 0.10. The mass of the block is 3.8 kg and it is initially at rest. Once the block is sliding, if you keep pushing on it with the same minimum ...
November 21, 2010 by anonymous

physics
A block of mass m = 5.4 kg is pulled up a θ = 24° incline as in the figure with a force of magnitude F = 35 N. (a) Find the acceleration of the block if the incline is frictionless. m/s2 (b) Find the acceleration of the block if the coefficient of kinetic friction between...
February 21, 2016 by john

Physics
Block A sits on a horizontal tabletop. There is friction between the surface and Block A. The string passes over a frictionless, massless pulley. Block B hangs down vertically. When the two blocks are released, Block B accelerates downward at a rate of 2.030 m/s2. Block A (...
February 18, 2016 by Rachel

Physics
A block of mass m = 5.9 kg is pulled up a è = 21° incline as in the figure with a force of magnitude F = 34 N. (a) Find the acceleration of the block if the incline is frictionless. 1 Your response differs from the correct answer by more than 10%. Double check your ...
October 7, 2011 by Imani

Physics - Newtons laws
A block (mass m1 = 8kg) is moving on an inclined plane, coefficient of kinetic friction of 0.45, whose angle is 30degrees. This block is connected to a second block (mass m2 = 22kg) by a cord that passes over a small frictionless pulley. Find the acceleration of each block and...
February 24, 2012 by Anonymous

Physics
A block of mass m1 = 4.80 kg sits on top of a second block of mass m2 = 15.6 kg, which in turn is on a horizontal table. The coefficients of friction between the two blocks are µs = 0.300 and µk = 0.100. The coefficients of friction between the lower block and the rough table ...
October 31, 2009 by Annie

Physics
A wooden block with mass 0.26{\rm kg} rests on a horizontal table, connected to a string that hangs vertically over a friction-less pulley on the table's edge. From the other end of the string hangs a 0.20{\rm kg} mass. What minimum coefficient of static friction \mu _{{\rm s...
October 18, 2012 by Nichole

mechanics and fluids
a block of mass 6 kg resting on a horizontal surface is connected by a cord passing over a light, frictionless pulley to a hanging block of mass 4 kg. the coefficient of kinetic friction between the block and the horizontal surface is 0.5. after the block are released, find ...
September 8, 2014 by francis

Physics
Consider the diagram of the box and bucket. If the coefficient of static friction is 0.5 and the coefficient of kinetic friction is 0.3, find the maximum mass of the bucket in order for the system to be in static equilibrium. If the block was given a slight nudge to get it ...
January 1, 2011 by Caitlin

physics
Block A (Mass = 2.319 kg) and Block B (Mass = 1.870 kg) are attached by a massless string as shown in the diagram. Block A sits on a horizontal tabletop. There is friction between the surface and Block A. The string passes over (you guessed it) a frictionless, massless pulley...
October 8, 2015 by Carly

science/acceleration
Due to a cart's sudden acceleration, a 200g wooden block remains on the front of the cart and does not slide or fall off. The mass of the cart is 10kg. The coefficient of static friction between the block and the front of the cart is 0.30. Calculate the cart's minimum ...
September 2, 2010 by dave

Physics
The blocks A and B are connected by a piece of spring. Block B rests on an inclined plane of 40° and block A hangs vertically. The coefficient of kinetic friction between block A and the inclined plane is 0.29. Calculate the acceleration of the system if the mass of block A is...
February 7, 2015 by Alex

physics
1 A block of mass mb sits atop a at wooden plank of mass mp on a plane inclined an angle theta with respect to thehorizontal. The two are supported near the bottom of the plane by a spring of spring constant k that is in contactwith the plank but not the block. If the coecient...
October 18, 2011 by lala

Physics
Block A of mass 115 kg rests on a table with which it has a coefficient of limiting friction of 0.37. A light cord passes horizontally from Block A, without slipping, over a pullet of mass 34kg, radius 120 mm and radius of gyration 84mm, and down vertically of block B of mass ...
August 19, 2012 by Alex

physics
A block is released on an inclined plane from a height of 1m. There is friction (static and kinetic =.4) and the mass of the block is 5 kg, the mass of the pulley is 1 kg and it has a radius of 5 cm. The slope of the incline is 30 degrees. Find the acceleration of the block as...
November 18, 2011 by Rachael

