Sunday
December 4, 2016

Search: 2 masses, pulley on a frictionless incline

Number of results: 6,091

physics
In the frictionless apparatus m1=1.7kg What is m2 if both masses are at rest
April 11, 2010 by Anonymous

physics
A 5.11-kg pendulum bob, at a height of 0.730 m above the floor, is released and swings down to the ground where it collides elastically with a 2.29 kg block initially at rest. The block then slides up a 31.0° incline. Find how high up the incline the block will slide if (a) ...
April 3, 2013 by patt

Physics
If two different masses have the same kinetic energy, their momenta are: a. proportional to the squares of their masses b. proportional to their masses c. proportional to the square roots of their masses d. inversely proportional to their masses e. inversely proportional to ...
October 31, 2011 by Anonymous

physics
1. The efficiency of a squeaky pulley system is 73 percent. The pulleys are used to raise a mass to a certain height. What force is exerted on the machine if a rope is pulled 18.0 m in order to raise a 58 kg mass a height of 3.0 m? Answer: 13.24 N? A person lifts a 950 N box ...
January 17, 2007 by anonymous

physics
Two blocks each with weight w are held in place on a frictionless incline. In terms of w ans the angle theda of the incline, calculate the tension in a) the rope connecting the blocks; b) the rope that connects block A to the wall? a) it was wsin(theda) b) it was 2wsin(theda) ...
November 16, 2006 by Chris

physics
need help with this question please a 1kg block starts at rest and slides down the incline. the coefficient of friction between the incline and the block is 0.1. The height of the incline is 2m, and the angle is 30 degrees. use energy consideration to find the block's speed at...
November 15, 2009 by sammeh

physics
Have a hoop (15kg) with a radius of 1.5m. Angular speed is 5 rad/s. What is the total KE possessed by the hoop? The hoop begins to climb an incline which is at a 15 degree angle. Measured along the incline, how far up the incline does it rool before stopping if the incline has...
December 14, 2013 by Meg

Physics
A block of weight = 25.0 sits on a frictionless inclined plane, which makes an angle = 34.0 with respect to the horizontal, as shown in the figure. A force of magnitude = 14.0 , applied parallel to the incline, is just sufficient to pull the block up the plane at constant ...
October 17, 2010 by Nikohl

Physics
A block of weight = 25.0 N sits on a frictionless inclined plane, which makes an angle = 34.0 with respect to the horizontal, as shown in the figure. A force of magnitude = 14.0 N, applied parallel to the incline, is just sufficient to pull the block up the plane at constant ...
October 17, 2010 by Eden

physics
A block of mass m1 = 3.56 kg on a frictionless plane inclined at angle θ = 34.1° is connected by a cord over a massless, frictionless pulley to a second block of mass m2 = 2.72 kg hanging vertically (see the figure). (a) What is the acceleration of the hanging block (...
March 17, 2016 by krals

Phyics
How far does a 5-kg block with an initial speed of 3 m/s slide up a frictionless 28° incline plane?
February 17, 2013 by Amy

Physics
How fast would a 4.8 kg object slide down a frictionless incline of 10.3 degrees?
January 7, 2015 by Paige

College Physics
Two crates are connected by a massless rope that passes over a pulley. If the crates have mass 33 kg and 82 kg, find their acceleration. If the system begins at rest, with the more massive crate a distance 12 m above the floor, how long does it take for the more massive crate ...
October 13, 2014 by Shannon

physics
A block of mass m1=3.70kg on a frictionless plane inclined at angle 30 deg is connected by a cord over a massless, frictionless pulley to a second block mass m2= 2.30kg. What is... a) The magnitude of the acceleration of each block? b) The direction of the acceleration of the ...
January 12, 2016 by Maryam

physics
1.Three masses, m1, m2, and m3, are lying on a plane without friction and are connected by a string. A force F is applied to the mass m1 so that the whole system accelerates along a straight line. What is the tension of the string T between the masses m1 and m2? What is the ...
May 3, 2011 by Sandhya

Physics
A box is sliding up an incline that makes an angle of 17.0° with respect to the horizontal. The coefficient of kinetic friction between the box and the surface of the incline is 0.180. The initial speed of the box at the bottom of the incline is 1.40 m/s. How far does the box...
September 17, 2007 by NHS

