Friday
December 6, 2013

Posts by Sami

Total # Posts: 101

Physics
In the process of changing a flat tire , a motorist uses a hydraulic jack. She begins applying a force of F1=8.6N to the input piston. As a result, the output plunger applies a force of F2=305N to the car. The height difference between the input piston and the output plunger c...

physics
how can projectile motion be applied in porkour?

physics
A uniform disk with a mass of 27.3 kg and a radius of 0.309 m is free to rotate about a frictionless axle. Forces of 90.0 N and 125 N are applied to the disk, as the drawing indicates. (b) What is the angular acceleration of the disk?

physics
Suppose you need to measure the mass of an object, but have only a 7-kg standard mass and a meter stick. Place a knife edge under the 50-cm mark of the meter stick. Then put the 7-kg standard mass at the 39.1-cm mark and place the object so as to balance the standard mass. If ...

physics
A uniform disk with a mass of 27.3 kg and a radius of 0.309 m is free to rotate about a frictionless axle. Forces of 90.0 N and 125 N are applied to the disk, as the drawing indicates. (a) What is the net torque produced by the two forces? (b) What is the angular acceleration ...

physics
A person is sitting with one leg outstretched, so that it makes an angle of = 39.9o with the horizontal. The weight of the leg below the knee is 34.7 N with the center of gravity located below the knee joint. The leg is being held in this position because of the force M applie...

physics
A ball of radius 0.2m rolls along a horizontal table top with a constant linear speed of 3.04 m/s. The ball rolls off the edge and falls a vertical distance of 2.02m before hitting the floor. What is the angular displacement of the ball while it is in the air.

physics
Find the net torque (magnitude and direction) produced by the forces F1 (F1 = 17.3 N) and F2 (F2 = 26.1 N) about the rotational axis shown in the drawing. The forces are acting on a thin rigid rod, and the axis is perpendicular to the page. (x = 0.323 m, y = 1.021 m, = 28.6°)

physics
Find the net torque (magnitude and direction) produced by the forces F1 (F1 = 17.3 N) and F2 (F2 = 26.1 N) about the rotational axis shown in the drawing. The forces are acting on a thin rigid rod, and the axis is perpendicular to the page. (x = 0.323 m, y = 1.021 m, = 28.6°)

Science
Why does an ion have an electrical charge?

Pages: <<Prev | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | Next>>

Search
Members