Questions LLC
Login
or
Sign Up
Ask a New Question
Questions
Math
In a load of 3/4 tons of steel roda.1/8 of them are bent. How many steel rods are bent?
1 answer
No one knows, you only talk about tons, not how many rods in a ton.
We can do tons
(1/8)(3/4) = 3/32 ton
You can
ask a new question
or
answer this question
.
Similar Questions
In a load of 3/4 tons of steel roda.1/8 of them are bent. How many steel rods are bent?
Top answer:
(1/8) * (3/4) = _______ tons
Read more.
Here's the problem: In a load of 3/4 ton of steel rods, 1/8 are bent. How many tons of steel rods are bent?
I don't know which
Top answer:
Multiply. (3/4) * (1/8) = ______ ton
Read more.
i have a question that i am unable to answer: in a load of 3/4 ton of steel rods 1/8 of them are bent . How many tons of steel
Top answer:
Multiply: (3/4) * (1/8) = 3/32 ton of bent rods
Read more.
In constructing the Mall of America in Minnesota, a total of 1.3 x 10 (to the 4th power) tons of steel were used. The Eiffel
Top answer:
you will have to divide , not multiply
Read more.
Steel is very stiff, and the Young's modulus for steel is unusually large, 2.0×1011 N/m2. A cube of steel 25 cm on a side
Top answer:
To find the magnitude of the "normal" force that the steel cube exerts on the load, we can use
Read more.
The table shows the proportional relationship between the salvage value and tons of raw steel.
Tons of steel 0 2 4 6 8 10 Salvage
Top answer:
To find the constant of proportionality, we need to determine the rate of change between the salvage
Read more.
5. Two pieces of steel are held together with six bolts. One end of the first piece of steel is welded to a beam and the second
Top answer:
Two pieces of steel are held together with six bolts. One end of the first piece of steel is welded
Read more.
A spiral spring extends by 5cm under a load of 60N.when the load is replaced by a steel block, the new extension is 7cm.
Top answer:
Well, well, well! Looks like we have a springy situation here. Let's get cracking! First things
Read more.
Pyramid corporation is currently employing 20 tons of cement and 40 tons of steel to produce 50 000 square feet of shopping in a
Top answer:
1) To show the situation in an Isoquant-isocost diagram, you would need to plot the inputs, such as
Read more.
The change in length of a steel wire under an applied load can be halved by keeping all other conditions constant but using:
A. a
Top answer:
Wow ... 9 posts in under 6 minutes! You must be taking a test or something. Please know that tutors
Read more.
Related Questions
Use the graph to answer the question.
What led to the increase in steel consumption seen on the graph? A.More people started
Which was the most important effect of the Bessemer process?
It allowed the production of more steel It reduced better steel It
The relative density of a solid steel is 7.8 A. Find the mass of the solid steel cube of side 10cm. B. What volume of steel has
Which was the most important effect of the Bessemer process?
A. It allowed the production of more steel. B. It produced better
Find the diameter of an 18 m(L) long steel wire that will stretch no more than.009 m
AL when a load stress of 3800 N is hung on
Question
Which was the most important effect of the Bessemer process? (1 point) Responses It allowed the production of more
Which was the most important effect of the Bessemer process?
A: it allowed the production of more steel. B: it produced better
A 2.3 kg steel block is at rest on a steel table. A horizontal string pulls on the block. The coefficient of static friction for
A steel ball falls from a stationary air balloon. The mass of the ball is 0,3kg. It strikes the ground with a vertical download
What is the factory of safety of a steel hanger having an ultimate strength of 630.000MPa and supporting a load of 61000.000N.