Wednesday
April 23, 2014

# Search: 1.00L at a pressure of 0.988 atm

Number of results: 237

chemistry
If 2.00L of nitrogen and 5.00L of hydrogen were allowed to react, how many liters of NH3 (g) could form? The condition of the gas collected were 745 mmHg and 22C.
Monday, April 12, 2010 at 9:22pm by Amanda

CHEMISTRY
HX) = 0.600 mol/3.00L = 0.2 M (H2) = 0.150 mol/3.00L = 0.05M (0.2)^2/0.05)(24.4)=0.327
Wednesday, October 26, 2011 at 2:33pm by HELPP ME

chemistry
Consider a sample containing 2.00 mol of a monatomic ideal gas that undergoes the following changes from State A to State D: State A PA=10.5atm, VA=10.00L State B PB=10.5atm, VB=5.00L State C PC=24.5atm, VC=5.00L State D PD=24.5atm, VD=22.00L Assume that the external pressure ...
Saturday, October 4, 2008 at 11:27pm by Jane

intro to chemistry
The air in a 5.00L tank has a pressure of 1.20atm. What is the new pressure of the air when the air is placed in tanks that have the following volumes, if there is no change in temperature? A. 1.00L B. 2500ml C. 750ml
Monday, October 11, 2010 at 9:06am by david

chemistry
A mole of reacts at a constant pressure of 43.0atm via the reaction Before the reaction, the volume of the gaseous mixture was 5.00L . After the reaction, the volume was 2.00L . Calculate the value of the total energy change, , in kilojoules.
Sunday, October 19, 2008 at 1:32pm by jessica

chemistry
2) Suppose you have 5.00g of powdered magnesium metal, 1.00L of 2.00M potassium nitrate solution, and 1.00L of a 2.00M silver nitrate solution. a. Which one of the solutions will react with the magnesium powder?
Sunday, March 17, 2013 at 1:04pm by Anonymous

chemistry
For dilution problems (preparing a weaker solution from a stronger stock solution) use: V1M1 = V2M2 (1.00M)(V1) = (0.240M)(2.00L) Solving for V1, V1 = (0.240M)(2.00L) / (1.00M) = ? The second part, I don't quite follow.
Wednesday, March 4, 2009 at 6:17pm by GK

chemistry
12.00L x 20 mm = 2.00L x ?mm ?mm = 12.00 x 20/2 = 120 mm. The key must be wrong.
Tuesday, December 4, 2012 at 6:46pm by DrBob222

Chem 2 help
0.800 mol/2.00L = 0.400M ........2SO3 <==> 2SO2 + O2 I.....0.400M........0.....0 C.......-2x........2x.....x E.....0400-2x......2x.....x x = O2 = 0.140mol/2.00L = 0.07M Then 2x = 0.140M = (SO2) and 0.400-0.140 = 0.26M = (SO3) Substitute these into the Kc expression and ...
Tuesday, April 1, 2014 at 12:39am by DrBob222

Chemistry
If the initial pressures of the H2 and N2 in the flasks in the figure below were instead 350. torr and 160. torr, respectively, what would be the final pressure after the stopcock is opened? Left side of stopcock= 2.00L H2 Right side of stopcock= 1.00L N2
Wednesday, October 10, 2012 at 5:29am by Troy

Chemistry
Samples of neon and helim are placed into separate containers connected by a pniched rubber tube as shown. When the clamp is removed and the gases are allowed to mix, what is the final pressure of the neon? The volume of the tube is negligible. 5.00L, 654 mmHg is Neon. 3.00L,...
Thursday, February 28, 2008 at 5:38pm by Miley

Chemistry
15.0 moles of gas are in a 6.00L tank at 298.15K. Calculate the difference in pressure between methane and an ideal gas under these conditions. The van der Waals constants for methane are a=2.300 L^2*atm/mol^2 and b=0.0430 L/mol. I found the idea gas pressure to be 61.2 atm by...
Thursday, September 13, 2012 at 7:38pm by Lori

Chemistry URGENT
consider the following container of helium at 45C. intially the valve is closed. After the valve is opened what is the pressure of the helium gas. your start points are 2.00 atm and 9.00L. after opening you have 3.oo atm and 3.00L. The answer is 2.25 atm what formula did you ...
Tuesday, April 1, 2014 at 7:57pm by linda