Physics
A block of mass 12 kg starts from rest and slides a distance of 8 m down an inclined plane making an angle of 40◦ with the horizontal. The coeﬃcient of sliding friction between block and plane is 0.4. The acceleration of gravity is 9.8 m/s^2 What is the net force ...
January 28, 2013 by Murry

Physics
A 5.7- kg concrete block rests on a level table. A 4.0- kg mass is attached to the block by a string passing over a light, frictionless pulley. If the acceleration of the block is measured to be 1.0 m/s2, what is the coefficient of friction between the block and the table?
February 21, 2012 by Steve

Physics
A 5.7- kg concrete block rests on a level table. A 4.0- kg mass is attached to the block by a string passing over a light, frictionless pulley. If the acceleration of the block is measured to be 1.0 m/s2, what is the coefficient of friction between the block and the table?
February 21, 2012 by Steve

Physics
A 5.7- kg concrete block rests on a level table. A 4.0- kg mass is attached to the block by a string passing over a light, frictionless pulley. If the acceleration of the block is measured to be 1.0 m/s2, what is the coefficient of friction between the block and the table?
February 21, 2012 by Eva

Physics
A 5.0- kg concrete block rests on a level table. A 3.7- kg mass is attached to the block by a string passing over a light, frictionless pulley. If the acceleration of the block is measured to be 1.0 m/s2, what is the coefficient of friction between the block and the table?
February 21, 2015 by Jordan

physics
There is a block on top of an incline plane. The incline is going down to the right. The angle to the right of the 90 is 36.9 degree. There is a force pushing on it from the left. Find the applied force (F) needed to prevent the block from sliding down the incline; ignore ...
June 26, 2011 by k9

physics
A block of mass 0.8 kg is dragged along a level surface at constant velocity by a hanging block of mass 0.2 kg as shown in fig. 2.29. Find tension in the string and acceleration of the system, if the coefficient of friction between the block and the surface is 0.045 with ...
June 14, 2013 by Ashima

Physics
A block of mass 5.53 kg lies on a frictionless horizontal surface. The block is connected by a cord passing a. over a pulley to another block of mass 2.25 kg which hangs in the air. Assume the cord to be light (massless and weightless) and unstretchable and the the pulley to ...
February 21, 2014 by Emeera

physics
A block of mass 3.62 kg lies on a frictionless horizontal surface. The block is connected by a cord passing over a pulley to another block of mass 7.8 kg which hangs in the air, as shown. Assume the cord to be light (massless and weightless) and unstretchable and the pulley to...
November 15, 2012 by alice

Physics
A block of mass m1 = 4.90 kg sits on top of a second block of mass m2 = 14.5 kg, which in turn is on a horizontal table. The coefficients of friction between the two blocks are µs = 0.300 and µk = 0.100. The coefficients of friction between the lower block and the rough table ...
November 16, 2013 by Tom

high school physics static friction
The system shown below is in equilibrium. Using the fact that block A is placed on a table, has a normal force of 40.2 N and it is not moving, what is the coefficient of static friction on block A? I know you can't answer this but if you have any suggestions: Calculate the ...
December 8, 2010 by Jess

physics
Block a is moving with a certain acceleration along a frictionless horizontal surface. When a second block B is placed on top of block A, the acceleration of the combined block drops to 1/5 the original value. What is the ratio of the mass of A to the mass of B :
November 30, 2012 by maihul

Physics
A lower block is being pulled to the right across a wooden table and it is 5kg and the block on top of it weighs 2 Kg. The friction between the table and the lower block is reduces the total acceleration to be 1.5 m/s2. Friction keeps the upper block attached to the lower one...
February 21, 2011 by Paige

physics
the coefficient of starting friction for wood on wood is 0.55. What is the force of friction of a wood block of mass 3.5 kg being pulled on a wood floor? i think i use the formula F=mMA where F is the force needed to move a solid from rest, m=coefficient of friction, M=mass of...
October 17, 2010 by courtney

Physics
What is the acceleration of the upper block? The coefficient of kinetic friction between the lower block and upper block is 0.0005. The coefficient of kinetic friction between lower block and floor is 0.0001. Upper block is 1kg, lower block is 2kg, and Force of 20N is applied ...
May 25, 2010 by Doug

