Wednesday
December 11, 2013

# Posts by DANNY

Total # Posts: 611

Physics (Stress & Strain)
What is the factory of safety of a steel hanger having an ultimate strength of 630.000MPa and supporting a load of 61000.000N. The steel hanger in question has a cross sectional area of 6.500cm^2. ANS = (Round to 3 decimal places) 6.500cm = 0.065m Load = 61000.000N Ultimate st...

Physic (Stress & Strain)
1) Calculate the tension stress in a 21.00mm diameter rod subjected to a pull of 30.000kN. 21mm =0.021m 30.000kN = 30000N A = pi*d^2/4 = 3.1416 * (0.021)^2m^2/ 4 = 3.1416 * 0.000441/ 4 = 0.0013854456/ 4 = 0.0003463614 Stress = Load/ Area = 30000/ 0.0003463614 = 86614732.47N = ...

Physics (Stress & Strain)
A uniform bar 1.900m in length and having a cross sectional area of 10.500cm^2 is subject to a loading of 5550.000N. This load causes an extension of the bar length of 1.100mm. Calculate the stress and strain produced. Stress = Load/ Area Strain = Change in length/ length cro...

Physics
What is the factor of safety of a steel hanger having an ultimate strength of 550.000MPa and supporting a load of 64000.000N. The steel hanger in question has a cross sectional area of 7.600cm^2 ANS= Round to 3 decimal places Safety factor = design load/ load = 550.000MPa = 55...

Physics
What is the factor of safety of a steel hanger having an ultimate strength of 550.000MPa and supporting a load of 64000.000N. The steel hanger in question has a cross sectional area of 7.600cm^2 ANS= Round to 3 decimal places Safety factor = design load/ load = 550.000MPa = 55...

Physics
A tie bar is made of a material having a tensile strength of 231MPa and has to carry a load of 225kN. What is the diameter of the bar if a factor of safety of 7 is applied? Where do I begin?

Physics
Safety factor = design load/ load = 550.000MPa = 550000000Pa = 550000000/ 64000 = 8593.75 tension design = 550MPa * 0.076M^2 = 18.000 Have I messed thing up?

Physics
Sorry i missed this part of the question: The steel hanger in question has a cross sectional area of 7.600cm^2

Physics
What is the factor of safety of a steel hanger having an ultimate strength of 550.000MPa and supporting a load of 64000.000N. ANS= Round to 3 decimal places Where do I begin?

Physics
A tie bar is made of a material having a tensile strength of 231MPa and has to carry a load of 225kN. What is the diameter of the bar if a factor of safety of 7 is applied? Where do I begin?

Pages: <<Prev | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | Next>>

Search
Members