Chemistry Equilibrium
You need to find the arrow keys on your computer and use them. (N2O) = 0.174mol/4.00L = estimated 0.04 (NO2) = 0.337 mol/4.00L = estd 0.08 ...........N2O(g) + NO2(g)==> 3NO(g) I.........0.04.....0.08........0 C.........-x........-x.........3x E.........0.04-x...0.08-x.........
Sunday, April 13, 2014 at 12:04pm by DrBob222

Chemistry
Under an O2(g) pressure of 1.00 atm , 28.31mL of O2 (g) dissolves in 1.00L H2O at 298K. What will be the molarity of O2 in the saturated solution at 298K when the pressure is 3.86atm ? (Assume that the solution volume remains at 1.00L .) I used PV=nRT and found moles of solute...
Monday, February 22, 2010 at 1:56am by Amber

Chemistry
Under an O2(g) pressure of 1.00 atm , 28.31mL of O2 (g) dissolves in 1.00L H2O at 298K. What will be the molarity of O2 in the saturated solution at 298K when the pressure is 3.86atm ? (Assume that the solution volume remains at 1.00L .) I used PV=nRT and found moles of ...

Chemistry
Calculate the partial pressures and total pressure (in atm) exerted by 0.838 mol of methane, 0.184 mol of ethane and 0.755 mol of neon contained in a 4.00 L container at 27 C. PV=nRT for methane (4.00L) X = (0.838 mol)(0.08206 L-atm/mol-K)(300.15 K) X = 5.160 atm PV=nRT for ...
Wednesday, December 23, 2009 at 9:14pm by Anonymous

Chemistry URGENT/DR BOB
Dalton's Law of Partial Pressure consider the following container of helium at 45C. intially the valve is closed. After the valve is opened what is the pressure of the helium gas. your start points are 2.00 atm and 9.00L. after opening the valve you have 3.00 atm and 3.00L. ...
Tuesday, April 1, 2014 at 9:43pm by linda

CHEMISTRY
...........H2 + X2 ==> 2HX equil...0.150.........0.600 Kc = 24.4 = (HX)^2/H2)(X2) Can't you substitute for HX and H2 and solve for X2? (HX) = 0.600 mol/3.00L = ? (H2) = 0.150 mol/3.00L = ? Solve for (X2) = ?M, then moles = M x L
Wednesday, October 26, 2011 at 2:33pm by DrBob222

chem
Water is the solvent and you can assume the density of water is 1.0g/cc. a.) What will be the amount of solute in grams if the volume is 500 mL and the concentration of solution is 15% w/w? The molar mass of the solute is H2SO4, 98.0g/mol b.) What is the molar mass of the ...
Thursday, November 29, 2012 at 10:51am by Angel Locsin

chemistry
Why not g/L? Just 1.80g/2.00L - ?
Thursday, October 20, 2011 at 11:39pm by DrBob222

chemistry 12
sry, a misprint. its: O2+2F2 <--> 2OF2 The question is looking for Kc. 2.50 mo of oxygen and 2.50 mol of fluorine gas are placed in a 2.00L glass container at room temperature. The container is heated to 400K and the following equilbirum is established: O2+2F2 <-->...
Monday, November 20, 2006 at 8:30pm by Natalie

Chemistry
Deuterium Oxide (D2O) is a commonly solvent for NMR spectroscopy. However, it is often contaminated with H2O. To test for residual H2O in D2O , a student took 1.00g of D2O + H2O sample and reacted with Cl2 to give a mixture of HCl and DCl. The HCl and DCl mixture was then ...
Wednesday, September 26, 2012 at 5:34pm by Adam-- Dr Bob, Help!

chemistry
Under an O2(g) pressure of 1.00 atm, 30.9 cm3 of O2(g)at 25C dissolves in 1.00 L H2O at 25C. Assuming that the soln volume remains at 1.00L, what is the Molarity of a saturated O2(aq) soln at 25C when partial pressure O2=1 atm? DRBOB222 said to: Convert 30.9 cc O2 at 25C to ...
Wednesday, August 31, 2011 at 11:20am by Holly

Chemistry
1.006 g/ml 4.7% acetic acid by mass 3.00L
Saturday, February 2, 2013 at 4:21pm by Lisa

Chemistry
How many moles of H2O are in 3.00L of water? (d=1.00g/mL)
Monday, September 23, 2013 at 4:30pm by Cassandra