Dynamics of Rigid Bodies
The system of blocks A and B and two pulleys C and D is assembled as shown in the figure. Neglecting friction in and the mass of the pulleys, and assuming that the whole system is initially at rest, determine the acceleration of block A. The coefficient of kinetic friction ...
April 10, 2013 by Anonymous

urgent physics ?
I have drawn my force body diagrams, but I need help making forming the equation for this problem. Any assistance is greatly appreciated! A 60 kg block slides along the top of a 100 kg block. The lighter block has an acceleration of 3.8 m/s2 when a horizontal force F= 390 N is...
October 3, 2014 by stevie

Physics
A block of mass 2.30kg is accelerated across a rough surface by a rope passing over a pulley. a) The tension in the rope is 12.4N, and the pulley is 11.2cm above the top of the block. The coefficient of kinetic friction is 0.415. Determine the acceleration of the block when x...
October 7, 2015 by Presley

physics
Question # 1 : What is the maximum acceleration a car can undergo if the coefficient of static friction between the tires and the ground is 0.82? Question # 2 : A 1.5-kg block rests on top of a 7.5kg block. The cord and pulley have negligible mass, and there is no significant...
May 6, 2012 by lennon

physics
Question # 1 : What is the maximum acceleration a car can undergo if the coefficient of static friction between the tires and the ground is 0.82? Question # 2 : A 1.5-kg block rests on top of a 7.5kg block. The cord and pulley have negligible mass, and there is no significant...
May 6, 2012 by lennon

physics
Question # 1 : What is the maximum acceleration a car can undergo if the coefficient of static friction between the tires and the ground is 0.82? Question # 2 : A 1.5-kg block rests on top of a 7.5kg block. The cord and pulley have negligible mass, and there is no significant ...
May 7, 2012 by ericka

physics
Question # 1 : What is the maximum acceleration a car can undergo if the coefficient of static friction between the tires and the ground is 0.82? Question # 2 : A 1.5-kg block rests on top of a 7.5kg block. The cord and pulley have negligible mass, and there is no significant ...
May 7, 2012 by ericka

Physics
A block of mass m1 is on top of a block of mass m2. Block 2 is connected by an ideal rope passing through a pulley to a block of unknown mass m3 as shown. The pulley is massless and frictionless. There is friction between block 1 and 2 and between the horizontal surface and ...
June 22, 2013 by XYZ

physics
1.If a block weighs 30 pounds and has a static friction of .7 and a sliding friction of .55 and Fn=Fw a. How much force must be applied to just cause motion? b. Once motion has begun what force must be maintained to cause constant velocity motion? 2.A plank is tilted slowly to...
January 26, 2008 by Charles

Physics-Mechaincs
The suspended 2.29 kg mass on the right is moving up, the 1.3 kg mass slides down the ramp, and the suspended 7.7 kg mass on the left is moving down. There is friction between the block and the ramp. u=0.15 The acceleration of gravity is 9.8 m/s2 . The pulleys are massless and...
September 24, 2010 by Genevieve

physics 204
1.If a block weighs 30 pounds and has a static friction of .7 and a sliding friction of .55. a. How much force must be applied to just cause motion? b. Once motion has begun what force must be maintained to cause constant velocity motion? 2.A plank is tilted slowly to an angle...
January 26, 2008 by Charles

physics
A block of mass 0.941 kg is kept at rest as i compresses a horizontal mass-less spring (K=87.5 N/m) by 9.91 cm. As the block is released, it travels 0.528 m on a rough horizontal surface before stopping. The acceleration of gravity is 9.8 m/s^2. Calculate the coefficient of ...
November 28, 2015 by luma

Physics
A 60 kg block slides along the top of a 100 kg block with an acceleration of 3.0 m/s2 when a horizontal force F of 320 N is applied. The 100 kg block sits on a horizontal frictionless surface, but there is friction between the two blocks. (a) Find the coefficient of kinetic ...
October 12, 2011 by Henry