Physics
A box is sliding up an incline that makes an angle of 12.0° with respect to the horizontal. The coefficient of kinetic friction between the box and the surface of the incline is 0.180. The initial speed of the box at the bottom of the incline is 1.30 m/s. How far does the box...
October 21, 2011 by Peter

Physics
A box is sliding up an incline that makes an angle of 13.0° with respect to the horizontal. The coefficient of kinetic friction between the box and the surface of the incline is 0.180. The initial speed of the box at the bottom of the incline is 1.80 m/s. How far does the box...
October 29, 2012 by Anonymous

bowie
A box is sliding up an incline that makes an angle of 21.8° with respect to the horizontal. The coefficient of kinetic friction between the box and the surface of the incline is 0.170. The initial speed of the box at the bottom of the incline is 3.48 m/s. How far does the box...
December 16, 2015 by trish

physics
A box is sliding up an incline that makes an angle of 21.8° with respect to the horizontal. The coefficient of kinetic friction between the box and the surface of the incline is 0.170. The initial speed of the box at the bottom of the incline is 3.48 m/s. How far does the box...
December 16, 2015 by trish

physics
A box is sliding up an incline that makes an angle of 21.8° with respect to the horizontal. The coefficient of kinetic friction between the box and the surface of the incline is 0.170. The initial speed of the box at the bottom of the incline is 3.48 m/s. How far does the box...
December 16, 2015 by trish

PHYSICS
A box is sliding up an incline that makes an angle of 21.8° with respect to the horizontal. The coefficient of kinetic friction between the box and the surface of the incline is 0.170. The initial speed of the box at the bottom of the incline is 3.48 m/s. How far does the box...
December 16, 2015 by James

physics
A massless string runs around two massless, frictionless pulleys. An object with mass m = 20 kg hangs from one pulley. A force F is exerted on the free end of the string to lift the object at a constant speed by a distance of 2.3 m. What is the work done on the object by the ...
November 16, 2009 by m2a

physics
Two crates are connected by a massless rope that passes over a pulley as shown in the figure below. If the crates have mass 32 kg and 80 kg, find their acceleration. If the system begins at rest, with the more massive crate a distance 11 m above the floor, how long does it ...
February 21, 2009 by kj

Physics
A box is sliding up an incline that makes an angle of 15.0 degrees with respect to the horizontal. The coefficient of kinetic friction between the box and the surface of the incline is 0.180. The initial speed of the box and the surface of the incline is 1.50 m/s. How far does...
December 8, 2012 by Matoro

Physics
A costant force F iss applied to a crate of mass 25kg to move it upwards along a frictionless inclined plane, when it reaches point A, its speed is 12m.s and 10,8 m,s when it reaches point B which is 3,5m futher up the incline. 5,1 give a reason why the normal force does no ...
March 31, 2015 by Allen C

Physics
An object of mass M = 1,114 g is free to move along a horizontal, frictionless surface. This object is further connected to a second object with a mass of m = 811 g by means of a massless string that extends around a massless, frictionless pulley. Find the tension of the ...
October 10, 2009 by Lisa

Physics
A bullet of mass m= 2.50×10-2kg is fired along an incline and imbeds itself quickly into a block of wood of mass M= 1.60kg. The block and bullet then slide up the incline, assumed frictionless, and rise a height H= 1.45m before stopping. Calculate the speed of the bullet just...
December 12, 2014 by katherine

Physics HELP
Two blocks of masses m1 = 6 kg and m2 = 6 kg are on either side of the wedge shown in the figure above. Find their acceleration and the tension in the rope. Ignore friction and the pulley.
October 7, 2014 by Sabrina

uhar
two blocks a and b are connected by a cord passes over a frictionless pulley. the mass of a is 1.2 kg and the magnitude of acceleration is 3.6
March 21, 2013 by ali

Physics
If an incline has a difference in height from one end to the other of 17.8 cm and has a length along the incline of 1.19 m, what is the angle that the incline makes with the horizontal reference surface?
February 15, 2014 by Christina

Work energy
Question Details Three masses m1= 5.0 kg ; m2= 10.0 kg ; m1= 15.0 kg are attached by a strings over frictionless pulleys. The horizontal surface exerts a force of friction of 30N on m2. If the system is released from rest, use energy concepts to find the speed of m2 after it ...
November 19, 2006 by Harry

Physical science
A trolley of mass of 20kg rolls down an incline from rest. The top of the incline is 10m above the ground. The trolley experiences a constant frictional force of 25N while it rolls down the incline. The velocity attained by the trolley at the bottom of the incline is 12m/s. ...
April 16, 2015 by Ryeth

