Questions LLC
Login
or
Sign Up
Ask a New Question
Science
Physics
Agalvanometer of resistance 25 ohmes shows full scale deflection for current of 10mA, to convert it into 100 V range voltmeter , the required series resistance is
1 answer
Vf = If*Rg = 10*10^-3 * 25 = 0.25 Volts.
Rs = (10-Vf)/If.
You can
ask a new question
or
answer this question
.
Similar Questions
A GALVANOMETER WITH COIL RESISTANCE 12.0OHMS SHOWS FULL SCALE DEFLECTION FOR A CURRENT OF 2.5MA HOW WOULD YOU CONVERT IT INTO A
Top answer:
Add a resistor in series with the coil: R+12 = E/I = 10/0.0025 = 4,000, R = 4,000-12 = 3,988 Ohms.
Read more.
an ammeter of resistance 0.1ohms has a full scale deflection of 50mA .
Determine the resultant full scale deflection of the meter
Top answer:
Im = 50 mA = 0.05 A = Current through meter. Ir = 0.10/0.0111 * 0.05A = 0.450A = Current through
Read more.
8. A galvanometer has a coil resistance of 100 ohms and gives a full scale deflection when the potential difference across it is
Top answer:
To solve this problem, we need to calculate the value of the resistor required to convert the
Read more.
A moving coil instrument has a resistance of 75 ohms and gives full scale deflection of 100 scale divisions for a current of
Top answer:
instrument current ... (80/100) * 1 ma shunt is 1/3 the resistance of the instrument ... so, three
Read more.
A galvanometer of resistance 100 gives full scale deflection at 10 mA current. What should be the value of shunt so that it
Top answer:
To calculate the value of the shunt resistor, we can use the formula: \(I_{\text{total}} =
Read more.
A galvanometer needle deflects full scale for 53.0A current. What current will
give full-scale deflection if the magnetic field
Top answer:
To find the current that will give a full-scale deflection when the magnetic field weakens to 0.860
Read more.
When a moving coil galvanometer has a resistance of 20 ohms and gives full scale deflection of 1.5mA.calculate the potential
Top answer:
To calculate the potential difference across the terminals of the moving coil galvanometer, you need
Read more.
A ammeter is to be constructed using a galvanometer that has a 2.00 mA full-scale deflection and internal resistance of 50.0
Top answer:
Va = Ia*Ra = 2*10^-3 * 50 = 0.10 Volts = Voltage across ammeter @ full-scale. Rp=Va/I =
Read more.
A moving-coil instrument gives a full-scale deflection when the current is 40mA and its resistance is 25 Ω. Calculate the
Top answer:
Vm = 0.04 *25 = 1.0 volt across meter @ full-scale. Rs = Vm/I = 1.0/(50-0.04) = 0.020 Ohms.
Read more.
The coil of wire in a galvanometer has a resistance of RC = 78.0 Ù. The galvanometer exhibits a full-scale deflection when the
Top answer:
Vc = I*Rc = 0.44*10^-3 * 78=0.0343 Volts R = Vr/I = (21-0.0343)/0.44*10^-3 = 47,649 Ohms.
Read more.
Related Questions
A 5hp 230volt shunt motor takes 18 amp when operating at full load. The Shunt-field resistance is 115ohms and the armature
A loop circuit has a resistance of R1 and a current of 2.2 A. The current is reduced to 1.7 A when an additional 3 Ω resistor
A voltage V across a resistance R generates a current I=V/R. If a constant voltage of 17 volts is put across a resistance that
A galvanometer of resistance 50 ohm which gives a full deflection for 1mA is to be adapted to measure currents up to 5A.
The amount of current flowing into an electrical circuit varies inversely as the resistance in the circuit. When the resistance
A coil of inductance 0.04henry and negligible resistance is connected in parallel with a 10ohms resistor, across a 240volts
What is the resistance of a 40 watt light bulb if it is it to full brilliance by a current of .33amps?
5 Hp, 230 V shunt motor takes 18 Amperes when operating at full load. The shunt field resistance is 115 ohms and the armature
The wattage rating of an appliance W varies jointly as the square of the current I and the resistance R. If the wattage is 1.5
A voltage V across a resistance R generates a current I=VR. If a constant voltage of 4 volts is put across a resistance that is