Chemistry
It appears that all of these posts (this one and the next half dozen or so) are the same kind of problem. Here is how the first one is done. Use this as a template for the others.If you have questions about this one or the others post your work and explain in detail what kind ...
Friday, October 4, 2013 at 9:55pm by DrBob222

chemistry
5.00L propane x (3 mols CO2/1 mol C3H8) = 5.00 x 3/1 = ?
Sunday, April 29, 2012 at 3:55pm by DrBob222

Chemistry
I really don't get this. The calculations shown don't make sense. Demonstrate that work is not a state function by calculating the work involved in expanding a gas from an initial state of 1.00: and 10.0atm of pressure to (a) 10,0 L and 1.0 atm pressure. (b) 5.00L and 2.00 atm...
Friday, November 28, 2008 at 8:55pm by Xi

chemistry
If 20.0g of nitrogen gas has a volume of 4.00L and a pressure of 6.0 atm, what is its temperature?
Tuesday, December 1, 2009 at 6:53pm by Anonymous

chemistry
what mass of potassium hydroxide is required to produce 2.00L of a solution mthat has a pOH of 4.5?
Saturday, May 8, 2010 at 9:26pm by judi

Chem
What is the pH of the solution formed when 0.040mol NaOH(s) is added to 2.00L of 0.020M HCl?
Sunday, November 28, 2010 at 9:00pm by IH

Chem
What is the pH of the solution formed when 0.040mol NaOH(s) is added to 2.00L of 0.020M HCl?
Sunday, November 28, 2010 at 9:01pm by IH

chemistry
what mass of potassium chloride is required to prepare 5.00L of a 2.00M solution of KCL
Monday, October 24, 2011 at 11:46pm by TROUBLED

chemistry
How many moles of NaOH must be added to 1.00L of this solution to increase the PH to 9.25?
Wednesday, July 18, 2012 at 10:46pm by Heather

chemistery
what pressure is exerted by 0.30 mole of CL2 in a 4.00L container at 20 degree C ?
Sunday, December 9, 2012 at 7:05pm by ogb

chemistry
how much ethyl alcohol must be added to 1.00l of water so that the solution will not freeze at -4f
Saturday, March 6, 2010 at 12:39am by me

chemistry
what mass of zinc chloride, zncl2 is required to prepare 5.00l of a 0.450 molar solution
Sunday, December 11, 2011 at 3:48pm by dolly

College chemistry
Calculate the number of grams of silver nitrate required to prepare 2.00L of 0.500 M AgNO3.
Monday, April 6, 2009 at 9:45pm by mysterylvr6

Chemistry
A 5.00L steel cylinder is filled with water vapor at 650mmHg and 100C. Calculate the density of the gas.
Sunday, July 10, 2011 at 11:10pm by Anonymous

Chemistry
How many moles of a gas at 100 degrees celciuos does it take to fill a 1.00L flask to a pressure of 1.50 atm?
Friday, November 19, 2010 at 4:17pm by Natalia

Chemistry
What is the molecular weight of a gas if a 21.0g sample has a pressure of 836mm Hg at 25.0 degrees C in a 2.00L flash?
Tuesday, December 7, 2010 at 1:26pm by Shirley

chemistry
What is molarity of solution made by combining 10.0g of NaOH with enough water to reach a total volume of 2.00L?
Monday, November 21, 2011 at 4:45pm by Sarah

chemistry
What volume of O2 gas, measured at 297K, is needed to completely burn all the methane (CH4) in a 3.00L container at the same T and P?
Monday, March 8, 2010 at 3:41pm by Shannon

science(chem)
An ammonia solution is made by diluting 0.150L of the concentrated commercial reagent until the final volume reaches 1.00L.
Sunday, May 4, 2008 at 2:30pm by JED

Chemistry
P(5.00L)= .446 mol(.0821)(292K) It would look like this right then do I just multiply it all together and divide by the 5.00 L
Tuesday, October 23, 2007 at 12:17am by Lauren

Chemistry
Calculate the pH of 1.00L of a buffer that is 0.120M HNO2 and 0.150M NaNO2 before and after the addition of 1.00mL of 12.0M HCl
Monday, November 8, 2010 at 2:30pm by Amanda

Chemistry
how many grams of bromine will be present in a sample that molar mass of 70.0 g/mol and occupies a 2.00L container at 117 kPa and 35.1C
Friday, March 14, 2014 at 1:28pm by Bernardo