KINEMATICS (PHY)
A pulley of mass mp , radius R , and moment of inertia about the center of mass Ic=12mpR2 , is suspended from a ceiling. The pulley rotates about a frictionless axle. An inextensible string of negligible mass is wrapped around the pulley and it does not slip on the pulley. The...
November 12, 2013 by rickross

Physics
A horizontal force of 100 N pushes a 12kg block up a frictionless incline that makes an angle 25degrees with the horizontal. What is the normal force that the incline exerts on the block and what is the acceleration of the block? I found part (a) which is the normal force. It ...
September 20, 2010 by Anonymous

physics
The two masses in the Atwood's machine shown in the figure are initially at rest at the same height. After they are released, the large mass, , falls through a height and hits the floor, and the small mass, , rises through a height . Find the speed of the masses just before ...
July 1, 2010 by meera

11th grade
A box is sliding up an incline that makes an angle of 16.0° with respect to the horizontal. The coefficient of kinetic friction between the box and the surface of the incline is 0.180. The initial speed of the box at the bottom of the incline is 1.30m/s. How far does the box ...
September 20, 2010 by shan lalani

Physics Classical Mechanics
A pulley of mass mp , radius R , and moment of inertia about the center of mass Ic=12mpR2 , is suspended from a ceiling. The pulley rotates about a frictionless axle. An inextensible string of negligible mass is wrapped around the pulley and it does not slip on the pulley. The...
November 7, 2013 by A

PHYSICS
A light spring (k= 130 N/m) is compressed 15 cm between two masses (1.2 kg and 2.4 kg) on a frictionless surface. The system is released and the masses fly apart. Which mass will have the larger magnitude momentum? Why? Which mass will have more kinetic energy? What is the ...
February 23, 2016 by Camille

physics
A skate boarder traveling at a constant speed of 22 m/s on a road comes to a straight incline with a constant slope (do not use g for incline). While going up the incline, the skater has constant deceleration. If she is 16m up the incline after 12.0 s A) what is the ...
November 20, 2016 by bob

rotations2
A hollow cylinder (hoop) is rolling on a horizontal surface at speed v = 1.85 m/s when it reaches a 23.5° incline.How far up the incline will it go? How long will it be on the incline before it arrives back at the bottom?
March 11, 2010 by Anonymous

PHYSICS
On a horizontal frictionless table, masses A and B (3 kg, 6 kg) slide to the right and left, respectively. They have speeds of 3 m/s and 1 m/s, respectively. The two masses collide, and bounce off each other. After the collision, they travel in opposite directions at speeds of...
October 15, 2008 by kelsey

physics
A solid sphere of weight 36.0 N rolls up an incline at an angle of 30.0o. At the bottom of the incline the center of mass of the sphere has a translational speed of 4.90 m s-1. Isphere = 2/5mr^2. What is the kinetic energy of the sphere at the bottom of the incline? How far ...
November 13, 2008 by kim

Trigo
A belt connects two pulley, one of radius 5 inches and the other 18 inches. Through how many revolutions will the smaller pulley make if the larger pulley makes 6 rev?
August 17, 2016 by Cjanito

Physics
A pulley system os being used to raise a load. The rope begins at the ceilings, goes down, round a pulley on the load, up to a pulley on the ceiling, back down and around a second pulley on the load, and up to a sheave (a motor driven pulley) on the ceiling. The rope is ...
July 15, 2012 by Alex

Physics
A 4 kg block slides down a frictionless incline making an angle of 60° with the horizontal. (a) What is the total work done on the block when the block slides 2 m (measured along the incline)? (b) What is the speed of the block after it has slid 1.5 m if it starts from rest...
November 3, 2010 by Jenni

Maths
The pulley in the jib of a crane has a diameter of 56cm. Find: a) The circumference of the pulley b) The number of revolutions turned by the pulley when the crane raises a load through a vertical height of 44m.
November 8, 2014 by Hyaa

physics
a 5kg suitcase slides 2m down a frictionless ramp incline at 45 degress. How fast is it going at the bottom?
January 19, 2011 by Luke

physics
a 65 kg object is pulled at a constant velocity up an incline w/ a force of 95 N parallel to the incline. Assuming that the difference between the work output and input is work required to overcome friction, what is the force of friction along the incline (the length of the ...
April 8, 2011 by Jun