Physics
A 2.6 kg block slides down a 25° inclined plane with constant acceleration. The block starts from rest at the top. At the bottom, its velocity is 0.80 m/s. The incline is 1.6 m long. (a) What is the acceleration of the block? m/s2 wb=m*g=2.6*9.8=25.48 fp=25.48sin25=10.77n Fn=...
October 16, 2014 by Miah

physics
A 2.5-kg block slides down a 17.0° inclined plane with constant acceleration. The block starts from rest at the top. At the bottom its velocity reaches 0.70 m/s. The length of the incline is 1.7 m. What is the acceleration of the block? What is the coefficient of friction ...
November 1, 2011 by Eddie

physics
Two blocks are connected by a lightweight cord that passes over a frictionless, massless pulley. The bottom block has a mass of 2.00 kg and the top block has mass 0.500 kg. The coefficient of kinetic friction at each sliding surface is equal to 0.10. The two blocks are release...
February 17, 2015 by Cali

physics
A block of mass m1 = 3.08 kg on a friction less plane inclined at angle θ = 32.3° is connected by a cord over a massless, frictionless pulley to a second block of mass m2 = 2.51 kg hanging vertically (see the figure). (a) What is the acceleration of the hanging block (...
April 8, 2015 by Akashdeep Singh

physics
A block of ice at 0°C whose mass initially is m = 12.5 kg slides along a horizontal surface, starting at a speed vo = 4.10 m/s and finally coming to rest after traveling a distance d = 10.07 m. Compute the mass of ice melted as a result of the friction between the block and ...
December 8, 2009 by AK

physics
As shown in the figure, a block of mass M1 = 0.470 kg is initially at rest on a slab of mass M2 = 0.850 kg, and the slab is initially at rest on a level table. A string of negligible mass is connected to the slab, runs over a frictionless pulley on the edge of the table, and ...
October 17, 2011 by Jimmy

physics
A 2.6 kg block slides down a 25° inclined plane with constant acceleration. The block starts from rest at the top. At the bottom, its velocity is 0.75 m/s. The incline is 1.6 m long. (a) What is the acceleration of the block? (b) What is the coefficient of friction?

Physics
A block of mass m1 is connected to an empty bucket of mass 1.35 kg by a cord over a frictionless pulley. The coefficient of the static friction between the table and the block is 0.45 and the coefficient of kinetic friction between the table and the block is 0.32. Water is ...
May 2, 2011 by Mawuli

physics
A block slides down a rough plane. The plane makes an angle of 60 degrees with the horizontal, the weight of the block is 5.0N and the coefficient of kinetic (dynamic) friction between the block and the plane is 0.30. 1) determine the magnitude of the frictional force acting ...
October 4, 2006 by blacksheep

Physics
I've asked a similar qustion earlier and now I think I have drawn the correct free body diagram and go about solving the problem. The only thing is I do not know how to solve it. a block (mass m1) on a smooth horizontal surface, connected by a thin cord that passes over a ...
July 14, 2009 by Physics

maths
A block of mass 20kg resting on a horizontal force 50N.If the coefficient of friction between the table and the block is 0.45,calculate the acceleration with which it moves
November 27, 2011 by Kingsley

physics
A block of mass 10kg is pulled horizontally by a force of 75N that makes an angle of 37° to the horizontal whose coefficient of friction is 0.4 . what is the acceleration of the block
January 18, 2015 by Eyosias

PHYSICS
A block with mass m1 = 9.0 kg is on an incline with an angle θ = 32.0° with respect to the horizontal. For the first question there is no friction, but for the rest of this problem the coefficients of friction are: μk = 0.28 and μs = 0.308. To keep the mass ...
February 2, 2013 by HIBA

physics
A block of mass m slides down an incline of mass M. As shown, th acceleration of the block is a. The coefficient of kinetic friction between the block and the incline is ì1, while the coefficient of kinetic friction between the incline and ground is ì2. If the incline stays ...
January 22, 2013 by Calista

Physics
A force F acts to the right on a 4.81 kg block. A 2.53 kg block is stacked on top of the 4.81 kg block and can slide on it with a coefficient of friction of 0.2 between the blocks. The table has a coefficient of friction of 0.23. The acceleration of gravity is 9.8 m/s 2 . The ...
September 28, 2014 by Ahmed

general physics
A string going over a massless frictionless pulley connects two blocks of masses 5.9 kg and 9.5 kg. the 5.9 kg block lies on a 31 ◦ incline; the coefficient of kinetic friction between the block and the incline is µ = 0.22. The 9.5 kg block is hanging in the air. The 9.5...
February 20, 2016 by David

physics
a block of mass 5 kg is position at angle 45 degree ,a force of 10 newton is applied to the block parallel to the ground. is the coefficient of kinetic friction is 0.5 , calculate its acceleration?
October 9, 2015 by Amna