Chemistry
How many kilojoules of heat are absorbed when 1.00L of water is heated from 18 degrees C to 85 degrees C?
Wednesday, May 19, 2010 at 8:39pm by Sarah

chemistry
how much energy is required to heat 1.00L of water from 20degrees celcius to 90degress celcius
Wednesday, September 29, 2010 at 5:27pm by shawn

What mass of propanoic acid, CH3CH2COOH, pKa= 4.87, should be dissolved in water to 2.00L volume in order to produce a pH of 2.50? THANKS! -J
Thursday, February 12, 2009 at 6:27pm by Jude

What mass of propanoic acid, CH3CH2COOH, pKa= 4.87, should be dissolved in water to 2.00L volume in order to produce a pH of 2.50? THANKS! -J
Thursday, February 12, 2009 at 7:46pm by Jude

Chem
So initial mol NaoH= 0.040mol and initial HCl= (.02M)(2.00L)= 0.04mol I don't understand what to do now.
Sunday, November 28, 2010 at 9:00pm by IH

chemistry
calculate the energy required to heat 1.00L of ice at -50.0C to steam at 180.0C
Tuesday, January 17, 2012 at 6:59pm by Jessica

chemistry
how much NaOH would be needed to dissolve in H2Oto prepare 2.00L of a NaOH solution in which [OH-]=0.95 M?
Thursday, March 29, 2012 at 10:03pm by lindsey

Chemistry
A MIXTURE OF 1.00G OF h2 AND 1.00G hE IS PLACED IN A 1.00L FLASK AT 27.0 WHAT ARE THE PARTIAL PRESSURES OF EACH GAS
Friday, March 23, 2012 at 7:02pm by Anonymous

chemistry
a. Find the amount of solute based on this information Volume = 500 ml Concentration of solution= 15% (w/w) Solute (molar mass) = H2SO4 is 98.0g/mol b. Find the molar mass Amount of solute= 117.0g Volume of solution= 2.00L concentration of a solution= 1.0M volume of solvent = ...
Tuesday, November 27, 2012 at 10:30am by vince11

chemistry
a. Find the amount of solute based on this information Volume = 500 ml Concentration of solution= 15% (w/w) Solute (molar mass) = H2SO4 is 98.0g/mol b. Find the molar mass Amount of solute= 117.0g Volume of solution= 2.00L concentration of a solution= 1.0M volume of solvent = ...
Tuesday, November 27, 2012 at 6:16pm by vince11

chemistry
A sample of a gas in a ridge container at 30.0 c has a volume of 2.00L. If its temp increased to 40.0 C What will the new volume be?
Wednesday, February 22, 2012 at 8:41pm by levi

chemistry
A basic buffer is prepared by adding 0.3310g of NH4Cl to 1.00L of 0.2088 M NH3. Kb (NH3) = 1.8x10-5.
Wednesday, March 21, 2012 at 10:11pm by lara

Chemistry help
2.00g of NaOH are dissolved in water to make 2.00L of solution. What is the concentration of hydronium ions, [H3O+], in this solution?
Monday, July 29, 2013 at 7:36pm by Anonymous

Science
Describe and show your calculations on how you would prepare 1.00L of a 0.50M solution of each of the following a.) HCl from "concentrated" (12M) reagent. b.) Sodium Carbonate from the pure solid
Saturday, December 29, 2012 at 9:15pm by Ashok

chemistry
Describe and show your calculations on how you would prepare 1.00L of a 0.50M solution of each of the following a.) HCl from "concentrated" (12M) reagent. b.) Sodium Carbonate from the pure solid
Sunday, January 6, 2013 at 12:12am by Ashok

Chemistry
Describe and show your calculations on how you would prepare 1.00L of a 0.50M solution of each of the following a.) HCl from "concentrated" (12M) reagent. b.) Sodium Carbonate from the pure solid
Sunday, January 6, 2013 at 12:13am by Ashok

Chemistry
Describe and show your calculations on how you would prepare 1.00L of a 0.50M solution of each of the following a.) HCl from "concentrated" (12M) reagent. b.) Sodium Carbonate from the pure solid
Sunday, January 6, 2013 at 12:13am by Ashok

Chemistry
How would you prepare 1.00L of 0.13m solution of sugar, C12H22O11? The density of the resulting solution is 1.10g/mL. m=molality
Tuesday, February 26, 2008 at 2:58pm by Kelsey