Physics
A cart of mass M1 = 6 kg is attached to a block of mass M2 = 3 kg by a string that passes over a frictionless pulley. The system is initially at rest and the table is frictionless. After the block has fallen a distance h = 1 m: What is the work Ws done on the cart by the ...
June 13, 2006 by Jamila

physics (tension in strin and acceleration of syst
two bodies of 9kg and 5.7kg are attached with ends of a string which passes over a pulley so that both bodies move vertically starting from rest at equal heights,lighter body hits pulley in 1.2sec.find length of string and speed with which it hits pulley.diameter of pulley is ...
August 21, 2011 by ahsan asghar

physics
A block slides on a rough 45 degree incline .the coefficient of friction the block and incline is µk. what is the ratio of acceleration when the block accelerates down the incline to the acceleration when the block is projected up the incline?
December 20, 2014 by awash

physics
For the system on the diagram, the string is massless, and slides over the pulley without friction. The masses are m1 = 5.7kg and m2 = 6.4kg. what is the magnitude of the acceleration of the system is ( in m/s2)
May 28, 2014 by jake

Physics
Calculate the tension in the cable connecting the two masses. Assume all surfaces are frictionless.
June 10, 2014 by Corey Brown

Physics
Two boxes are connected by a light string that passes over a light, frictionless pulley. One box rests on a frictionless ramp that rises at 30° above the horizontal (see the Figure below), and the system is released from rest. (a) Which way will the 50kg box move, up the ...
March 4, 2016 by David

Physics 2
Two boxes are connected by a light string that passes over a light, frictionless pulley. One box rests on a frictionless ramp that rises at 30° above the horizontal (see the Figure below), and the system is released from rest. (a) Which way will the 50kg box move, up the ...
March 4, 2016 by David

physics- energy and work
To push a 33.0-kg crate up a frictionless incline angled at 27.0° to the horizontal, a worker exerts a force of 388 N parallel to the incline. The crate moves a distance of 4.10 m. What work is done on the crate by the worker? What work is done on the crate by the weight of ...
November 12, 2014 by Hi

Physics
a block of mass m= 15.6kg is to be pushed with force F a distance of D=5.65m along an incline so that it s raised a distance h=3.86m in the process.Assuming frictionless surfaces. Determine: A) The work done by the force F parallel to the incline to pst the block up at ...
February 21, 2013 by nemo

physics
A sled is initially given a shove up a frictionless 32.0 incline. It reaches a maximum vertical height 1.50 higher than where it started.
November 15, 2011 by Anonymous

Physics
a horizontal force Pushes a 80 N box up a frictionless 37 degree incline at a constant velocity as shown.? What is the magnitude of P in newtons?
May 5, 2013 by Naveed Khan

Physics(Please help)
1) A box is sliding up an incline that makes an angle of 14.0 ° with respect to the horizontal. The coefficient of kinetic friction between the box and the surface of the incline is 0.176. The initial speed of the box at the bottom of the incline is 3.72 m/s. How far does the...
May 29, 2012 by Hannah

chm
Why are the atomic masses listed in the periodic table not whole numbers? Answer Scientists have yet to make the precise measurements. That would be too much of a coincidence. ??>>The atomic masses are average atomic masses. or >>Today's instruments are able to ...
February 23, 2013 by jj

physic 2210
A pulley (a soild disk) with mass 2kg and radius 0.3 m is attached by massless rope to two blocks of masses m1=1kg and m2=3 kg. what is the acceleration of block 1 after the system is realeased from rest?
November 24, 2014 by john roylance

physics
A crate of mass m (=40 kg) is placed at rest on a (frictionless) inclined plane, which has an angle (= 30o) above horizontal. a.) The force of gravity on the crate is: b.) The normal force on the crate is: size: N c.) The net force on the crate is: size: N direction: d.) How ...
September 23, 2008 by kelsey

Physics
In the figure below, m1 = 3.1 kg, m2 = 5.8 kg, and the coefficient of kinetic friction between the inclined plane and the 3.1-kg block is μk = 0.27. Find the magnitude of the acceleration of the masses and the tension in the cord. The incline is at at 30 angle.
October 12, 2011 by Jimmy

physics
Two bodies of mass 3kg and 4kg are suspended at the ends of massless string passing over a frictionless pulley .the acceleration system is
December 25, 2014 by prakhar