Physics
A block whose weight is 34.0 N rests on a horizontal table. A horizontal force of 27.2 N is applied to the block. The coefficients of static and kinetic friction are 0.600 and 0.472, respectively. Will the block move under the influence of the force, and, if so, what will be ...
November 7, 2013 by Samantha

Physics
A block of mass 3m is placed on a frictionless horizontal surface, and a second block of mass m is placed on top of the first block. The surfaces of the blocks are rough. A constant force of magnitude F is applied to the first block as shown in the figure. (a) Construct free-...
October 17, 2012 by Brette

PHYSICS
block 3M slides downward without friction. The string connecting blocks 3M and M is ideal (that is, its mass can be neglected and it is not stretchable). The pulley, a uniform solid disc of mass M and radius r , rotates without slipping. Find the acceleration of block 3M.
December 6, 2013 by Ramana

physics
A 2.09 kg block is placed on top of a 10.9 kg block. A horizontal force of F = 63.3 N is applied to the 10.9 kg block, and the 2.09 kg block is tied to the wall. The coefficient of kinetic friction between all moving surfaces is 0.117. There is friction both between the masses...
October 10, 2010 by shel

Physics
A 6.40 kg block rests on a 12.5 kg block as shown in the diagram. The interface between the lower mass and the table is frictionless, but there is friction (static friction μS and kinetic friction μK) between the two blocks. A horizontal force F r acts on the UPPER ...
February 24, 2013 by Meder

Physics
A block with mass m1 on a plane inclined at angle  to the horizontal is connected to a second hanging block with mass m2 by a cord passing over a small, frictionless pulley, as shown. The coefficient of static friction is us and the coefficient of kinetic friction is ...

Physics.
A block of mass 3m is placed on a frictionless horizontal surface, and a second block of mass m is placed on top of the first block. The surfaces of the blocks are rough. A constant force of magnitude F is applied to the first block. a) Identify the horizontal force that ...
October 16, 2012 by Kelsey

science
1a)A block of mass=100kg is tied to a donkey that moves with constant acceleration of 20cm/s^2 up a 30 degree incline. What is the force with which the donkey pulls on the block parallel to the incline? the coefficient of kinetic friction between the incline and the block is 0...
May 5, 2010 by Anonymous

physics
I am trying to study for my exam i have tomorrow and this type of problem keeps giving me trouble can someone please help me:: A 3.24 kg block located on a horizontal frictionless floor is pulled by a cord that exerts a force F=11.8N at an angle theta=23.0degrees above the ...
January 30, 2012 by Amanda

A block of mass 2.62 kg is kept at rest as it compresses a horizontal massless spring(k = 141 N=m) by 15.3 cm. As the block is released, it travels 0.627 m on a rough hori- zontal surface before stopping. The acceleration of gravity is 9.8 m/s2 :Calculate the coe±cient of ...
March 4, 2007 by kitt

physical
A block with mass m1 on a plane inclined at angle ƒÑ to the horizontal is connected to a second hanging block with mass m2 by a cord passing over a small, frictionless pulley, as shown. The coefficient of static friction is Us ƒÝ s and the coefficient of kinetic friction is Uk...
April 5, 2012 by Lebza

Physics
A 40kg block is pushed along a level surface with a 200 N force at an angle of 35 degrees below the horizon. The coefficient of kinetic friction between the block and the surface is 0.15. What is the normal force acting on the block? What is the force of friction? What is the ...
February 5, 2012 by Krystal

Anyone ??? Physics
In the figure below, block 1 of mass m1 = 3.0 kg and block 2 of mass m2 = 1.0 kg are connected by a string of negligible mass. Block 2 is pushed by force F of magnitude 30 N and angle θ = 20°. The coefficient of kinetic friction between each block and the horizontal ...
October 26, 2012 by Josh36

1. Pages:
2. 1
3. 2
4. 3
5. 4
6. 5
7. 6
8. 7
9. 8
10. 9
11. 10
12. 11
13. 12
14. 13
15. 14
16. 15
17. Next>>