Chemistry
A l.00L flask contains 4.40mol of HI at a certain temperature. The Keq at this temperature is 5.0 * 10^-4. What are the concentrations of H2 and I2 at equilibrium?
Monday, December 28, 2009 at 4:35pm by Shawn

college chemistry
2.00g of NaOH are dissolved in water to make 5.00L of solution. What is the concentration of hydronium ions, [H3O+], in this solution?
Sunday, January 24, 2010 at 9:23pm by Anonymous

CHEM
A) a picture shows a container that is sealed at the top by a movable piston. Inside the container is a ideal gas at 1.00atm , 20.0 *C, and 1.00L. (The pic is of a 2L container which has a piston pushed downward to the 1L level. Under the piston, under the 1L mark, is a sample...
Sunday, October 28, 2007 at 8:57pm by K

chemistry - buffers
what mass of sodium acetate should be dissolved in 1.00L of acetic acid, 0.150M concentration, in order to produce a buffer with pH = 4.5?. Ka of CH3COOH = 1.8x10^-5
Monday, April 12, 2010 at 7:38pm by Reen

chem
a.)How many moles of NaOH are required to prepare 2.00L od 0.380M solution? answer is 0.760 mole of NaOH (mole/l * 2.00L) b.)What will be the molarity of a solution if 3.50 g of KOH are dissolved in water to make 150.0 mL of solution? answer is 0.52 M KOH (gKOH/molar mass KOH=...
Friday, November 30, 2012 at 12:34am by Angel Locsin

Basic Chemistry
What is the molar concentration of Na+ in a solution prepared by dissolving 100.0g of Na3PO4 in sufficient H20 to form 2.00L of solution??
Monday, February 28, 2011 at 10:06am by Steph

chemistry
How many cubic centimeters (cm 3 {\rm cm}^3) of olive oil have the same mass as 1.00L L of gasoline? (See the table (Figure 1) .)
Sunday, September 15, 2013 at 5:40pm by uta

chemistry
Given 1.00L of a buffer containing 0.338 M CH3COOH and 0.093 M CH3COONa. Ka(acetic acid) = 1.8 x 10-5. Calculate the pH after the addition of 0.005 moles NaOH.
Sunday, March 18, 2012 at 7:39pm by cathy

chemistry
Given 2.00L of a buffer containing 0.338 M CH3COOH and 0.093 M CH3COONa. Ka(acetic acid) = 1.8 x 10-5. Calculate the pH after the addition of 0.004 moles NaOH.
Wednesday, March 21, 2012 at 11:23pm by reichel

CHEM
What is the molarity of a calcium sulfate solution prepared by adding 27.89g of CaSo4 to sufficient water to make a final solution volume of 1.00L?
Thursday, February 7, 2013 at 9:20pm by Lisa

Chemistry
Please help! Thanks. An ammonia solution is made by diluting 0.105L of the concentrated commercial reagent until the final volume reaches 1.00L. What is the final molar concentration?
Sunday, July 19, 2009 at 2:36pm by Sydney

chemistry
sorry i forgot some of the units in the initial posting 8.00g of NaOH are dissolved in water to make 4.00L of solution. What is the concentration of hydronium ions, , in this solution?
Monday, November 2, 2009 at 9:40am by katy

Chemistry
Consider the following reaction: PCl3 + 3H2O -----> P(OH) + 3HCl if 4.00L of PCl3 react with an excess of H2O at STP, how many grams of HCl would be formed?
Tuesday, May 10, 2011 at 9:55pm by Danna

chem
A solution is prepared by dissolving 75.0 grams of sucrose (C12H22O11) in enough water to produce 1.00L of solution. What is the molarity of this solution?
Monday, December 3, 2012 at 2:29am by antu

CHEMISTRY
could you please check my work? thanks. For the reaction between reactants A and B below, if 4.925 moles of A is placed into a flask with excess B it is found that the amount of A remaining after 6.85 seconds is 2.737 moles. 2A (g) + B (g)-----> 3 C (g) a. find the rate of ...
Thursday, February 21, 2008 at 4:58am by Jonathan

Chemistry
could you please check my work? thanks. For the reaction between reactants A and B below, if 4.925 moles of A is placed into a flask with excess B it is found that the amount of A remaining after 6.85 seconds is 2.737 moles. 2A (g) + B (g)-----> 3 C (g) a. find the rate of ...
Monday, February 25, 2008 at 3:48pm by Kevin