Physics
A skier is gliding along at 5.0{\rm m/s} on horizontal, frictionless snow. He suddenly starts down a 15{\rm ^{\circ}} incline. His speed at the bottom is 15{\rm m/s} .
October 15, 2012 by Denika

Physics
A solid sphere of mass 2.07kg rolls up an incline with an inclination angle of 24.40°. At the bottom of the incline, the center of mass of the sphere has a translational speed of 2.80m/s. a) What is in J, the linear kinetic energy of the sphere at the bottom of the incline? b...
November 4, 2014 by Serena

physics
A 1.2kg object is placed on a frictionless table and is attached to a hanging mass using a light string over a frictionless pulley in a fletcher's trolley arrangement. The 1.20kg object accelerates along the table at 2.31m/s while the hanging object accelerates down at the ...
April 3, 2013 by maddi

physics
Question Details: A crate of mass1 on a frictionless inclined plane is attached to another crate, mass2 by a massless rope. The rope passes over an ideal pulley so the mass m2 is suspeneded in air. The plane is inclined at an angle 36.9. Use conservation of energy to find how ...
November 11, 2008 by JP

Physics.. last one.
Four balls are suspended by cords. The longer, top cord loops over a frictionless pulley and pulls with a force of magnitude 95 N on the wall to which it is attached. The tensions in the shorter cords are T1 = 56.0 N (between ball A & B), T2 = 46.7 N (between ball B & C), and ...
February 6, 2007 by COFFEE

Physics
A 500g block is shot up a 25degree incline with an initial speed of 200cm/s. Determine the distance, d, that it will go up the incline if the coefficient of kinetic friction between it and the incline is 0.150? Use Entergy considerations to solve the problem.
May 2, 2013 by Anonymous

physics
The system shown in the figure below consists of a mass M = 3.5-kg block resting on a frictionless horizontal ledge. This block is attached to a string that passes over a pulley, and the other end of the string is attached to a hanging m = 2.2-kg block. The pulley is a uniform...
January 22, 2015 by Johnathan

Physics
A 70 kg person stands on a 30 kg platform and pulls on a massless rope with a force of 400 N. The rope passes around a pulley attached to a support (roof), and then around a second pulley attached to the platform before being anchored to the support (roof). All sections of the...
January 22, 2013 by Adam

physics
A 3.00 kg block starts from rest at the top of a 33.0° incline and slides 2.00 m down the incline in 1.75 s. Find the coefficient of kinetic friction between the block and the incline
October 22, 2011 by Johnna

physics
Two blocks of masses m1=5 and m2=6 kg are on either side of the wedge shown below. Assume the surface and the pulley are frictionless. Find A)the direction this system will accelerate B) the acceleration of m1 and m2 C) the tension in the rope did I do this right? how do I ...
November 24, 2015 by Spice

physics
Two blocks of masses m1=5 and m2=6 kg are on either side of the wedge shown below. Assume the surface and the pulley are frictionless. Find A)the direction this system will accelerate B) the acceleration of m1 and m2 C) the tension in the rope did I do this right? how do I ...
November 24, 2015 by Spice

physics
A 18 kg object and a 6 kg object are hanging over a frictionless pulley. What is the acceleration of the system to the nearest tenth?
November 9, 2009 by JUan

Physics
A 50kg mass and a 85kg mass are hung over a frictionless pulley what is the acceleration of the system
May 26, 2014 by Sam

physics
A 50 kg block is on a 30 degree incline. The coefficient of friction between the block and the incline 0.05. If it is given an initial velocity of 10 m/s up the incline, how far will it travel until it stops?
October 19, 2008 by Fred

PHYSICS
A 50 kg block is on a 30 degree incline. The coefficient of friction between the block and the incline 0.05. If it is given an initial velocity of 10 m/s up the incline, how far will it travel until it stops?
October 19, 2008 by Bartholomew

Peter
A 200 N/m, 5 m spring on a 20 degree incline is compressed 2.3 m and a 5 kg block is placed on it. If we neglect friction, how far up the incline will the block travel? How fast will it be traveling when it is 0.2 m up the incline?
January 15, 2009 by Physics

Physics
A bowling ball is rolled up an incline. If the ball has a speed of 12 m/s at the base of the incline, to what height h on the incline will the center mass travel?
October 18, 2011 by Anon

Physics
A block of mass m1= 3.70kg rests on a 30degree incline and is held stationary by a mass of 1.3kg hanging vertically over a frictionaless pulley at the top. Calculate the value of u (coefficent of friction)
September 8, 2016 by james