AP Chemistry
Consider ammonia, what is the pH of a buffer solution prepared by adding 15.0 g of ammonium chloride to 5.00L of 0.200 M ammonia? ( the K for NH3 is given to me 1.80 x 10 to the power of -5)
Sunday, April 11, 2010 at 3:51pm by Yamani

chemistry
A 150-mL sample of a .600-mol/L calcium nitrate solution is mixed with a 1.00L of .500-mol/L NaOH(aq). Calculate the mass of precipitate produced in this reacton.
Friday, May 18, 2012 at 8:02pm by Lizzy

science
Describe and show your calculations on how you would prepare 1.00L of a 0.50M solution of each of the following a.) HCl from "concentrated" (12M) reagent. b.) Sodium Carbonate from the pure solid PLEASE SO LOST(explanation of why you did of what woulp help so much) Thank You
Tuesday, January 1, 2013 at 9:03pm by Ashok

chemistry
how many kilojoules of heat are absorbed when 1.00L of water is heated from 18 degrees celsius to 85 degrees celsius?
Monday, March 22, 2010 at 9:10pm by brit

Chem 152
if x moles of PbCl2(s) dissolve in 1.00L of water, how many moles of Pb2+(aq) are produced? how many Cl- produced?
Thursday, November 3, 2011 at 10:40am by kevin

chemistry
what will be the final temperature of a system in which 150.0g of water at 5.0 degrees C are added to 1.00L of water at 90.5 degrees C?
Friday, April 27, 2012 at 10:31pm by RoseBud

Chemistry
what volume, in L, of a 10.0M HCL solution is needed to make 2.00L of 2.00m HCL solution by dilution with water. Thank you

Chem
A 2.00L flask is filled with propane gas(C3H8)at 1.00atm and 15C. What is the mass of propane in the flask?
Monday, April 5, 2010 at 8:49pm by Britt

Chemm
A 2.00L flask is filled with propane gas(C3H8)at 1.00atm and 15C. What is the mass of propane in the flask?
Tuesday, April 6, 2010 at 8:27pm by Courtney

Chemistry
suppose you wanted to dissolve 106 g of Na2co3 in enough H2O to make 6.00L of solution. a) what is the molar mass of Na2CO3 ? b) what is the molarity of this solution ?
Friday, October 15, 2010 at 10:25am by Anonymous

science
how many centimeters cube of olive oil of density 0.92g/ml have the same mass as 1.00L of gasoline of density 0.66g/ml?
Monday, September 2, 2013 at 2:21pm by keziya

could you please check my work? thanks. For the reaction between reactants A and B below, if 4.925 moles of A is placed into a flask with excess B it is found that the amount of A remaining after 6.85 seconds is 2.737 moles. 2A (g) + B (g)-----> 3 C (g) a. find the rate of ...
Wednesday, February 20, 2008 at 6:52pm by Jonathan

Chemistry
How many kilojoules of heat are absorbed when 1.00L of water is heated from 18 degrees C to 85 degrees C? Can you please explain how to do this problem? I do not understand what to do, or understand the formula.
Wednesday, May 19, 2010 at 10:23pm by Sarah

chemistry
an empty jar weighs 1.43 pounds. How much will it weigh when 1.00L of homgenized milk is poured into it? trhe density of homogenized milk is 1.03g/ml. (1 pound= 453.6g)
Friday, April 27, 2012 at 12:49pm by RoseBud

Chemistry
The amount of solute in 1L of 1.80M solution would be the same as that in 1.80/8.00L of the 8.00M solution. So, take 0.225L of the 8M, and fill the flask to 1L.
Wednesday, October 5, 2011 at 10:11am by Steve

ap chemistry
Since these mols are in 1.00L, mols = M. .........2SO2 + O2 ==> 2SO3 E........0.250..0.853...x Kc = (SO3)^2/(SO2)^2(O2) Substitute and solve for x.
Monday, January 28, 2013 at 8:37pm by DrBob222

chemistry
How many moles of sodium acetate CH3COONA must be dissolved in 1.00L of 0.200M acetic acid to make a buffer pH 4.56? ka of acetic acid is 1.76x10^-
Saturday, November 6, 2010 at 5:04pm by linda

chemistry
Ni+4CO=NI(CO)4 this reaction seperates nickel from other solid impurities.Starting with 86.4g NI,calculte the pressure of NI(CO)4 in a container of volume 4.00L
Sunday, November 28, 2010 at 4:56pm by silly

Pages: 1

Search
Members