Physics
A block of mass 5.53 kg lies on a frictionless horizontal surface. The block is connected by a cord passing a. over a pulley to another block of mass 2.25 kg which hangs in the air. Assume the cord to be light (massless and weightless) and unstretchable and the the pulley to ...
February 21, 2014 by Emeera

Still Physics...
A 200 N/m, 5 m spring on a 20 degree incline is compressed 2.3 m and a 5 kg block is placed on it. If we neglect friction, how far up the incline will the block travel? How fast will it be traveling when it is 0.2 m up the incline?
January 14, 2009 by Phil

Physics
A sled is initially given a shove up a frictionless 24.0° incline. It reaches a maximum vertical height 1.10 m higher than where it started. What was its initial speed?
March 3, 2010 by Luricela

Physics
A sled is initially given a shove up a frictionless 24.0° incline. It reaches a maximum vertical height 1.10 m higher than where it started. What was its initial speed?
March 3, 2010 by Luricela

phy
A sled is initially given a shove up a frictionless 27.0° incline. It reaches a maximum vertical height 1.45 m higher than where it started. What was its initial speed?
September 26, 2010 by mas

AP Physics
a 45 kg object slides down an uneven frictionless incline from rest without rotating. What is its speed after it travels 2.5 meters vertically
October 30, 2010 by Asim

physics
A block of mass 3.62 kg lies on a frictionless horizontal surface. The block is connected by a cord passing over a pulley to another block of mass 7.8 kg which hangs in the air, as shown. Assume the cord to be light (massless and weightless) and unstretchable and the pulley to...
November 15, 2012 by alice

physics
a body of mass2kg is lying on a rough inclined surface of inclination 30 degree .find the magnitude of the force parellel to the incline needed to make the block move .1)up the incline .2)doun the incline. cofficent of static friction is 0.2
November 16, 2011 by Anonymous

physics
A block is at rest on the incline shown in the figure. The coefficients of static and kinetic friction are µs = 0.4 and µk = 0.34, respectively. The acceleration of gravity is 9.8 m/s. What is the largest angle which the incline can have so that the mass does not slide down ...
September 22, 2015 by king

Physics
A 3.30-kN piano is lifted by three workers at a constant speed to an apartment 28.8 m above the street using a pulley system fastened to the roof of the building. Each worker is able to deliver 197 W of power, and the pulley system is 75.0% efficient (so that 25.0% of the ...
June 17, 2012 by Kristin

math
the constant angular acceleration of pulley is 4rad/s2, angular speed 3 rad/s, determine the radius of pulley if the total acceleration of a print on the rim of the pulley is 3.5m/s2
July 31, 2012 by ajay

Physics
A block is placed on a frictionless ramp at a height of 14.5 m above the ground. Starting from rest, the block slides down the ramp. At the bottom of the ramp, the block slides onto a frictionless horizontal track without slowing down.At the end of the horizontal track, the ...
November 13, 2014 by Sam

Physics
A 4 kg bundle starts up a 30o incline with 128 J of kinetic energy. How far will it slide up the incline if the coefficient of friction between bundle and incline is 0.30? Pls help me solve this, I don't know what formula to use...
November 22, 2014 by Jeiffer

Physics
A mass of 14 kg is moving at a speed of 39 m/s at the bottom of incline which is inclined at an angle of 51.6 degrees. The incline has friction and the coefficient of kinetic friction is 0.6. The mass travels up the incline and stops due to both gravity and friction and then ...
October 17, 2014 by Kimmy

Physics
A box slides down an inclined plane with an acceleration that is precisely two-thirds what it would have been if the slide had been frictionless. Calculate the angle of the incline if the coefficient of kinetic friction of the rough incline is 0.29 I know I have to use ...
September 28, 2016 by Bex

another rotation
A hollow cylinder (hoop) is rolling on a horizontal surface at speed v = 1.85 m/s when it reaches a 23.5° incline.How far up the incline will it go? How long will it be on the incline before it arrives back at the bottom? Again, I am so confused about these problems and how ...
March 11, 2010 by Liz

  1. Pages:
  2. <<Prev
  3. 1
  4. 2
  5. 3
  6. 4
  7. 5
  8. 6
  9. 7
  10. 8
  11. 9
  12. 10
  13. 11
  14. 12
  15. 13
  16. 14
  17. 15
  18. Next>>